ow Pass Filter Design 0.0/5.0 points (graded) Determine the transfer function H(s) for a low pass filter with the following characteristics: a cutoff frequency of 100 kHz a stopband attenuation rate of 40 dB/decade. a nominal passband gain of 20 dB, which drops to 14 dB at the cutoff frequency Write the formula for H(s) that satisfies these requirements:

Answer:

H(s) = 20 / [ 1 + s / 10^5 ]^2

Explanation:

Given data:

cutoff frequency = 100 kHz

stopband attenuation rate = 40 dB/decade

nominal passband gain = 20 dB

new nominal passband gain at cutoff = 14 dB

Represent the transfer function H(s)

The attenuation rate show that there are two(2) poles

H(s) = k / [ 1 + s/Wc ]^2  ----- ( 1 )

where : Wc = 100 kHz = 10^5 Hz , K = 20 log k = 20 dB ∴ k = 20

Input values into equation 1

H(s) = 20 / [ 1 + s / 10^5 ]^2

A flow inside a centrifuge can be approximated by a combination of a central cylinder and a radial line source flow, giving the following potential function:
Ø= a2/r -cosØ + aßlnr = r
Where a is the radius of the central base of the centrifuge and ß is a constant.
a) Provide expressions for the velocities Vr and vo .
b) Find the expression for the stream function.

An ideal neon sign transformer provides 9130 V at 51.0 mA with an input voltage of 240 V. Calculate the transformer's input power and current.

Do you know who Candice is

Draw a sinusoidal signal and illustrate how quantization and sampling is handled by
using relevant grids.