Parwin Corporation plans to sell 40,000 units during August. If the company has 16,500 units on hand at the start of the month, and plans to have 17,500 units on hand at the end of the month, how many units must be produced during the month?

Answers

Answer 1

Answer:

41,000 units

Explanation:

The computation of units must be produced during the month is shown below:-

Units Produced = Units at Year End - Units at beginning + Units Sold

= 17,500 units - 16,500 units + 40,000  units

= 57,500 units - 16,500  units

= 41,000 units

Therefore for computing the units produced during the month we simply applied the above formula.

Answer 2

The company must produce 41000 units during the month. The entire cost of direct materials and labor as well as the total cost of manufacturing overhead may be added together to get the overall cost of the product.

Below is a calculation of the number of units that must be generated during the month:-

Units Produced = Units at Year's End - Units at Start + Units Sold

40,000 units + 17,500 units less than 16,500 units.

16,500 units less than 57,500 units

= 41,000 units

Therefore, we used the aforementioned calculation to calculate the number of units generated throughout the month.

All of the direct and indirect expenses firms incur when producing a good or rendering service are referred to as production costs. Various expenditures, including labor, raw materials, consumable manufacturing supplies, and general overhead, might be included in production costs.

Various expenditures, including labor, raw materials, consumable manufacturing supplies, and general overhead, might be included in production costs.

Learn more about the production costs here:

https://brainly.com/question/14814998

#SPJ6


Related Questions

1. A research project began with the selection of women who had recently had abdominal surgery. The project matched those women with controls and continued with measurements of abdominal muscle strength for both groups every three months for a year. This project was: A. Prospective study B. Retrospective study C. Experimental study D. Cross sectional study

Answers

Answer:

Abdominal rectus diastasis is a condition where the abdominal muscles are separated by an abnormal distance due to widening of the linea alba causing the abdominal content to bulge. It is commonly acquired in pregnancies and with larger weight gains. Even though many patients suffer from the condition, treatment options are poorly investigated including the effect of physiotherapy and surgical treatment. The symptoms include pain and discomfort in the abdomen, musculoskeletal and urogynecological problems in addition to negative body image and impaired quality of life. The purpose of this review was to give an overview of treatment options for abdominal rectus diastasis.

Results: The first treatment step is physiotherapy. However, evidence is lacking on which regimen to use and success rates are not stated. The next step is surgery, either open or laparoscopic, and both surgical approaches have high success rates. The surgical approach includes different plication techniques. The recurrence and complication rates are low, complications are minor, and repair improves low back pain, urinary incontinence, and quality of life. Robotic assisted surgery might become a possibility in the near future, but data are still lacking.

Conclusions: Evidence on what conservatory treatment to use is sparse, and more research needs to be done. Both open and laparoscopic surgery have shown positive results. Innovative treatment by robotic assisted laparoscopic surgery has potential, however, more research needs to be done in this area as well. An international guideline for the treatment of rectus diastasis could be beneficial for patients and clinicians.

Keywords: rectus diastasis, treatment options, physiotherapy, surgery, abdominoplasty, laparoscopy, robot assisted surgery

A practice, favored by unions, which contractually binds employers to hire only workers who are already members of the union is called a(n):

Answers

Answer:

The correct answer is: Closed Shop.

Explanation:

To begin with, the name of "Closed Shop" refers to a type of practice well known as "pre-entry closed shop" too that unions favored with the only purpose to obligate the companies to contract workers who are already members of the union itself so in that situation both the company and the union tend to have an agreement of maintaining certain salary price for the workers so they are not in a continous fight. Moreover, this practice allow the workers to be employed by the company only if they are members of the union and as long as they are members of it.

Oligopoly firms will seldom change prices but if one firm increases their price, others may follow if costs have ____________ .

Answers

Answer:

decreased

Explanation:

if firms have decreased then it would be likely to follow other firms to increase popularity

Oligopoly firms will seldom change prices but if one firm increases its price, others may follow if costs have Decreased.

What is Oligopoly?

A market structure known as an oligopoly has a limited number of enterprises, none of which can prevent the others from having a large impact. The market share of the major companies is calculated using the concentration ratio.

A market with a monopoly has only one producer, a duopoly has two businesses, and an oligopoly has three or more businesses. The maximum number of firms in an oligopoly is unknown, but it must be low enough so that each firm's actions have a significant impact on the others.

In the past, oligopolies have existed in the steel industry, the oil industry, the railroad industry, the tire industry, grocery store chains, and the wireless industry. An oligopoly can prevent new competitors from entering the market, stifle innovation, and raise prices, all of which are detrimental to consumers.

To learn more about Oligopoly follow the link.

https://brainly.com/question/28317513

#SPJ2

An increase in taxes when the economy is above full employment ​ ______ aggregate demand and real​ GDP, and the price level​ ______.

Answers

Question options :

A. increases; falls

B. decreases; falls

C. does not change; does not change

D. increases; rises

Answer:

B. decreases; falls

Explanation:

let us understand this by looking at the logic behind it. First when the economy is at full employment, there is high demand since there will be increase in money supply through increased circulation from salaries and wages. If government increases taxes, this will reduce purchasing power as money supply will be reduced and therefore demand will be reduced. Also price will fall since according to the Law of demand and supply, if demand is more than supply, price will increase

Mangum Co. is a large company that segments its business into cost and profit centers. The Cost center for the manufacture of Product M2T incurred the following costs in October:
Direct Labor: $25/unit
Direct Materials: $80/unit
Variable Overhead: $15/unit
Traceable Fixed Costs: $62,000
Common Fixed Costs: $100,000
Sales were 2,000 units in October. Each unit sells for $210. The M2T Department is being evaluated on overall profitability. In September, the department margin was $100,000. By how much did the department margin increase or decrease in October?
a. $100,000 decrease
b. $118,000 increase
c. $18,000 increase
d. $82,000 decrease

Answers

Answer: c. $18,000 increase

Explanation:

Department margin was $100,000 in September.

October Margin = Sales - Variable Costs - Traceable Fixed Costs

= (2,000 *( 210 - 25 - 80 - 15) ) - 62,000

= (2,000 * 90) - 62,000

= $118,000

= October Margin - September Margin

= 118,000 - 100,000

= $18,000 increase

Which one of these is the best description of a comparative market analysis? It shows what similar homes in the area have recently sold for It shows the list prices of similar homes in the area It’s a guide to the minimum acceptable offer It discloses issues with the home that are known to the seller

Answers

Answer:

It shows what similar homes in the area have recently sold for.

Explanation:

Answer:

The statement "It shows the same types of homes in the area that are presently sold" is considered to be the best description for the comparative market analysis.

Explanation:

A comparative market analysis is a tool that is used by the real estate agent in order to remove the value of the particular property via evaluation of the same types of homes that could be presently sold in a similar area.

For finding the best description regarding the comparative market analysis, we need to determine the following information:

It does not show the list prices of the same types of homes in the area.It does not guide for a minimum acceptable offer.Also, it does not disclose the issues for the income that are aware to the seller.

Therefore we can conclude that the first statement is correct

Learn more about the comparative market analysis here: brainly.com/question/16715737

It will cost $3,000 to acquire a small ice cream cart. Cart sales are expected to be $1,400 a year for three years. After the three years, the cart is expected to be worthless as that is the expected remaining life of the cooling system. What is the payback period of the ice cream cart?

Answers

Answer:

2.14 years

Explanation:

Payback calculates the amount of time it takes to recover the amount invested in a project from it cumulative cash flows

Payback period =  Amount invested / cash flows = $3,000 / $1,400 = 2.14 years

An annuity provides for 30 annual payments. The first payment of 100 is made immediately and the remaining payments increase by 8 percent per annum. Interest is calculated at 13.4 percent per annum. Calculate the present value of this annuity.

Answers

Answer:

$1423.38

Explanation:

number of payments ( number of years )(n) = 30

first payment = $100

interest calculated at : 13.4 % = 0.134

increment rate : 8 percent = 0.08

we can calculate the present value using this Equation

= (p / (r-g))  * [1 - [(1+g)/(1+r)]^n ]

where :

p / (r-g) = 100 / (0.134 - 0.08 ) = $1852

[1 - ((1+g)/(1+r)]^n ) =  (1 - ((1.08/1.134)^30 ) =  0.7686

hence the present value of this annuity = $1852 * 0.7686 = $1423.38

Note :

p ( first principal payment ) = $100

r ( calculated interest ) = 13.4% = 0.134

g ( increment interest ) = 8 % = 0.08

Selected data concerning operations of Cascade Manufacturing Company for the past fiscal year follow:

Raw materials used ..... $300,000

Total manufacturing costs charged to production during the year (includes raw materials, direct labor, and manufacturing overhead applied at a rate of 60 percent of direct labor costs) ..... 681,000

Cost of goods available for sale ...... 826,000

Selling and general expenses ...... 30,000

Beginning Inventories

Raw materials ...... $70,000

Work-in-process...... 85,000

Finished goods ...... 90,000

Ending Inventories

Raw materials ...... $80,000

Work-in-process ...... 30,000

Finished goods ....... 110,000

Determine each of the following:

a. Cost of raw materials purchased

b. Direct labor costs charged to production

c. Cost of goods manufactured

d. Cost of goods sold

Answers

Answer:

a.   Purchases $310,000

b.     Direct labor  $ 238,125

c. Cost of goods manufactured $ 736,000

d. Cost of goods sold $ 716,000

Explanation:

Cascade Manufacturing Company

Raw materials used ..... $300,000

Add Raw materials Ending  ...... $80,000

Less Raw materials  Beginning...... $70,000

a.   Purchases $310,000

Add Raw materials Ending to Raw materials used and subtract  Raw materials  Beginning to get  Raw materials  Purchases.

Total manufacturing costs $  681,000

Less Raw materials used ..... $300,000

Conversion Costs  $ 381,000

Conversion Costs = Direct Labor + Factory Overhead

$ 381,000=  x + 0.6 x

$ 381,000= 1.6x

b.   x=  Direct labor = $ 381,000/1.6=  $ 238,125

Factory Overhead= 0.6 *$ 238,125= $ 142875

Find Conversion Costs and then apply the ratio to get the direct labor costs.

c.

Cascade Manufacturing Company

Cost of goods manufactured

Raw materials  Beginning...... $70,000

Add Purchases $310,000

Less Raw materials Ending  ...... $80,000

Raw materials used ..... $300,000

Add Direct labor   $ 238,125

Factory Overhead $ 142875

Total manufacturing costs $  681,000

Add Work-in-process Beginning...... 85,000

Cost of goods available for manufacture $ 766,000

Less Work-in-process Ending...... 30,000

Cost of goods manufactured $ 736,000

Add and subtract as above to get the Cost of goods manufactured.

d.  Cascade Manufacturing Company

Cost of goods sold

Raw materials  Beginning...... $70,000

Add Purchases $310,000

Less Raw materials Ending  ...... $80,000

Raw materials used ..... $300,000

Add Direct labor   $ 238,125

Factory Overhead $ 142875

Total manufacturing costs $  681,000

Add Work-in-process Beginning...... 85,000

Cost of goods available for manufacture $ 766,000

Less Work-in-process Ending...... 30,000

Cost of goods manufactured $ 736,000

Add Finished goods Beginning...... 90,000

Cost of goods available for sale  $ 826,000

Less Finished goods Ending....... 110,000

Cost of goods sold $ 716,000

Add and subtract as above to get the Cost of goods sold.

The firm is an all-equity firm with assets worth $350 million and 100 million shares outstanding. It plans to borrow $100 million and use these funds to repurchase shares. The firm’s marginal corporate tax is 21%, and it plans to keep its outstanding debt equal to $100 million permanently. If the firm manages to repurchase shares at $4 per share, what is the per share value of equity for the leveraged firm? A) $2.71 per share B) $3.5 per share C) $3.61 per share D) $3.71 per share E) $4 per share

Answers

Answer:

B) $3.5 per share

Explanation:

Assets = Existing assets + Tax shield

= $350 million + 21% * $100 million

= $371 million

Equity = Asset - Debt

= $371 million - $100 million

= $271 million

The Shares are repurchase at $4

At this price, the firm would have 100 - 100/4 = 75 million shares outstanding .

Worth of shares outstanding = Equity / Outstanding shares  

Worth of shares outstanding = ($271 million / 75 million shares)

Worth of shares outstanding = $3.61 per shares

Luther Corporation
Consolidated Income Statement
Year ended December 31​ (in $millions)
2006 2005
Total sales 610.1 578.8
Cost of sales ​ (500.2) ​(355.3)
Gross profit 109.9 223.5
​Selling, general, and
administrative expenses ​ (40.5) ​(38.7​)
Research and development ​(24.6) (21.8​)
Depreciation and amortization ​(3.6) (3.9​)
Operating income 41.2 159.1
Other income −− −−
Earnings before interest and taxes​ (EBIT) 41.2 159.1
Interest income​ (expense) ​(25.1) ​(15.3​)
Pretax income 16.1 143.8
Taxes ​(5.5) (50.33​)
Net income 10.6 93.47
Price per share $16 $15
Sharing outstanding​ (millions) 10.2 8.0
Stock options outstanding​ (millions) 0.3 0.2
​Stockholders' Equity 126.6 63.6
Total Liabilities and​ Stockholders' Equity 533.1 386.7
Refer to the income statement above. ​ Luther's operating margin for the year ending December​ 31, 2005 is closest​ to:_________.
A. 13.7413.74​%
B. 21.9921.99​%
C. 27.4927.49​%
D. 32.9932.99​%

Answers

Answer:

27.48%

Explanation:

Calculation for Luther's operating margin for the year ending December​ 31, 2005

Using this formula

Operating margin = Operating income / Sales

Let plug in the formula

Operating margin= 159.1/578.8

Operating margin=0.2748*100

Operating margin=27.48%

Therefore Luther's operating margin for the year ending December​ 31, 2005 is 27.48%

One Step, Inc., is trying to determine its cost of debt. The firm has a debt issue outstanding with 27 years to maturity that is quoted at 105 percent of face value. The issue makes semiannual payments and has a coupon rate of 4 percent.


Requried:

a. What is the company's pretax cost of debt?

b. If the tax rate is 23 percent, what is the aftertax cost of debt?

Answers

Answer:

Before tax cost of debt=3.72%

After-tax cost of debt =2.87 %

Explanation:

The yield to maturity to Maturity van be worked out using the formula below:

YM =( C + F-P/n) ÷ ( 1/2× (F+P))

C- annual coupon,  

F- face value ,

P- current price,  

n- number of years to maturity

YM - Yield to maturity

DATA

C- 4%× 100 = 4, P- 105, F- 100

AYM = 4 + (100-105)/27 ÷ 1/2× (100+105)

=0.0372 ×  100= 3.72%

Yield to maturity =3.72%

Before tax cost of debt = Yield to maturity

Before tax cost of debt=3.72%

After tax cost of debt =Before tax cost of debt × (1-T)

Before tax cost of debt = 3.72%

Tax rate = 23%

After-tax cost of debt = 3.72%× (1-0.23) =2.87 %

After-tax cost of debt =2.87 %

The Matterhorn Corporation is trying to choose between the following two mutually exclusive design projects:
Year Cash Flow (I) Cash Flow (II)
0 –$87,000 –$55,000
1 36,900 11,700
2 47,000 34,500
3 27,000 28,500
Requirement 1:
(a) If the required return is 10 percent, what is the profitability index for each project? (Do not round intermediate calculations). Round your answers to 3 decimal places.
(b) If the required return is 10 percent and the company applies the profitability index decision rule, which project should the firm accept?
Requirement 2:
(a) If the required return is 10 percent, what is the NPV for each project? (Do not round intermediate calculations. Round your answers to 2 decimal places .

Answers

Answer:

PI for the first project = 1 + ($5,673.93 / 87,000) = 1.065

PI for the second project = 1 + ($5,561.23 / $55,000) = 1.101

b. the second project should be chosen because the PI is higher

NPV for 1 = $5,673.93

NPV for 2 =   $5,561.23

Explanation:

profitability index  = 1 + (NPV / Initial investment)

Net present value is the present value of after tax cash flows from an investment less the amount invested.  

NPV can be calculated using a financial calculator

for the first project

Cash flow in year 0 = –$87,000

Cash flow in year 1 = 36,900

Cash flow in year 2 = 47,000

Cash flow in year 3 =  27,000

I = 10%

NPV = $5,673.93

for the second project

Cash flow in year 0 = –$55,000

Cash flow in year 1 = 11,700

Cash flow in year 2 =  34,500

Cash flow in year 3 = 28,500

I = 10%

NPV = $5,561.23  

PI for the first project = 1 + ($5,673.93 / 87,000) = 1.065

PI for the second project = 1 + ($5,561.23 / $55,000) = 1.101

b. the second project should be chosen because the PI is higher

To find the NPV using a financial calculator:

1. Input the cash flow values by pressing the CF button. After inputting the value, press enter and the arrow facing a downward direction.

2. after inputting all the cash flows, press the NPV button, input the value for I, press enter and the arrow facing a downward direction.  

3. Press compute  

Rose Corporation, a calendar year corporation, had accumulated earnings and profits of $40,000 as of January 1, 2014. However, for the first six months of 2014 Rose Corporation had an operating loss of $36,000, and finished the year with a total net operating loss for tax year 2014 of $55,000. Rose Corporation distributed $15,000 to its shareholders on July 1, 2014. Which of the following is correct?A. The entire distribution of $15,000 is taxable as a dividend.B. The entire distribution is not taxable.C. The part of the distribution which is taxable as a dividend is $12,500.D. The part of the distribution which is taxable as a dividend is $14,000.

Answers

Answer:

C. The part of the distribution which is taxable as a dividend is $12,500.

Explanation:

Rose's total loss for the year = $55,000

we must prorate the loss: $55,000 / 12 months = $4,583.33 per month

loss allocated to the first 6 months = $4,583.33 x 6 = $27,500

retained earnings before the distribution = $40,000 - $27,500 = $12,500

since distributions must come from retained earnings to be considered dividends, then only $12,500 will be considered dividends. The remaining $2,500 will be considered a return of capital

The accountant for Mandarin Company is preparing the company's statement of cash flows for the fiscal year just ended. The following information is available:
Retained earnings balance at the beginning of the year $949,000
Net income for the year 295,000
Cash dividends declared for the year 55,000
Retained earnings balance at the end of the year 1,397,000
Cash dividends payable at the beginning of the year 12,600
Cash dividends payable at the end of the year 14,900
What is the amount of cash dividends paid that should be reported in the financing section of the statement of cash flows?
a. $55,000.
b. $57,300.
c. $82,500.
d. $2,300.
e. $52,700.

Answers

Answer: e. $52,700

Explanation:

Cash Dividend to be paid = Cash dividends payable at the beginning of the year + Cash dividends declared for the year - Cash dividends payable at the end of the year

= 12,600 + 55,000 - 14,900

= $52,700

hi , what is third-party companies??? thank

Answers

Answer:

A 'third party', is any entity that a company does business with. This may include suppliers, vendors, contract manufacturers, business partners and affiliates, brokers, distributors, resellers, and agents.

The monetary value of a homemaker's time CANNOT be estimated by

A. comparing the value of the services to the spouse's wage rate.
B. measuring the marginal value of the services by the homemaker's wage rate received in a part-time job.
C. measuring the services in terms of current market prices.
D. measuring the value of the services by looking at the homemaker's opportunity costs.

Answers

Answer: measuring the services in terms of current market prices

Explanation:

Based on the information that has been provided in the question, it should be noted that the monetary value of a homemaker's time can be estimated by

comparing the value of the services to the spouse's wage rate, measuring the marginal value of the services by the homemaker's wage rate received in a part-time job and also measuring the value of the services by looking at the homemaker's opportunity costs.

Therefore, the option that measuring the services in terms of current market prices is not estimated.

Listed below are transactions that might be reported as investing and/or financing activities on a statement of cash flows. Possible reporting classifications of those transactions are provided also.

Required:
Indicate the reporting classification of each transaction by entering the appropriate classification code. (The first item is provided as an example.)

Classifications
+ I Investing activity (cash inflow)
– I Investing activity (cash outflow)
+ F Financing activity (cash inflow)
– F Financing activity (cash outflow)
N Noncash investing and financing activity
X Not reported as an investing and/or a financing activity


Classifications Transactions
+I 1. Sale of land.
2. Issuance of common stock for cash.
3. Purchase of treasury stock.
4. Conversion of bonds payable to common stock.
5. Lease of equipment.
6. Sale of patent.
7. Acquisition of building for cash.
8. Issuance of common stock for land.
9. Collection of note receivable (principal amount).
10. Issuance of bonds.
11. Issuance of stock dividend.
12. Payment of property dividend.
13. Payment of cash dividends.
14. Issuance of short-term note payable for cash.
15. Issuance of long-term note payable for cash.
16. Purchase of marketable securities ("available for sale").
17. Payment of note payable.
18. Cash payment for five-year insurance policy.
19. Sale of equipment.
20. Issuance of note payable for equipment.
21. Acquisition of common stock of another corporation.
22. Repayment of long-term debt by issuing common stock.
23. Payment of semiannual interest on bonds payable.
24. Retirement of preferred stock.
25. Loan to another firm.
26. Sale of inventory to customers.
27. Purchase of marketable securities (cash equivalents).

Answers

Answer:

Investing Activities refer to cashflow activities that have to do with Fixed assets as well as the ownership of the securities of other companies.

Financing Activities refer to cashflow activities that have to do with how the company sources funds for the company so this includes Equity related activities and long term liabilities.

1. Sale of land.  +I

2. Issuance of common stock for cash.  +F

3. Purchase of treasury stock.  -F

4. Conversion of bonds payable to common stock.  N

5. Lease of equipment.  N

6. Sale of patent.  +I

7. Acquisition of building for cash.  -I

8. Issuance of common stock for land.  N

9. Collection of note receivable (principal amount).  +I

10. Issuance of bonds.  +F

11. Issuance of stock dividend.  X

12. Payment of property dividend.  X

13. Payment of cash dividends.  -F

14. Issuance of short-term note payable for cash.  +F

15. Issuance of long-term note payable for cash.  +F

16. Purchase of marketable securities ("available for sale").  -I

17. Payment of note payable.  -F

18. Cash payment for five-year insurance policy.  X

19. Sale of equipment.  +I

20. Issuance of note payable for equipment.  N

21. Acquisition of common stock of another corporation.  -I

22. Repayment of long-term debt by issuing common stock.  N

23. Payment of semiannual interest on bonds payable.  X

24. Retirement of preferred stock.  -F

25. Loan to another firm.  -I

26. Sale of inventory to customers.  X

27. Purchase of marketable securities (cash equivalents). X

Please see appropriate classification below.

+ I Investing activity (cash inflow)

1. Sale of land.  +I

6. Sale of patent.  +I

9. Collection of note receivable (principal amount).  +I

19. Sale of equipment.  +I

– I Investing activity (cash outflow)

7. Acquisition of building for cash.  -I

16. Purchase of marketable securities ("available for sale").  -I

21. Acquisition of common stock of another corporation.  -I

25. Loan to another firm.  -I

+ F Financing activity (cash inflow)

2. Issuance of common stock for cash.  +F

10. Issuance of bonds.  +F

14. Issuance of short-term note payable for cash.  +F

15. Issuance of long-term note payable for cash.  +F

– F Financing activity (cash outflow)

3. Purchase of treasury stock.  -F

13. Payment of cash dividends.  -F

17. Payment of note payable.  -F

24. Retirement of preferred stock.  -F

N Noncash investing and financing activity

4. Conversion of bonds payable to common stock.  N

5. Lease of equipment.  N

8. Issuance of common stock for land.  N

20. Issuance of note payable for equipment.  N

22. Repayment of long-term debt by issuing common stock.  N

X Not reported as an investing and/or a financing activity

11. Issuance of stock dividend.  X

12. Payment of property dividend.  X

18. Cash payment for five-year insurance policy.  X

23. Payment of semi-annual interest on bonds payable.  X

26. Sale of inventory to customers.  X

27. Purchase of marketable securities (cash equivalents). X

Learn more at : https://brainly.com/question/17132056

Income statement.  
Use the data from the following financial statement in the popup​ window, Complete the partial income statement if the company paid interest expense of $18,100 for 2014 and had an overall tax rate of 40% for 2014. Complete the income statement​ below:  
​(Round to the nearest​ dollar.)
Income Statement Year Ending 2014
Sales revenue $360,000
Cost of goods sold $150,000
Fixed costs $42,900
Selling, general, and administrative expenses $27,200
Depreciation $45,900 EBIT $
Interest expense $ 18100
Taxable income $
Taxes $
Net income $
Find the accumulated depreciation for 2014 first.
The accumulated depreciation for 2014 is:_____(Round to the nearest dollar.)

Answers

Answer:

Income Statement Year Ending 2014

Sales revenue                      $360,000

Cost of goods sold               $150,000

Gross profit                           $210,000

Fixed costs                             $42,900

Selling, general, and

administrative expenses      $27,200

Depreciation                          $45,900

EBIT                                         $94,000

Interest expense                     $18,100

Taxable income                    $  75,900

Taxes                                     $ 30,360

Net income                          $  45,540

Find the accumulated depreciation for 2014 first.

The accumulated depreciation for 2014 is:_$45,900____(Round to the nearest dollar.)

Explanation:

A company's income statement is one of the three financial statements prepared by the entity at the end of its fiscal period.  The statement compares the company's revenue with the expenses.  After deducting the total expenses from the total revenue, the net income or loss is obtained.  But before arriving at the net income or loss, there are other profit points that are usually calculated.  The first is the gross profit, which is the difference between the sales revenue and the cost of goods sold.  It shows the ability of the management to generate enough revenue to cover the cost of goods sold and make a profit from its trading or primary activities.

The next profit point is the Earnings before Interests and Taxes (EBIT).  This is an important index for checking the financial performance of a company.  The next is the Taxable Income on which the tax rate is determined and paid to government as Company Income Tax.  After deducting the tax expense from the pre-tax income, the final profit point is the After-Tax Income or the Net Income.  This determines the dividends policy and the share of retained earnings of the entity.

eally Great Corporation manufactures industrial−sized landscaping trailers and uses budgeted machine−hours to allocate variable manufacturing overhead. The following information pertains to the​ company's manufacturing overhead​ data: Budgeted output units 51,000 units Budgeted machine−hours 10,200 hours Budgeted variable manufacturing overhead costs for 51,000 units $387,600 Actual output units produced 35,750 units Actual machine−hours used 14,300 hours Actual variable manufacturing overhead costs $328,900 What is the budgeted variable overhead cost rate per output​ unit?

Answers

Answer:

$7.60 per unit of output

Explanation:

Budgeted output units 51,000 units

Budgeted machine−hours 10,200 hours

Budgeted variable manufacturing overhead costs for 51,000 units $387,600

budgeted variable overhead cost per unit of output = $387,600 / 51,000 units = $7.60 per unit of output

In this case, the applied variable overhead rate = 35,750 units x $7.60 = $271,700, which would have been under-applied since the actual variable overhead costs were much higher, $328,900.

How is one product determined to specialize in between the two

Answers

Answer:

Specialization is a method of production whereby an entity focuses on the production of a limited scope of goods to gain a greater degree of efficiency. Many countries, for example, specialize in producing the goods and services that are native to their part of the world, and they trade them for other goods and services.

Mark it as Brainliest  if it helps!!!

Merry Maidens Cleaning generally charges $280 for a detailed cleaning of a normal-size home. However, to generate additional business, Merry Maidens is offering a new-customer discount of 10%. On May 1, Ms. E. Pearson has Merry Maidens clean her house and pays cash equal to the discounted price. Required: Record the revenue earned by Merry Maidens Cleaning on May 1.

Answers

Answer:

May 1

DR Cash $252

CR Service Revenue $252

(To record payment for services rendered)

Working

Cash = Net Service revenue

Net Service revenue = $280 * ( 1 - 10%)

= 280 * 90%

= $252

Corporation has found that ​% of its sales in any given month are credit​ sales, while the remainder are cash sales. Of the credit​ sales, Corporation has experienced the following collection​ pattern: 20% received in the month of the sale 40% received in the month after the sale 24% received two months after the sale 16% of the credit sales are never received November sales for last year were ​, while December sales were . Projected sales for the next three months are as​ follows: January sales. . . . . . . . . . . . . . . . $150,000 February sales. . . . . . . . . . . . . . . $130,000 March sales. . . . . . . . . . . . . . . . . $175,000 Requirement Prepare a cash collections budget for the first​ quarter, with a column for each month and for the quarter. ​(Round your answers to the nearest whole​ dollar.) Sweeney Corporation Cash Collections Budget For the Months of January through March January Cash sales Collections on credit sales: 20% Month of sale 40% Month after 24% Two months after Total cash collections Enter any number in the edit fields and then click Check An

Answers

Answer:

Some information is missing, specifically the % of credit sales. Similar questions use 80%, so I will use that %. Also, November sales were $85,000 and December sales were $115,000.

                              Cash collections budget

                                                January              February             March

Cash sales                               $30,000            $26,000              $35,000

Collection from Nov. sales      $16,320

Collection from Dec. sales     $36,800             $22,080

Collection from Jan. sales      $24,000            $48,000              $28,800

Collection from Feb. sales                                $20,800               $41,600

Collection from March sales                                                          $28,000

Total cash collections            $107,120             $116,880             $133,400

Following are the accounts and balances from the adjusted trial balance of stark company
Notes payable $11,000 Accumulated depreciation building $15,000
Prepaid insurance 2,500 Accounts receivable 4,000
Interest expense 500 Utilities expense 1,300
Accounts payable 1,500 Interest payable 100
Wages payable 400 Unearned revenue 800
Cash 10,000 Supplies expense 200
Wages expense 7,500 Buildings 40,000
Insurance expense 1,800 Dividends 3,000
Common stock 10,000 Depreciation expense—Buildings 2,000
Retained earnings 14,800 Supplies 800
Services revenue 20,000
Prepare the (1) income statement and (2) statement of retained earnings for the year ended December 31 and (3) balance sheet at December 31. The Retained Earnings account balance was $35,600 on December 31 of the prior year.

Answers

Answer:

                                STARK COMPANY  

                             INCOME STATEMENT  

                FOR THE YEAR ENDED DECEMBER 31  

PARTICULARS                                 AMOUNT $

Service Revenue                               20,000

Expenses

Supplies expense          200  

Interest expense            500  

Insurance expense        1,800

Utilities expense            1,300

Depreciation expense   2,000

Wages expense             7,500

Total expenses                                  13,300

Net profit                                            6,700

                            STARK COMPANY  

                 STATEMENT OF RETAINED EARNINGS  

                  FOR THE YEAR ENDED DECEMBER 31

                                                                                       Amount $

Retained earnings December 31 prior year end            14,800

Add- Net income           6,700

Less- Dividends             3,000                                           3,700

Retained earnings, December 31 Current year end     18,500

3.                                          STARK COMPANY  

            BALANCE SHEET FOR THE YEAR ENDED DECEMBER 31

Current Assets

Cash                               10,000

Accounts receivable      4,000  

Office supplies               800  

Prepaid insurance          2,500

Total current asset                           17,300

Non Current Assets

Buildings                            40,000

Less- Accumulated dep.    15,000  

Total Non Current Assets                25,000

Total Assets                                       42,300

Liabilities

Current liabilities

Accounts payable     1,500  

Interest payable        100  

Notes payable           11,000  

Unearned revenue    800  

Wages payable          400

Total Current liabilities                 13,800

Long term liabilities

Common stock      10,000

Retained earnings 18,500             28,500

Total liabilities and capital           42,300

Financial statements are statements that keep a record of the various transactions of the firm. It keeps the records of the inflow and outflow of cash in the company and also maintains the sound wealth in the firm.

The income statement, balance sheet, and calculations have been attached below.

To know more about the financial statements, refer to the link below:

https://brainly.com/question/25631040

All of the following statements regarding convertible bonds are true except:_________.
A. Holders of convertible bonds can generally decide whether to convert to stock.
B. Holders of convertible bonds have the potential to profit from increases in stock price.
C. Holders of convertible bonds can choose when to convert to stock.
D. Holders of convertible bonds have the option to not convert and continue receiving bond interest payments and par value at maturity.
E. Holders of convertible bonds can choose how many shares of stock to receive at conversion.

Answers

Answer: Holders of convertible bonds can choose how many shares of stock to receive at conversion

Explanation:

A convertible bond is a debt security that yields the payment of interest, but can also be converted into equity shares or common stock that are predetermined.

The option that holders of convertible bonds can choose how many shares of stock to receive at conversion is wrong. This is because the number I shares that will be eventually converted will already have been fixed.

Sloan Transmissions inc.,has the following estimates for its new gear assembly project: price=$2,200 per unit., variable cost= $440 per unit., fixed costs = $1.6 million., quantity = 90,000 units. suppose the company believes all of its estimates are accurate only to

Answers

Answer:

Best case

Price 2,640

Variable cost per unit 352

Fixed cost 1.28 million

Quantity 108,000 units

Worst case

Price 1,760

Variable cost per unit 528

Fixed cost 1.92 million

Quantity 72,000 units

Explanation:

Based on the information given in the best case expenses would be 20% lower while the incomes will be 20% higher.

Calculation for the price

Price = 2,200 ×(1+0.20)

Price=2,200×1.2

Price = 2,640

Calculation for Variable cost per unit

Variable cost per unit = 440× (1-0.20)

Variable cost per unit=440×0.80

Variable cost per unit= 352

Calculation for fixed cost

Fixed cost = 1.60 million ×(1-0.20)

Fixed cost=1.60 million× 0.80

Fixed cost= 1.28 million

Calculation for the Quantity

Quantity = 90,000 × (1+0.20)

Quantity =90,000×1.2

Quantity=108,000units

Therefore, Best case will be:

Price 2,640

Variable cost per unit 352

Fixed cost 1.28 million

Quantity 108,000units

Based on the information given in the worst case expenses would be 20% higher while incomes would be 20% lower.

Calculation for the price

Price = 2,200 × (1-0.20) = 1080

Price=2,200 ×0.8

Price=1,760

Calculation for the Variable cost per unit

Variable cost per unit = 440 × (1+0.20)

Variable cost per unit=440× 1.2

Variable cost per unit= 528

Calculation for Fixed cost

Fixed cost = 1.60 million × (1+0.20)

Fixed cost=1.60 million×1.2

Fixed cost= 1.92 million

Calculation for the Quatity

Quantity = 90,000 ×(1-0.20)

Quantity=90,000×0.8

Quantity= 72,000 units

Therefore Worst case will be:

Price 1,760

Variable cost per unit 528

Fixed cost 1.92 million

Quantity 72,000 units

You purchased a stock at a price of $48.98. The stock paid a dividend of $1.63 per share and the stock price at the end of the year was $54.12. What was the total return for the year? Multiple Choice 13.82% 10.49% 13.17% 12.51% 3.33%

Answers

Answer:

13.82%

Explanation:

The computation of total return for the year is shown below:-

Total return = (End value - Beginning value + Dividend) ÷ Beginning value

= ($54.12 - $48.98 + $1.63) ÷ $48.98

= 6.77 ÷ $48.98

= 0.13821

or

= 13.82%

Therefore for computing the total return we simply applied the above formula by considering all the information given in the question

Haruto Kawa, a Japanese citizen who works for Shin-Ro Corp. in Japan, has been asked to head the company's sales office in the United States. Upon taking the assignment, Haruto will be a(n) _____ manager.

Answers

Answer:

The correct answer will be "Expatriate".

Explanation:

An expatriate seems to be a migrant worker through his or her occupation, a specialist, or maybe even a skilled worker. Expatriate managers could've been characterized because of those who aren’t residents including its country during which individuals work, and were employed because of everyone's specialized operational skills but rather because of about there willingness to employ organization knowledge.

Steady​ Company's stock has a beta of . If the​ risk-free rate is and the market risk premium is ​, what is an estimate of Steady​ Company's cost of​ equity?

Answers

The question is incomplete as it misses the figures. The following is the complete question.

Steady Company's stock has a beta of 0.21. If the risk-free rate is 6.2% and the market risk premium is 6.9%, what is an estimate of Steady Company's cost of equity?

Answer:

The cost of equity is 0.07649 or 7.649%

Explanation:

The required rate of return or cost of equity capital is the rate required by the investors to invest in a stock based on the systematic risk of the stock as measure by the beta. The required rate of return or cost of equity can be calculated using the CAPM equation. The CAPM equation is,

r = rRF + Beta * rpM

Where,

rRf is the risk free raterpM is the risk premium on market

r = 0.062 + 0.21 * 0.069

r = 0.07649 or 7.649%

Gold Nest Company of Guandong, China, is a family-owned enterprise that makes birdcages for the South China market. The company sells its birdcages through an extensive network of street vendors who receive commissions on their sales. All of the company's transactions with customers, employees, and suppliers are conducted in cash; there is no credit.

The company uses a job-order costing system in which overhead is applied to jobs on the basis of direct labor cost. Its predetermined overhead rate is based on a cost formula that estimated $76,500 of manufacturing overhead for an estimated activity level of $45,000 direct labor dollars. At the beginning of the year, the inventory balances were as follows:

Raw materials $10,200
Work in process $4,200
Finished goods $8,200
During the year, the following transactions were completed:

a. Raw materials purchased for cash, $170,000.

b. Raw materials requisitioned for use in production, $141,000 (materials costing $121,000 were charged directly to jobs; the remaining materials were indirect).

c. Costs for employee services were incurred as follows: |Direct labor|$156,000

Indirect labor $185,900
Sales commissions $22,000
Administrative salaries $50,000
d. Rent for the year was $18,800 ($13,600 of this amount related to factory operations, and the remainder related to selling and administrative activities).

e.Utility costs incurred in the factory, $16,000.

f.Advertising costs incurred, $13,000.

g. Depreciation recorded on equipment, $21,000. ($15,000 of this amount was on equipment used in factory operations; the remaining $6,000 was on equipment used in selling and administrative activities.)

h. Manufacturing overhead cost was applied to jobs, $?

i.Goods that had cost $226,000 to manufacture according to their job cost sheets were completed.

j. Sales for the year totaled $514,000. The total cost to manufacture these goods according to their job cost sheets was $220,000.

Required:

(Round your intermediate calculations to 2 decimal places)

1. Prepare journal entries to record the transactions for the year.

2. Prepare a journal entry to close any balance in the Manufacturing Overhead account to Cost of Goods Sold.

3. Prepare an income statement for the year.

Answers

Answer:

1)

a. Raw materials purchased for cash, $170,000.

Dr Materials inventory 170,000

   Cr Cash 170,000

b. Raw materials requisitioned for use in production, $141,000 (materials costing $121,000 were charged directly to jobs; the remaining materials were indirect).

Dr Work in process: direct materials 121,000

Dr Manufacturing overhead 20,000

    Cr Materials inventory 141,000

c. Costs for employee services were incurred as follows:

Dr Work in process: direct labor 156,000

Dr Manufacturing overhead 185,900

Dr Sales salaries expense 22,000

Dr Administrative salaries expense 50,000

    Cr Cash 413,900

d. Rent for the year was $18,800 ($13,600 of this amount related to factory operations, and the remainder related to selling)

Dr Manufacturing overhead 13,600

Dr Rent expense 5,200

    Cr Cash 18,800

e.Utility costs incurred in the factory, $16,000.

Dr Manufacturing overhead 16,000

    Cr Cash 16,000

f. Advertising costs incurred, $13,000.

Dr Advertising expenses 13,000

    Cr Cash 13,000

g. Depreciation recorded on equipment, $21,000. ($15,000 of this amount was on equipment used in factory operations; the remaining $6,000 was on equipment used in selling and administrative activities.)

Dr Manufacturing overhead 15,000

Dr Depreciation expense 6,000

    Cr Accumulated depreciation: manufacturing equipment 15,000

    Cr Accumulated depreciation: office equipment 6,000

h. Manufacturing overhead cost was applied to jobs, $?

Dr Work in process 265,200

     Cr Manufacturing overhead 265,200 (170% of direct labor)

i. Goods that had cost $226,000 to manufacture according to their job cost sheets were completed.

Dr Finished goods inventory 226,000

    Cr Work in process 226,000

j. Sales for the year totaled $514,000. The total cost to manufacture these goods according to their job cost sheets was $220,000.

Dr Cash 514,000

    Cr Sales revenue 514,000

Dr Cost of goods sold 220,000

    Cr Finished goods inventory 220,000

2)

Dr Manufacturing overhead ($265,200 - $250,500) 14,700

    Cr Cost of goods sold 14,700

3) Gold Nest Company

Income Statement

Sales revenue                                                                        $514,000

- Cost of goods sold                                                             -$205,300

Gross profit                                                                             $308,700

Operating expenses:

Sales salaries expense -$22,000Administrative salaries expense -$50,000Rent expense -$5,200Advertising expenses -$13,000Depreciation expense -$6,000                                      -$96,200

Operating profit                                                                        $212,500

1. The preparation of journal entries to record the transactions for Gold Nest Company of Guandong, China, is as as follows:

a. Debit Raw materials $170,000

Credit Cash $170,000

b. Debit Work in Process $121,000

Debit Manufacturing Overhead $20,000

Credit Raw materials $141,000

c. Debit Work in Process $156,000

Debit Manufacturing Overhead $185,900

Credit Payroll Expenses $341,900

Debit Selling and Administrative Expenses $22,000

Credit Sales commissions $22,000

Debit Selling and Administrative Expenses $50,000

Credit Administrative salaries $50,000

d. Debit Manufacturing Overhead $13,600

Debit Selling and Administrative Expenses $5,200

Credit Rent Expenses $18,800

e. Debit Manufacturing Overhead $16,000

Credit Utilities Expense $16,000

f. Debit Selling and Administrative Expenses $13,000

Advertising costs $13,000

g. Debit Manufacturing Overhead $15,000

Debit Selling and Administrative Expenses $6,000

Credit Depreciation Expenses $21,000

h. Debit Work in Process $265,200

Credit Manufacturing Overhead (Applied) $265,200 ($1.70 x $156,000)

i. Debit Finished Goods Inventory $226,000

Credit Work in Process $226,000

j. Debit Cash $514,000

Credit Sales Revenue $514,000

j. Debit Cost of goods sold $220,000

Credit Finished Goods Inventory $220,000

2. The journal entry to close the balance in the Manufacturing Overhead account to the Cost of goods sold is as follows:

Debit Manufacturing Overhead $14,700

Credit Cost of goods sold $14,700

3. Gold Nest Company

Income Statement

for the year ended December 31

Sales Revenue            $514,000

Cost of goods sold      205,300

Gross profit               $308,700

Selling and Administrative Expenses:

Sales commission       $22,000

Administrative salaries 50,000

Rent Expenses                5,200

Advertising Expenses   13,000

Depreciation Expenses 6,000

Total selling/admin.  $96,200

Net income             $212,500

Data Calculations:

Estimated manufacturing overhead = $76,500

Estimated direct labor dollars = $45,000

Predetermined overhead rate = $1.70 ($76,500/$45,000)

Beginning inventory balances:

Raw materials = $10,200

Work in process = $4,200

Finished goods = $8,200

Data Analysis:

a. Raw materials $170,000 Cash $170,000

b. Work in Process $121,000 Manufacturing Overhead $20,000 Raw materials $141,000

c. Work in Process $156,000 Manufacturing Overhead $185,900 Payroll Expenses $341,900

Selling and Administrative Expenses $22,000 Sales commissions $22,000

Selling and Administrative Expenses $50,000 Administrative salaries $50,000

d. Manufacturing Overhead $13,600 Selling and Administrative Expenses $5,200 Rent Expenses $18,800

e. Manufacturing Overhead $16,000 Utilities Expense $16,000

f. Selling and Administrative Expenses $13,000 Advertising costs $13,000

g. Manufacturing Overhead $15,000 Selling and Administrative Expenses $6,000 Depreciation Expenses $21,000

h. Work in Process $265,200 Manufacturing Overhead (Applied) $265,200 ($1.70 x $156,000)

i. Finished Goods Inventory $226,000 Work in Process $226,000

j. Cash $514,000 Sales Revenue $514,000

j. Cost of goods sold $220,000 Finished Goods Inventory $220,000

2. Manufacturing Overhead $14,700 Cost of goods sold $14,700

Manufacturing Overhead

b. Raw materials                   $20,000

c. Payroll Expenses            $185,900

d. Rent Expenses                 $13,600

e. Utilities Expense              $16,000

g. Depreciation Expenses  $15,000

h. Work in Process                                 $265,200

Cost of goods sold (Over-applied

overhead)                          $14,700

Cost of goods sold

Finished goods                                   $220,000

Over-applied manufacturing overhead (14,700)

Adjusted cost of goods sold           $205,300

What is a job-order costing system?

A job-order costing system is a costing system that tracks the costs and revenues according to jobs, with jobs allocated job numbers.  It is unlike process costing, which tracks jobs for each process in order to determine the unit costs instead of per job.

Learn more about accounting costs under job-order costing system at https://brainly.com/question/24516871

Other Questions
What artist cut off his ear ____________ a regulatory protein that may bind DNA to inhibit transcription. ____________ a DNA sequence that binds a regulatory protein. ____________a DNA sequence that binds RNA polymerase and regulates transcription. ____________a compound that interacts with another protein or compound to form an active repressor ____________a compound that induces or activates transcription, such as lactose.a. Repressorb. Operator c. Promoterd. Corepressore. Inducer For each situation, give an example of a fiscal policy and a monetary policy solution. (p. 15) 1. Rapid investment during a boom period threatens to overheat the economy.oFiscal policy solution:oMonetary policy solution:o2. Layoffs lead to an economic slowdown.oFiscal policy solution:oMonetary policy solution: Design of experiments is a technique that helps identify which variables have the most influence on the overall outcome of a process. Understanding which variables affect outcome is a very important part of quality planning. A particle moves along line segments from the origin to the points (2, 0, 0), (2, 3, 1), (0, 3, 1), and back to the origin under the influence of the force field F(x, y, z).Required:Find the work done. Which of the following shows the correct solution steps and solution to 7x-4= -18? I know how to do it but right now I'm cooking and have no time please say if the first part is right and the second part will be much appreciated! The cost, C, in United States Dollars ($), of cleaning up x percent of an oil spill along the Gulf Coast of the United States increases tremendously as x approaches 100. One equation for determining the cost (in millions $) is: Hey market sales six cans of food for every seven boxes of food the market sold a total of 26 cans and boxes today how many of each kind did the market sale tell me some of the reasons that it is important to keep a positive attitude in a learning environment. (please answer it's really simple) In circle O, AC and BD are diameters. Circle O is shown. Line segments B D and A C are diameters. A radius is drawn to cut angle C O C into 2 equal angle measures of x. Angles A O C and B O C also have angle measure x. What is mArc A B? Blas and Interpetatlon can influence my perspective as an observer, so I need to do what ? How do I find DG. A. 3 B. -7 c. 16 d. 13 Which one of these relations are functions ?Please helpppp fast Which statement explains how some Zhou rulers used the Mandate of Heaven to misuse their power? A. According to the Mandate of Heaven, kings were considered godlike beings, so they could do as they pleased. B. According to the Mandate of Heaven, a ruler could not maintain law and order without punishing people. C. According to the Mandate of Heaven, the people were required to worship their kings. D. According to the Mandate of Heaven, a king was the highest authority and only his son could succeed him. E. According to the Mandate of Heaven, the people had the right to overthrow an inefficient king. This mammal retains its embryo in its uterus for the full term of the pregnancy. Which mammal is it most likely to be? If R = 20 , what is the equivalent resistance between points A and B in the figure? Find a cubic polynomial with integer coefficients that has $\sqrt[3]{2} + \sqrt[3]{4}$ as a root. Costs that are capitalized because they are expected to have future value are called product costs; costs that are expensed are called period costs. This classification is important because it affects the amount of costs expensed in the income statement and the amount of costs assigned to inventory on the balance sheet. Product costs are commonly made up of direct materials, direct labor, and overhead. Period costs include selling and administrative expenses.A service company has which of the following costsa. Direct Materialb. Overhead Costsc. Product Costsd. Expensed in the period incurred A machine used to fill gallon-sized paint cans is regulated so that the amount of paint dispensed has a mean of ounces and a standard deviation of ounce. You randomly select cans and carefully measure the contents. The sample mean of the cans is ounces. Does the machine need to be reset? Explain your reasoning. Yes No , it is very unlikely likely that you would have randomly sampled cans with a mean equal to ounces, because it lies does not lie within the range of a usual event, namely within 1 standard deviation 2 standard deviations 3 standard deviations of the mean of the sample means.