PLEASE HELP WILL GIVE BRAINLIEST!!!
Refining aluminum takes place in steel vats lined with graphite. What function does the graphite lining serve?
A. It is the cathode.
B. It is the anode.
C. It soaks up the waste oxygen released from bauxite (Al2O3)
D. It serves as a grounding layer to prevent electrical surges.

Answer:

[tex]\mathbf {density \ d =4.4845 \ g/cm^3}[/tex]

Explanation:

Let recall the crystal structure of CsBr obtains a BCC structure. In a BCC structure, there exist only two atom per cell.

The density d of CsBr in g/cm³ can be calculated by using the formula:

[tex]\mathtt{ density \ d = \dfrac{z \times molar\ mass \ (M)}{ edge \ length \ (a) \ \times avogadro's \ number \ (N)}}[/tex]

where;

z = 1 mole of CsBr

edge length = 428.7 pm = (4.287 × 10⁻⁸)³ cm

molar mass of CsBr = 212.81 g/mol

avogadro's number = 6.023 × 10²³

[tex]\mathtt{ density \ d = \dfrac{1 \times 212.81}{(4.287 \times 10^{-8})^3 \times 6.023 \times 10^{23}}}[/tex]

[tex]\mathtt{ density \ d = \dfrac{ 212.81}{47.4540533}}[/tex]

[tex]\mathbf {density \ d =4.4845 \ g/cm^3}[/tex]

Answer:

Al(s)<NaF(s)<HF(g)<SiH4(g)<SiF4(g)

Explanation:

Hello,

In this case, we can arrange the increasing order of entropy at 25 \°C by taking into account, at first, that since solids are more molecularly organized than gases, the first we have solid sodium fluoride and solid aluminium, but in this case, as the higher the molar mass, the higher the entropy, the molar mass of aluminium is 27 g/mol and 42 g/mol for sodium fluoride, therefore, we first have:

Al(s)<NaF(s)

Afterwards, since the molar mass of hydrogen fluoride (HF), silicon fluoride (SiF4) and silane (SiH4) are 20, 104 and 32 g/mol respctively, since silicon fluoride has the greater molar mass, it also has the higher entropy. In such a way, the overall order turns out:

Al(s)<NaF(s)<HF(g)<SiH4(g)<SiF4(g)

Best regards.

Answer:

W = 278.64375 Joules

Explanation:

The information given in this problem are;

Initial volume = 0L

Final volume = 2.50L

ΔV = 2.50 - 0 = 2.50 L

External pressure, P =  1.10 atm

Work = ?

These parameters are related by the equation;

w = - P ΔV

W = - (1.10 )(2.50)

W = 2.75 L atm

Upon conversion to joules;

1 liter atmosphere is equal to 101.325 joule

W = 278.64375 Joules

Answer:

There are required 70.1 years for the activity of a sample of cesium-137 to fall to 20.0 percent of its original value

Explanation:

The radioactive decay follows always first-order kinetics where its general law is:

Ln[A] = -Kt + ln[A]₀

Where [A] is actual concentration of the atom, k is rate constant, t is time and [A]₀ is initial concentration.

We can find rate constant from half-life as follows:

Rate constant:

t(1/2) = ln 2 / K

As half-life of Cesium-137 is 30.2 years:

30.2 years = ln 2 / K

K = 0.02295 years⁻¹

Replacing this result and with the given data of the problem:

Ln[A] = -Kt + ln[A]₀

Ln[A] = -0.02295 years⁻¹* t + ln[A]₀

Ln ([A] / [A₀]) = -0.02295 years⁻¹* t

As you want time when [A] is 20% of [A]₀, [A] / [A]₀ = 0.2:

Ln (0.2) = -0.02295 years⁻¹* t

70.1 years = t

Answer:

0.100 moles of barium sulfate are produced from 0.100 moles of barium chloride.

Explanation:

Barium chloride and sodium sulfate react according to the following balanced reaction:

BaCl₂ + Na₂SO₄ → BaSO₄ + 2 NaCl

By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of reagent and products participate in the reaction:

Then you can apply the following rule of three: if 1 mole of BaCl₂ produces 1 mole of BaSO₄, 0.100 mole of BaCl₂ how many moles of BaSO₄ does it produce?

[tex]amount of moles of BaSO_{4} =\frac{0.100 mole of BaCl_{2}* 1 mole of BaSO_{4} }{1 mole of BaCl_{2}}[/tex]

amount of moles of BaSO₄= 0.100

0.100 moles of barium sulfate are produced from 0.100 moles of barium chloride.

Answer:

The liquid that is often used in thermometers is chrome.

It is khwon for raising its volule when the temperature raises and vice-versa. ● the temperature and the volume are proprtional to each other so using Mathematics, scientists have figured out a way to benefit from it to make a thermometer.

Answer: d=2000 g/L

Explanation:

Density is mass/volume. The units are g/L. Since we are given mass and volume, we can divide them to find density. First, we need to convert kg to g.

[tex]10kg*\frac{1000g}{1kg} =10000 g[/tex]

Now that we have grams, we can divide to get density.

[tex]d=\frac{10000g}{5 L}[/tex]

d=2000g/L

Answer:

Lies predominantly to the left.

Explanation:

In the reaction:

NH4⁺(aq) + Br-(aq) ⇄ NH3(aq) + HBr(aq)

Conjugate acid + Ion ⇄ weak base + strong acid

HBr is a strong acid whereas NH3/NH4⁺ are the weak base and its conjugate base. A strong acid as HBr dissociates completely in solution as H⁺ and Br⁻. That means in solution you will never have HBr without dissociation doing the reaction:

Answer:

Molecular mass of HNO₃ = 63.015 g/mol

Explanation:

Note: The given question is incomplete , the given substance is nitric acid

Given:

Nitric acid (HNO₃)

Find:

Molecular mass

Computation:

Molecular mass of HNO₃ = 1.008 + 14.007 + 3(16)

Molecular mass of HNO₃ = 1.008 + 14.007 + 48

Molecular mass of HNO₃ = 63.015 g/mol

Answer:

a) Monomers: monomers are unit molecules, that can react together with other monomers, to form a long chain molecule called a polymer. Th polymer formed can also be in a three dimensional network. The process of this conversion of monomers to polymers is called polymerization.

b) Repeating unit: A repeating unit is a unit of the polymer formed, whose repetition would produce a long complete polymer chain. A polymer is made up of these repeating links of molecules that form a long chain of molecules.

c) Condensation polymerization: This is a form of condensation reaction, that involves the combination of molecules into polymers with the loss of small molecules such as water or methanol as by products.

d) Cross-linked polymer: This is a polymer formed from a type of bonding of molecules. The bonding is usually in the form of covalent bonds or ionic bonds and the polymers can be either synthetic polymers or natural polymers.  The cross-links leads to an alteration in the physical properties of the polymer.

The definition of following terms are :

a) Monomers:

The monomers are unit atoms, that can respond in conjunction with other monomers, to create a long chain molecule called a polymer.

The polymer shaped can too be in a three dimensional arrange.

b) Repeating unit:

A rehashing unit may be a unit of the polymer shaped, whose reiteration would produce a long total polymer chain.

A polymer is made up of these rehashing joins of atoms that shape a long chain of molecules.

c) Condensation polymerization:

This is often a frame of condensation response, that includes the combination of particles into polymers with the misfortune of little particles such as water or methanol as by products.

d) Cross-linked polymer:

This can be a polymer shaped from a sort of holding of particles.

The cross-links leads to an modification within the physical properties.

Definition is a rhetorical style that uses various techniques to impress upon the reader the meaning of a term, idea, or concept.

Definition may be used for an entire essay but is often used as a rhetorical style within an essay that may mix rhetorical styles.

Learn more about "Polymers":

https://brainly.com/question/17804565?referrer=searchResults

Answer:

The correct answer is 1) 56 ml and 2) 0.314 M

Explanation:

1. The reaction taking place in the given case is,  

HClO₃ + KOH ⇒ KClO₃ + H2O, the molarity of HClO₃ given is 0.100 M, the molarity of KOH given is 0.140 M and the volume of KOH given is 40 ml, there is a need to find the volume of HClO₃.  

Therefore, the mole of HClO₃ = mole of KOH

= MHClO₃ × VHClO₃ = MKOH × VKOH

= 0.100 M × VHClO₃ = 0.140 M × 40 ml

VHClO₃ = 0.140 M × 40 ml/0.100 M

VHClO₃ = 56 ml.  

2. The reaction taking place is,  

2HNO₃ + Ba(OH)₂ ⇒ Ba(NO₃)₂ + 2H₂O

The volume of HNO₃ given is 25 ml, the molarity of Ba(OH)2 is 0.250 M, the volume of Ba(OH)2 is 15.7 ml, the n or the number of moles of HNO₃ is 2, and the n of Ba(OH)2 is 1, the concentration or M of HNO₃ is,  

M₁V₁/n₁ = M₂V₂/n₂

M₁ × 25/ 2 = 0.25 × 15.7/1

M₁ or molarity of HNO₃ = 0.314 M

1. The volume of HClO₃ required to neutralize the KOH is 56.0 mL

2. The concentration of the original HNO₃ solution is 0.314 M

1.

First, we will write a balanced chemical equation for the reaction

The balanced chemical equation for the reaction is

HClO₃ + KOH → KClO₃ + H₂O

This means,

1 mole of HClO₃ is required to neutralize 1 mole of KOH

From the titration formula

[tex]\frac{C_{A}V_{A} }{C_{B}V_{B}} = \frac{n_{A}}{n_{B}}[/tex]

Where

[tex]C_{A}[/tex] is the concentration of acid

[tex]C_{B}[/tex] is the concentration of base

[tex]V_{A}[/tex] is the volume of acid

[tex]V_{B}[/tex] is the volume of base

[tex]n_{A}[/tex] is the mole ratio of acid

[tex]n_{B}[/tex] is the mole ratio of base

From the given information,

[tex]C_{A} = 0.100 \ M[/tex]

[tex]C_{B} = 0.140 \ M[/tex]

[tex]V_{B} = 40.0 \ mL[/tex]

From the balanced chemical equation

[tex]n_{A} = 1[/tex]

[tex]n_{B} =1[/tex]

Putting the values into the formula, we get

[tex]\frac{0.100 \times V_{A} }{0.140 \times 40.0} = \frac{1}{1}[/tex]

∴ [tex]0.100 \times V_{A} = 0.140 \times 40.0[/tex]

[tex]V_{A}=\frac{0.140\times 40.0}{0.100}[/tex]

[tex]V_{A}=\frac{5.60}{0.100}[/tex]

[tex]V_{A}=56.0 \ mL[/tex]

Hence, the volume of HClO₃ required to neutralize the KOH is 56.0 mL

2.

First, we will write the balanced chemical equation for the reaction

The balanced chemical equation for the reaction is

2HNO₃ + Ba(OH)₂ → Ba(NO₃)₂ + 2H₂O

This means, 2 mole of HNO₃ is required to neutralize 1 mole Ba(OH)₂  

From the given information,

[tex]V_{A} = 25.0\ mL[/tex]

[tex]C_{B} = 0.250 \ M[/tex]

[tex]V_{B} = 15.7 \ mL[/tex]

From the balanced chemical equation

[tex]n_{A} = 2[/tex]

[tex]n_{B} =1[/tex]

Also, Using the titration formula

[tex]\frac{C_{A}V_{A} }{C_{B}V_{B}} = \frac{n_{A}}{n_{B}}[/tex]

We get

[tex]\frac{C_{A} \times 25.0 }{0.250 \times 15.7} = \frac{2}{1}[/tex]

Then,

[tex]C_{A} = \frac{2\times 0.250 \times 15.7} {1 \times 25.0}[/tex]

[tex]C_{A} =\frac{7.85}{25.0}[/tex]

[tex]C_{A} =0.314 \ M[/tex]

Hence, the concentration of the original HNO₃ solution is 0.314 M

Learn more here: https://brainly.com/question/16870772

Answer:

The answer is D) Electrolytic cell

Explanation:

An electrolytic cell is a device used for the decomposition by the electrical current of ionized substances called electrolytes.

When the two electrodes are connected by a wire, electrical energy is produced, and a flow of electrons takes place from the electrode.

These cells are the closest thing to a galvanic battery.

Answer:

b. voltaic cell

Explanation:

Founders Education answer. had to take this quiz 4 times

Answer:

zero

Explanation:

In a unit cell, an atom that is located at the center of a cube edge is not involved in sharing unit cells because a central atom of a unit cell belongs to the entire cell and only to that unit cell of the lattice.

Hence, the center atom of a unit cell do not share any unit cell and the correct answer is "Zero".

Answer:

X₅Y₂Z₃

Explanation:

The formula of a compound is determined as the whole number ratio between moles of each element present in the molecule.

The molecule is made from X, Y and Z. To fin the ratio we will divide the given moles in the moles of Y (0.197 moles), because is the element with the low number of moles.

X = 0.492 moles / 0.197 moles = 2.5

Y = 0.197 moles / 0.197 moles = 1

Z = 0.295 moles / 0.197 moles = 1.5

But, as the formula is given just with whole numbers, if we multiply each number twice:

X = 2.5*2 = 5

Y = 1*2 = 2

Z = 1.5*2 = 3

The formula is:

Answer:

well, first off. the formula for carbon tetrachloride is CCl4

We need to find the molar mass of carbon tetrachloride

1(Mass of C) + 4(mass of chlorine)

1(12) + 4(35.5)

12 + 142

154 g/mol

Number of moles of CCl3 in 543.2g CCl3

n = given mass / molar mass

n = 543.2/153

n = 3.53 moles

always remember to brainly the questions you find helpful

Answer:

3.53 moles

Explanation:

Answer:

А It is hard because its ions are held together by strong electrostatic attractions.

B It is malleable because its atoms can easily move past one another without disrupting the bonding.  

Explanation:

These are correct explanations of the properties of magnesium.

C is wrong. Mg is a good conductor of electricity and it has metallic bonds.

D is wrong. Mg has no molecules. It has no intermolecular forces.

A 1.89 pints of blood would contain 873 grams of platelets.

To calculate the amount of platelets present in 1.89 pints, it is first necessary to transform this unit of volume into liters:

                                  [tex]1.89 \times 473.2 = 894.3 mL[/tex]

                                         [tex]\frac{894.3}{1000}= 0.84L[/tex]

Now, just calculate the amount of platelets present in 0.84L:

                                    [tex]\frac{1.04\times10^{3}g}{xg}=\frac{1L}{0.84L}[/tex]

                                       x = 873 grams

So, a 1.89 pints of blood would contain 873 grams of platelets.

Learn more about transformation of units in: brainly.com/question/10667910

Answer:

[tex]\Delta G=-359\frac{kJ}{mol}[/tex]

Explanation:

Hello,

In this case, we must remember that the Gibbs free energy is defined in terms of the enthalpy, temperature and entropy as shown below:

[tex]\Delta G=\Delta H -T\Delta S\\[/tex]

In such a way, for the given data, we obtain it, considering the conversion from J to kJ for the entropy in order to conserve the proper units:

[tex]\Delta G=-292\frac{kJ}{mol} -(298)(224\frac{J}{mol}*\frac{1kJ}{1000J} )\\\\\Delta G=-359\frac{kJ}{mol}[/tex]

Best regards.

Answer:

B- 358 kj

Explanation: I took the test

Answer:

B. 21.07 x 10²³ molecules

Explanation:

Avogadro's Number: 6.022 x 10²³

Step 1: Set up equation

[tex]3.5 mols CO_2(\frac{6.022(10^{23}) moleculesCO_2}{1 mol CO_2})[/tex]

Step 2: Multiply and cancel out units

3.5(6.022 x 10²³) = 21.07 x 10²³ molecules CO₂

Step 3: Convert to proper scientific notation

≈ 2.11 x 10²³ molecules CO₂

Answer:

HClO 7.54

Explanation:

Hypochlorous acid (HClO) is a weakest acid because the pKa value of Hypochlorous acid is very high among the options given in the activity. pKa is a method which is used in order to identify the strength of an acid. The higher the value of pKa of a liquid, lower the strength of an acid while lower the value of pKa of chemical, higher the strength of an acid. In the options, HClO2  is a strong acid due to high lower pKa value.

Answer:

96 mmHg

[tex]h=96mmHg[/tex]

Explanation:

From this question,manometer end is closedw, So we can deduced that the height of the column will not be affected by the atmospheric pressure .

The difference of height of the mercury level is given as,

h=9.60cm

h=9.60(10mm/1cm)

[tex]h=96mm[/tex]

But it is obvious that in this closed end manometer.the pressure of the gas is equal to the height

P(gas)=h

P(gas)=96mmHg

This pressure is as a result of the presence of gas.

Therefore, the pressure of the argon gas in the container is 96mmHg.

The pressure of the argon in the container was 96mmHg.

We were told that the manometer has closed ends which means that the

height will not be affected by atmospheric pressure.

The height which is the difference in mercury level is

h=9.60cm

We can convert it to millimeter by multiplying it by 10

h=9.60 × 10 = 96mm

The pressure of the closed end manometer will be equal to the height

P(gas)=h

P(gas)=96mmHg

The pressure of the argon gas in the container is 96mmHg.

Read more on https://brainly.com/question/17151458

The question is missing. Here is the complete question.

Which balanced redox reaction is ocurring in the voltaic cell represented by the notation of [tex]Al_{(s)}|Al^{3+}_{(aq)}||Pb^{2+}_{(aq)}|Pb_{(s)}[/tex]?

(a) [tex]Al_{(s)}+Pb^{2+}_{(aq)} ->Al^{3+}_{(aq)}+Pb_{(s)}[/tex]

(b) [tex]2Al^{3+}_{(aq)}+3Pb_{(s)} -> 2Al_{(s)}+3Pb^{2+}_{(aq)}[/tex]

(c)[tex]Al^{3+}_{(aq)}+Pb_{(s)} ->Al_{(s)}+Pb^{2+}_{(aq)}[/tex]

(d) [tex]2Al_{(s)}+3Pb^{2+}_{(aq)} -> 2Al^{3+}_{(aq)}+3Pb_{(s)}[/tex]

Answer: (d) [tex]2Al_{(s)}+3Pb^{2+}_{(aq)} -> 2Al^{3+}_{(aq)}+3Pb_{(s)}[/tex]

Explanation: Redox Reaction is an oxidation-reduction reaction that happens in the reagents. In this type of reaction, reagent changes its oxidation state: when it loses an electron, oxidation state increases, so it is oxidized; when receives an electron, oxidation state decreases, then it is reduced.

Redox reactions can be represented in shorthand form called cell notation, formed by: left side of the salt bridge (||), which is always the anode, i.e., its half-equation is as an oxidation and right side, which is always the cathode, i.e., its half-equation is always a reduction.

For the cell notation: [tex]Al_{(s)}|Al^{3+}_{(aq)}||Pb^{2+}_{(aq)}|Pb_{(s)}[/tex]

Aluminum's half-equation is oxidation:

[tex]Al_{(s)} -> Al^{3+}_{(aq)}+3e^{-}[/tex]

For Lead, half-equation is reduction:

[tex]Pb^{2+}_{(aq)}+2e^{-} -> Pb_{(s)}[/tex]

Multiply first half-equation for 2 and second half-equation by 3:

[tex]2Al_{(s)} -> 2Al^{3+}_{(aq)}+6e^{-}[/tex]

[tex]3Pb^{2+}_{(aq)}+6e^{-} -> 3Pb_{(s)}[/tex]

Adding them:

[tex]2Al_{(s)}+3Pb^{2+}_{(aq)} -> 2Al^{3+}_{(aq)}+3Pb_{(s)}[/tex]

The balanced redox reaction with cell notation [tex]Al_{(s)}|Al^{3+}_{(aq)}||Pb^{2+}_{(aq)}|Pb_{(s)}[/tex] is

[tex]2Al_{(s)}+3Pb^{2+}_{(aq)} -> 2Al^{3+}_{(aq)}+3Pb_{(s)}[/tex]

Answer: [tex]\Delta S[/tex] = 473.92J/K.mol

Explanation: In physics, Entropy is defined as a degree of disorder in a system. Entropy change is given by the sum of all the products multiplied by their respective coeficients minus the sum of all the reagents multiplied by their respective coeficients:

[tex]\Delta S = m\Sigma product - n\Sigma reagent[/tex]

The balanced reaction:

[tex]H_{2}S_{(g)}+2H_{2}O_{(l)}=>3H_{2}_{(g)}+SO_{2}_{(g)}[/tex]

gives the proportion reagents react to form products, so, if 1.6 moles of [tex]H_{2}S_{(g)}[/tex]:

3.2 moles of water is used;

4.8 moles of hydrogen gas is formed;

1.6 moles of sulfur dioxide is also formed;

Calculating entropy change:

[tex]\Delta S = (4.8*131+1.6*248.8)-(1.6*205.6+3.2*70)[/tex]

[tex]\Delta S=628.8+398.08-328.96-224[/tex]

[tex]\Delta S[/tex] = 473.92J/K.mol

Entropy change for the given chemical reaction is [tex]\Delta S[/tex] = 473.92J/K.mol

Explanation:

An atom undergoes alpha decay by losing a helium atom.

So when bismuth undergoes alpha decay, we have;

²¹⁰₈₃Bi --> ⁴₂He + X

Mass number;

210 = 4 + x

x = 206

Atomic number;

83 = 2 + x

x = 81

The element is Thallium. The symbol is Ti.

For the second part;

X --> ⁴₂He + ²³⁴₉₀Th

Mass number;

x = 4 + 234 = 238

Atomic Number;

x = 2 + 90 = 92

The balanced nuclear equation is;

²³⁸₉₂U --> ⁴₂He + ²³⁴₉₀Th

Answer:

d. condensation of water on a wind shield of a car

Explanation:

Condensation involves the conversion of moist air into liquid.

Gas has a higher energy compared to liquid. This is why Gas particles move at random motion and faster in relation to solid and liquid particles due to the high energy content.

The conversion of the gas to liquid means that there was loss or release of energy which validates the answer.

Answer: make a drainage system or make sure that the ground does not absorb the water from the rain and cause a landslide.

Explanation: To prevent frequent landlides you have to make suee there is and area for the rain to go so it does not get stuck in the mud and destabalize the mud

B. Plant vegetation on the slops that expreience landslides.

E. Reduce the sloped where landslides occur.

Hope this helped, please mark brainiest!

Answer:

D. Malleable, conducts electricity, high melting point, giant structure, metallic lattice

Explanation:

Copper is a metal with an atomic number of 29. This metal is soft and reddish in color which explains why it is very malleable(beaten to form various shapes without breaking).

All metals are good conductors of electricity including copper which is also a metal. Metals generally are insoluble in water. Copper also has a high melting point which is a characteristic of metals due to their giant structure and metallic lattice which makes it difficult to be broken down.

Answer:

0.14%

Explanation:

The computation of % is shown below:

As we know that

     HClO <=> H+ + ClO-

I         0.015          0      0

C          -a            +a     +a

E      0.015-a        a       a

Now

[tex]Ka = \frac{[H+][ClO-]}{[HClO]}[/tex]

[tex]= \frac{a^{2}}{(0.015 - a)} \\\\= 3.0 \times 10^{-8}[/tex]

[tex]a^{2} + 3.0 \times 10^{-8}a - 4.5 \times 10^{-10} = 0[/tex]

Now Solves the quadratic equation i.e.

[tex]a = 2.120 \times 10^{-5}[/tex]

[tex][H+] = a = 2.120 \times 10^{-5} M[/tex]

So,

% ionization is

[tex]= \frac{[H+]}{[HClO]}_{initial} \times 100\%\\\\= 2.120 \times 10^{-5}\div0.015 \times 100\%[/tex]

= 0.14%

Hence, the percentage of hypochlorous ionization is 0.14%

Answer:

1) 6.524779402×10^(-17)  

2)521.1g

3)113

Explanation:

Answer: 1) 6.524779402×10^(-17)

2)521.1g

Explanation: