PLEASE HELP MAX POINTS AND BRAINLIEST!
Look at the graph below.

A graph is shown with Absolute magnitude shown on the y-axis and Surface temperature in degree Celsius shown on the x-axis. The Dwarf stars are shown along a slanting line from coordinates 30,000 and minus 3 to 10,000 and minus 4. The Main Sequence stars are shown along a slanting line from coordinates 20,000 and minus 2 to 2,000 and minus 6. The giants are shown along a line parallel to the x-axis from coordinates 5,000 and 2 to 2,000 and 3. The supergiants are shown along a line parallel to the x-axis from coordinates 7,500 and 4 to 2,500 and 4. Point A has coordinates 20,000 and minus 4. Point B has coordinates 2,500 and minus 4. Point C has coordinates 5,000 and 2. Point D has coordinates 7,000 and 4.

Which of the following stars is most likely to be red?
a. Star A
b. Star B
c. Star C
d. Star D

Answer:

ghittu iihg उह्स उउह्स उग्य्किव जिक्ह्ब

Answer:

C.

Explanation:

Force = Mass * Acceleration

So 20 = 5* Acceleration

4 = Acceleration

The acceleration of the object is 4 m/s².

To find the acceleration, the given values are:

Force = 20 N

Mass = 5 kg

Definition:

     As it was given as the values of  Force and mass, here acceleration definition depends on the Newton's second law of motion.

Using the second law of motion, the force will be equal to the product of the mass and the acceleration.

As formula,

                               F = ma Newton

Here, to find acceleration,

                              a =f/ m

Substituting the values,

                              = 20 / 5

                            a = 4m/s².

So, the acceleration was 4 m/s². The Option C is the correct answer.

Learn more about acceleration,

https://brainly.com/question/12550364

#SPJ6

Answer:

F = q v B    where B is the component  of the field perpendicular to v.

F = 1.6E-19 * 4E5 * 7E-5 = 4.48* 10^-18  N = 44.8 * E-19 N

$ \large\boxed{ \sf \red{More ~Info :}}$

The units of supplementary quantities are dimensionless units.

[tex] \\ [/tex]

the scientific study of natural forces such as light, sound, heat, electricity, pressure, etc.

Answer:

The heat capacity of a body is defined as the heat required to raise it's temperature by me degree or one kelvin.while specific heat capacity of a substance is defined as the heat required to the temperature of a unit mass of it through one degree or one kelvin.

I hope it helps

Answers:

The values are approximate.

==========================================================

Explanation:

When near the surface of the earth, the acceleration of gravity is roughly 9.81 m/s^2. This means that after each second passes, the velocity increases by roughly 9.81 m/s.

After 2.5 seconds, the velocity increases by 2.5*9.81 = 24.525 m/s = 24.5 m/s

If it was already going 25.0 m/s, then it bumps up to 25.0+24.5 = 49.5 m/s which is also approximate.

The acceleration of gravity stays the same when the object is close to the surface of the earth, so it stays at roughly 9.81 m/s^2

Side note: I'm ignoring air resistance (aka air friction or drag) since that greatly complicates things, and we would need to know the shape and surface area of the object. The material type would also be relevant info as well.

Answer:

um .... D. D D D D D this should be it

Answer:

Q = Q

mcT = ml

100 x 4.2 x 25 = (50-18) l

l = 328

*Hope it helps*

The specific latent heat of fusion of the melted ice is 328.13 J/kg.

The specific latent heat of fusion of the melted ice is determined by applying the principle of conservation of energy as shown below;

Heat lost by the water = Heat gained by the ice

McΔθ = mL

where;

(100)(4.2)(25) = (32)L

32L = 10500

L = 328.13 J/kg

Thus, the specific latent heat of fusion of the melted ice is 328.13 J/kg.

Learn more about heat capacity here: https://brainly.com/question/16559442

Answer:

-0.383 m

Explanation:

Diameter of cylinder = 4m  therefore  r = 2

height of cylinder ( H ) = 4 m

specific gravity = 0.6 ( assumed )

depth of immersion = 'h'

Determine the metacentric height

weight of cylinder in water = water displaced

= 0.6 * 1000 * πr^2* H = 1000 * πr^2* h

= 0.6 * 4 = h

∴ h = 2.4 m

hence the depth of center of buoyancy from free space = h /2 = 1.2 m

The metacentric height can be calculated using the formula below

Gm = Io / Vsubmerged  - BG

attached below is the remaining solution

Answer:

Gpe = 15680 Joules

Explanation:

Gravitational potential energy (GPE) is an energy possessed by an object or body due to its position above the earth.

Mathematically, gravitational potential energy is given by the formula;

G.P.E = mgh

Where;

G.P.E represents potential energy measured in Joules.

m represents the mass of an object.

g represents acceleration due to gravity measured in meters per seconds square.

h represents the height measured in meters.

Given the following data;

Mass = 20 kg

Height = 80 m

We know that acceleration due to gravity is equal to 9.8 m/s²

To find the gravitational potential energy;

Gpe = mgh

Gpe = 20 * 80 * 9.8

Gpe = 15680 Joules

Answer:

Approximately 4.6 billion years ago, the solar system was a cloud of dust and gas known as a solar nebula. Gravity collapsed the material in on itself as it began to spin, forming the sun in the center of the nebula. ... Small particles drew together, bound by the force of gravity, into larger particles.

Answer:

Primero, definimos el desplazamiento como la distancia entre la posición final y la posición inicial.

Así, si comenzamos abajo, luego subimos la escalera, y luego bajamos, la posición final y la posición inicial serán la misma

por lo que el desplazamiento es igual a cero.

La medida recorrida es el espacio total recorrido.

Es decir, si entre el principio y el final de la escalera hay una distancia D.

La persona que sube y baja, recorre esta distancia dos veces.

Entonces cuando una persona sube y baja la escalera, la medida de su trayectoria será 2*D.

Answer: Your question is missing below is the question

Question : What is the no-friction needed speed (in m/s ) for these turns?

answer:

20.1 m/s

Explanation:

2.5 mile track

number of turns = 4

length of each turn = 0.25 mile

banked at 9 12'

Determine the no-friction needed speed

First step : calculate the value of R

2πR / 4 =  πR / 2

note : πR / 2 = 0.25 mile

∴ R = ( 0.25 * 2 ) / π

      = 0.159 mile ≈ 256 m

Finally no-friction needed speed

tan θ = v^2 / gR

∴ v^2 = gR * tan θ

 v = √9.81 * 256 * tan(9.2°)  = 20.1 m/s

Answer:

FeCl2 has a high melting point.

Explanation:

Answer:

Explanation:

The direction of the vector implies only its angle, not its magnitude. The direction of the vector is found in

[tex]tan^{-1}(\frac{y}{x})[/tex] so

[tex]tan^{-1}(\frac{11.1}{-43.0})=-14.5[/tex] but since we are in QII (where x is negative and y is positive) we have to add 180 to this number to get a direction of 165.5 degrees

Answer:

M_b = 2M_a

Explanation:

From gravity equation, we know that;

g = GM/R²

Where;

g is acceleration due to gravity

G is the gravitational constant

M is mass

Thus, making mass(M) the subject, we have;

M = gR²/G

Since we want to find the mass of B so that value of g on B is half that of its value on A.

Thus;

> g_b = ½g_a

> g_b/g_a = ½

Also, we are told that;

> R_a = ½R_b

> R_b/R_a = 2

If M_a = g_a•R_a²/G

And M_b = g_b•R_b²/G

Thus;

M_b/M_a = (g_b•R_b²/G)/(g_a•R_a²/G)

G will cancel out to give;

M_b/M_a = (g_b•R_b²)/(g_a•R_a²)

Rearranging for ease of simplification, we have;

M_b/M_a = (g_b/g_a) × (R_b/R_a)²

Plugging in the relevant ratios gives;

M_b/M_a = ½ × 2²

M_b/M_a = 2

M_b = 2M_a

Answer:

1028 slits/mm

Explanation:

We are given that

Wavelength of light, [tex]\lambda=530nm=530\times 10^{-9} m[/tex]

1nm=[tex]10^{-9} m[/tex]

[tex]\theta=33^{\circ}[/tex]

n=1

We have to find the number of slits per mm are marked on the grating.

We know that

[tex]dsin\theta=n\lambda[/tex]

Using the formula

[tex]dsin33^{\circ}=1\times 530\times 10^{-9}[/tex]

[tex]d=\frac{530\times 10^{-9}}{sin33^{\circ}}[/tex]

[tex]d=9.731\times 10^{-7} m[/tex]

1m=[tex]10^{3}mm[/tex]

[tex]d=9.731\times 10^{-7}\times 10^3[/tex]mm

[tex]d=0.0009731mm[/tex]

Number of slits=[tex]\frac{1}{d}[/tex]

Number of slits=[tex]\frac{1}{0.0009731}[/tex]/mm

Number of slits=1028/mm

Hence, 1028 slits/mm are marked on the grating.

Answer:

1027.6 lines per mm.

Explanation:

wavelength = 530 nm

order, m= 1

Angle = 33 degree

Let the slits per mm is 1/d.

So,

[tex]m \lambda = d sin A\\\\1\times 530\times 10^{-6} = d sin 33\\\\\frac{1}{d} = 1027.6 lines per mm[/tex]

Answer:

B.

Explanation:

Makes more sense to me

Answer:

The image is formed at 0.44 m in front of the mirror

magnification (M) = 0.44

Explanation:

Applying, mirror formular

1/f = (1/u)+(1/v).................... Equation 1

Where f = Focal length of the convex mirror, u = object distance, v = image distance.

Using the real is positive convection,

From the question,

Given: f = -1.6/2 = -0.8 m( The focal length of a convex mirror is vitual), u = 1.0 m

Substitute these values into equation 1

-1/0.8 = (1/v)+(1/1)

Solve for v

1/v = 1.25+1

1/v = 2.25

v = 1/2.25

v = 0.44 m

Hence the image is formed at 0.44 m in front of the mirror

Magnification (M) = v/u

m = 0.44/1

m = 0.44

Answer:

DISTANCE=800M

TIME=40s

Speed=20m/s

Explanation:

Have a nice day

Answer:

the distance is 800m

Explanation:

but i think its velocity

formula = D÷T

now 800m÷40

velocity=20m/s

Group of answer choices.

A. James likes ch.atting with his coworkers but is easily distracted.

B. James does some of his coworkers' work because he wants to be popular.

C. James accepts additional tasks at work as a way to show he can handle greater responsibility.

D. James turns down additional tasks at work because he doesn't want more responsibility.

Answer:

C. James accepts additional tasks at work as a way to show he can handle greater responsibility.

Explanation:

An employee can be defined as an individual who is employed by an employer of labor to perform specific tasks, duties or functions in an organization.

Basically, an employee is saddled with the responsibility of providing specific services to the organization or company where he is currently employed while being paid a certain amount of money hourly, daily, weekly, or monthly depending on the contractual agreement between the two parties (employer and employee).

A productive employee is a kind of person that is highly effective and efficient in the performance of his or her duties, especially through the use of their skills, knowledge, competence and expertise (experience). Also, a positive attitude or attribute are ethical and morally right characteristics  (qualities) that a person exhibits.

Typically, there exist a strong relationship between a positive attitude and the level of productivity of an employee.

Hence, an example of the correlation of productivity and a positive attitude would be James accepting additional tasks at work as a way to show he can handle greater responsibility. Thus, he is more focused on challenging himself to handle greater responsibility by accepting additional tasks at his work place.

Answer:

DU = 375 Joules

Explanation:

Given the following data;

Quantity of heat = 500 Joules

Work done = 125 Joules

To find the change in internal energy;

Mathematically, the change in internal energy of a system is given by the formula;

DU = Q - W

Where;

Substituting into the formula, we have;

DU = 500 - 125

DU = 375 Joules

Answer:

[tex]v=10^5\ m/s[/tex]

Explanation:

Given that,

Magnetic force acting on an electron, [tex]F=12.8\times 10^{-19}\ N[/tex]

The magnitude of the magnetic field,[tex]B=8\times 10^{-5}\ T[/tex]

We need to find the magnitude of the velocity. We know that the magnetic force is given by :

[tex]F=qvB[/tex]

Where

v is the velocity

So,

[tex]v=\dfrac{F}{qB}\\\\v=\dfrac{12.8\times 10^{-19}}{1.6\times 10^{-19}\times 8\times 10^{-5}}\\\\v=10^5\ m/s[/tex]

So, the magnitude of velocity is[tex]10^5\ m/s[/tex].

Answer:

LOL! couldnt be me either bestieeeee

Answer:

-_-

Explanation:

i dont know What was XD??

[tex]\boxed{ \sf{Answer}} [/tex]

____________________

(a) A = 5 kgwt

B = 10 N

First convert 5 kgwt to N,

[tex]5 \times 9.8 \\ = 49 \: N[/tex]

Net force [the forces are acting in 2 opposite directions]

[tex]A - B \: \\ = 49 - 10 \\ = 39 \: N[/tex]

____________________

(b) Since, the force is greater by A ↦the block will move towards B, i.e, to the right.

____________________

(c) Frictional force will try to oppose the motion of the block but since A has greater force than B, the frictional force will be resisted.

____________________

ʰᵒᵖᵉ ⁱᵗ ʰᵉˡᵖˢ ツ

꧁❣ ʀᴀɪɴʙᴏᴡˢᵃˡᵗ2²2² ࿐

Answer:

Heat capacity, Q = 38500 Joules

Explanation:

Given the following data;

Mass = 2 kg

Initial temperature, T1 = 30°C

Final temperature, T2 = 80°C

Specific heat capacity of copper = 385 J/Kg°C

To find the quantity of heat required;

Mathematically, heat capacity is given by the formula;

[tex] Q = mcdt [/tex]

Where;

Q represents the heat capacity or quantity of heat.

M represents the mass of an object.

C represents the specific heat capacity of water.

dt represents the change in temperature.

dt = T2 - T1

dt = 80 - 30

dt = 50°C

Substituting the values into the formula, we have;

[tex] Q = 2 * 385*50[/tex]

Heat capacity, Q = 38500 Joules