the enthalpy of formation (ΔHf°) of nitrogen dioxide gas, NO2, is 33.8 kJ/mol. Which equation below correctly represents the chemical equation associated with this enthalpy of formation?
N2(g) + 2O2(g) → 2NO2(g)
N(g) + O2(g) → NO2(g)
N(g) + 2O(g) → NO2(g)
N2(g) + O2(g) → NO2(g)
½ N2(g) + O2(g) → NO2(g)

Increasing the substrate concentration will likely result in the greatest increase in the reaction rate when the substrate concentration is lower than the concentration of the enzyme.

The concentration of the substrate affects the rate of reaction since there is a direct correlation between the number of enzyme-substrate complexes that are formed and the rate of reaction.

When there is more substrate, more enzyme-substrate complexes can form, resulting in an increase in the rate of reaction.

So, it is highly likely that when the substrate concentration is low, increasing the substrate concentration will result in the greatest increase in the reaction rate.

However, when the substrate concentration is already high, the reaction rate may not continue to increase as a result of increasing the substrate concentration.

Learn more about substrate concentration here:

https://brainly.com/question/22428921

#SPJ11

Electrons have a negative electrical charge, whereas protons have a positive charge.

Subatomic particles like electrons and protons are essential in defining how atoms and molecules behave. Electrons are negatively charged particles that move in shells or energy levels around an atom's nucleus. The positive charge of protons and the negative charge of electrons are identical in magnitude but diametrically opposed in sign. Together with neutral neutrons, protons are positively charged particles that make up an atom's nucleus. An atom's proton count establishes the element it belongs to. Atoms' chemical activity, particularly their capacity to form chemical bonds and reactions, is greatly influenced by the charges of their protons and electrons.

learn more about Subatomic particles here:

https://brainly.com/question/29765133

#SPJ4

The following are the rules for recognizing and naming binary molecular compounds from their chemical formulas:
1. The first element in the chemical formula will be the name of the first element in the compound.
2. The second element in the chemical formula will be the name of the second element in the compound.
3. If the first element is a metal, the second element will end in “-ide”.
4. If the first element is a nonmetal, the second element will end in “-ate” or “-ite”.
5. The prefixes “mono-, di-, tri-, tetra-, penta-, and hexa-” are used to indicate the number of atoms of each element in the compound.
6. When the prefixes are not used, the number of atoms of each element is implied by the subscript.
7. If the subscript is written as a fraction, the fraction is changed to a whole number when forming the compound name.

Learn more about molecular compounds  at  brainly.com/question/30328923

#SPJ4

The rules for recognizing and naming binary molecular compounds are written focusing on the lower groups and the higher groups.

The rules for recognizing and naming binary molecular compounds from their chemical formulas are as follows:

1. The element with the lower group number is written first in the formula, and its full name is used.

2. The element with the higher group number is written second in the formula, and its stem name is used along with the suffix -ide.

3. The prefixes mono-, di-, tri-, tetra-, penta-, and so on are used to indicate the number of atoms present for each element in the molecule.

4. The prefix mono- is omitted for the first element in the formula.

5. The ending -a or -o in the prefix is omitted if the element name begins with a vowel, and only the vowel of the prefix is used in the compound name.

To learn more about compounds, click here:

https://brainly.com/question/26487468

#SPJ11

Al(NO3)3 solution concentration and the concentration of H3O+ ions in the solution following the addition of HNO3 are given in the problem. We can determine the presence of [Al(H2O)5(OH)2+] in the solution using this knowledge along with the known equilibria for the hydrolysis of Al3+.

For Al3+, the hydrolysis process may be expressed as follows:

Al(H2O)63+ + water becomes Al(H2O)5(OH)2+ + H3O+.

The reaction's equilibrium constant expression is as follows:

Al(H2O)5(OH)2+) = K

Al(H2O)63+ / [H3O+]

We must take into account the dissociation of Al(NO3)3 in water in order to determine [Al(H2O)5(OH)2+] in a 0.15 M solution of Al(NO3)3:

Al3+ (aq) + 3NO3- Al(NO3)3 (s) (aq)

Al3+ has a concentration of 0.45 M (3 times that of the Al(NO3)3 solution) in an Al(NO3)3 solution with a concentration of 0.15 M. H3O+ is present in the solution at a concentration of 0.10 M.

learn more about Al(NO3)3 solution here:

https://brainly.com/question/14215622

#SPJ4

A student makes three plots of their data and finds that a plot of [A] vs t is linear, a plot of ln[A] vs t is non-linear, and a plot of 1/[A] vs t is non-linear. The rate law of the reaction is b. Rate = k[A]

The given question is related to the rate law of the reaction. The student makes three plots of their data and finds that a plot of [A] vs t is linear, a plot of ln[A] vs t is non-linear, and a plot of 1/[A] vs t is non-linear. The rate law of a reaction is a mathematical equation that relates the rate of the reaction to the concentrations of reactants and the reaction's constant of proportionality. The rate law is also called the rate equation or rate expression.

As per the given information, the plot of [A] vs t is linear, which means that the reaction is a first-order reaction. The plot of ln[A] vs t is non-linear, which means that the reaction is not zero-order or first-order. It could be a second-order or third-order reaction. The plot of 1/[A] vs t is non-linear, which means that the reaction is not a first-order reaction. It could be a second-order or third-order reaction. Therefore, the rate law of the reaction can be given as Rate = k[A]. This represents a first-order reaction. Hence, the correct option is Rate = k[A].

Learn more about rate law at:

https://brainly.com/question/14779101

#SPJ11

When it comes to titration, a titration curve is the representation of the change in pH with regards to the volume of titrant added.

The point of equivalence is where the stoichiometric amount of titrant reacts completely with the analyte being titrated.

There are several types of titration curves. Below are the classifications of each titration curve:

Strong acid titrated with a strong base. The titration curve for this scenario starts out with a pH of around 3.0, which is the pH of a strong acid. The pH rises until the equivalence point is reached. The pH then drops steeply after the equivalence point.

Strong base titrated with a strong acid. In this titration curve, the pH starts off around  .11, which is the pH of a strong base. The pH drops rapidly until the equivalence point is reached. The pH then rises steeply after the equivalence point.

Weak acid titrated with a strong base. In this titration curve, the pH starts off slightly acidic due to the presence of the weak acid. The pH rises gradually until the equivalence point is reached. The pH then increases steeply after the equivalence point.

Weak base titrated with a strong acid. The pH starts off slightly basic in this titration curve due to the weak base. The pH decreases gradually until the equivalence point is reached. The pH then drops steeply after the equivalence point.

Polyprotic acid titrated with a strong base. In this titration curve, there are more than one equivalence point because the acid is capable of releasing more than one hydrogen ion.

Each equivalence point represents the point at which one mole of H+ is neutralized.

For more information about titration curve refer here

https://brainly.com/question/29590776?

#SPJ11

Answer:

To calculate the molarity of a calcium carbonate (CaCO3) solution, we first need to convert the volume of water from milliliters (mL) to liters (L).

Volume of water = 125 mL = 0.125 L

Next, we need to use the number of moles of CaCO3 and the volume of water to calculate the molarity:

Molarity = number of moles / volume of solution

Molarity = 2.00 mol / 0.125 L

Molarity = 16.0 M

Therefore, the molarity of the calcium carbonate solution is 16.0 M. However, it's important to note that this concentration is not physically possible as the solubility of calcium carbonate in water is relatively low. Therefore, it's likely that the amount of calcium carbonate that actually dissolves in 125 mL of water is much less than 2.00 moles, making the actual molarity much lower.

(Please could you kindly mark my answer as brainliest)

Answer:

chelated zinc is more easily absorbed than zinc on it's own.

The new volume of the helium gas sample will be  124 ml. This is due to the fact that when the temperature decreases while the pressure remains constant, the volume of a gas will increase.

According to Charles’s law, the volume of a given gas at a constant pressure is directly proportional to its absolute temperature. Therefore, a decrease in temperature, while holding constant the pressure of the helium gas, would result in a decrease in volume.

A constant pressure is the one under which the pressure of a substance remains unchanged as the temperature and/or volume of the substance change. Charles's law may be used to explain the properties of gases, particularly with constant pressure since it states that the volume of a given mass of a gas is directly proportional to its absolute temperature, provided that its pressure remains constant. It's written as:V1/T1 = V2/T2; whereV1 = 620 ml; T1 = 500K; T2 = 100KLet's put the values in the formula given above. The [tex][tex]620/T1 = V2/100V2 = 62,000/500V2 = 124 ml[/tex].[/tex]Therefore, the new volume of helium gas at a temperature of 100K would be 124 ml.

Read more about the volume :

https://brainly.com/question/463363

#SPJ11

D. Running water at 135 F (57 C) or lower, or a container of water at 135 F (57 C) or lower.

The atmosphere, which is represented by Area 1, is the main source of nitrogen on Earth. About 78% of the Earth's atmosphere is made up of nitrogen gas (N2), which is essential to numerous industrial and biological processes.

Sadly, I am unable to give a precise response without access to the question's referenced illustration. I can, however, give some general knowledge about the nitrogen cycle and the various nitrogen reserves on Earth.

The environment contains nitrogen, an element that is necessary for life, in a variety of forms, including nitrogen gas (N2), ammonia (NH3), nitrite (NO2), nitrate (NO3-), and organic nitrogen. A number of biological and chemical mechanisms are used in the nitrogen cycle to change nitrogen's form and transfer it through various reservoirs.

The atmosphere, which contains around 78% nitrogen gas, is the planet's biggest source of nitrogen. Unfortunately, most organisms cannot access atmospheric nitrogen directly; instead, it must be transformed into a useful form through  nitrogen fixation. Nitrogen fixation is the process of converting atmospheric nitrogen into ammonia or other organic nitrogen compounds, which can be taken up by plants and other organisms.

learn more about nitrogen gas  here:

https://brainly.com/question/11426882

#SPJ4

Ion channels that open and close in response to a change in membrane potential are called voltage-gated ion channels.

Voltage-gated ion channels are a specialized type of membrane protein that are embedded in the lipid bilayer of excitable cells. They have a pore that allows ions to flow through, and they can be selective for different types of ions, such as sodium (Na+), potassium (K+), or calcium (Ca2+).

The opening and closing of the channel's pore is controlled by changes in the membrane potential, which is the difference in electrical charge across the cell membrane.

These channels are crucial for the generation and propagation of electrical signals in excitable cells, such as neurons and muscle cells. Voltage-gated ion channels are capable of detecting small changes in membrane potential and responding by opening or closing their pore, allowing ions to flow across the membrane and alter the electrical state of the cell.

Learn more about ion channels here: https://brainly.com/question/12578279

#SPJ1

Answer:

Answer: The final volume of the gas will be 8.07 L.

Approximate number of tubes Amelia can fill = 8.07 L/500 mL = 16.14 tubes.

(i).The mass of ammonia produced is 2.43 x 10^3 g. (ii) The 71.4 moles of dinitrogen react with 214.2 moles of dihydrogen to produce 142.8 moles of ammonia. (iii) Mass of ammonia produced in given reaction with 1 gram of dinitrogen and 3 grams of dihydrogen is 1.22 g.

Using the given masses of dinitrogen and dihydrogen, we can calculate moles of each:

dinitrogen = mass/molar mass = 2.00 x 10^3 g/28 g/mol = 71.4 mol,

dihydrogen = mass/molar mass = 1.00 x 10^3 g/2 g/mol = 500 mol

The mass of ammonia produced can be calculated as:

[tex]Mass of ammonia = moles * molar mass = 142.8 mol * 17 g/mol = 2.43 * 10^{3 }g[/tex]

Therefore, the mass of ammonia produced is 2.43 x 10^3 g.

We can calculate the mass of ammonia produced using the equation:

[tex]mass = number of moles * molar mass = 2 * 0.0356 * 17.03 = 1.22 g[/tex]

To know more about dinitrogen, here

brainly.com/question/9909261

#SPJ4

In the pictured cell, the side containing zinc is the anode and the side containing copper is the cathode. The purpose of the Na2SO4 is to facilitate the transfer of electrons from the anode to the cathode.

A cell is a unit of life that is the smallest and most simple living organism, it can be classified as a complete organism, with all of the components that make up a living being, including DNA, membranes, and organelles. A voltaic cell is a device that converts chemical energy into electrical energy, it is also known as a galvanic cell or a Daniell cell. It is made up of two different metals that are submerged in an electrolyte solution that enables the transfer of electrons from one electrode to the other. The anode is the electrode that oxidizes and loses electrons during a redox reaction, this electrode is negatively charged, as it is the site of the oxidation reaction that releases electrons and generates an electrical current.

A cathode is an electrode that is reduced and gains electrons in a redox reaction, this electrode is positively charged and acts as a sink for electrons, absorbing them and using them to create a reduction reaction that generates an electrical current. The Na2SO4 in the pictured cell is an electrolyte solution that facilitates the transfer of electrons from the anode to the cathode. The salt dissociates into Na+ and SO42- ions, which then migrate toward the anode and cathode, respectively, where they can participate in redox reactions that generate an electrical current. This flow of ions helps to maintain a balance of charge in the cell and enables the transfer of electrons to occur more efficiently.

Learn more about anode at:

https://brainly.com/question/17109743

#SPJ11

The organelle that breaks down chemicals in the cell is the lysosome.

Lysosomes are membrane-bound organelles that contain digestive enzymes that are responsible for breaking down various biomolecules, such as proteins, nucleic acids, carbohydrates, and lipids, into their constituent building blocks. These enzymes are able to break down these molecules through hydrolysis, where water is used to break the chemical bonds. Lysosomes play a crucial role in maintaining cellular homeostasis by removing unwanted or damaged cellular components, recycling macromolecules, and its defending against invading microorganisms. Dysfunction of lysosomes can lead to a variety of diseases known as lysosomal storage disorders.

To know more about Lysosomes, here

brainly.com/question/28202356

#SPJ4

The concentrations of A and B in the reaction after a time of about 75 seconds are 0.0465 M.

The initial concentration of AB is 0.290M. The reaction mixture initially contains no products. The reaction time is 75 seconds, and you need to determine the concentration of A and B. The balanced chemical equation of the reaction is as follows: AB → A + B

According to the law of chemical equilibrium, the concentration of products and reactants changes until a state of equilibrium is reached. As a result, the initial concentration of AB decreases, while that of A and B increases by the same amount. At equilibrium, the rate of the forward reaction is the same as the rate of the backward reaction. As a result, the concentration of the reactants and products remains constant for a long period of time, and the reaction has reached equilibrium. As a result, it is important to identify whether or not the reaction has reached equilibrium. The concentration of A and B is calculated using the following formula:

[A] = C₀ - x

[B] = C₀ - x

[AB] = C₀ - x

Here, x is the amount of the substance that has reacted. Since, we know the initial concentration of AB, we can solve for the value of x. We will then use the value of x to compute the concentrations of A and B. For a reaction, the initial concentration of AB is 0.290M. The reaction mixture initially contains no products. The reaction time is 75 seconds, and you need to determine the concentration of A and B.

The given reaction can be balanced as follows: AB → A + B. Let's assume that at equilibrium, the amount of A and B produced is "x."

[AB] = C-x

Let's calculate the equilibrium concentration of AB:

[AB] = C₀ - x = 0.290 M - x

At equilibrium, the concentrations of A and B are equal since they are produced in equal amounts. Using the law of chemical equilibrium, we can construct the equilibrium constant expression for the reaction:

Kc =x²{0.290 - x}

The equilibrium concentration of AB is 0.290 M - x. The equilibrium concentration of A and B is: x². The equilibrium constant expression can be used to find the value of x. Put the value of [AB], [A], and [B] in the formula of equilibrium constant expression: Kc = x²{0.290 - x}

5.26 = x²{0.290 - x}

{x=0.093}

After solving for x, we get the value of 0.093 M. Therefore, the concentration of A and B at equilibrium is:

[A] = [B] = x{2} = {0.093}{2} = 0.0465

Hence, the concentrations of A and B after 75 seconds are 0.0465 M.

Learn more about Equilibrium concentration here:

https://brainly.com/question/16645766

#SPJ11

When flour is mixed with water, an elastic network forms as gliadin and glutenin combine, and this is known as gluten. It is both elastic and plastic and can expand with the inner pressure of gases (air, steam, and co2), allowing the bread to expand with the action of yeast.

Gluten is a mixture of two proteins, gliadin and glutenin, which gives wheat dough its elastic and viscoelastic properties. When flour is mixed with water, the gluten forms an elastic network that can expand with the inner pressure of gases (air, steam, and CO2). This allows bread to rise with the action of yeast, making it light and fluffy. Gluten is also responsible for the chewy texture of bread and other baked goods that use wheat flour.

Gluten is found in wheat, barley, and rye. People with celiac disease or gluten intolerance are unable to digest gluten, and consuming it can cause a range of symptoms, including diarrhea, bloating, and abdominal pain. As a result, they must follow a gluten-free diet. Gluten-free flours made from rice, corn, and other grains can be used as a substitute for wheat flour in many recipes.

Learn more about celiac disease here: https://brainly.com/question/16779711

#SPJ11

76 grams of potassium chloride will not dissolve in 100 grams of water at 20°C.

The solubility of potassium chloride in water at 20°C is approximately 34 grams per 100 grams of water.

So, if 100 grams of water can dissolve 34 grams of potassium chloride, then the maximum amount of potassium chloride that can be dissolved in 100 grams of water at 20°C is 34 grams.

Therefore, the amount of potassium chloride that will not dissolve in 100 grams of water at 20°C is:

110 grams - 34 grams = 76 grams

Learn more about solubility here: https://brainly.com/question/23946616

#SPJ1

There are approximately 4.5 x 10^23 atoms in 0.75 mol of H2O.

Or 4,500,000,000,000,000,000,000.

Answer: -230 N

Explanation:

The electrical force between two point charges q1 and q2 separated by a distance r is given by Coulomb's law:

F = k * (q1 * q2) / r^2

where k is the Coulomb constant, q1 and q2 are the magnitudes of the charges, and r is the distance between them.

In this case, we have a positive charge and a negative charge, which means that q1 and q2 have opposite signs. Let's assume that the positive charge has a magnitude of q and the negative charge has a magnitude of -q. Then, the electrical force between them can be calculated as:

F = k * (q * (-q)) / r^2 = -k * q^2 / r^2

Substituting the given values of e and k, we get:

F = - (8.99 × 10^9 N m^2/C^2) * (1.6 × 10^-19 C)^2 / (10^-15 m)^2 ≈ -230 N

Note that the negative sign indicates that the force is attractive, which is expected for opposite charges. Therefore, the correct answer is:

-230 N.

Approximately 5.78 grams of glucose must be consumed to sustain a power output of 25 W for one hour.

Power = Energy/Time

25 W = Energy/3600 s

Energy = 25 W x 3600 s = 90000 J

C6H12O6 + 6O2 → 6CO2 + 6H2O + energy

The energy produced by the complete oxidation of glucose is approximately 2.8 x 10^6 J/mol. Therefore, to produce 90,000 J of energy, we need to divide 90,000 J by the energy produced per mole of glucose:

90,000 J / (2.8 x 10^6 J/mol) = 0.0321 mol

The molar mass of glucose is approximately 180 g/mol. Therefore, the mass of glucose required to sustain a power output of 25 W for one hour is:

0.0321 mol x 180 g/mol = 5.78 g

Power in physics is defined as the rate at which work is done or energy is transferred. It is a scalar quantity that measures how quickly a certain amount of energy is being transferred or converted from one form to another. The standard unit for power is the watt (W), which is equivalent to one joule per second (J/s).

In more mathematical terms, power is given by the formula P = W/t, where P represents power, W represents work, and t represents time. Power is also related to force and velocity through the equation P = Fv, where F represents force and v represents the velocity.

Power is an important concept in physics and engineering, as it is used to describe the performance of machines, engines, and other energy conversion systems. The greater the power of a system, the more work it can do in a given amount of time, and the faster it can accomplish a task.

To learn more about Power visit here:

brainly.com/question/13937812

#SPJ4

At the resting membrane potential, the membrane is most permeable to potassium ions (K+), which move out of the cell due to its concentration gradient and the negative charge inside the cell.  Correct answer is option: E.

This movement of K+ ions out of the cell contributes to the negative resting membrane potential of approximately -70 mV in most cells.  The resting membrane potential is maintained by the selective permeability of the cell membrane, which allows for the movement of certain ions across the membrane. In general, the membrane is less permeable to sodium (Na+) and chloride (Cl-) ions at rest, and the movement of these ions across the membrane is limited. Thus, option E "potassium" is the correct answer.

To know more about resting membrane, here

brainly.com/question/8438145

#SPJ4

The net ionic equation for the reaction between [tex]Ba(OH)_2(aq) and H_2SO_^4 (aq)  is :2Ba^2^+(aq) + SO_4^2^-(aq) + 2H^+(aq) ⇒ 2Ba^2^+(aq) + 2H_2O[/tex]

When the following two solutions are mixed:

[tex]K_2CO_3(aq) + Fe(NO_3)_3(aq)[/tex], the mixture contains the following ions:

[tex]NO_3- (aq), Fe^3+, CO_3^ 2-, K^+[/tex]. The spectator ions are NO3- (aq) and K+, and the ions that react are Fe3+ and CO3 2-.

Hence , The correct net ionic equation, including all coefficients, charges, and phases, for the reactants [tex]Ba(OH)_2(aq) + H_2SO_4(aq) [/tex] is 2Ba^2^+(aq) + SO_4^2^-(aq) + 2H^+(aq) ⇒ 2Ba^2^+(aq) + 2H_2O[/tex] .
To know more about Ionic equation refer here :

https://brainly.com/question/11510759

#SPJ11

Answer:

a) Ethanol + K2Cr2O7 / H+ / Reflux → Acetaldehyde

CH3CH2OH + [O] → CH3CHO

b) Ethanol + K2Cr2O7 / H+ / Distil → Ethene

CH3CH2OH + [O] → CH2=CH2 + H2O

c) Propan-1-ol + K2Cr2O7 / H+ / Reflux → Propanal

CH3CH2CH2OH + [O] → CH3CH2CHO

d) Propan-2-ol + K2Cr2O7 / H+ / Reflux → Propanone (acetone)

(CH3)2CHOH + [O] → (CH3)2CO

e) 3-Methylbutan-1-ol + K2Cr2O7 / H+ / Reflux → 3-Methylbutanal

CH3CH(CH3)CH2CH2OH + [O] → CH3CH(CH3)CH2CHO

f) 4-Chloropentan-1-ol + K2Cr2O7 / H+ / Distil → 4-Chloropentanal

Cl(CH2)3CH2CH(OH)CH3 + [O] → Cl(CH2)3CH2CH=O + H2O

(please could you kindly mark my answer as brainliest)

The standard reduction potential of the cathode half-reaction is -0.36V,

The standard reduction potential of the anode half-reaction is +0.34V,

and the standard potential of the cell is -0.02V.

The cathode half-reaction is the reduction of iron (Fe²⁺) to iron (Fe):

Fe²⁺ + 2e⁻ -> Fe; E°cathode = -0.36V.

The anode half-reaction is the oxidation of copper (Cu) to copper (Cu²⁺):

Cu -> Cu²⁺ + 2e⁻; E°anode = +0.34V.
The standard potential of the cell is determined by subtracting the standard reduction potential of the anode from the standard reduction potential of the cathode:

E°cell = E°cathode - E°anode

= -0.36V - (+0.34V)

= -0.02V.

Learn more about the standard potential of the cell here:

https://brainly.com/question/19036092

#SPJ11

If the reaction quotient (Q) is smaller than the equilibrium constant (K) for a reaction, then the reaction will proceed towards the right, i.e., in the direction of the products. The correct option is (b).

This is because the forward reaction is favored over the reverse reaction as there is less number of products present, and the system tends to minimize the stress caused by an increase in the number of reactants. Here, stress refers to the difference between Q and K.

In other words, if Q < K, then the system has less number of products than it should at equilibrium. Hence, the reaction proceeds in the forward direction to increase the number of products until Q = K. After this point, the reaction reaches equilibrium, and the rates of the forward and reverse reactions become equal.

In contrast, if Q > K, then the system has more products than it should be at equilibrium. Hence, the reaction proceeds in the reverse direction to decrease the number of products until Q = K. After this point, the reaction reaches equilibrium, and the rates of the forward and reverse reactions become equal.

Therefore, option (b) is the correct answer. The reaction will proceed to the right (product side) if Q is smaller than K.

To know more about equilibrium constant, refer here:

https://brainly.com/question/15118952#

#SPJ11

A good starting point for citation chaining would be a relevant and well-cited article or book that directly relates to your research the topic.

This article or book should have a comprehensive bibliography or  the reference list that you can use to find additional sources. By examining the references cited in the original article, you can identify the other articles and books that are likely to be relevant to your research. Then, you can examine the references in those articles to find even more sources, continuing the process until you have a comprehensive set of relevant sources for your research.

To know more about citation chaining, here

brainly.com/question/29413043

#SPJ4

Answer:

Cobalt, Nickel, Chromium, and Copper