Answer:
Explanation:
The question in english is:
A ray of light falls under an angle of incidence of 30 degrees on a flat surface that separates two transparent materials with indexes of refractions 1.60 and 1.40, respectively.
Calculate the angle of refraction (from the environment with the lower index of refraction)
Solution
According to Snell's Law :
[tex]n_{1}sin(\theta_{1})=n_{2}sin(\theta_{2})[/tex]
Where:
[tex]n_{1}=1.6[/tex] is the first medium index of refraction
[tex]n_{2}=1.4[/tex] is the second medium index of refraction
[tex]\theta_{1}=30\°[/tex] is the angle of the incident ray
[tex]\theta_{2}[/tex] is the angle of the refracted ray
We need to find [tex]\theta_{2}[/tex] from the equation above,
[tex]\theta_{2}=sin^{-1}(\frac{n_{1}}{n_{2}}sin\theta_{1} )[/tex]
[tex]\theta_{2}=sin^{-1}(\frac{1.6}{1.4}sin(30\°)[/tex]
[tex]\theta_{2}=34.84\°[/tex]
Therefore, the angle of refraction is 34.84° State the name of the process in each of the following changes of state:
a) Solid to a liquid
b) Liquid to a solid
c) Gas to a liquid
d) Liquid to a gas
Answer:
A. Melting
B. Freezing
C. Condensing
D. Boiling
Explanation:
When steam condenses
a. it changes from the gas phase to the liquid phase.
b. it gives off heat.
c. molecules move closer together.
d. all of the above occur.
Answer:
all of the above?
Explanation:
I think that is
Determine the magnetic flux through a square loop of side a if one side is parallel to, and a distance b from a straight wire that carries a current I.
1. If the loop is pulled away from the wire at speed v, what emf is induced in it?
2. Which way does the induced current flow through the loop?
3. How does the emf vary in time, if the initial position of the left vertical side was b0 at time t=0?
4. Determine the force F required to pull the loop away from the line of current.
Answer:
Find the given attachments
Which of the following particle is responsible for the transfer of static charge?
A. Neutron
B. Electron
C. Proton
D. A & C
Answer:
B. Electron
Static charge is produced by electron transfer.
Explanation:
Answer A: The neutron does not possess a charge and is said to be neutral.
Answer D: Protons and neutrons never move from object to object.
Only negative charges can move freely from one object to another. The energy that comes from these charges particles is called electrical energy.
....
Hope this answer can help you.
The answer is an electron.
Uranium-235 has 92 protons. How many neutrons does it have?
Answer:
146 neutrons.
Explanation:
plzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz mark me brainliest
Answer: The atomic number of uranium (see periodic table) is 92, and the mass number of the isotope is given as 238. Therefore, it has 92 protons, 92 electrons, and 238 — 92 : 146 neutrons.
Explanation:
how do you convert a negative charge to a positive charge?
Answer:
Add the negative protons, to make a positive charge. It's just like math a double negative makes a positive.
~Mia Sedillo~Do u think the benefits of nuclear energy outweigh the dangers
Answer:
While there is no such thing as 100 percent safe, having nuclear energy is much safer than you think. It's thousands of times safer than conventional coal and other fossil-fuel-derived energy, not to mention the specter of environmental disaster from continued use of carbon-based energy sources.29 may. 2011
Explanation:
I hope it helps you
The drawing represents a mountain bike trail. A rider began at Point 1 on the trail and stopped at Point 3. At which point did he have the least potential energy?
Answer:
Point 2.
Explanation:
Potential energy is simply defined as the energy stored in an object due to its position. It is can be represented mathematically by:
P.E = mgh
Where:
P.E is the potential energy.
m is the mass of the object.
g is acceleration due to gravity.
h is the height to which the object is located.
From the above equation, we can thus say that potential energy depends on the height of the object since the mass of the object is always constant i.e as the height of the object increase, the potential energy also increases and as the height of the object decrease, the potential energy also decreases.
Now, considering the diagram in the question given, we can see that point 2 is the lowest height to which the rider is located. At this point i.e point 2, the rider will have the least potential energy.
Answer: Point 2
Explanation:
A 1 kg ball is rolling at 3 m/s.
Answer:
It will roll 9 meters in 3 seconds
Explanation:
3 m/s times 3 is 9
Thanks for warning me.
I'll be careful to stay out of its way.
Do you have a question to ask ?
Object A has a mass of 10 kg and is moving at a velocity of 2.0
m/s. So Object A's momentum is - kg. m/s.
Answer:20kgm/s
Explanation:
Mass=10kg
Velocity=2m/s
Momentum=mass x velocity
Momentum=10 x 2
Momentum=20
Momentum=20kgm/s
The object with mass m when moving with the velocity, its momentum can be calculated. The momentum of the object A is 20 kg.m/s.
What is momentum?Momentum is the product of mass and velocity of a moving object.
If the momentum is p, the mass of the object is 10 kg and the velocity is 2.0 m/s, then the momentum will be
p = 10 × 2.0
p = 20 kg.m/s
Thus, the momentum of the object A is 20 kg.m/s
Learn more about momentum.
https://brainly.com/question/24030570
#SPJ2
What do you think happened to the energy you transferred to the notebook when you pushed it?
Answer:
It got transferred to kinetic energy
Explanation:
Answer:
The energy changed from kinetic energy to heat energy. Friction causes heating.
Hydrogen is a nonmetal with many nonmetal properties. Why is it on the periodic table with the metals in Group 1?
Answer:
This is because it has ns1 electron configuration like the alkali metals.
Pls Mark Brainiest, am trying to become Virtuoso
Chris has a part time job as a cannon ball catcher for the circus. One day he was located an unknown distance away from the cannon. A cannonball was fired from the cannon at 425 m/s. The speed of sound was 345 m/s. Unfortunately the cannonball went past Chris 0.20 s before he heard the sound of the blast. How far away was the cannon from Chris?
show work with answer for brainliest plz
Answer: 366.56 meters.
Explanation:
Velocity of the cannon ball = 425m/s
Velocity of sound = 345 m/s
For the "position" of both, we have the equation:
Pc = 425m/s*t
Ps = 345m/s*t
Where t is time in seconds.
If the position of Chris is X, we have that if the ball reaches the position of Chris in T seconds, then the soundwave reaches the position of Chris in T + 0.20 seconds, we can write this as:
425m/s*T = X
345m/s*(T + 0.20s) = X
Now we can solve this system of equations. First we can replace the first equation in the second equation and get
345m/s*(T - 0.20s) = 425m/s*T
Now we solve this for T.
345*T + 69 = 425*T
69 = (425 - 345)*T = 80*T
T = 69/80 = 0.8625 seconds.
Now we replace this in the first equation and get:
X = 425m/s*T = 425m/s*0.8625s = 366.56 meters.
Which equation is used to calculate the magnetic force on a charge moving in a magnetic field?
F = |g|vBcose
F = |g|vBsine
F = 1g|Bcose
F = 1g|Bsine
Answer:
B
Explanation:
A trip is taken that passes through the following points in order
Point A 0 m
Point B 15.0 m
Point C -30.0 m
Point D -20.0 m
Point E 10.0 m
Point F 5.0 m
What is the distance from Point C to Point E?
answers :
20.0 m
40.0 m
-20.0 m
10.0 m
Answer:
40.0 m
...............
Answer:
35
Explanation:
(x) A change in position is called:
(a) Speed
(b) velocity
(c) displacement
(d) distance
Answer:
(c) displacement
sure answer...
Hope it helps....Pls mark as Brainliest!!!
A light ray has an angle of incidence of 34º. The reflected ray will make what angle with the reflecting surface?
Answer:
Angle of incidence = Angle of Reflection
34° = Angle of Reflection
So, Angle of Reflection is equal to 34°
hope it helps!
Answer: 56 degrees
Explanation:
The angle of incidence is equal to the angle of reflection, but it is not asking us for the angle of reflection. It is asking us for the angle with the reflected SURFACE. It is 90-34= 56. Look at the pic attached if you need a labelled diagram
Indica qué es una propiedad específica de la materia. Además explica por qué son útiles las propiedades específicas de la materia frente a las generales.
Answer:
Check Explanation
Comprobar explicación
Explanation:
English Translation
Indicate what a specific property of matter is. Also explain why the specific properties of matter are useful compared to the general ones.
Solution
The specific properties of matter are properties that describes the intensive properties of the system. They are properties that do not depend on or change with the extent or size of the system. They are usually obtained by dividing the generalised properties or extensive properties by the extent or size of matter to make them independent of size/extent/Mass.
Examples of specific properties include specific heat capacity, specific volume etc. They usually have units of general units/Mass units.
The specific properties of matter are more important than the general ones because
- They help in general comparisons of the properties of different materials. They are used to rank, classify and compare properties of different materials.
- They are used in reference table/data to easily record easily accessible properties of matter. It helps to record standards that are general and independent of sizes/extents/Mass, thereby keeping the reference table/data/chart precise and concise.
- They provide us with values that are easy to memorize and remember, unlike trying to cram the different properties of different masses/sizes of matter.
In Spanish/En español
Las propiedades específicas de la materia son propiedades que describen las propiedades intensivas del sistema. Son propiedades que no dependen ni cambian con la extensión o el tamaño del sistema. Por lo general, se obtienen dividiendo las propiedades generalizadas o las propiedades extensivas por la extensión o el tamaño de la materia para hacerlas independientes del tamaño / extensión / masa.
Los ejemplos de propiedades específicas incluyen capacidad calorífica específica, volumen específico, etc. Usualmente tienen unidades de unidades generales / unidades de masa.
Las propiedades específicas de la materia son más importantes que las generales porque
- Ayudan en las comparaciones generales de las propiedades de diferentes materiales. Se utilizan para clasificar, clasificar y comparar propiedades de diferentes materiales.
- Se utilizan en la tabla / datos de referencia para registrar fácilmente propiedades de materia fácilmente accesibles. Ayuda a registrar estándares que son generales e independientes de tamaños / extensiones / masa, manteniendo así la tabla / datos / tabla de referencia precisa y concisa.
- Nos proporcionan valores que son fáciles de memorizar y recordar, a diferencia de tratar de agrupar las diferentes propiedades de diferentes masas / tamaños de materia.
Hope this Helps!!!
¡¡¡Espero que esto ayude!!!
Why is raw sewage a major pollutant in some countries but not in developed countries?
Answer:because developed cities are more equipped to deal with raw sewage than less developed cities
Explanation:
El coeficiente de variación de la resistencia con la temperatura del carbón es -0.0005/°c.Si la resistencia de una resistencia de carbón es de 1000 a0°c , determine su resistencia a 120°c
Answer:
R (120) = 940Ω
Explanation:
The variation in resistance with temperature is linear in metals
ΔR (T) = R₀ α ΔT
where α is the coefficient of variation of resistance with temperature, in this case α = -0,0005 / ºC
let's calculate
ΔR = 1000 (-0,0005) (120-0)
ΔR = -60 Ω
ΔR = R (120) + R (0) = -60
R (120) = -60 + R (0)
R (120) = -60 + 1000
R (120) = 940Ω
Calculate the first and second velocities of the car with four washers attached to the pulley, using the formulas
v1 = 0.25 m / t1 , and v2 = 0.25 m / (t2 – t1)
where t1 and t2 are the average times the car took to reach the 0.25 and the 0.50 meter marks. Record these velocities, to two decimal places, in Table E
The first and second velocities of the car, with four washers attached to the pulley, are both 0.125 m/s.
We must apply the following calculations to determine the car's first and second velocities with the four washers attached to the pulley:
v1 = 0.25 m / t1
v2 = 0.25 m / (t2 - t1)
Here, t1 denotes the typical time needed for the car to go 0.25 metres, and t2 is the typical time needed to travel 0.50 metres.Let's say that t1 and t2 are the typical times, each lasting two seconds on average.The first formula allows us to determine v1:
v1 = 0.25 m / 2 s = 0.125 m/s
Using the second formula, we can calculate v2:
v2 = 0.25 m / (4 s - 2 s) = 0.125 m/s
Table E can be used to record these values as the velocities at the relevant distances.
for such more questions on velocities
https://brainly.com/question/80295
#SPJ8
Need help on circuit question
The measured mass of a body is found to be 110g. The length is measured by a meter scale. Actual mass and length of the body are 100 g and 10 cm. Find the percentage error in the calculation of density.
Answer:
ok it will be g+181
Explanation:
You are alertly driving a car at 40 MPH (18 m/s). You come around a
bend and see a tree that has fallen across the road 50 meters away. Will
you be able to stop before you hit the tree:
a. on a dry road? Show your evidence.
b. on a wet road? Show your evidence.
Answer: A because yoir tires will grip the ground other than the wet road you will slide and go of in the ditch or go into the tree ...hope this helps
Explanation:
what are the dimensions of the rectangle
Answer:
A rectangle has two dimensions:we can measure its length and,perpendicular to that,its width.
Explanation:
Which biome contains mostly coniferous trees and receives 35 to 100 cm of rain per year?
The question is incomplete as it does not have the options which are:
deciduous forest
taiga (boreal forest)
temperate rainforest
tropical rainforest
Answer:
Taiga (boreal forest)
Explanation:
A Biome refers to the habitat which is occupied by flora and fauna living in similar conditions. These biomes are distinguished based on many features like precipitation, temperature and many other physical factors.
In the given question, the biome which receives an annual rainfall of 35 to 100 cm annually and is mostly covered by the coniferous trees is known as "Taiga biome" which is also known as Boreal forest.
The Taiga biome is one of the largest terrestrial biomes which is present in Eurasia and North America. The biome is characterised by the conifers trees and therefore is also known as the Coniferous trees.
Thus, Taiga (boreal forest) is the correct answer.
Answer: Taiga(boreal forest)
Explanation:
You have a large flashlight that takes 4 D-cell batteries, each with a voltage of 1.5 volts. If the current in the flashlight is 2.0 amps, what is the
resistance?
A 12 ohms
B 0.75 ohms
C 3.0 ohms
D.0.5 ohms
E. 6.0 ohms
Answer:
The answer is "C. 3.0 ohms".
Explanation:
Ohm's law states the following:,
V = IR
where:
Voltage (V) = 1.5 volts × 4 batteries = 6.0 volts
Current (I) = 2.0 amps
Resistance (R) = ? ohms
To solve for Resistance (R) the equation must be rearranged this way:
R = V / I
Then, the variables must be replaced with the known values:
R = 6.0 volts / 2.0 amp
R = 3.0 ohms
The answer is C. 3.0 ohms.
------------
P.D: I got it right on PLATO
Help
What are energy and work
Answer:
In physics, energy is the quantitative property that must be transferred to an object in order to perform work on, or to heat, the object. Energy is a conserved quantity; the law of conservation of energy states that energy can be converted in form, but not created or destroyed.
In physics, energy is the quantitative property that must be transferred to an object in order to perform work on, or to heat, the object. Energy is a conserved quantity; the law of conservation of energy states that energy can be converted in form, but not created or destroyed.
Explanation:
HOPE THIS HELPSSome drops a ball off of the top of a 125-m-tall building. In this prob-lem, you will be solving for the time it takes the ball to hit the ground.(a)Define your coordinate system, be thorough.(b)Write down the given infor-mation, be sure to include hidden information.(c)State what physics principleis at play here. How do you know this?(d)Select an equation.(e)Solve forthe time it takes for the ball to hit the ground.
Answer:
t = 5.05 s
Explanation:
This is a kinetic problem.
a) to solve it we must fix a reference system, let's use a fixed system on the floor where the height is 0 m
b) in this system the equations of motion are
y = v₀ t + ½ g t²
where v₀ is the initial velocity that is v₀ = 0 and g is the acceleration of gravity that always points towards the center of the Earth
e) y = 0 + ½ g t²
t = √ (2y / g)
t = √(2 125 / 9.8)
t = 5.05 s
When using the lens equation, a negative value as the solution for d baseline i indicates that the image is
A. real
B. virtual
C. upright
D. inverted
When using the lens equation, a negative value as the solution for d baseline i indicates that the image is Virtual. The correct option is B.
What is reflection?When a light strikes on a shiny surface, it reflects back the light ray in the same medium. The phenomenon is called reflection and the ray is called the reflected ray.
From the Len's maker formula, e have
1/f = 1/u + 1/v
where f = radius of curvature /2
So, the negative value as the solution for d baseline i indicates that the image is Virtual.
Thus, the correct option is B.
Learn more about reflection.
https://brainly.com/question/2254222
#SPJ5
