PLEASE HELP ASAP!!!!!

Sodium ion, Na+ and chloride ion, Cl- are the spectator ions of the reaction of perchloric acid with sodium hydroxide. Therefore, options a and d are correct.

What are spectator ions?

Spectator ions are ions that do not undergo a chemical reaction in a chemical equation, and they are in solution in their original form. The balanced chemical equation for the reaction of perchloric acid with sodium hydroxide is:

HClO4(aq) + NaOH(aq) → NaClO4(aq) + H2O(l)

In the reaction above, sodium hydroxide reacts with perchloric acid to form sodium perchlorate and water. During the reaction, H+ and OH- ions combine to form water (H2O) and cancel each other out. This makes them spectator ions. Also, sodium and chloride ions are already present in their original form before and after the reaction. They remain the same, which makes them spectator ions. CO2 and O2 are not spectator ions in this reaction; hence, they are incorrect as possible options in this question.

Learn more about spectator ions on:

https://brainly.com/question/29208113

#SPJ11

The correct sequence of steps in the formation of an action potential is as follows: 4. a graded depolarization brings an excited membrane to threshold potential, 6. voltage-gated Na+ channel activation occurs, 7. Na+ enter the cell and depolarization occurs, 1. voltage-gated Na+ channels are inactivated, 2. voltage-gated K+ channels open and K+ move out of the cell, 3. voltage-gated Na+ channels regain their normal properties, and 5. a temporary hyperpolarization occurs.
Explanation: Action potential is generated when a neuron sends information down an axon, away from the cell body. The steps involved in the formation of an action potential are:Graded depolarization occurs, which brings an excited membrane to threshold potential.Na+ enters the cell and depolarization occurs.Voltage-gated Na+ channel activation occurs.Voltage-gated Na+ channels are inactivated.Voltage-gated K+ channels open and K+ move out of the cell.A temporary hyperpolarization occurs.Voltage-gated Na+ channels regain their normal properties, which complete the cycle.Action potential is a result of ions moving in and out of the cell membrane, which changes the voltage difference between the inside and outside of the cell membrane. Action potential, therefore, involves the sequential opening and closing of different types of voltage-gated ion channels, including sodium (Na+) and potassium (K+) channels.

For more such questions on hyperpolarization

https://brainly.com/question/15997473

#SPJ11

The likely magnitude of the equilibrium constant K for the combustion reaction 2H₂(g) + O₂(g) = 2H₂O(g) is 10^3.

The equilibrium constant K is a measure of the extent of a chemical reaction at equilibrium, and it is given by the ratio of the products to the reactants, with each species raised to a power equal to its stoichiometric coefficient. For the combustion reaction of hydrogen and oxygen, the equilibrium constant K can be calculated as,

K = ([H₂O]^2) / ([H₂]^2[O₂])

Since the combustion reaction of hydrogen and oxygen is highly exothermic, the products (water molecules) are favored at equilibrium. This means that the concentration of water molecules will be much higher than the concentrations of hydrogen and oxygen molecules, leading to a large value of K. In this case, the likely magnitude of the equilibrium constant K is 10^3, indicating that the combustion reaction is highly favored at equilibrium.

To know more about hydrogen, here

brainly.com/question/14852040

#SPJ4

To estimate the system pressure and vapor-phase mole fraction when x1 = 0.8, we can use the 1-parameter Margules equation.

This equation assumes that the vapor-liquid equilibrium is a linear relationship between the mole fraction of each component.

Since the given experiment gives us three points, we can use linear interpolation to estimate the parameters of the Margules equation.

From the given experiment, we know the values for x1, y1, and P when x1 = 0.0, 0.2, and 1.0 respectively. Therefore, we can calculate the slope and y-intercept of the Margules equation as follows:

Slope = (P2 - P1)/(y2 - y1) = (68.23 - 41.02)/(0.51 - 0.0) = 68.23

y-intercept = P1 - (slope * y1) = 41.02 - (68.23 * 0.0) = 41.02

Using these values and the x1 value of 0.8, we can then estimate the system pressure and vapor-phase mole fraction as follows:

System Pressure = (slope * 0.8) + y-intercept = (68.23 * 0.8) + 41.02 = 78.2 kPa

Vapor-phase Mole Fraction = (System Pressure - y-intercept) / slope = (78.2 - 41.02) / 68.23 = 0.80

Therefore, the estimated system pressure and vapor-phase mole fraction when x1 = 0.8 is 78.2 kPa and 0.80 respectively.

For more information about Margules equation refer here

https://brainly.com/question/14103505?

#SPJ11

The systems that would be best modeled by an ideal solution are (i) ethane n-decane, (iii) benzene toluene. If any of the solutions are non-ideal, the Scatchard-Hildebrand approach would be appropriate to model the non-idealities. A solution is said to be ideal if the solution behaves like an ideal gas, which means that there are no intermolecular interactions between the molecules of the components. i.e., the solution will obey Raoult's law.

The systems that would be best modeled by an ideal solution are(i) ethane n-decane(ii) water 1-butanol(iii) benzene toluene. An ideal solution occurs when the components of a mixture form a homogeneous mixture that does not exhibit deviations from Raoult's law. Since the ideal mixture is composed of solvent and solute, it is impossible to completely exclude interactions between the two components.  

It is best suited for non-polar and small polar solutes. In this way, the non-ideality of the solution can be predicted. Therefore, if any of the solutions are non-ideal, the Scatchard-Hildebrand approach would be appropriate to model the non-idealities.

For more information about Raoult's law refer here

https://brainly.com/question/28304759

#SPJ11

The answer of the following following questions are PbO(s) + PbS(s) → 2Pb(l) + SO2(g) and  2PbS(s) + 3O2(g) → 2Pb(l) + 2SO2(g)

What is chemical reaction ?

A chemical reaction is a process in which one or more substances (reactants) are transformed into new substances (products) by the breaking and formation of chemical bonds. During a chemical reaction, the arrangement of atoms in the reactants is changed to form different molecules or compounds.

In a chemical reaction, the reactants are transformed into products through the rearrangement of atoms, but the total number of atoms remains the same. This is known as the law of conservation of mass, which states that matter cannot be created or destroyed in a chemical reaction.

(a)

Step 1: Roasting of galena in oxygen gas:

PbS(s) + 3O2(g) → PbO(s) + 2SO2(g)

Step 2: Heating the metal oxide with more galena:

PbO(s) + PbS(s) → 2Pb(l) + SO2(g)

(b) Overall balanced equation for the process:

2PbS(s) + 3O2(g) → 2Pb(l) + 2SO2(g)

Note: The state of the reactants and products has been indicated in the equations, with (s) representing a solid, (g) representing a gas, and (l) representing a liquid.

To know more about reaction visit :-

https://brainly.com/question/11231920

#SPJ1

According to the kinetic molecular theory, the particles of an ideal gas are separated by great distances, compared to there size. Hence option D is correct.

A large number of submicroscopic particles, including atoms and molecules, are used in the kinetic theory of gases, a theoretical model for characterizing the molecular composition of gases. The idea also states that atmospheric pressure is the result of particles colliding with each other and the walls of containers.

According to the kinetic hypothesis, gases are composed of many submicroscopic particles (atoms or molecules), all of which are in continuous random motion. The walls of the container and the fast moving particles that collide are constant and are separated by great distances, compared to there size.

To know more kinetic theory of gases, visit,

https://brainly.com/question/11067389

#SPJ4

If 1.04 g of chlorine gas occupies a volume of 872 ml at constant temperature and pressure, 2.08 g of chlorine gas would occupy 436 ml.

The given data for the question is:

Since the temperature and pressure are constant, we can use the formula,

Therefore, Initial Volume/Final Volume = Initial mass/Final mass

Where,

Initial Mass of Chlorine = Final Mass of ChlorineInitial Volume/V2 = 1.04/2.08

Final Volume = 872/2 = 436 ml

Thus, the final volume of the chlorine gas is 436 ml when the initial mass is 1.04g and the final mass is 2.08g at constant temperature and pressure.

Learn more about temperature: https://brainly.com/question/25677592

#SPJ11

Poisoning proton pumps impact anion uptake in such a way that  It would decrease the uptake of anions by passive diffusion.

The process by which molecules diffuse from a region of higher concentration to a region of lower concentration is known as passive diffusion. It is the most important mechanism for drug passage across membrane.

Diffusion is the net movement of material from a high concentration area to a low concentration area. The concentration gradient is the difference in concentration between the two areas, and diffusion will continue until this gradient is eliminated. Because diffusion transports materials from a high concentration area to a low concentration area

to know more about passive diffusion , visit ;

brainly.com/question/1304999

#SPJ1

The final temperature of the water would be approximately 91°C after 250,000 joules of heat are added.

Heat capacity is the amount of heat energy required to increase the temperature of a substance by one degree Celsius (or one Kelvin). It is a measure of how much energy a substance can absorb without a significant change in its temperature.

The heat capacity of a substance depends on its mass and composition. Substances with more mass or more complex molecular structures generally have higher heat capacities, meaning they require more energy to increase their temperature than substances with less mass or simpler molecular structures.

To solve this problem, we can use the specific heat capacity formula:

Q = m * c * ΔT

where Q is the amount of heat transferred, m is the mass of the substance, c is the specific heat capacity of the substance, and ΔT is the change in temperature.

We can rearrange this formula to solve for ΔT:

ΔT = Q / (m * c)

We are given the mass of the water (m = 785 g), the amount of heat added (Q = 250,000 J), and the specific heat capacity of water (c = 4.184 J/g°C).

Substituting these values into the equation, we get:

ΔT = 250,000 J / (785 g * 4.184 J/g°C)

ΔT ≈ 75.4°C

Therefore, the final temperature of the water would be:

15.0°C + 75.4°C = 91 °C

So the final temperature of the water would be approximately 91 °C after 250,000 joules of heat are added.

To know more about capacity visit:

https://brainly.com/question/28921175

#SPJ1

Menthol, like methanol, occurs naturally and has several isomers. One structural characteristic of menthol that is responsible for it having enantiomers is that it has a chiral center.

Chiral centers are atoms with four different substituents attached to them, and they are a type of stereocenter. Menthol has a chiral center, which means it has two possible enantiomers.

Enantiomers are molecules that are mirror images of each other and cannot be superimposed on one another.

The two enantiomers of menthol are (1R,2S,5R)-(−)-menthol and (1S,2R,5S)-(+)-menthol. They have identical physical and chemical properties, except for their interaction with polarized light. This is due to the fact that they rotate plane-polarized light in opposite directions.

To learn more about "menthol", visit: brainly.com/question/21296029

#SPJ11

The answer to this question is D) specific heat. When determining the energy change associated with a change in temperature, specific heat is a factor that is unique to each substance.

Specific heat- Specific heat is the amount of heat that must be added or removed from a unit of mass of a substance to increase or decrease its temperature by one degree Celsius or Kelvin. The amount of heat required to alter the temperature of a material varies depending on the nature of the substance. As a result, specific heat is a factor that is unique to each substance.

D) specific heat is correct because it is the unique factor for each substance when calculating the energy change associated with a change in temperature.

In conclusion, it is important to consider that when determining the energy change associated with a change in temperature, specific heat is a factor that is unique to each substance.

To learn more about "energy change", visit: brainly.com/question/30083274

#SPJ11

The order of oxyacids in decreasing acid strength is:

This order of  oxyacids is based on the number of oxygen atoms bonded to the central atom (in this case, Cl or Br) and the strength of the bond between the central atom and the oxygen atoms. The more oxygen atoms that are bonded to the central atom, the stronger the acid. Additionally, the strength of the bond between the central atom and the oxygen atoms increases as the electronegativity difference between the two atoms increases, making the acid stronger. HClO3 has the most oxygen atoms and the strongest bond, making it the strongest acid, while HBrO has the fewest oxygen atoms and the weakest bond, making it the weakest acid.

Find more exercises on  oxyacids;

https://brainly.com/question/14179541

#SPJ1

Absolute dating and relative dating are two methods used by scientists to determine the age of rocks, fossils, and other geological materials.

Relative dating involves comparing the placement of fossils in rock layers. By analysing the sequence of rock layers, scientists can determine the relative ages of fossils and other materials. For example, if a fossil is found in a layer of rock that is below another layer, it is considered to be older than the layer above it.

Absolute dating involves using scientific methods to determine the exact age of a material. This is often done using radiometric dating techniques, which involve measuring the amount of certain isotopes in a sample.

Carbon-14 dating is based on the fact that carbon-14, an isotope of carbon, is created when cosmic rays interact with nitrogen in the atmosphere. Plants and animals take in carbon-14 through photosynthesis and eating, and the carbon-14 decays over time at a known rate. By measuring the amount of carbon-14 in a sample, scientists can determine the age of the material.

Radiometric dating is a technique used to date rocks and other geological materials based on the decay rate of radioactive isotopes. For example, uranium-lead dating can be used to date rocks that are billions of years old, by measuring the amount of uranium and lead in the sample and calculating how long it has been decaying.

To find out more about dating techniques, visit:

https://brainly.com/question/12291163

#SPJ1

Answer:

oxygen friend

Explanation:

It is generally believed that the Earth's atmosphere did not contain oxygen until around 2500 million years ago (Mya) when oxygen-evolving photosynthetic bacteria arose. At around 800–500 Mya, the oxygen concentration increased sharply to reach the 21% we have today. So, it seems highly likely that life arose as anaerobic organisms, which then evolved to tolerate oxygen and finally, to use it as a terminal acceptor for the energy-producing oxidative processes in the respiration of aerobic bacteria and mitochondria in eukaryotic cells. The respiratory processes employed by typical aerobic organisms today have a wide range of mechanisms to deal with the troublesome side effects of living with a high oxygen concentration.

According to the given Information:

The aqueous solution that has the lowest freezing point is 1.0 M C2H5OH (ethanol).

Because it determines the concentration of solute particles in the solution.

Ionic solutes, such as NaCl, dissociate into multiple ions in water, producing a higher concentration of solute particles per unit concentration than molecular solutes, such as ethanol.

This results in a greater degree of freezing point depression for ionic solutes than molecular solutes.

An aqueous solution is one in which water serves as the solvent.

Aqueous solutions are very common in nature and in laboratory settings. Many substances can dissolve in water to form aqueous solutions, including salts, acids, bases, and gases.

Aqueous solutions are important in many fields of science, including chemistry, biology, and environmental science.

To know more about aqueous solution, visit:

https://brainly.com/question/13608038

#SPJ1

The Lewis acid is the one that accepts electrons from the donor atom. Option 'b' [tex]BCl_3[/tex] is the Lewis acid of the following options.  

Learn more about Lewis acid: https://brainly.com/question/28299444

#SPJ11

Fermentation in certain types of yeast occurs in the absence of oxygen.

Fermentation is an anaerobic metabolic process that occurs in the absence of oxygen, which converts sugar into cellular energy, primarily adenosine triphosphate (ATP), and produces carbon dioxide and alcohol as waste products. Fermentation is used in a variety of industrial and food production processes. Yeast, a type of fungus, is used to ferment carbohydrates and produce carbon dioxide and alcohol in bread baking, winemaking, and beer brewing. Lactobacilli bacteria are used in the production of yogurt and cheese by fermenting milk lactose.

There are two types of fermentation processes: alcoholic fermentation and lactic acid fermentation.

for such more question on Fermentation

https://brainly.com/question/11554005

#SPJ11

A magnetic force is what moves the compass needle when it is in close proximity to a particular kind of metal. This is so because the magnetic fields of the metal item and the compass needle interact to create a force.

Permanent magnets, electric currents, and various types of metals may all be surrounded by magnetic fields, which are created by moving charges like electrons. The compass needle will move or align itself with the magnetic field lines when a magnetic field is applied to a magnetic substance, such as that material.If the compass is placed next to a metal item, the metal must likewise have a magnetic field or be able to create one when exposed to one. The compass needle moves as a result of the force created by the interaction of the magnetic fields, revealing the existence and direction of the magnetic field generated by the metal item.

learn more about compass needle here:

https://brainly.com/question/2577109

#SPJ4

The reaction in which two compounds exchange their ions to form two new compounds is called decomposition reaction. Option (a) is correct.

Decomposition reaction is defined as a reaction in which a compound breaks down into two or more simpler substances. The general form of the decomposition reaction can be written as,

            AB → A+B.

This type of reaction require an input of energy in the form of heat, light, or electricity. It occurs when one reactant breaks down into two or more products. Some examples of decomposition reactions involves the breakdown of hydrogen peroxide to water and oxygen and the breakdown of water to hydrogen and oxygen. This is called the the process or effect of simplifying a single chemical entity into two or more fragments. This reaction is usually regarded and defined as the exact opposite of chemical synthesis .

To learn more about Decomposition reaction

https://brainly.com/question/16728382

#SPJ4

Answer: 3.85%

Explanation: To calculate the volume percentage of ethanol in the mixture, we need to determine the total volume of the mixture first.

Total volume = volume of ethanol + volume of water

Total volume = 10 ml + 250 ml

Total volume = 260 ml

Now, we can calculate the volume percentage of ethanol in the mixture using the following formula:

Volume percentage of ethanol = (volume of ethanol ÷ total volume) x 100%

Plugging in the values, we get:

Volume percentage of ethanol = (10 ml ÷ 260 ml) x 100%

Volume percentage of ethanol = 3.85%

Therefore, the volume percentage of ethanol in the mixture is 3.85%.

Amino acids as acidic, basic, neutral polar, or neutral nonpolar are

Part A: NH₂: Basic, CH₃: Neutral nonpolar, CH₃: Neutral nonpolar, CH: Neutral nonpolar, NH₂: Basic, CH₂: Neutral nonpolar, H,N-C-coo: Acidic

Part B: OH: Neutral polar, CH₂: Neutral nonpolar, HON-C-COO: Acidic, H,N-C-COO: Acidic.

Acidic amino acids: These amino acids have a carboxyl group (COOH) in their side chain, which makes them acidic. They can donate a hydrogen ion (H+) and have a negative charge at physiological pH.

Basic amino acids: These amino acids contain an amino group (NH2 or NH3+) in their side chain, which makes them basic. They can accept a hydrogen ion (H+) and have a positive charge at physiological pH.

To learn more about the Amino acids, follow the link:

https://brainly.com/question/31872499

#SPJ12

Photorespiration is a process which occurs in plants when there is not enough CO2 available for photosynthesis, resulting in the hydrolysis of ATP.

During photorespiration, oxygen is consumed and carbon dioxide is produced.

The light reactions of photosynthesis produce NADPH and ATP, and when cyclic electron flow is disrupted due to a mutation, the production of NADPH will be reduced.

Without NADPH, the Calvin cycle will not proceed, resulting in the production of glycolic acid, which is further broken down to form glycine, ammonia and carbon dioxide.

This process results in the hydrolysis of ATP and the consumption of oxygen, with the production of carbon dioxide as a by-product.

Photorespiration results in the hydrolysis of ATP, the consumption of oxygen and the production of carbon dioxide.

to know more about photorespiration refer here:

https://brainly.com/question/13433623#

#SPJ11

The H-alpha line at 656.28 nm, the H-beta line at 486.14 nm, the H-gamma line at 434.05 nm, the H-delta line at 410.17 nm, and the H-epsilon line at 397.00 nm are some of the most noticeable Fraunhofer lines in the sun's spectrum.

The Balmer series of hydrogen, which gave rise to these lines, is honored in their namesake.

learn more about the sun's spectrum here

https://brainly.com/question/2021598

#SPJ1

The H-alpha line at 656.28 nm, the H-beta line at 486.14 nm, the H-gamma line at 434.05 nm, the H-delta line at 410.17 nm, and the H-epsilon line at 397.00 nm are some of the most noticeable Fraunhofer lines in the sun's spectrum.

The Balmer series of hydrogen, which gave rise to these lines, is honored in their namesake.

The emission of light from the sun's surface, which is subsequently filtered via the sun's atmosphere, produces the sun's spectrum. Hydrogen, helium, calcium, iron, and other elements are among those found in the sun's atmosphere.

Some of the light emitted by the surface of the sun is absorbed by these substances as it travels through the atmosphere, producing dark absorption lines in the spectrum.

Each element has its own set of energy levels that map to particular light wavelengths that can be absorbed.

The photons in the light may be absorbed when light with these particular wavelengths travels through the element, elevating the electrons' energy levels.

Learn more about the sun's spectrum here:

brainly.com/question/2021598

#SPJ1

A catalyst will not have an impact on the position of equilibrium. Therefore option a is the correct answer.

Specifically, a catalyst is a substance that increases the rate of a chemical reaction without being consumed in the process. It does this by providing an alternative reaction pathway with a lower activation energy, which increases the reaction rate and therefore speeds up the rate at which equilibrium is achieved. The transition energy of the equilibrium is also lowered, meaning it will be easier for the reaction to move from the reactants to the products.

Therefore catalysts can alter the rate at which a reaction proceeds, but they cannot influence the position of equilibrium.

learn more about catalyst

https://brainly.com/question/318426

#SPJ11

The mass of 1 mole of solute dissolved to make the solution will be 40 g/mol (mass of 1 mole of solute).

To determine the mass of 1 mole of solute, we can use the molar mass of the solute. The formula for molar mass is:
Molar Mass = Mass of Solute ÷ Number of Moles

Let's use this formula to solve the problem:
Mass of Solute = 20 grams
Volume of Solution = 500 mL = 0.5 L
Concentration of Solution = 1 M
Number of Moles of Solute = Concentration × Volume = 1 M × 0.5 L = 0.5 mol

Now, we can use the molar mass formula to calculate the mass of 1 mole of solute:
Molar Mass = Mass of Solute ÷ Number of Moles
Molar Mass = 20 grams ÷ 0.5 mol
Molar Mass = 40 grams/mol

Therefore, the mass of 1 mole of solute is 40 grams.

Learn more about Mass here:

https://brainly.com/question/19694949

#SPJ11

The amount of oxygen needed for complete combustion of the toluene is 3.249 grams. The total moles of gaseous products formed are 3.971 moles. The molecules of water vapor formed are 8.684 x 10²².

One of the compounds used to increase the octane rating of gasoline is toluene. Suppose 38.4 mL of toluene (d= 0.867 g/mL) is consumed when a sample of gasoline burns in air. In order to solve the above problem, let us write the chemical equation for the combustion of toluene is as follows:

C₇H₈ + 9O₂ → 7CO₂ + 4H₂O

In the above reaction, we can see that 9 moles of oxygen are needed to completely combust one mole of toluene. Hence, the amount of oxygen needed for complete combustion of toluene can be calculated as follows:

n(C₇H₈) = m(C₇H₈)/M(C₇H₈)

n(C₇H₈) = d × V / M(C₇H₈)

n(C₇H₈) = 0.867 g/mL × 38.4 mL / 92.14 g/mol = 0.361 mol

So, the amount of oxygen needed for complete combustion of toluene = 9 × 0.361 = 3.249 g

In the above reaction, there are 11 moles of gaseous products, i.e., 7 moles of CO₂ and 4 moles of H₂O.

So, the amount of moles of gaseous products formed can be calculated as follows: n(gas) = 11 × n(C₇H₈)

n(gas) = 11 × 0.361 = 3.971 mol.

The amount of moles of H₂O formed can be calculated as follows:

n(H₂O) = 4 × n(C₇H₈)

n(H₂O) = 4 × 0.361 = 1.444 mol

Now, we can calculate the number of molecules of water vapor as follows:

n(H₂O) = N × Na

N = n(H₂O) / Na

N = 1.444 mol / 6.022 x 10²³ mol¯¹ = 8.684 x 10²²

Hence, the number of molecules of water vapor formed is 8.684 x 10²².

Learn more about Complete combustion here:

https://brainly.com/question/31123826

#SPJ11

Part A: True.

Part B: False. Rinsing with water may not be enough to clean the buret completely.

Part C: False. Soapy water should not be used to clean a buret since it can leave residue.

Part D: False. After rinsing with water and soapy water solution, the buret should be rinsed with distilled water and dried before adding the titrating solution.

Part E: False. The buret should be rinsed with the titration solution only once before beginning a titration.

Titration is a laboratory procedure used to compare a solution's concentration to that of a reference solution with known concentration. It entails gradually mixing the standard solution into the sample solution up until the reaction is finished, which can be detected by a colour change or another quantifiable signal.

In many disciplines, including chemistry, medicine, and environmental research, titration is used. It can be used to quantify the quantity of a certain component in a sample, examine the concentration of acids and bases, and ascertain the purity of a substance.

Titration calls for exact volume and concentration measurements, as well as safe chemical handling and disposal. There are several different kinds of titration techniques, including complexometric, redox, and acid-base titration.

Learn more about titration here:

https://brainly.com/question/2728613

#SPJ4

To neutralize 50.0 mL of 0.80 M NaOH, 200 mL of 0.20 M HCl are needed.

When sodium hydroxide (NaOH) and hydrochloric acid (HCl) are mixed, sodium chloride (NaCl) and water (H2O) are the results. The chemical formula for the neutralizing reaction is as follows:NaOH+HClNaCl+H2O.

We must apply the following balanced chemical equation for the neutralization reaction to calculate how much HCl is needed to neutralize 50.0 mL of 0.80 M NaOH:

HCl + NaOH NaCl + H2O

One mole of HCl interacts with one mole of NaOH to form one mole of NaCl and one mole of water, as shown by the equation.

Let's first determine the quantity of NaOH in moles.

Moles of NaOH = volume (in liters) x molarity

Moles of NaOH = 50.0 mL x (1 L/1000 mL) x 0.80 M

Moles of NaOH = 0.040 moles

moles of HCl = volume (in liters) x molarity

0.040 moles = volume (in liters) x 0.20 M

Volume (in liters) = 0.040 moles / 0.20 M

Volume (in liters) = 0.20 L

Finally, we can convert the volume from liters to milliliters:

Volume (in milliliters) = 0.20 L x (1000 mL/1 L)

Volume (in milliliters) = 200 mL

To know more about NaOH visit:-

https://brainly.com/question/29854404

#SPJ1