Physics High School

PLEASE ANSWER!!!
a ship sails a distance of 600 km at a speed of 20km/h.
A) for what amount of time was the ship sailing?
B) is this a scalar quantity or a vector quantity?

Answers

Answer 1

Answer:

A) 30h

B) Scalar quantity

Explanation:

Part A

[Note: v represents speed, d represents distance, and t represents time]

Given:

[tex]d = 600 km[/tex]

[tex]v = 20 km/h[/tex]

Required:

[tex]t = ?[/tex]

Analysis:

[tex]v = \frac{d}{t} \\t = \frac{d}{v}[/tex]

Solution:

[tex]t = \frac{d}{v} \\t = \frac{600 km}{20 km/h} \\t = 30 h[/tex]

Statement:

Therefore, the ship was sailing for 30 hours.

--------------------------------------------------------------------------------------------------------------

Part B

This is a scalar quantity because time only has magnitude and can never be given direction so it can never be a vector quantity.

Related Questions

An object is moving across a surface, but it does not gain or lose speed. Which best describes the object's force?
O The net force is positive.
O The net force is zero.
The positive force is greater than the negative force.
O The negative force is greater than the positive force.
Mark this and retum
Save and Exit
Next
Submit

Answers

Answer:

The net force is positive

Explanation:

This would mean that altogether, the force would cause the object to always be going the same way, and if it is not gaining or losing speed, we can say the force has not changed and that the object has reached terminal velocity. It is not correct to say that the positive is greater than the negative as friction also causes some type of effect and it is neither positive nor negative

Most solar hot water systems are fitted with gas or electric "boosters" that can also heat the water.

Describe why you think these are necessary.

DUE IN 2 HOURS PLEASE HELP!!

Answers

To provide hot water on cloudy days or when demand exceeds supply, most solar water heaters come with a gas or electric booster. A gas booster usually produces fewer greenhouse gas emissions unless renewable electricity is used or the booster is a heat pump.

3. Take sugar, oil, corn syrup, a glass and water. Pour the water in the glass and then add each of the above the substances one after the other. Observe and note your observations. And give reason for your observation.

Answers

Here are the observations

Sugar:-

Sugar is soluble in water so It will dissolve in water .

Corn syrup:-

Corn syrup is also basically a sugar.It will dissolve in water too .If we shake the mixture in glass then corn syrup will be dissolved.

Oil:-

Oil is not soluble in waterHence it won't dissolve in water.It will float over water and make two layers

Ella is blowing up balloons in preparation for her sister's birthday. Ella finds some balloons hanging outside the house explode after a few hours. Explain why.​

Answers

Answer:

they were in the sun for long

Group elements number 11 to 20 as either metallic, non metallic or metalloid.​

Answers

Answer:

The elements are grouped into the different substances by color. As you can see, Lithium, Beryllium, Sodium, Magnesium, Aluminum, Potassium, and Calcium are metals out of the first 20 elements.

Hydrogen, Helium, Carbon, Nitrogen, Oxygen, Fluorine, Neon, Phosphorus, Sulfur, Chlorine, and Argon, are non-metals within the first 20 elements.

Boron and Silicon count as Metalloids in the Periodic Table (properties of both metals and non-metals)

reference- socatric q and a

Explanation:

Answer:

(11-13) - Metals

(14) - Metalloid

(15-18) - Non- metals

(19-20) - Metals

Explanation:

The elements from 11 to 13 are metals. They are Sodium(Na), Magnesium(Mg) and Aluminum(Al) respectively.

The element 14 is a metalloid. It’s Silicon(Si).

The elements from 15 to 18 are non metals. The 18th element is a noble gas known as Argon(Ar).

The elements from 15 to 17 are Phosphorus(P), Sulphur(S) and Chlorine(Cl).

The elements from 19 to 20 are metals. They are Potassium(K) and Calcium(Ca).

Một bóng đèn có hiệu điện thế định mức là 110V. Đặt vào hai đầu bóng đèn các hiệu điện thế sau đây, hỏi trường hợp nào dây tóc của đèn sẽ đứt?

Answers

Answer:

fhaiisjrbekxkrkebxnsiiwj4bnds

A man pulls his luggage on a 30 degree incline with a constant force of 25 N. How
much work does he do after walking 20.0 m?
a) 430 J
b) 330J
c) 1500J
d) 250 J

Answers

Force=F=25NDisplacement=s=20mAngle=30°

We know

[tex]\boxed{\sf W=Fscos\theta}[/tex]

[tex]\\ \sf\longmapsto W=25(20)cos30°[/tex]

[tex]\\ \sf\longmapsto W=500\times \dfrac{\sqrt{3}}{2}[/tex]

[tex]\\ \sf\longmapsto W=250\sqrt{3}[/tex]

[tex]\\ \sf\longmapsto W=250(1.73)[/tex]

[tex]\\ \sf\longmapsto W\approx 430J[/tex]

Option a) 430 J work done he do after walking 20.0 m.

What is work?

Work, in physics, is a measure of energy transfer that happens when an object exists moved over a distance by an external force at least part of which exists involved in the direction of the displacement.

Displacement exists as the distance moved in a straight line, in a provided direction, from the starting point. Displacement exists as a vector quantity as it includes size and direction.

An angle stands the figure formed by two rays, named the sides of the angle, sharing a standard endpoint, named the vertex of the angle.

Force=F=25NDisplacement=s=20mAngle=30°

⇒[tex]W=Fcos\theta[/tex]

⇒[tex]W=25(20)cos 30^{0}[/tex]

Then,

⇒[tex]W=50*\sqrt{3} /2[/tex]

⇒[tex]W=250\sqrt{3}[/tex]

Hence,

⇒[tex]W=250(1.73)[/tex]

[tex]W[/tex] approximately 430J.

Hence, Option a) 430 J work done he do after walking 20.0 m.

To learn more about Displacement refer to:

https://brainly.com/question/321442

#SPJ2

DOES STONE DISPLACE MORE WATER THAN ITS WEIGHT

Answers

Of course it does!!!

Write down the conservation of momentum?​

Answers

Law of conservation of momentum states that when two objects collide with each other , the sum of their linear momentum always remains same or we can say conserved and is not effected by any action, reaction only in case is no external unbalanced force is applied on the bodies.
Let,
m
A
​
= Mass of ball A
m
B
​
= Mass of ball B
u
A
​
= initial velocity of ball A
u
B
​
= initial velocity of ball B
v
A
​
= Velocity after the collision of ball A
v
B
​
= Velocity after the collision of ball B
F
ab
​
= Force exerted by A on B
F
ba
​
= Force exerted by B on A
Now,
Change in the momentum of A= momentum of A after the collision - the momentum of A before the collision
= m
A
​
v
A
​
−m
A
​
u
A
​

Rate of change of momentum A= Change in momentum of A/ time taken
=
t
m
A
​
v
A
​
−m
A
​
u
A
​

​

Force exerted by B on A (F
ba
​
);
F
ba
​
=
t
m
A
​
v
A
​
−m
A
​
u
A
​

​
........ [i]
In the same way,
Rate of change of momentum of B=
t
m
b
​
v
B
​
−m
B
​
u
B
​

​

Force exerted by A on B (F
ab
​
)=
F
ab
​
=
t
m
B
​
v
B
​
−m
B
​
u
B
​

​
.......... [ii]
Newton's third law of motion states that every action has an equal and opposite reaction, then,
F
a
​
b=−F
b
​
a [ ' -- ' sign is used to indicate that 1 object is moving in opposite direction after collision]

Using [i] and [ii] , we have
t
m
B
​
v
B
​
−m
B
​
u
B
​

​
=−
t
m
A
​
v
A
​
−m
A
​
u
A
​

​

m
B
​
v
B
​
−m
B
​
u
B
​
=−m
A
​
v
A
​
+m
A
​
u
A
​

Finally we get,
m
B
​
v
B
​
+m
A
​
v
A
​
=m
B
​
u
B
​
+m
A
​
u
A
​

This is the derivation of conservation of linear momentum.

Which quantity can be measured directly using a micrometer screw gauge? A the area of a sheet of paper B the mass of a sheet of paper с the thickness of a sheet of paper D the volume of a sheet of paper​

Answers

Answer: C) the thickness of a sheet of paper.

Explanation:

A micrometer screw gauge is a tool that measures distances (in order of millimeters), from this, we can see that the correct option is C: the thickness of a sheet of paper.

Now let's expand on this.

Knowing that the micrometer only can measure distances, we need to analyze which of the options is only a distance.

Notice that while area and volume have similar units, are really different things.

So analyzing the options we have:

A) "the area of a sheet of paper"

To find the area we need two measures (length and width) and then multiply this, but with a micrometer, we never measure the length of a sheet of paper (the maximum measure that you can get in a micrometer is of a few centimeters).

B) "the mass of a sheet of paper"

We can't measure mass with a micrometer.

C) " the thickness of a sheet of paper"

The thickness of a sheet of paper is of the order of 1mm, so we can easily measure this with a micrometer screw gauge.

D) " the volume of a sheet of paper​"

We have a similar problem as the one seen in A.

Then the correct option is C.

If you want to learn more, you can read:

https://brainly.com/question/16017208

A motorcycle moving with velocity and 30m/s accelerate with 4m/s2 to gain velocity of 6mls. calculate its time to gain that velocity​

Answers

Initial velocity=30m/s=uAcceleration=a=4m/s^2Final velocity=v=6m/sTime=t

Using first equation of kinematics

[tex]\boxed{\sf v=u+at}[/tex]

[tex]\\ \sf\longmapsto t=\dfrac{v-u}{a}[/tex]

[tex]\\ \sf\longmapsto t=\dfrac{30-6}{4}[/tex]

[tex]\\ \sf\longmapsto t=\dfrac{24}{4}[/tex]

[tex]\\ \sf\longmapsto t=6s[/tex]

if a girl is running along a straight road with uniform velocity 1.5 metre per second find the acceleration​

Answers

Answer:

Acceleration is 0.

Explanation:

Since the girl is running with a uniform velocity, meaning she is moving at a constant rate, she is not accelerating. Acceleration only occurs when the speed of an object increases, decreases, or if there is a change in direction.

what is the kinetic energy of a 2,000-kg car moving at 20m/s

Answers

Answer:

400k

Explanation:

Formula for KE = [tex]\frac{1}{2} mv^{2}[/tex]

Plug in:

KE =  [tex]\frac{1}{2} mv^{2}[/tex]

KE =  [tex]\frac{1}{2}[/tex] × 2000 × 20^2

Solve:

1000 × 400 = 400,000 or 400k

Hope this helped.

Answer : 400000J OR 4×10^4J

Kinetic energy= 1/2mv^2

Here, m=2000kg; V=20m/s

1/2×2000×20×20=400,000J

How does the comets energy change as it moves from point a to point d

Answers

Answer:

At point A, the comet has the least kinetic energy because the comet is resting. 3. From point B to point D its orbit's potential energy is decreasing and its kinetic energy is increasing meaning it's moving more and more

2. ¿Puede haber trabajo en un sistema si no hay movimiento
a. Sí, si hay una fuerza siempre.
b. Sí, ya que el movimiento es sólo relativo.
c. No, ya que un sistema que no se mueve no tiene energía.
d. No, porque la ecuación de trabajo lo define.

Answers

Answer:

d. No, porque la ecuación de trabajo lo define.

Explanation:

En Física, el trabajo realizado se puede definir como la cantidad de energía transferida cuando un objeto o cuerpo se mueve a lo largo de una distancia debido a la acción de una fuerza externa.

Matemáticamente, el trabajo realizado viene dado por la fórmula;

[tex] W = F * d [/tex]

Dónde;

W es el trabajo realizado.F representa la fuerza que actúa sobre un cuerpo. d representa la distancia recorrida por el cuerpo.

Por lo tanto, podemos deducir de la definición de trabajo y su fórmula que el trabajo se realiza cuando un objeto (cuerpo) se mueve una distancia o experimenta cualquier forma de desplazamiento mientras transfiere energía.

how to find the mechanical advantage

Answers

To determine its mechanical advantage you'll divide the length of the sloped side by the width of the wedge. For example, if the slope is 3 centimeters and the width is 1.5 centimeters, then the mechanical advantage is 2, or 3 centimeters divided by 1.5 centimeters.

Answer:

[tex]{ \bf{mechanical \: adv = \frac{load}{effort} }}[/tex]

a car is stationary at first.it moves off with.acceleration of 2m.s-2.Calculate how far it will move in 10s
​

Answers

Answer:

100 m.

Explanation:

At first the car was stationary, so its inicial velocity is zero. Considering its inicial position 0 m and using the Equation of motion for the position:

X(t) = Xo + vo.t +a[tex]t^{2}[/tex]/2 , vo=0, Xo=0, a=2m/[tex]s^{2}[/tex]

X(10) = (2 x [tex]10^{2}[/tex])/2 = 100 m.

what is the difference between MKS system and SI system of measurement​

Answers

Answer:

The MKS (metre, kilogram, second) system of units is the fundamental core of the SI (Systeme Internationale, or International System) of measurement. As various fields grow new forms of measurements based on MKS, terms or exact definitions may vary in different scientific or engineering disciplines. These inconsistencies are sorted out by the international committee that defines the SI system of units and keeps it up to date.

So the MKS is the static core, and the SI is the evolving, growing system of metric measurement.

Metres and kilograms were introduced after the French Revolution around 1790. Seconds were added by the 1830s, building the MKS system. More units came later. By 1948, a need was seen to develop a clear and consistent set of terms for measurement, and this led to 12 years of work, ending with the release of the first version of the SI in 1960.

The SI now has seven base units of measure. It begins with the original three metre, kilogram, and second, and adds the ampere for electricity, candela for light, kelvin for temperature, and mole for amount (number of atoms or molecules) of a substance.

The SI defines how each fundamental unit can be measured or obtained experimentally. These definitions have changed over time. For example, the metre was originally a measure related to the circumference of the Earth, then a set number of waves of a particular wavelength, and now a distance traveled by light in a vacuum in a certain period of time.

The SI also defines modifying terms such as milli-, centi-, and kilo- that are a specific number of each unit.

The SI includes many other derived units, as well.

By standardizing international use of measurements across different fields of science and engineering, the SI reduces confusion that would slow scientific progress and error that can produce engineering catastrophe such as the loss of the Mars Climate Orbiter in 1999 due to a table that should have been in metric units (kilograms and meters) being provided in United States customary units (pounds and inches).*

The Mars Climate Orbiter and its mission were lost due to a failure to use SI units consistently.

Hope this help you!:)

A car is moving with the velocity of 90km/h. If the car come to rest after 10 seconds. Calculate the final velocity and distance covered by the car within that time.

plz wirte the full formula ​

Answers

Answer:

you can learn from here

https://www.toppr.com/ask/en-bd/question/a-car-is-moving-with-a-velocity-of-10-ms-the-driver-sees-a-wall/

A body having uniform velocity has zero acceleration? give reason​

Answers

Answer:

A body having uniform velocity has zero acceleration because

there is not change in velocity.

in a cathode-ray tube, particles are fired at the screen. What are these particles

Answers

Thomson's experiments with cathode ray tubes showed that all atoms contain tiny negatively charged subatomic particles or electrons.

is placing a compass near a wire with live electrical current biology, chemistry, or physics?

Answers

The process of PLACING a compass wherever you want it involves Biology.  Biology deals with everything that has to happen for your brain to send instructions to your muscles, your muscles to operate your arm and your hand, and your hand to move the compass to where you want it, while your eyes keep track of what's happening and send course-corrections through your brain.

Once you get the compass there and see it start doing strange things, those EFFECTS are explained by laws of nature that are covered in Physics.

Placing a compass near a wire with live electrical current involves physics. Because, the deflection in magnetic field by the current from the electrical wire is dealt with physics.

What is magnetic field ?

A magnetic field is generated by the field lines originating from a magnet or an electrical  coil. The moving current is always associated with a magnetic field.

A compass acts as a tiny magnet and it deflects to the north in  the absence of an electrical field. If an electric field is brought in contact with the compass the needle will deflect into the direction of the magnetic field from the wire.

The strength of a magnetic field, associated electric field, magnetic flux etc. are more focused in the branches of physics. The magnetic properties of a substance is a physical property.

Find more on magnetic properties:

https://brainly.com/question/4242549

#SPJ2

explain why resistors connected in parallel are called current dividers​

Answers

Explanation:

A parallel circuit is often called a current divider for its ability to proportion—or divide—the total current into fractional parts. Once again, it should be apparent that the current through each resistor is related to its resistance, given that the voltage across all resistors is the same

Q: Riri wants to bake a cake. She adds flour, sugar, egg, baking soda, and yeast into a bowl and mixed them together. After all the ingredients are mixed, she leaves the dough for 30 minutes and the dough starts to rise. Which changes Occurred in this process? Explain your reason.​

Answers

Answer:

I don't know what you mean about which changes occurred in this process but if its why the dough starts rising then its caused by the carbon dioxide in baking soda and yeast which is a fungus

Answer:

When baking,flour is mixed with water,the other ingredients and yeast to form a paste called a dough.what happens is that the zymase enzyme from the yeast acts on the sugars to form carbon dioxide and alcohol.the carbon dioxide begins to form bubbles in the dough causing it to rise..

I hope this helps

Explain why a person travelling in a bus falls forward when bus stops suddenly

Answers

Answer:

Cause of Inertia of Motion

Explanation:

It can be explained as follows...when the moving bus suddenly stops, the lower part of the body of the passenger contact with the bus suddenly comes to rest while the upper part of the body tends to retain its state of motion due to inertia. As a result, the passenger is thrown forward.

which of the following is not an example of static charge?

a.
stationary electrons
b.
stationary protons
c.
moving electrons
d.
stationary neutrons

Answers

For this question the answer is C.

Calculate the relative atomic mass of MgO​

Answers

Answer:

MgO relative atomic mass is 40

Explanation:

Mg=24

O=16

balloon moves backward when air rushes out of it why​

Answers

Answer:

Because the air can move out of the balloon at such a speed, it propells the balloon forward.

Explanation:

SmolFox no longer exists

~Chad~

The action of the balloon pushes against the balloon moving it in the backward direction

What is newton's third law of motion ?

Newton's third law of motion states that every action have a equal and opposite reaction . If object A  exert force on object B , then object B will also exert an equal and opposite force on object A . Forces result from interaction of two bodies .

As we know according to Newton's third law of motion , when the air rushes out and pushes against the air which pushes  the balloon to move in opposite direction , the action of the balloon pushes against the balloon moving it in the backward direction

learn more about  Newton's third law of motion

https://brainly.com/question/974124?referrer=searchResults

#SPJ3  

why Fossil fuel has been used more in the existing world ?​

Answers

Fossil fuels are found most of the part of the world .It can be found easily by the people.It is free of cost or low cost.Thats why people can find it easily and in low cost.Also it is easy to useSo fossil fuel has been used more in existing world

A liquid has a density of 2 g/mL, the volume is measured at 20 mL, what is the mass of the liquid?

Answers

Answer: 40 grams, if it is two grams per mL and you have 20 mL, you multiply 2 grams/mL and you get the answer

Other Questions
Benefits Offered "Must-Haves": Where do convection currents occur atmophere Las hijas de Vernica ________ ya. No las veo aqu. (salir) what do you know about the formulation of the present constitution of Nepal? Identify the coordinates of the point shown. An image of a coordinate plane with one point plotted. It is 3 units to the left of the y-axis and 6 units below the x-axis. Question 23 options: (6, 3) (6, 3) (3, 6) (3, 6) Ben is writing a report about cultural life during the Han Dynasty in China from 206 B.C. to 220 A.D. Ben found a lot of facts, dates, opinions, and samples of poetry. What information should Ben quote in his report, and why? A. He should quote basic facts about life during the Han Dynasty to make sure he doesnt change the meaning of them. B. He should quote excerpts of poetry written during the Han Dynasty to help readers understand aspects of their literature and culture. C. He should quote experts who describe facts about important battles so readers understand the significance of the military during the Han Dynasty. D. He should quote descriptions of China's geographical borders during the Han Dynasty because they are too confusing to paraphrase. 11. The coordinates of AABC are A(-1,1), B(3,3),and C(4, -2). Find the coordinates of points A', B',and C' under the translations that takea. P(0,0) to Q(1,3)b. P(0, -1) to Q(4,-2) c. P(-1,-2) to Q(-2,2) What would happen to the body if the body temperature continue to decrease during the tenth hour instead of leaving off Hey can anyone help with this question? PLEASE HELP WILL GIVE BRAINLIEST!!!! Which hemispheres in the US in? Check all that apply.*Western HemisphereNorthern HemisphereSouthern HemisphereEastern Hemisphere Help me please The graphs below have the same shape. What is the equation of the bluegraph? Eli had mini-golf scores of -3, -4, and -3. What was his total score for the three rounds? we examine the effect of socioeconomic status on social anxiety after controlling for age, marital status and sex define office resources eassy on importance of medicine You can often use geometric figures to model objects in the real world. You can transfer your knowledge of the properties of these figures to better understand and describe the objects that they represent. For each shape the table, list three examples of real-world objects that could be modeled by the shape. Use your experiences, the Internet, newspapers, magazines, or other resources to uncover examples. Find formulas for X, Y, and Z in terms of A, B, and C. It may be necessary to make assumptions about the size of a matrix in order to produce a formula.[A B C 0] [1 0 X Y] = [0 1 Z 0]Find the formulas for X, Y, and Z. Note that I represents the identity matrix and 0 represents the zero matrix. The US imposes a tariff on the import of a computer chip that is also produced at higher cost by a US firm. The US firm is an important supplier to the US Navy. The US is probably using the _____ argument for protectionism.