Our five senses can help us to recognize some of the physical properties of matter.

True
False

Answers

Answer 1

True is the correct answer. Our five senses helps us to perceive physical properties of matter


Related Questions

C. A sample may contain any or all of the following ions Hg2 2, Ba 2, and Al 3. 1) No precipitate forms when an aqueous solution of NaCl was added to the sample solution. 2) No precipitate forms when an aqueous solution of Na2SO4 was added to the sample. 3) A precipitate forms when the sample solution was made basic with NaOH. Which ion or ions were present. Write the net ionic equation(s) for the the reaction (s).

Answers

Answer:

Al^3+

Explanation:

Solubility rules tell us what substances are soluble in water. Since NaCl was added and no precipitate was observed, the mercury II ion is absent.

Addition of Na2SO4 does not form a precipitate meaning that Ba^2+ is absent.

If a precipitate is formed when NaOH is added, the the ionic reaction is as follows;

Al^3+(aq) + 3 OH^-(aq) ------> Al(OH)3(s)

DATA SHEET p 45. TRIAL 1 TRIAL 2 1. Mass of the ground pretzel 1.00 gram 1.03 g 2. Initial volume of the AgNO3 solution 0.00 mL 9.10 mL 3. Final volume of the AgNO3 solution 9.10 mL 17.25 mL 4. Volume of AgNO3 solution used 9.10 mL 8.15 mL Line 3 – Line 2 5. Volume of AgNO3 solution in liters _____ L _____ L 6. Molarity of AgNO3 solution 0.01 M 0.01 M (given) 7. Number of moles of AgNO3 ______ mol _____ mol (Line 5 × Line 6) 8. Number of mol of NaCl present in pretzel ______ mol _____ mol (Line 7) number of mol NaCl = number of mol AgNO3 9. Mass of NaCl present in the titrated sample ______ gram _____ gram (Line 8) × 58.5 g/mol

Answers

Answer:

1. 1.00 gm

2. 50 ml

3. 38.93 ml

4. 11.07 ml

5. 0.01107 L

6. 0.010 moles / L

7. 0.0001107 moles

8. 0.0001107 moles

9. 0.00647042 grams

Explanation:

Silver nitrate can react with various compounds to form different products. The weight of products may be different from the original solution introduced due to combustion reaction, as heat energy is released during the chemical process.

2. 27.8 mL of an unknown were added to a 50.0-mL flask that weighs 464.7 g. The total mass of the flask and the liquid is 552.4 g. Calculate the density of the liquid in Lbs/ in3.

Answers

Answer:

[tex]d=4.24x10^{-4}\frac{lb}{in^3}[/tex]

Explanation:

Hello there!

In this case, according to the given information, it turns out firstly necessary for us to set the equation for the calculation of density and mass divided by volume:

[tex]d=\frac{m}{V}[/tex]

Thus, we can find the mass of the unknown by subtracting the total mass of the liquid to the mass of the flask and the liquid:

[tex]m=552.4g-464.7g=87.7g[/tex]

So that we are now able to calculate the density in g/mL first:

[tex]d=\frac{87.7g}{27.8mL}=3.15g/mL[/tex]

Now, we proceed to the conversion to lb/in³ by using the following setup:

[tex]d=3.15\frac{g}{mL}*\frac{1lb}{453.6g}*\frac{1in^3}{16.3871mL}\\\\d=4.24x10^{-4}\frac{lb}{in^3}[/tex]

Regards!

For a gas sample containing equimolar amounts of carbon monoxideand heliumat 300 K, heliumhas _____________average speed and _____________ average kinetic energy compared tocarbon monoxidegas.a.a lower; the same b. the same; the same c. a higher; the same d. a higher; higher

Answers

Answer:

Option C (a higher; the same) is the appropriate response.

Explanation:

Given:

Temperature,

T = 300 K (both [tex]N_2[/tex] and [tex]H_2[/tex])

As we know,

Average speed of a molecule,

⇒ [tex]\bar v=\sqrt{\frac{8RT}{\pi M} }[/tex]

Thus, the average speed of [tex]N_2[/tex] will be lower as its molar mass is greater than [tex]H_2[/tex].

Now,

⇒ [tex]Average \ kinetic \ energy = \frac{3}{2} \ KT[/tex] (not depend on molar mass)

Hence, it will be the same.

The other three alternatives aren't connected to the scenario given. So the above is the correct answer.

When butane reacts with Br2 in the presence of Cl2, both brominated and chlorinated products are obtained. Under such conditions, the usual selectivity of bromination is not observed. In other words, the ratio of 2-bromobutane to 1-bromobutane is very similar to the ratio of 2-chlorobutane to 1-chlorobutane. Can you offer and explanation as to why we do not observe the normal selectivity expected for bromination

Answers

Answer:

Bromine radical formation is carried out in the presence of Br₂ and Cl₂ causing the normal selectivity not to be observed ( this causes the difference in activation energy to be reduced )

Explanation:

Why the normal selectivity expected for bromination is not observed

On the basis of selectivity and applying the Arrhenius equation the greater the difference between the activation energies the more the selectivity.

as seen in the formation of primary and secondary radicals in the Bromine radical formation. this difference is caused mainly by the propagation step ( exothermic ) . But the main reason why the the usual selectivity of bromination is not observed is because it Bromine radical formation is carried out in the presence of Br₂ and Cl₂ ( this causes the difference in activation energy to be reduced )

Which statement is true with respect to standard reduction potentials?
SRP values that are greater than zero always represent a reduction reaction.
SRP values that are less than zero always represent a reduction reaction.
Half-reactions with SRP values greater than zero are spontaneous.
Half-reactions with SRP values greater than zero are nonspontaneous.

Answers

Answer:

C). Half-reactions with SRP values greater than zero are spontaneous.

Explanation:

SRPs or Standard Reduction Potentials are characterized as the ability of a probable distinction among the anode and cathode of a usual/standard cell. It aims to examine the capacity of chemicals to reduce themselves.

The third statement asserts a true claim regarding the SRPs(Standard Reduction Potentials) that the 'half-reactions which take place with the SRP possesses the values higher than zero and they are unconstrained.' The other statements are incorrect as they either show the estimation of SRPs more than 0 or display them as being restricted. Thus, option C is the correct answer.

explain in brief how some bacteria cause tooth cavities​

Answers

Answer:

because some bacteria change the ph of the teeth and leads to tooth cavitiew

The cause of cavities is acid from bacteria dissolving the hard tissues of the teeth (enamel, dentin and cementum). The acid is produced by the bacteria when they break down food debris or sugar on the tooth surface.

2.50 L of 0.700 M phosphoric acid reacts with 5.25 moles of sodium hydroxide. How many moles of hydrogen ions will completely neutralize the moles of hydroxide ions present in this amount of sodium hydroxide? a) 0.583 b) 1.75 c) 3.00 d) 15.75 e) 5.25

Answers

Answer:

5.25 moles of protons. Option e

Explanation:

Reaction between phosphoric acid and sodium hydroxide is neutralization.

We can also say, we have an acid base equilibrium right here:

H₃PO₄  +  3NaOH →  Na₃PO₄  +  3H₂O

Initially we have 5.25 moles of base.

We have data from the acid, to state its moles:

M = mol/L, so mol = M . L

mol = 1.75 moles of acid

If we think in the acid we know:

H₃PO₄  →  3H⁺  +  PO₄⁻³

We know that 1 mol of acid can give 3 moles of protons (hydrogen ions)

If we have 1.75 moles of acid, we may have

(1.75 . 3) /1 = 5.25 moles of protons

These moles will be neutralized by the 5.25 moles of base

H₃O⁺  +  OH⁻  ⇄  2H₂O     Kw

In a titration of a weak acid and a strong base, we have a basic pH

g A high altitude balloon is filled with 1.41 x 104 L of hydrogen gas (H2) at a temperature of 21oC and a pressure of 745 torr. What is the volume of the balloon at a height of 20 km, where the temperature is -48oC and the pressure is 63.1 torr

Answers

Answer:

1.27 × 10⁵ L

Explanation:

Step 1: Given data

Initial pressure (P₁): 745 TorrInitial volume (V₁): 1.41 × 10⁴ LInital temperature (T₁): 21 °CFinal pressure (P₂): 63.1 TorrFinal volume (V₂): ?Final temperature (T₂): -48 °C

Step 2: Convert the temperatures to the Kelvin scale

We will use the following expression.

K = °C + 273.15

K = 21 °C + 273.15 = 294 K

K = -48 °C + 273.15 = 225 K

Step 3: Calculate the final volume of the balloon

We will use the combined gas law.

P₁ × V₁ / T₁ = P₂ × V₂ / T₂

V₂ = P₁ × V₁ × T₂/ T₁ × P₂

V₂ = 745 Torr × 1.41 × 10⁴ L × 225 K/ 294 K × 63.1 Torr

V₂ = 1.27 × 10⁵ L

You will observe a weak acid-strong base titration in this experiment. Select all statements that are true about weak acid-strong base titrations.
A. Weak acid-strong base titrations always start at a higher pH than strong acid-strong base titrations, no matter the initial concentration.
B. The pH is less than 7 at the equivalence point.
C. The pH is greater than 7 at the equivalence point.
D. Half way to the equivalence point, a buffer region is observed.

Answers

Answer:

The pH is greater than 7 at the equivalence point.

Explanation:

Equivalence point is the point where the acid reacts with the base as stipulated in the equation of the reaction.

When a weak acid and a strong base are titrated, the pH of the solution at equivalence point is actually found to be around about pH ~ 9.

Hence, for a weak acid and strong base titration, The pH is greater than 7 at the equivalence point.

A titration between a weak acid and a strong base yields a solution whose pH is greater than 7 at the equivalence point.

What are weak acids?

Weak acids are acids which only ionize partially in aqueous solutions.

When weak acids are dissolved in water, they produce only few hydrogen ions.

A strong base on the other hand ionizes completely to produce hydroxide ions in aqueous solutions.

The titration of a weak acid and a strong base gives a solution whose pH is greater than 7 at equivalence point.

Learn more about equivalence point at: https://brainly.com/question/18933025

CAN HF USED TO CLEAVE ETHERS EXPLAIN

Answers

Answer:

no

Explanation:

Fluoride is not nucleophilic (having the tendency to donate electrons) enough to allow for the use of HF to cleave ethers in protic media(protic solvents are polar liquid compounds that have dissociable hydrogen atoms). The rate of reaction is comparably low, so that heating of the reaction mixture is required.

How many atoms are in .45 moles of P4010

Answers

Answer:

5×6.02×1023

Explanation:

there are 5×6.02×1023 molecules of p4010 in 5mole. there are four P atoms in a single molecule of p4010

5. A beam of photons with a minimum energy of 222 kJ/mol can eject electrons from a potassium surface. Estimate the range of wavelengths of light that can be used to cause this phenomenon. Show your calculations with units of measure (dimensional analysis) and briefly explain your reasoning.

Answers

Answer: The range of wavelengths of light that can be used to cause given phenomenon is [tex]8.953 \times 10^{21} m[/tex].

Explanation:

Given: 222 kJ/mol (1 kJ = 1000 J) = 222000 J

Formula used is as follows.

[tex]E = \frac{hc}{\lambda}[/tex]

where,

E = energy

h = Planck's constant = [tex]6.625 \times 10^{-25} Js[/tex]

c = speed of light = [tex]3 \times 10^{8} m/s[/tex]

Substitute the values into above formula as follows.

[tex]E = \frac{hc}{\lambda}\\222000 J = \frac{6.625 \times 10^{-34}Js \times 3 \times 10^{8} m/s}{\lambda}\\\lambda = 8.953 \times 10^{21} m[/tex]

Thus, we can conclude that the range of wavelengths of light that can be used to cause given phenomenon is [tex]8.953 \times 10^{21} m[/tex].

Determine whether the reaction will be spontaneous at high temperatures only, at low temperatures only, at all temperatures, or no temperatures. (HINT: Use your chemical sense and your real-world knowledge to predict the signs of delta Hrxn & delta Srxn)


4Fe(s) + 3O2(g) ----> 2Fe2O3(s) [rust]


Circle one:High T, Low T, All T, No T

Answers

Answer:

The rusting of iron is spontaneous at low temperatures.

Explanation:

The given chemical reaction is:

4Fe(s) + 3O2(g) ----> 2Fe2O3(s) [rust]

The rusting of iron is a chemical reaction in which iron reacts with oxygen in presence of moisture and forms iron oxide.

This reaction takes place in a faster rate when there is low temperatures in the atmosphere.

When temperature is low, the moisture in the atmosphere is more and hence, rate of rusting is more.

Identify the oxidation half-reaction for this reaction:
Fe(s) + 2HCl(aq) → FeCl2(aq) + H2(g)
A. Fe2+ + 2e → Fe(s)
O B. H2(g) → 2H+ + 2e
O C. Fe(s) → Fe2+ + 2e
O D. 2H+ + 2e → H2(9)

Answers

Answer:

Fe(s)->Fe2+2e-

Explanation:

A.p.e.x

The oxidation half-reaction for the given reaction is Fe(s) → Fe²⁺ + 2e⁻ Hence, Option (C) is correct

What is Oxidation reaction ?

Oxidation reaction is a chemical reaction which can be described as follows ;

Addition of oxygen Removal of hydrogen Loss of ElectronAddition of electronegative atomRemoval of Electropositive element

In the given reaction ;

Fe(s) + 2HCl(aq) → FeCl₂(aq) + H₂(g)

Fe at RHS got converted to Fe²⁺ state at LHS which shows the gain of electron by Fe with in the reaction.

Therefore,

The oxidation half-reaction for the given reaction is Fe(s) → Fe²⁺ + 2e⁻ Hence, Option (C) is correct

Learn More about redox reaction here ;

https://brainly.com/question/13978139

#SPJ2

why beta carbon hydrogen is easily replaceable but not alpha carbon hydrogen​

Answers

Answer:

Four common types of reactions involving carbonyl reactions: 1) nucleophilic addition; 2) nucleophilic acyl substitution; 3) alpha substitution; 4) carbonyl condensations. The first two were previously discussed and the second two involve the properties of the carbon directly adjacent to the carbonyls, α carbons.

Alpha-substitution reactions results in the replacement of an H attached to the alpha carbon with an electrophile.  

The nucleophile in these reactions are new and called enols and enolates.

Explanation:

The carbon in the carbonyl is the reference point and the alpha carbon is adjacent to the carbonyl carbon.  

Hydrogen atoms attached the these carbons denoted with Greek letters will have the same designation, so an alpha hydrogen is attached to an alpha carbon.  

Aldehyde hydrogens not given Greek leters.  

α hydrogens display unusual acidity, due to the resonance stabilization of the carbanion conjugate base, called an enolate.  

Tautomers are readily interconverted constitutional isomers, usually distinguished by a different location for an atom or a group, which is different than resonance.  

The tautomerization in this chapter focuses on the carbonyl group with alpha hydrogen, which undergo keto-enol tautomerism.  

Keto refers to the tautomer containing the carbonyl while enol implies a double bond and a hydroxyl group present in the tautomer.  

The keto-enol tautomerization equilibrium is dependent on stabilization factors of both the keto tautomer and the enol tautomer, though the keto form is typically favored for simple carbonyl compounds.  

The 1,3 arrangement of two carbonyl groups can work synergistically to stabilize the enol tautomer, increasing the amount present at equilibrium.

The positioning of the carbonyl groups in the 1,3 arrangement allows for the formation of a stabilizing intramolecular hydrogen bond between the hydroxyl group of the enol and the carbonyl oxygen as well as the alkene group of the enol tautomer is also conjugated with the carbonyl double bond which provides additional stabilization.

Aromaticity can also stabilize the enol tautomer over the keto tautomer.

Under neutral conditions, the tautomerization is slow, but both acid and base catalysts can be utilized to speed the reaction up.  

Biological enol forming reactions use isomerase enzymes to catalyze the shifting of a carbonyl group in sugar molecules, often converting between a ketose and an aldose in a process called carbonyl isomerization.

9. How can you separate sugar from a sugar solution contained in a glass without taste? Explain​

Answers

Answer:

See explanation

Explanation:

Sugar is a polar crystalline substance. The sugar crystal is capable of dissolving in water since it is polar.

When sugar dissolves in water, a sugar solution is formed. If I want to separate the sugar from the water in the solution, I have to boil the solution to a very high temperature.

When I do that, the water in the sugar solution is driven off and the pure sugar crystal is left behind.

0.50 g of hydrogen chloride (HCl) is dissolved in water to make 4.0 L of solution. What is the pH of the resulting hydrochloric acid solution

Answers

Explanation:

Given the mass of HCl is ---- 0.50 g

The volume of solution is --- 4.0 L

To determine the pH of the resulting solution, follow the below-shown procedure:

1. Calculate the number of moles of HCl given by using the formula:

[tex]number of moles of a substance=\frac{given mass of the substance}{its molecular mass}[/tex]

2. Calculate the molarity of HCl.

3. Calculate pH of the solution using the formula:

[tex]pH=-log[H^+][/tex]

Since HCl is a strong acid, it undergoes complete ionization when dissolved in water.

[tex]HCl(aq)->H^+(aq)+Cl^-(aq)[/tex]

Thus, [tex][HCl]=[H^+][/tex]

Calculation:

1. Number of moles of HCl given:

[tex]number of moles of a substance=\frac{given mass of the substance}{its molecular mass}\\=0.50g/36.5g/mol\\=0.0137mol[/tex]

2. Concentration of HCl:

[tex]Molarity of HCl=\frac{number of moles of HCl}{its molar mass}\\=\frac{0.0137 mol}{4.0 L} \\= 0.003425 M[/tex]

3. pH of the solution:

[tex]pH=-log[H^+]\\=-log(0.003425)\\=2.47[/tex]

Hence, pH of the given solution is 2.47.

Consider the following equation for the combustion of acetone (C3H6O), the main ingredient in nail polish remover.
C3H6O(l) + 4O2(g) → 3CO2(g) + 3H2O(g) ΔHrxn = −1790kJ
If a bottle of nail polish remover contains 143 g of acetone, how much heat would be released by its complete combustion? Express your answer to three significant figures.

Answers

Molar mass of Acetone

C3H6O3(12)+6+1658g/mol

Now

1 mol releases -1790KJ heat .

Moles of Acetone:-

143/58=2.5mol

Amount of heat:-

2.5(-1790)=-4475kJ

An endothermic reaction will start when the required
energy is received from the environment or solution.
AH
activation
thermal
kinetic

Answers

Answer:

A: ΔH

Explanation:

Endothermic reactions are this that occur as a result of absorption of heat energy from the surroundings by the reactants to form new products.

Thus, we can say it is one with an increase in enthalpy (ΔH) of the system.

Thus, option A is correct.

How many grams of sodium nitrate (NaNO3) are needed to
prepare 100 grams of a 15.0 % by mass sodium nitrate
solution?

Answers

Answer:

15.0 g

Explanation:

15.0% =0.150

100.0 g × 0.150= 15.0g

Sodium nitrate is "an inorganic compound with the formula of NaNO₃.

What is an inorganic compound?

Inorganic compound is "a chemical compound that lacks carbon–hydrogen bonds".

15% = 0.15

100.0 g × 0.15= 15g

Hence, 15g of Sodium nitrate are needed to prepare 100 gms of a 15% by mass sodium nitrate.

To learn more about Sodium nitrate here

https://brainly.com/question/24256699

#SPJ2

How much of a 24-gram sample of Radium-226 will remain unchanged at the end of three half-life periods?

Answers

Answer:

The right answer is "3 g".

Explanation:

Given:

Initial mass substance,

[tex]M_0=24 \ g[/tex]

By using the relation between half lives and amount of substances will be:

⇒ [tex]M=\frac{M_0}{2^n}[/tex]

        [tex]=\frac{24}{2^3}[/tex]

        [tex]=3 \ g[/tex]

Thus, the above is the correct answer.

Which of the following are examples of physical properties of ethanol? Select all that apply.

The boiling point is 78.37°C

It is a clear, colorless liquid

It is flammable

It is a liquid at room temperature

Answers

Ethanol is: flammable, liquid at room temperature, the boiling point is 78.37 ° C.

A molecule of acetone and a molecule of propyl aldehyde are both made from 3 carbon atoms, 6 hydrogen atoms, and 1 oxygen atom. The molecules differ in their arrangement of atoms. How do formulas for the two compounds compare? Both compounds have the same molecular formula, but have unique structural formulas. Both compounds have unique molecular formulas and structural formulas. Both compounds have the same structural formula, but have unique molecular formulas.

Answers

Explanation:

The structures of both acetone and propanal are shown below:

In the formula of propanal there is -CHO functional group at the end.

In acetone -CO- group is present in the middle that is on the second carbon.

The molecular formula is C3H6O.

Both have same molecular formula but different structural formulas.

Draw the structure of the neutral product formed in the reaction of dimethyl malonate and methyl vinyl ketone.

Answers

Answer:

Explanation:

The reaction between dimethyl malonate which is an active methylene group with an (∝, β-unsaturated carbonyl compound) i.e methyl vinyl ketone is known as a Micheal Addition reaction. The reaction mechanism starts with the base attack on the β-carbon to remove the acidic ∝-hydrogens and form a carbanion. The carbanion formed(enolate ion) attacks the methyl vinyl ketone(i.e. a nucleophilic attack at the β-carbon) to give a Micheal addition product, this is followed by the protonation to give the neutral product.

What will be the equilibrium temperature when a 245 g block of lead at 300oC is placed in 150-g aluminum container containing 820 g of water at 12.0oC?

Answers

Answer:

The correct approach is "12.25°C".

Explanation:

Given:

Mass of lead,

mc = 245 g

Initial temperature,

tc = 300°C

Mass of Aluminum,

ma = 150 g

Initial temperature,

ta = 12.0°C

Mass of water,

mw = 820 g

Initial temperature,

tw = 12.0°C

Now,

The heat received in equivalent to heat given by copper.

The quantity of heat = [tex]m\times s\times t \ J[/tex]

then,

⇒ [tex]245\times .013\times (300-T) = 150\times .9\times (T-12.0) + 820\times 4.2\times (T-12.0)[/tex]

⇒             [tex]3.185(300-T) = 135(T-12.0) + 3444(T-12.0)[/tex]

⇒             [tex]955.5-3.185T=135T-1620+3444T-41328[/tex]

⇒                         [tex]43903.5 = 3582.185 T[/tex]

⇒                                  [tex]T = 12.25^{\circ} C[/tex]

During the postabsorptive state, metabolism adjusts to a catabolic state.

a. True
b. False

Answers

Answer:

The postabsorptive state (also called the fasting state) occurs when the food is already digested and absorbed, and it usually occurs overnight, when you sleep (if you skip meals for some days, you will enter in this state).

The catabolic state is the metabolic breakdown of molecules into simpler ones, releasing energy (heat) and utilizable resources.

Now, when you are in a postabsorptive state, the glucose levels start to drop, then the body starts to depend on the glycogen stores, which are catabolized into glucose, this is defined as the start of the postabsorptive state.

So yes, as the postabsorptive states, catabolic processes start to happen, so the statement is true.

Balance the following chemical equation.

CCl4 -> ___ C+ ___ Cl2

Answers

Answer:

Explanation:

CCl4 => C + 2Cl2

Identify each of the following half-reactions as either an oxidation half-reaction or a reduction half-reaction.

half-reaction identification
Cu+(aq)--->Cu2+(aq) + e- _________
I2(s) + 2e--->2I-(aq) _________

Answers

Answer:

Cu+(aq)--->Cu2+(aq) + e- : oxidation

reason: there is loss of electrons.

I2(s) + 2e--->2I-(aq) : reduction

reason: There is reduction of electrons.

Si enfriamos mercurio de 100C. Calcular la cantidad de calor que se debe restar sabiendo que la masa de mercurio es de 1800gr

Answers

Answer:

I do not speak Spanish.

Explanation:

Other Questions
Which is not a water quality monitoring parameter ?1. Habitat2. Turbidity 3.salinity 4. Ph level Produces proteins drop down menus a If a stationary body of water has a constant temperature from top tobottom it is most likely a(n)a. lakeb. pondC.oceand. lagoon Roanoke Company produces chocolate bars. The primary materials used in producing chocolate bars are cocoa, sugar, and milk. The standard costs for a batch of chocolate (1,827 bars) are as follows: Ingredient Quantity Price Cocoa 600 lbs. $0.40 per lb. Sugar 180 lbs. $0.60 per lb. Milk 150 gal. $1.70 per gal. Determine the standard direct materials cost per bar of chocolate. If required, round to the nearest cent. Write the complies number z=3-3i in trigonometric form Find the area in the right tail more extreme than z=0.93 in standard normal distribution, rounded to three decimal places. Can anyone please help? What is the measure of angle x? The correlation coefficient, r, between the prices of smartphones, x, and the number of sales of phones, y, equals 0.63.Select the statement which best describes the relationship between the price and sales.The value of r indicates that the number of sales decreases as the price decreases.The value of r indicates that the number of sales decreases as the price stays the same.The value of r indicates that the number of sales decreases as the price increases.The value of r indicates that the number of sales is not related to the price.I think its (C): The value of r indicates that the number of sales decreases as the price increases. Which artist photographed the above images? What did he pioneer?Name the series of photographs above, and its significance. The absolute value of the dilation factor is the ratio of each side length of the dilated quadrilateral to the corresponding side length of the preimage. How does the ratio of the perimeters in parts B and D compare with the ratio of corresponding side lengths 1.2miles=__________km The ratio of red beads to blue beads on a necklace is 4:7. If there are 16 red beads, how many blue ones are there? Please Help !! Cause I Dont Know Need help someone knows the answer Help me with my work plz. easy algebra question below first correct answer gets brainliest What is the verbs and adverbs in this passage please help A new homeowner had two dogs that frequently barked at birds and squirrels in the yard, especially during the day while the homeowner was at work. A neighbor who worked nights was aggravated by the barking, which disturbed his sleep, and decided to let the homeowner know how he felt. One evening, upon learning that the homeowner was entertaining her boss and several clients, the neighbor came to her front door with a boombox and started playing a recording of the dogs barking, putting it at full volume. When the homeowner came to the door, he began yelling at her and berating her in front of her guests for having no consideration for her neighbors, while continuing to play the recording. The homeowner was very upset, especially because her guests decided that they had better leave, and she ended up losing a bonus that her boss was going to give her at the end of the evening. If the homeowner asserts a claim based on intentional infliction of emotional distress against the neighbor, what will be the probable result which type of scientific inquiry requires variables and control group