Answer: 351.19K
Explanation: This is a case were the combined gas equation can be applied.
Combined gas equation is given as; P1V1/T1 = P2V2/T2,
where P1 = Initial pressure = 2.50 atm
P2= Final pressure = 7.50 atm
V1 = Initial volume = 3.50L
V2 = Final Volume = 1.50L
T1 = Initial Temperature = 273.15K
T2 = Final Temperature = ?
∴ 2.50atm x 3.50L / 273.15K = 7.50atm x 1.50L / T2
Making T2 the subject of Formular; we then have;
T2 = P2 V2 T1 / P1 V1 = 7.50atm x 1.50L x 273.15K / 2.50atm x 3.50L
= 3072.94 / 8.75 = 351.19K
The change in temperature (T2) is 351.19K.
How to make isopropyl alcohol
Answer:
.It is easily synthesized from the reaction of propylene with sulfuric acid, followed by hydrolysis. Isopropyl alcohol (2-propanol) is made by indirect hydration of propylene (CH2CHCH3).… In some cases the hydration of propylene is carried out in one step, using water and a catalyst at high pressure.
Hope it'll help!
stay safe:)
What is the total oxidation state of the fluorine atoms
Answer:
-1
Explanation:
Two liquids, A and B, have equal masses and equal initial temperatures. Each is heated for the same length of time over identical burners. Afterward, liquid A is hotter than liquid B. Which has the larger specific heat? Two liquids, A and B, have equal masses and equal initial temperatures. Each is heated for the same length of time over identical burners. Afterward, liquid A is hotter than liquid B. Which has the larger specific heat? Liquid A. There's not enough information to tell. Liquid B.
Answer:
Liquid A.
Explanation:
Specific heat is defined as the amount of heat required per unit of mass to raise the temperature by one degree celsius.
When two liquids are heated, the liquid with larger specific heat is the one which is hotter. That is because is required more energy to decrease its temperature by 1°C.
Thus, in the problem, liquid A has the larger specific heat
1. A 99.8 mL sample of a solution that is 12.0% KI by mass (d: 1.093 g/mL) is added to 96.7 mL of another solution that is 14.0% Pb(NO3)2 by mass (d: 1.134 g/mL). How many grams of PbI2 should form?
Pb(NO3)2(aq) + 2 KI(aq) PbI2(s) + 2 KNO3(aq)
Answer:
[tex]m_{PbI_2}=18.2gPbI_2[/tex]
Explanation:
Hello,
In this case, we write the reaction again:
[tex]Pb(NO_3)_2(aq) + 2 KI(aq)\rightarrow PbI_2(s) + 2 KNO_3(aq)[/tex]
In such a way, the first thing we do is to compute the reacting moles of lead (II) nitrate and potassium iodide, by using the concentration, volumes, densities and molar masses, 331.2 g/mol and 166.0 g/mol respectively:
[tex]n_{Pb(NO_3)_2}=\frac{0.14gPb(NO_3)_2}{1g\ sln}*\frac{1molPb(NO_3)_2}{331.2gPb(NO_3)_2} *\frac{1.134g\ sln}{1mL\ sln} *96.7mL\ sln\\\\n_{Pb(NO_3)_2}=0.04635molPb(NO_3)_2\\\\n_{KI}=\frac{0.12gKI}{1g\ sln}*\frac{1molKI}{166.0gKI} *\frac{1.093g\ sln}{1mL\ sln} *99.8mL\ sln\\\\n_{KI}=0.07885molKI[/tex]
Next, as lead (II) nitrate and potassium iodide are in a 1:2 molar ratio, 0.04635 mol of lead (II) nitrate will completely react with the following moles of potassium nitrate:
[tex]0.04635molPb(NO_3)_2*\frac{2molKI}{1molPb(NO_3)_2} =0.0927molKI[/tex]
But we only have 0.07885 moles, for that reason KI is the limiting reactant, so we compute the yielded grams of lead (II) iodide, whose molar mass is 461.01 g/mol, by using their 2:1 molar ratio:
[tex]m_{PbI_2}=0.07885molKI*\frac{1molPbI_2}{2molKI} *\frac{461.01gPbI_2}{1molPbI_2} \\\\m_{PbI_2}=18.2gPbI_2[/tex]
Best regards.
When Mrs. Green describes the physical properties of matter she said that physical properties often concern changes in state, One
physical property that does not describe a change in state is
A)
density
B)
evaporation
C)
freezing
D)
melting
Answer:
density
Explanation:
Density is an important measurement. It has an unit: g/mL or kg/L, ...
Evaporation, freezing, melting are the processes in which the substances change their states. Other processes are: condensation, sublimation, deposition.
...
Hope this answer can help you. Have a nice day!
How do you calculate the number of protons, neutrons, and electrons in an element?
Answer:
The first thing you will need to do is find some information about your element. Go to the Periodic Table of Elements and click on your element. If it makes things easier, you can select your element from an alphabetical listing.
Number of Protons = Atomic Number
Number of Electrons = Number of Protons = Atomic Number
Number of Neutrons = Mass Number - Atomic Number
For krypton:
Number of Protons = Atomic Number = 36
Number of Electrons = Number of Protons = Atomic Number = 36
Number of Neutrons = Mass Number - Atomic Number = 84 - 36 = 48
Explanation:
hope this helps, have a good day :-)
g A chemistry student needs of thiophene for an experiment. She has available of a w/w solution of thiophene in benzene. Calculate the mass of solution the student should use. If there's not enough solution, press the "No solution" button. Round your answer to significant digits.
The given question is not complete, the complete question is:
A chemistry student needs 5.00 g of thiophene for an experiment. She has available 0.50 kg of a 28.7% w/w solution of thiophene in benzene, Calculate the mass of solution the student should use. If there's not enough solution, press the "No solution" button Be sure your answer has the correct number of significant digits. X
Answer:
The correct answer is 17.4 grams.
Explanation:
As mentioned in the given question, 28.7 percent w/w solution thiophene in benzene shows that,
(wt. of thiophene / wt. of thiopene + benzene) * 100 = 28.7
0.50 kg of the solution indicates that it is 500 grams of the solution.
Therefore, the amount of thiophene found in the 500 grams of the solution is,
500 g * 28.7 / 100 = 143.5 gm
Thus, 143.5 grams of thiophene is found 500 grams of the solution.
Now, 1 gram of thiophene will be in 500/143.5 of solution.
Therefore, 5 grams of thiophene will be in 500/143.5 * 5 g of the solution = 17.42 grams of the solution.
Hence, the mass of the solution to be used by the student in the given case will be 17.4 grams.
What is the hydronium ion concentration of a 0.100 M acetic acid solution with Ka = 1.8 × 10-5? The equation for the dissociation of acetic acid is: CH3CO2H(aq) + H2O(l) ⇌ H3O+(aq) + CH3CO2-(aq) What is the hydronium ion concentration of a 0.100 M acetic acid solution with Ka = 1.8 × 10-5? The equation for the dissociation of acetic acid is: CH3CO2H(aq) + H2O(l) ⇌ H3O+(aq) + CH3CO2-(aq) 1.3 × 10-2 M 4.2 × 10-2 M 1.3 × 10-3 M 4.2 × 10-3 M
Answer:
1.3×10⁻³ M
Explanation:
Hello,
In this case, given the dissociation reaction of acetic acid:
[tex]CH_3CO_2H(aq) + H_2O(l) \rightleftharpoons H_3O^+(aq) + CH_3CO_2^-(aq)[/tex]
We can write the law of mass action for it:
[tex]Ka=\frac{[H_3O^+][CH_3CO_2^-]}{[CH_3CO_2H]}[/tex]
Of course, excluding the water as heterogeneous substances are not included. Then, in terms of the change [tex]x[/tex] due to the dissociation extent, we are able to rewrite it as shown below:
[tex]1.8x10^{-5}=\frac{x*x}{0.100-x}[/tex]
Thus, via the quadratic equation or solve, we obtain the following solutions:
[tex]x_1=-0.00135M\\x_2=0.00133M[/tex]
Obviously, the solution is 0.00133M which match with the hydronium concentration, thus, answer is: 1.3×10⁻³ M in scientific notation.
Regards.
Answer:
1.3×10^-3 M
Explanation:
Step 1:
Data obtained from the question:
Equilibrium constant (Ka) = 1.8×10^-5
Concentration of acetic acid, [CH3COOH] = 0.100 M
Concentration of hydronium ion, [H3O+] =..?
Step 2:
The balanced equation for the reaction.
CH3CO2H(aq) + H2O(l) ⇌ H3O+(aq) + CH3CO2-(aq)
Step 3:
Determination of concentration of hydronium ion, [H3O+].
This can be obtained as follow:
Ka = [H3O+] [CH3CO2-] / [CH3CO2H]
Initial concentration:
[CH3COOH] = 0.100 M
[H3O+] = 0
[CH3CO2-] = 0
During reaction
[CH3COOH] = – y
[H3O+] = +y
[CH3CO2-] = +y
Equilibrium:
[CH3COOH] = 0.1 – y
[H3O+] = y
[CH3CO2-] = y
Ka = [H3O+] [CH3CO2-] / [CH3CO2H]
1.8×10^-5 = y × y / 0.1
Cross multiply
y^2 = 1.8×10^-5 x 0.1
Take the square root of both side
y = √(1.8×10^-5 x 0.1)
y = 1.3×10^-3 M
[H3O+] = y = 1.3×10^-3 M
Therefore, the concentration of the hydronium ion, [H3O+] is 1.3×10^-3 M
A 125 g sample of strontium was heated from 0°C to 20°C. It absorbed 750 J of energy. What is the specific heat capacity of iron?
Answer:
Specific heat capacity of iron (C) = 0.3 J/GK
Explanation:
Given:
Mass of sample (m) = 125 gram
Change in heat (ΔT) = 20°C - 0°C = 20°C
Absorbed energy (ΔE) = 750 J
Find:
Specific heat capacity of iron (C) = ?
Computation:
⇒ Specific heat capacity of iron (C) = ΔE / [mΔT]
⇒ Specific heat capacity of iron (C) = 750 / [125 × 20]
⇒ Specific heat capacity of iron (C) = 750 / [2,500]
⇒ Specific heat capacity of iron (C) = 0.3 J/GK
Answer:
Specific heat capacity of iron (C) [tex]= 0.3[/tex] J/g°C
Explanation:
As we know that
Specific heat capacity of iron (C) [tex]=\frac{\delta E}{ [m* \delta T]}[/tex]
Where [tex]\delta E[/tex] represents the change in the energy
m represents the mass of the sample and
[tex]\delta T[/tex] represents the change in temperature.
Given:
Mass of sample (m) [tex]= 125[/tex] gram
Change in heat ([tex]\delta T[/tex] ) [tex]20 - 0 = 20[/tex]
Absorbed energy ([tex]\delta E[/tex])[tex]= 750[/tex] J
Substituting the given values in above equation, we get -
Specific heat capacity of iron (C)
[tex]= \frac{750}{125*20}[/tex]
Specific heat capacity of iron (C) [tex]= 0.3[/tex] J/g°C
Question 13: Consider the strength of the Hβ absorption line in the spectra of stars of various surface temperatures. This is the amount of light that is missing from the spectra because Hydrogen electrons have absorbed the photons and jumped from level 2 to level 4. How do you think the strength of Hβ absorption varies with stellar surface temperature?
Answer:
The absorption and strength of the H-beta lines change with the temperature of the stellar surface, and because of this, one can find the temperature of the star from their absorption lines and strength. To better comprehend, let us look into the concept of the atom's atomic structure.
Atoms possess distinct energy levels and these levels of energy are constant, that is, the temperature has no influence on it. However, temperature possesses an influence on the electron numbers found within these levels of energy. Therefore, to generate an absorption line of hydrogen in the electromagnetic spectrum's visible band, the electrons are required to be present in the second energy level, that is when it captivates a photon.
Therefore, after captivating the photons the electrons jump from level 2 to level 4, which shows that there is an increase in the stellar surface temperature and at the same time one can witness a decline in the strength of the H-beta lines. In case, if the temperature of the surface increases too much, then one will witness no attachment of electron with the hydrogen atom and thus no H lines, and if the temperature of the surface becomes too low, then the electrons will stay in the ground state and no formation of H lines will take place in that condition too.
Hence, to generate a very robust H line, after captivating photons the majority of the electrons are required to stay in the second energy level.
6. Bacteriorhodopsin is an integral membrane protein that uses solar energy (absorbed by its retinal chromophore) to pump protons out of the cell against an electrochemical gradient. Re-entry of the protons into the cell (down the gradient through its ATPase) is then used to drive the synthesis of ATP from ADP and Pi. Consider the following conditions: intracellular pH is 9.4 and extracellular pH is 6.4, and there is a transmembrane electrical gradient of 120 mV (negative inside). The concentration of intracellular [ATP] = 1 mM, [ADP] = 50 µM, and [Pi] = 2 mM, and G° for ATP hydrolysis is -30.5 kJ/mol. Temperature is 27 °C. a. What is the energy cost of pumping one mole of H+ out of the cell? b. What is the minimal number of H+ that must re-enter the cell through the ATPase to provide sufficient energy to synthesize each ATP? Explain how you arrived at this answer quantitatively, of course.
Answer:
Explanation:
Hello!
a)
You have an integral membrane protein (Bacteriorhodopsin) that uses solar energy to pump protons out of the cell against its electrochemical gradient.
To calculate the energy needed by the protein to pump one molecule out of the cell you need to apply the free energy difference equation for a charged molecule:
ΔG= 2.303RTlog₁₀[tex](\frac{[H^+]out}{[H^+]in})[/tex]+zFΔV
Where
ΔG= free energy difference per molecule transferred from the inside to the outside
R= gas constant 8.315*10⁻³ kJ/mol
T= Temperature in Kelvin (273.15 + TºC)
z= Valency of the ion (ej Na⁺ is z= +1 and Cl⁻ is z= -1)
F= Faraday constant 96.5 kJ/V*mol
ΔV= membrane potential (Volts)
The information you have is:
Intracellular pH= 9.4
Extracellular pH= 6.4
ΔV= 120 mV
Temperature 27ºC
Using the values of pH you can calculate the intracellular and extracellular proton concentrations:
Remember the pH of a solution is calculated as pH=-log[H⁺] so if you reverse the logarithm, you'll find the concentration of protons:
b= logₐ C ⇒ C= aᵇ
[H⁺]intracelular= 10⁻⁹'⁴
[H⁺]extracelular= 10⁻⁶'⁴
Now you need to match the units of the temperature and electrical gradient to the ones in the equation:
The temperature needs to ve in Kelvin: T= 273.15 + 27ºC= 300.15K
The electrical gradients need to be in Volts: ΔV= 120 mV= 0.12V
Now you can replace the data in the formula and calculate how much energy is needed to pump one proton outside the cell:
ΔG= 2.303RTlog₁₀[tex](\frac{[H^+]out}{[H^+]in})[/tex]+zFΔV= 2.303*( 8.315*10⁻³ kJ/mol)*300.15K*log[tex](\frac{10^{-6.4}}{ 10^{-9.4}} )[/tex]+(+1)*96.5 kJ/V*mol*0.12V= 28.82 kJ/mol
It costs 28.82 kJ/mol to pump one mole of H⁺ outside the cell.
b)
To synthesize one molecule of ATP the ATP synthase uses the electrical gradient produced by the spontaneous pass of protons through the membrane. This process is called the proton-motive force.
The ATP synthase consists of two subunits F₀ and F₁ with a rotational motor mechanism that allows it to produce and release ATP.
F₁ has the subunits α, β, σ, γ, ε in charge of synthesizing ATP
F₀ is a proton pore, made of 3 subunits a, b and c. 6 subunits c make up the transmembrane ring in charge of rotation, this ring is connected to the subunits γ and ε. Each time a proton passes, it makes the ring rotate which makes the subunits γ rotate.
Each time the subunit γ rotates 360º, 3 ATP molecules are synthesized and freed. A full rotation of γ means that the c-ring also made a full rotation (for this you need one proton per subunit)
If the ring has 6 c-subunits and, then each ATP molecule needs 6/3= 2 protons to need to pass for each ATP molecule.
I hope this helps!
Silver (1) oxide → silver + oxygen gas
Answer: come on lets link can do what i do
please do this guys i need a lot of help please!
Answer:
the European countries grew together.
Explanation:
Europe saw human inflows from east and southeast.
the Roman Empire came to dominate the entire Mediterranean basin.
European politics from 1947 to 1989 made the European countries grew together.
A container is filled with 10 mol of gas and the pressure (Pi) is measured. If 5 mol are removed, what is the new pressure (Pf)?
Answer:
1/2 of the Pi
Explanation:
PV = nRT
we are going to assume the only things changing are pressure and number of mols, so we change the formula and substitute the variables to make it what we are looking for
[tex]\frac{Pi}{ni} = \frac{Pf}{nf}[/tex]
then we will assume Pi as 1 as it is not given, so we can state it easier
[tex]\frac{1atm}{10mol} = \frac{xatm}{5mol}[/tex]
then either cross multiply or just work it out to be
[tex]\frac{1}{2}[/tex] which we can say as "half of the initial pressure" as no number is given for initial pressure
Claims • Evidence • Reasoning Make
a claim about ways people can stay safe
during storms with high wind and heavy
rains. Summarize evidence to support the
claim and explain your reasoning.
Answer:
the claim is that when people avoid storms they hide in any secret place in there house
Explanation:
when people do that they don't even have to worry about a single thing that will happen to them
SCIENCE QUESTION:
The picture below shows a satellite image of Earth from outer space.What is labeled “White” on the satellite image of Earth?
A. gas in Earth's atmosphere, which keeps Earth's temperature moderate, cycles fluids, and prevents most objects from impacting Earth's surface
B. gravity, which holds all living organisms to Earth, pulls water from clouds, and keeps Earth circulating around the Sun
C. a magnetic field, which controls the movement of water in Earth's water cycle
D. atmospheric ice crystals, which never melt and keep Earth's temperature coo
Answer:
C
Explanation:
The reflection if sunlight on the water makes the water look silver,gray,white
It takes 300 N to move a box 10 meters in 10 seconds. How much power is
required?
A. 30,000 W
B. 100 W
C. 3,000 J
D. 300 W
Plz help
Answer:
Power, P = 300 W
Explanation:
We have,
Force acting on the box to take it is 300 N
It is moved to a distance of 10 m in 10 seconds
It is required to find the power required to move the box. The rate at which work is done is called power required by an object. It can be given by the formula as follows :
[tex]P=\dfrac{W}{t}\\\\P=\dfrac{Fd}{t}\\\\P=\dfrac{300\times 10}{10}\\\\P=300\ W[/tex]
So, the power required is 300 W.
Which of the following are peninsulas in Southeast Asia?
A.
the Miramar Peninsula and the Tasmanian Peninsula
B.
the Indochinese Peninsula and the Malay Peninsula
C.
the Philippine Peninsula and the Vietnam Peninsula
D.
the Irrawaddy Peninsula and the Mekong Peninsula
Answer:
B.
Explanation:
Answer:
B
Explanation:
Dysphagia is the name of a disorder that disrupts
А
the swallowing reflex
B
the absorption of essential nutrients
acid levels in the stomach
C
D
the stomach lining
Answer:
A. The Swallowing reflex
Explanation:
Dysphagia Is a a condition that makes swallowing difficult.
What is the molarity of sodium hydroxide solution made by combining 2.0 L of 0.60
NaOH With 495 mL 3.0 M NaOH? Assume the volumes of the two solutions to be additive___M
Answer:
[tex]M=1.1M[/tex]
Explanation:
Hello,
In this case, since we are mixing two NaOH solutions, the first step is to compute the total moles once the mixing is done, by using the volumes and concentrations of each solutions and subsequently adding them:
[tex]n_T=2.0L*0.60\frac{mol}{L}+495mL*\frac{1L}{1000mL}*3.0\frac{mol}{L}= 2.7molNaOH[/tex]
Next, we compute the total volume by adding the volume of each solution:
[tex]V_T=2.0L+495mL*\frac{1L}{1000mL}= 2.495L[/tex]
Finally, we compute the molarity of the resulting solution by the division between the total moles and the total volume:
[tex]M=\frac{2.7mol}{2.495L}\\ \\M=1.1M[/tex]
Best regards.
What is the symbol for the entity that has 17 protons, 20 neutrons, and 18 electrons?
hEy!!!
Chlorine(CL) is the symbol for the entity that has 17 protons,20 neutrons and 18 electrons.
Hope it will be helpful to you...
Answer:chlorine
Explanation:
6.) (5 points) Assume you have a system with a fixed pH of 4.0. It is well buffered and therefore the pH will not change. What is the predominant state of a molecule with a dissociable proton with a pKa of 5.2 if it is introduced to that system (protonated or deprotonated)
Answer:
Dissociated state is the predominant one
Explanation:
When a molecule with pKa of 4.52 is in an aqueous solution at pH = 4.0, follows the H-H equation, thus:
pH = pKa + log₁₀ [A⁻] / [HA]
Where [A⁻] is the dissociated state and [HA] represents the protonated state
Replacing:
4.0 = 5.2 + log₁₀ [A⁻] / [HA]
-1.2 = log₁₀ [A⁻] / [HA]
0.063 = [A⁻] / [HA]
[HA] = 16 [A⁻]
That means you have 16 times more [HA] than [A⁻] and the dissociated state is the predominant one
When you add a controlled amount of substance known as an impurity to a pure semiconductor, its conductivity increases. This process is known as doping. The addition of an impurity can increase or decrease the number of available electrons. If the number of electrons is increased, the extra electrons conduct electricity. If the number of electrons is decreased, a vacant hole is created. The adjacent electron enters the vacant hole and conducts electricity. Thus, it seems like the holes act as charge carriers. They are considered to be positive charge carriers. Depending upon the charge carriers that conduct electricity, there are two types of semiconductors: p-type semiconductors and n-type semiconductors.Which of the following statements are correct with respect to semiconductors?
a) The addition of group 3A elements to group 4A semiconductors decreases the conductivity of the group 4A semiconductors.
b) The conductivity of semiconductors can be increased by the doping process.
c) As the temperature increases, the conductivity of semiconductors decreases.
d) The addition of group 5A elements to group 4A semiconductors increases the conductivity of the group 4A semiconductors.
e) Holes are charge carriers in p-type semiconductors.
f) Electrons are charge carriers in n-type semiconductors.
Answer:
See explaination
Explanation:
1. The addition of group 3A elements to group 4A semiconductors decreases the conductivity of the group 4A semiconductors: Wrong
The addition of 3A group elements inreases the conductivity and make them extrinsic semiconductors( p-type)
2. The conductivity of semiconductors can be increased by the doping process.: Correct
3.As the temperature increases, the conductivity of semiconductors decreases.. wrong
As the temperature increases, the conductivity of semiconductors increases.
4. The addition of group 5A elements to group 4A semiconductors increases the conductivity of the group 4A semiconductors: Correct : They will create n-type semicoductor.
5.Holes are charge carriers in p-type semiconductors: Correct
6. Electrons are charge carriers in n-type semiconductors: Correct
.The pH is 3. What is [H+]? *
1 point
0.001
0.01
100
1000
Answer:
0.001 M
Explanation:
The pH scale is used to determine the acidity or basicity of a solution.
If pH < 7, the solution is acid.If pH = 7, the solution is neutral.If pH > 7, the solution is basic.The pH is related to the concentration of hydrogen ions through the following expression.
pH = -log [H⁺]
[H⁺] = antilog -pH = antilog - 3 = 0.001 M
I'll give you 100 points
Which are evidence of seafloor spreading? Select three options. A.molten material B.magnetic stripes C.continent material D.drilled core samples E.ocean water samples
At constant temperature and moles, what happens to the pressure of a gas
as the volume of that gas increases? *
Answer:
Avagadro's Law- Gives the relationship between volume and amount of gas in moles when pressure and temperature are held constant. If the amount of gas in a container is increased, the volume increases. ... This means more impacts on the walls of the container and an increase in the pressure.
Explanation:
If I add 50 mls of water to 300 mls of 0.6M KNO3 solution, what will be the molarity of the diluted solution?
Answer:
[tex]M_2=0.51M[/tex]
Explanation:
Hello,
In this case, for this dilution process, we understand that the moles of the solute (potassium nitrate) remain unchanged upon the addition of diluting water. However, the resulting or final volume includes the added water as shown below:
[tex]V_2=300mL+50mL=350mL[/tex]
In such a way, we are able to relate the solution before and after the dilution by:
[tex]V_1M_1=V_2M_2[/tex]
Hence, we solve for the final molarity as:
[tex]M_2=\frac{M_1V_1}{V_2}=\frac{0.6M*300mL}{350mL}[/tex]
Best regards.
[tex]M_2=0.51M[/tex]
What is science? Answer for brainilest
Answer:
The importance of learning is that it helps the individual to acquire the necessary skills through learning and knowledge so that he can achieve his set goals. An important fact about learning is that it is a means to improve knowledge and gain skills that will help in reaching specific goals
Explanation:
The importance of learning is that it helps the individual to acquire the necessary skills through learning and knowledge so that he can achieve his set goals. An important fact about learning is that it is a means to improve knowledge and gain skills that will help in reaching specific goals
Please answers only , 100 pts and brainliest, wrong answers will be reported.
What is the molarity of 9.8 gram Sulfuric Acid in 500 mL of water?
Answer:
.2mol/L
Explanation:
Answer:
2mol/l
Explanation:
Which factor would slow down a chemical reaction? (Choose all that apply)
A)Adding an inhibitor
B)Decreasing temperature
C)Decreasing particle size
D)Increasing particle size
Answer:
(decreasing particle size) C
Explanation: That is one of the answers, if there are more I am sorry.
