Please help me with this!!!​

Energy can be transferred mechanically through the movement of the parts in machines, and when the motion or position of an object changes. Sound waves and seismic waves (formed during earthquakes) are mechanical waves that transfer energy through materials and from place to place.

Hope This Helps :)

Answer:

80 m

Explanation:

Given :

Initial Velocity, U = 28 m/s

θ = 45°

The maximum range occurs at angle, θ = 45°

The maximum range, R is given by ;

R = U²sin2θ / g

g = acceleration due to gravity = 9.8 m/s²

Plugging in the values :

R = [28² * sin2(45)] / 9.8

R = [28² * sin90] / 9.8

R = 784 / 9.8

R = 80 m

Answer:

-29.9907

Explanation:

c = Q / (mΔT)

You're looking for ΔT, so you would plug in what you already know and get C= -12540/(100 x ΔT)

then you would solve

Knowing that the momentum(p) of an object is directly (when one number goes up the other will too) related to both the mass and velocity of an object or p=mv, two rolling bowling balls of different masses can have the same momentum because the one with the lower mass, has a higher velocity. The higher velocity of an object would make up for the lower mass and vice versa.

Answer:

Sample Response: Momentum is equal to the mass of an object multiplied by the velocity of an object. The two bowling balls can have the same momentum if the bowling ball with less mass has a higher velocity, and vice versa. As long as the product of the mass and velocity of one bowling ball is equal to the product of the mass and velocity of the other, the bowling balls will have the same momentum.

Explanation:

Answer: Vehicle Balance

Explanation:

Vehicle balance simply means how the weight of a vehicle is distributed across its tires which connects to the road

It should be noted that there'll be a shift in the balance of a vehicle when the braking, acceleration, or turning bring about a scenario in which the weight of th vehicle moves from one area to another.

The molecules making up object collide with the molecules of the other and some of the kinetic energy from a warmer object is transferred to the cooler one.

Answer:

C) Potential energy due to intermolecular forces.

Answer:

Value of the resistors​ R = 2 ohm

Explanation:

Given:

Resistor R1 = 4 ohm

Resistor R2 = 4 ohm

Find:

Value of the resistors​ R

Computation:

We know that Resistor R1 and Resistor R2 connected in parallel series.

So,

Using common resistance in parallel series

⇒ 1/R = 1/R1 + 1/R2

⇒ 1/R = 1/4 + 1/4

⇒ 1/R = (1 + 1) / 4

⇒ 1/R = 2/4

⇒ R = 4/2

⇒ R = 2

Value of the resistors​ R = 2 ohm

Answer:

Explanation:

If the distance to the end of the road was 40 m, and she traveled back to where she started, she traveled a total distance of 80 m. It took her 100 seconds to travel the 80 m.

Based on the given distance-time graph, the number of seconds that Angela used to go to the end of the road and arrive back is 100 seconds.

The end of the road is 40m and coming back is also 40 m. The total distance is:

= 40 + 40

= 80m

The graph shows that to walk 80 meters, Angela took a 100 seconds because the line on the graph ends at 80 m and 100 seconds.

Find out more uses of distance-time graphs at https://brainly.com/question/13877898.

#SPJ6

Answer:

Explanation:

1)Melting:

Melting is the process by which a substance changes from the solid phase to the liquid phase. ... Melting occurs when the internal energy of a solid increases, usually through the application of heat or pressure, such that the molecules become less ordered.

2) liquefication:

In physics and chemistry, the phase transitions from solid and gas to liquid (melting and condensation, respectively) may be referred to as liquefaction. The melting point (sometimes called liquefaction point) is the temperature and pressure at which a solid becomes a liquid.

3) vaporization:

Vaporization, conversion of a substance from the liquid or solid phase into the gaseous (vapour) phase. If conditions allow the formation of vapour bubbles within a liquid, the vaporization process is called boiling. Direct conversion from solid to vapour is called sublimation.

4) Sublimation occurs as molecules of a substance in the solid state go to the vapor state directly, rather than through the liquid state. ... ⭕In terms of the kinetic molecular theory, we know that molecules are in constant random motion, even when the substance is below the melting point.

Answer:

The correct answer is - distress.

Explanation:

Eustress is a type of stress that is beneficial to person and caused by adrenaline. Hypostress is a stress that is caused due to boredom or no work. It is stress comes with wasting the time.

Distress is the bad stress caused by anxiety, sadness, grief, and such type of stress that is caused irritability. Irritability is caused not just by stress but many factors.

Answer:

Deflating the tires by pulling the valve stems

Explanation:

When an accident happens, the EMT process is to take off the top of the vehicle of the highly damaged vehicle so that it can easily be assessed to rescue the vehicle occupants. This creates a bigger exit for the rescuers to take out the people. Vehicle extrication means removing the vehicle from around someone involved in a fatal collision, when other other ways of exiting is not advised or possible. to stabilize the vehicle you have to deflate all tires by pulling the valve stems.

Answer:

The size of the force varies inversely as the square of the distance between the two charges. Therefore, if the distance between the two charges is doubled, the attraction or repulsion becomes weaker, decreasing to one-fourth of the original value.

Explanation:

Coulomb’s law, mathematical description of the electric force between charged objects. Formulated by the 18th-century French physicist Charles-Augustin de Coulomb, it is analogous to Isaac Newton’s law of gravity.

Both gravitational and electric forces decrease with the square of the distance between the objects, and both forces act along a line between them. In Coulomb’s law, however, the magnitude and sign of the electric force are determined by the electric charge, rather than the mass, of an object. Thus, charge determines how electromagnetism influences the motion of charged objects. Charge is a basic property of matter. Every constituent of matter has an electric charge with a value that can be positive, negative, or zero.

Coulomb's Law says that the force between 2 charges is proportional to the product of the quantities of charge on each and inversely proportional to the square of the distance between them. The formula for Coulomb's Law is [tex]F=k\frac{q_{1}q_{2} }{r^{2} }[/tex].

[tex]F[/tex] is the force.

[tex]k[/tex] is the Coulomb's constant ([tex]8.987*10^{9} \frac{Nm^{2} }{C^{2} }[/tex]).

[tex]q_{1}[/tex] is the electric charge of object 1.

[tex]q_{2}[/tex] is the electric charge of object 2.

[tex]r[/tex] is the distance between the two charges.

Electric force is inversely proportional to ([tex]r^{2}[/tex]) instead of ([tex]r[/tex]). As the distance between charges increases, the electric force decreases by a factor of [tex]\frac{1}{r^{2} }[/tex].

Answer:

p is =force x 10 whch is constant

Answer:

Energy is defined as the ability to do work.

Explanation:

Answer:

DU = 21 KJ

Explanation:

Given the following data;

Quantity of heat = 125 KJ

Work = 104 KJ

To find the change in internal energy;

Mathematically, the change in internal energy of a system is given by the formula;

DU = Q - W

Where;

DU is the change in internal energy.

Q is the quantity of energy.

W is the work done.

Substituting into the formula, we have;

DU = 125 - 104

DU = 21 KJ

Answer:

Explanation:

The PE equation for a mass/spring system is

[tex]PE=\frac{1}{2}k[/tex]Δx² and filling in:

[tex]130=\frac{1}{2}k(.10)^2[/tex] and

[tex]k=\frac{2(130)}{(.10)^2}[/tex] so

k = 26000 N/m

If the displacement from equilibrium changes more, the PE needed to compress it will also change.

[tex]PE=\frac{1}{2}(26000)(.20)^2[/tex] gives us that

PE = 520J

The Earth orbits around the sun because the gravitational force that the sun

exerts on the Earth:

O A. causes Earth's acceleration toward the sun.

O B. is very small because the sun is so far from the Earth.

O c. is smaller than the force the Earth exerts on the sun.

O D. pushes the Earth away from the sun.

O A. causes Earth's acceleration toward the sun.

I hope this helps, have a nice time ahead!

Answer:

HEY THERE!

Explanation:

The temperature tells us the average speeds of the gas particles, which are held in the cluster by gravity, so we can use these speeds to determine the cluster mass

HAVE A GOOD DAY!

Answer:

The answer is "planetesimals".

Explanation:

The uncountable little corpses of the accreted gas and dust were supposed to orbit the Sun while the planets were formed. The theory explaining the creation of the solar system as a whole is termed the quark-gluon plasma hypothesis.

An object produced by dust, rock, and other materials is called a planetesimal. This word is rooted throughout the microscopic idea, which shows that an object is too small to observe or quantify. Everywhere from many meters to hundreds of kilometers asteroids may acquire size.

Answer:

1. 45 m

2. 50 m/s

Explanation:

From the question given above, the following data were obtained:

Initial velocity (u) = 20 m/s

Time (t) = 3 s

1. Determination of the position (i.e height)

Time (t) = 3 s

Acceleration due to gravity (g) = 10 m/s²

Height (h) =?

h = ½gt²

h = ½ × 10 × 3²

h = 5 × 9

h = 45 m

2. Determination of the velocity.

Initial velocity (u) = 20 m/s

Time (t) = 3 s

Acceleration due to gravity (g) = 10 m/s²

Velocity (v) =?

v = u + gt

v = 20 + (10 × 3)

v = 20 + 30

v = 50 m/s

Answer:

The surface gravity g of the planet is 1/4 of the surface gravity on earth.

Explanation:

Surface gravity is given by the following formula:

[tex]g=G\frac{m}{r^{2}}[/tex]

So the gravity of both the earth and the planet is written in terms of their own radius, so we get:

[tex]g_{E}=G\frac{m}{r_{E}^{2}}[/tex]

[tex]g_{P}=G\frac{m}{r_{P}^{2}}[/tex]

The problem tells us the radius of the planet is twice that of the radius on earth, so:

[tex]r_{P}=2r_{E}[/tex]

If we substituted that into the gravity of the planet equation we would end up with the following formula:

[tex]g_{P}=G\frac{m}{(2r_{E})^{2}}[/tex]

Which yields:

[tex]g_{P}=G\frac{m}{4r_{E}^{2}}[/tex]

So we can now compare the two gravities:

[tex]\frac{g_{P}}{g_{E}}=\frac{G\frac{m}{4r_{E}^{2}}}{G\frac{m}{r_{E}^{2}}}[/tex]

When simplifying the ratio we end up with:

[tex]\frac{g_{P}}{g_{E}}=\frac{1}{4}[/tex]

So the gravity acceleration on the surface of the planet is 1/4 of that on the surface of Earth.

Answer:

A. New problem or discovery Engineering solution Development Research Explanation:

A possible  sequence of steps in the research and development cycle are  A. New problem or discovery Engineering solution Development Research​. In the  research and development cycle, the first step is the problem that a scientist observe. After that we have discover a solution for that problem through many research so the above materials are the possible sequence of steps in the research and development cycle.

Answer:

(a) t = 0.75 s

(b) d = 26 m

Explanation:

Height, h = 12 m

Angle, A = 30 degree

initial velocity, u = 40 m/s

(a) Let the time is t.

Use second equation of motion

 [tex]h = u t + 0.5 at^2\\\\12 = 40 sin 30 t - 0.5 \times10 \times t^2\\\\12 = 20 t - 5 t^2\\\\5 t^2 - 20 t + 12 =0 \\\\t = \frac{20\pm \sqrt{400-240}}{10}\\\\t = \frac{20\pm 12.65}{10}\\\\t = 3.3 s, 0.75 s[/tex]

(b) d = u cos A t

d = 40 x cos 30 x 0.75 = 26 m

Answer:

All the sides and inner angles of a regular form must be equal. The sides and angles of an irregular form aren't the same. An equilateral triangle, for example, is a regular form because all of its sides and angles are the same length.

OAmalOHopeO

There are two forces acting on a rocket at the moment of lift off: Thrust pushes the rocket upwards by pushing gases downwards in the opposite direction.Weight is the force due to gravity pulling the rocket downwards towards the centre of the earth.So I'm thinking the answer is THRUST.

Answer:

Please find the complete question in the attached file.

Explanation:

The time is taken by ball A to reach the bottom [tex]\to t=\sqrt{\frac{2s}{a}}=\sqrt{\frac{2 \times 10}{5}}=\sqrt{\frac{2 0}{5}}= \sqrt{4}=2\ s[/tex]

Calculating the velocity of the ball:

[tex]-h=ut-\frac{1}{2}gt^2\\\\-S \sin 30=ut-\frac{1}{2}gt^2\\\\-5=u(2)-\frac{1}{2}\times 9.81 \times 2^2\\\\[/tex]

[tex]-5=2u-9.81 \times 2\\\\-5=2u-19.62\\\\-5+19.62=2u\\\\14.62=2u\\\\u=\frac{14.62}{2}\\\\u=7.31 \ \frac{m}{s}[/tex]

Answer:

The action of measuring the size, length, or amount of something, as established is called measurement.

Explanation:

“Measurement” is the act of determining a target's size, length, weight, capacity, or other aspect. ... To use measurement tools as necessary. It is also appropriate to say that measurement is done by a worker using a measurement system, and instrumentation is done by a technician.