Photosynthesis is a process in which plants prepare food using carbon dioxide, chlorophyll, and water in the presence of sunlight.

Answer:

Explanation:

It was Newton's genius that saw that it was true. He also realized that if it was true, the motion the earth experience would be unmeasurably small, especially in his time. Their instruments were just not good enough: crude and too approximate would be better descriptions.

Answer:

I don't know sorry' please

Answer:

About Transcript. Nuclear binding energy is the energy required to split an atom's nucleus into protons and neutrons. Mass defect is the difference between the predicted mass and the actual mass of an atom's nucleus. The binding energy of a system can appear as extra mass, which accounts for this difference.

Explanation:

PLZ MARK AS THE BRAINLIEST

I NEED IT URGENTLY

HAVE A GOOD DAY

MAY GOD BLESS U

: )

Answer:

38500

Explanation:

I looked it up so it may be wrong

Answer:

I dont know answer Sorry For that thank u

Explanation:

The three importance of measurement are as follows :-

Hope it is helpful to you

✌️✌️✌️✌️✌️✌️✌️

Answer:

change waterslide according to question. and you are good to go. check photo for solve

The person moving with speed upon leaving the waterslide is equal to 0.313 m/s while ignoring the friction.

If there is a loss of energy in any part of the system, there must be the same amount of a gain of energy in some other part of the isolated system.

Kinetic energy + Potential energy = constant

Therefore, the initial kinetic and potential energy of the person must be equal to the final kinetic and potential energy.

mgh₁ + mv₁²/2 = mgh₂ + mv₂²/2

gh₁ + v₁²/2 = gh₂ + v₂²/2

2gh₁ + v₁² = 2gh₂ + v₂²

2g(h₁ - h₂) = v₂² -  v₁²

[tex]v_2=\sqrt{2g(h_2-h_1) + v^2_1}[/tex]                                               .................(1)

Given, the mass of the person, m = 63 Kg

The initial speed of the person as at rest, v₁ = 0

Consider that the speed of the person while leaving the waterslide is v₂

The initial height of the person above the ground, h₁ = 6.0 mm

The height of the person leaving the waterslide, h₂= 1.0 mm

Substitute, the value of m, v₁, h₁ and h₂ in equation (1):

[tex]v_2 = \sqrt{2(9.8m/s^2)(6mm-1mm) + (0)^2}[/tex]

[tex]v_2 =\sqrt{2(9.8)\times 5 \times 10^{-3}} \;m/s[/tex]

[tex]v_2 =\sqrt{0.098}\; m/s[/tex]

v₂ = 0.313 m/s

Learn more about the law of conservation of energy, here:

https://brainly.com/question/12050604

#SPJ2

Answer:

The emf of a cell is the sum of the electric potential differences (PDs) produced by a separation of charges (electrons or ions) that can occur at each phase boundary (or interface) in the cell. The magnitude of each PD depends on the chemical nature of the two contacting phases.

Explanation:

pls mark brainliest

Explanation:

initial velocity(u)=30km/hr = 30*1000/60*60=8.33 m/s

final velocity(v) =60km/hr = 60*1000/60*60 =16.67 m/s

time taken(t) = 1 minutes

= 60 seconds

Now,

Average velocity = u+v/2

= 8.33 m/s + 16.67m/s÷2

=12.5 m/s

Answer:

Explanation:

[tex]\lambda\\[/tex] = v/f

^That is the formula we are going to use.

Now, we were given the speed (v), which is 20.

Now we need to find frequency, in order to solve for the wavelength.

Frequency is the amount of waves in a fixed unit of one second, meaning our F value is the value of 5 divided by 4.

5/4 = 1.25

Therefore our F is 1.25

Now lets plug it in

[tex]\lambda\\[/tex] = v/f

[tex]\lambda\\[/tex] = 20/1.25

[tex]\lambda\\[/tex] = 16

Conversion:

[tex]\lambda\\[/tex] = 8

Answer:

The velocity at that time would be [tex](-67.975\; \rm s)[/tex]. The velocity of this particle is continuously changing.

Explanation:

Differentiate the expression for position [tex]x[/tex] with respect to time [tex]t[/tex] to find an expression for velocity.

[tex]\begin{aligned}v(t) &= \frac{d}{dt}[x(t)] \\ &= \frac{d}{dt} \left[ 7.4 + 9.2\, t - 2.1\, t^{3}\right]\\ &= 9.2 - 6.3\, t^{2}\end{aligned}[/tex].

Hence, at [tex]t = 3.5\; \rm s[/tex], velocity would be [tex]v(3.5) = 9.2 - 6.3 \times (3.5)^{2} = -67.975\; \rm m[/tex].

Since velocity [tex]v(t)[/tex] changes with time [tex]t[/tex], the velocity of this particle is continuously changing.

Converse:

if q , then p

Inverse:

If not p , the not q.

Contra Positive:

If not q, then not p.

If then statement is a conditional statement. In this statement there is some condition at the first part of the sentence and then in the second part there is a conclusion.

The example of if then sentence is as follows,

If this camel is thirsty, then it will drink water from the well.

In this example there is a condition in first part that if camel is thirsty, in the second part there is conclusion which states that then it will drink water from well.

Learn more at https://brainly.com/question/24294393

Answer:

could and largejsjisj and we look like they can get to

Sabemos todo material tiene asociado un coeficiente de difracción n.

De tal forma que la velocidad de una onda electromagnetica que viaja a travez de dicho material, será:

v = c/n

donde c es la velocidad de la luz.

Con la información dada, podremos concluir que el coeficiente de difracción del medio Q es dos veces el del medio P.

Ahora veamos como llegamos a esto:

Sabemos que en el medio P, la onda recorre una distancia 8*D en un tiempo 4*T

entonces la velocidad de la onda en el medio P es:

[tex]V_p = \frac{8*D}{4*T} = 2*\frac{D}{T}[/tex]

Mientras que en el medio Q, recorre una distancia 4*D en un tiempo 4*T, por lo que la velocidad en el medio Q será:

[tex]V_Q = \frac{4*D}{4*T} = \frac{D}{T}[/tex]

Podemos ver que:

[tex]V_P = 2*V_Q[/tex]

Reescribiendo las velocidades como el cociente entre la velocidad de la luz y el correspondiente coeficiente de difracción obtenemos:

[tex]\frac{c}{n_P} = 2*\frac{c}{n_Q} \\\\n_Q = 2*n_P[/tex]

Es decir, podemos concluir que el coeficiente de difracción del medio Q es dos veces el del medio P.

Si quieres aprender más sobre el tema, puedes leer:

https://brainly.com/question/11779790

Answer:

Explanation:

        16093.4

Answer:

a. 5 batteries b. 1050 mAh

Explanation:

Here is the complete question

A student project is required to be portable and hand held. It requires 6 V DC power at a current of 150 mA. The batteries for the power supply must last for a minimum of 7 hours of continuous operation. NiMH rechargeable batteries in AA size are to be used. A) How many batteries are needed? B) What mAh capacity should the batteries have?

Solution

A) How many batteries are needed?

Since the nominal voltage for a single NiMH battery is 1.2 V per battery and we require 6V DC power, we combine the batteries in series to obtain a total voltage of 6 V. The number of batteries required, n = total voltage/voltage per cell = 6V/1.2V per battery = 5 batteries

So, the number of batteries needed is 5.

B) What mAh capacity should the batteries have?

Since the batteries are in series, they would each deliver a current of 150 mA. Since we require a current of 150 mA for 7 hours, the number of milliampere-hours capacity mAh of batteries required is Q = It where I = current = 150 mA and t = time = 7 hours.

So, Q = It = 150 mA × 7 h = 1050 mAh.

So, the batteries should have a mAh of 1050 mAh

Answer:

Matter is any substance that has mass and takes up space by having volume

Our sun is 27 million times larger than our moon. Based on its mass, the sun's gravitational attraction to the Earth is more than 177 times greater than that of the moon to the Earth. If tidal forces were based solely on comparative masses, the sun should have a tide-generating force that is 27 million times greater than that of the moon. However, the sun is 390 times further from the Earth than is the moon. Thus, its tide-generating force is reduced by 3903, or about 59 million times less than the moon. Because of these conditions, the sun’s tide-generating force is about half that of the moon.

Answer:

60

Explanation:

because it shows he is moving at a low speed

Answer:

0.48N

Explanation:

according to the second law of motion

force=mass×acceleration

the mass in this question is 0.025,the acceleration 19

therefore f=0.025×19

=0.48N

I hope this helps

The approximate temperature of the star as determined is D) 5500 K.

The Wien's displacement law relates the maximum wavelength of a body to its absolute temperature. Wien's displacement law states that:

λ = [tex]\frac{b}{T}[/tex]

where λ is the maximum wavelength of the body, b is the constant of proportionality and T is the absolute temperature.

Thus from the given question, λ = 525 nm (525 x [tex]10^{-9}[/tex]), and b = 2.9 x [tex]10^{-3}[/tex] mK.

So that,

525 x [tex]10^{-9}[/tex] = [tex]\frac{2.9*10^{-3} }{T}[/tex]

Make T the subject of the formula to have;

T = [tex]\frac{2.9*10^{-3} }{525*10^{-9} }[/tex]

  = 5523.81

T = 5523.81 K

T ≅ 5500.00 K

The approximate temperature of the star in Kelvin is 5500 K.

For more clarifications, kindly visit: https://brainly.com/question/20038918

Answer:

Explanation:

Givens

t = 10 seconds

vi = 0

vf = 3600 mph

a = ?

d = 10000 feet

Formula

a = (vf - vi)/t

Solution

vf = 3600 mph * 1 hr / 3600 seconds * 5280 feet / 1 mile = 5280 ft / sec

a = (5280 - 0)/10

a = 528 ft/sec^2

Answer:

E_O = 96J

Explanation:

E_O = E_I*(%e/100%)

E_O = 120J*(80%/100%)

E_O = 96J

Answer:

The acceleration due to gravity at Pluto is 0.0597 m/s^2.

Explanation:

Length, L = 1 m

10 oscillations in 257 seconds

Time period, T = 257/10 = 25.7 s

Let the acceleration due to gravity is g.

Use the formula of time period of simple pendulum

[tex]T = 2\pi\sqrt{\frac{L}{g}}\\\\25.7 = 2 \times 31.4\sqrt{\frac{1}{g}}\\\\g = 0.0597 m/s^2[/tex]

Answer:

that when two object interact, they apply forces to one another that are equal in magnitude and opposite in direction.

Explanation:

Newton's third law: the law of action and reaction

Answer:

Remember the relation:

Speed*Time = Distance.

We can estimate that the speed at which an earthquake "moves", in the surface, is:

S = 6km/s  (this is a low estimation actually)

Then if the wave is detected 12.5 minutes after the earthquake, we know that it traveled for 12.5 minutes before reaching the detector.

So we know the speed of the wave and the time it took to reach the detector, then we can use the equation:

Speed*Time = Distance.

to find the distance.

First, we should write the time in seconds

we know that:

1 min = 60 s

then:

12.5 min = 12.5*(60 s) = 750 s

Then, the wave traveled with a speed of 6 km/s for 750 seconds until it reached the detector, then the distance that it traveled is:

(6km/s)*750s = 4500 km

The distance between the detector and the site of the quake is around 4500 km.

The answer are :

A. Distance = 15.71 m , The displacement = 10 m

B. distance traveled will increase, displacement will decrease

C. The distance = 31.42 m , Displacement = 0

Distance is a scalar quantity, while displacement is a vector quantity. Displacement is the distance travelled in a specific direction.

Given that a child rides a pony on a circular track with a radius of 5 m, after the child has gone halfway around the track

(A)

The distance traveled will be = 2[tex]\pi[/tex]r / 2

The distance = πr

The distance = 22/7 x 5

The distance = 15.71 m

The displacement = 2r

The displacement = 2 x 5

The displacement = 10 m

(B) The distance traveled will increase as the child completes one circle of the track but the displacement will decrease because the displacement in one cycle of a circular motion is zero since it is a vector quantity.

(C) The distance after a complete circuit of the track = 2πr

The distance = 2 × 22/7 × 5

The distance = 31.42 m

The displacement after a complete circuit of the track will be zero.

That is;

Displacement = 0

Therefore, the distance traveled and the displacement after the child has gone halfway around the track are 15.7 m and 10 m respectively. While the distance and displacement after a complete circle of the track are 31.42 m and 0 respectively.

Learn more about Displacement here: https://brainly.com/question/2109763

#SPJ1

Answer:

Slowly and smoothly lol

Answer:

S.I. on Rs. 1600 = T.D. on Rs. 1680. Rs. 1600 is the P.W. of Rs. 1680, i.e., Rs. 80 is on Rs. 1600 at 15%. Time =100 x 80year=1year = 4 months.1600 x 153

Explanation:

Is this you are?

[tex]\boxed{\sf E=QV^2}[/tex]

[tex]\\ \sf\longmapsto Q=\dfrac{E}{V^2}[/tex]

[tex]\\ \sf\longmapsto Q=\dfrac{3.92\times 10^{-4}}{24^2}[/tex]

[tex]\\ \sf\longmapsto Q=\dfrac{3.92\times 10^{-4}}{576}[/tex]

[tex]\\ \sf\longmapsto Q=0.006\times 10^{-4}C[/tex]

[tex]\\ \sf\longmapsto Q=6\times 10^{-1}C[/tex]

[tex]\\ \sf\longmapsto Q=0.6C[/tex]

Now

[tex]\boxed{\sf Q=CV}[/tex]

[tex]\\ \sf\longmapsto C=\dfrac{Q}{V}[/tex]

[tex]\\ \sf\longmapsto C=\dfrac{0.6}{24}[/tex]

[tex]\\ \sf\longmapsto C=0.025F[/tex]

Note:-