Answer:
the answer is D (つ°ヮ°)つ （＾ω＾）
Vhon Anadome
Atomic nucleus questions
Which of the following decay processes results in the largest change in mass of a nucleus?
Choose 1 answer:
А
Beta decay
Gamma decay
Neutron emission
D
Alpha decay
Answer:
d
Explanation:
1. How many molecules of S2 gas are in 756.2 L?
a. 2.032 x 1025 molecules S,
b. 3.022 x 1023 molecules S,
c. 4.302 x 10 molecules S
d. 8.203 x 10' molecules S2
Answer: There are [tex]2.032 \times 10^{25}[/tex] molecules [tex]S_{2}[/tex] gas are in 756.2 L.
Explanation:
It is known that 1 mole of any gas equals 22.4 L at STP. Hence, number of moles present in 756.2 L are calculated as follows.
[tex]Mole = \frac{Volume}{22.4 L}\\= \frac{756.2 L}{22.4 L}\\= 33.76 mol[/tex]
According to mole concept, 1 mole of every substance contains [tex]6.022 \times 10^{23}[/tex] molecules.
Therefore, molecules of S present in 33.76 moles are calculated as follows.
[tex]1 mol = 6.022 \times 10^{23}\\33.76 mol = 33.76 \times 6.022 \times 10^{23}\\= 2.032 \times 10^{25}[/tex]
Thus, we can conclude that there are [tex]2.032 \times 10^{25}[/tex] molecules [tex]S_{2}[/tex] gas are in 756.2 L.
calculate the oxidation numbers of the elements in this equation
2 Al2O3 → 4 Al + 3 O2
Explanation:
Answer
Open in answr app
The rule used here is that the algebraic sum of the oxidation numbers of all the atoms a molecule is zero.
Al2O32× ( oxidation number of Al)+3× ( Oxidation number of O ) = 0
2× ( Oxidation number of Al) +3(−2)=0
2× ( oxidation number of Al) +6
∴ Oxidation number of Al =+3
Which atom attracts electrons most strongly? br F Rb
Fluorine has the highest electronegativity in comparison to other elements therefore, the F atom attracts electrons most strongly.
What is electronegativity?The electronegativity of an atom measures the tendency of an element to attract the bonded electrons pairs towards itself. The electronegativity of an atom is determined with respect to another bonded atom.
Electronegativity can be described as a chemical property of an atom or a functional group to attract electrons toward itself. The electronegativity of an atom depends on the atomic number and the distance of valence electrons from the charged nuclei.
When two different atoms are bonded through a bond. More electronegative will attract the electron density of the bond towards itself.
As we know, the electronegativity decreases as we move down the group in the periodic table. Fluorine is the most electronegative element in the periodic table therefore, Fluorine (F) will attract the electrons toward it most strongly.
Learn more about electronegativity, here:
brainly.com/question/17762711
#SPJ6
Witch part of an atom is mostly empty space?
Who made the first periodic table of the elements?
O A. Ernest Rutherford
O B. Dmitri Mendeleev
O C. Niels Bohr
O D. Henry Moseley
The periodic table was invented by Russian chemist Dmitri Mendeleev in 1869.
Answer:
B. Dmitri Mendeleev
Explanation:
A gas fills up a container that has 2.5L has a pressure of 3.5 atm. If the gas gets transferred to a container that holds 4L, what would the new pressure be?
Which of the following represents an element ? H2O H2 NaCl CaCO3
Answer:
H₂
Explanation:
H₂ is hydrogen in its elemental form.
H₂O, NaCl, and CaCO₃ are all examples of elements added together to create compounds.
Write the nuclear equation for the beta decay
of calcium-45.
Answer:
on https://www.ck12.org/book/peoples-physics-concepts/section/20.1/
Explanation:
it shows for calcium 45 and maybe a possible equation on 3/4th's scroll down?
Which has more molecules in it 10g H, 0 or 10g NaCl*
A)010g of H0
B)10g of NaCl
C)They have the same number of molecules
D)Cannot be determined
Answer:
10 grams of hydrogen
Explanation:
Fill in the coefficients that will balance the following reaction:
If the pressure of a 2.00 L sample of gas is 50.0 kPa, what pressure does the gas exert if its volume is decreased to 20.0 mL?
Which equation should you use?
__________________________________________________________
Which equation should you use?
B. P₁V₁=P₂V₂
What is the new pressure?
✔ 5000 kPa
__________________________________________________________
Explanation:The problem gives initial volume (2.00 L), final volume (20.0 mL), and initial pressure (50.0 kPa). Then it asks to find the final pressure. Answer B has all these variables, with P₁=initial pressure, P₂=final pressure, V₁=initial volume, and V₂=final volume. Plug the given values into the equation and then solve for the unknown value, which is P₂, final pressure.
When plugging in the values, use consistent units. 2L=2000 mL, I chose to make the consistent unit in mL. You'll get the same answer if you choose to use L as the consistent unit.
[tex]2000*50=20*P2[/tex]
[tex]100000=20*P2[/tex]
Divide both sides by 20
[tex]100000/20=(20*P2)/20[/tex]
[tex]5000=P2[/tex]
Here's a photo of Edge just incase.
A test light with an electrical resistance of 9.00 S2 draws a current of 1.50 A when
it is connected to an electrical source. How much power does the light use?
Answer:
20.25 W
Explanation:
Applying,
P = I²R.................... Equation 1
Where P = Power, I = current drawn by the test light, R = Resistance of the test light
From the question,
Given: I = 1.5 A, R = 9.00 Ω
Substitute these values into equation 1
P = (1.5²)(9)
P = 2.25×9
P = 20.25 W
the rows from left to right in the periodic table is called what
Answer:
The periodic table has rows that go left to right and columns that go up and down, just like any other grid. The rows are referred to as PERIODS, while the columns are referred to as GROUPS.
Explanation:
Considering the temperature vs. time graph below, how does the temperature at the beginning of a change of state
compare with the temperature at the end of the change?
Answer:
The temperature on the graph is higher at point 5 than at point 1. The correct answer is the last answer choice that you showed.
Explanation:
The temperature at point 1 is -10 degrees Celsius, while the temperature at point 5 is 120 degrees Celsius. This is a 1300% increase.
See the calculation here: https://www.calculatorsoup.com/calculators/algebra/percent-change-calculator.php?v_1=-10&v_2=120&action=solve
I hope this helps.
The photograph below shows the East African Rift Valley in Africa. Which tectonic movement
of Earth’s crust is most likely responsible for this feature?
Answer:
divergence of continental crust
Explanation:
Write a nuclear equation for the beta decay of Promethium-165
Answer:
see your answer in pic
Explanation:
There can be emissions of radiations like gamma radiation. There can be emission of particles too like alpha particle. Therefore, the nuclear equation for the beta decay of Promethium-165 is
¹⁶⁵Pm[tex]\rightarrow[/tex]⁰e₋₁ + ₆₂Sm¹⁶⁵
What is nuclear decay?Nuclear decay is process in which the radioactive element releases particles or radiations. Alpha particles is ⁴₂He. Alpha particle is nothing but helium particle. The kinetics that is related to nuclear decay is of first order.
The nuclear equation for the beta decay of Promethium-165 is
¹⁶⁵Pm[tex]\rightarrow[/tex]⁰e₋₁ + ₆₂Sm¹⁶⁵
Beta decay of Promethium-165 is the emission of electron particle from the given isotope. the product is Samarium ₆₂Sm¹⁶⁵.
Therefore, the nuclear equation for the beta decay of Promethium-165 is
¹⁶⁵Pm[tex]\rightarrow[/tex]⁰e₋₁ + ₆₂Sm¹⁶⁵
To know more about nuclear decay, here:
https://brainly.com/question/21114779
#SPJ2
lime water turns milky when carbon dioxide gas passed through it and on further exposure to carbon dioxide the milkiness disappear, why
Resultant carbon dioxide passed through limewater in the right tube, producing a milky solution due to precipitation of the insoluble suspension of calcium carbonate: ... The milkiness disappears since calcium bicarbonate is water-soluble.
Determine the volume of a helium balloon given the balloon was filled from a container 0.15L of gas at 2 atm if the new pressure is 0.97 atm. Assume constant temperature.
Answer:
The volume of the helium balloon is 0.306 L.
Explanation:
Boyle's law states that the volume occupied by a given gaseous mass at constant temperature is inversely proportional to pressure. That is, if the pressure increases, the volume decreases, while if the pressure decreases, the volume increases.
Mathematically, Boyle's law indicates that the product of pressure and volume always has the same value:
P*V= k
Assuming that you have a certain volume of gas V1 that is at a pressure P1 at the beginning, by varying the volume of gas to a new value V2, then the pressure will change to P2, and it will be fulfilled:
P1*V1= P2*V2
In this case:
P1= 2 atmV1= 0.15 LP2= 0.97 atmV2= ?Replacing:
2 atm* 0.15 L= 0.97 atm* V2
Solving:
[tex]V2= \frac{2 atm* 0.15 L}{0.97 atm}[/tex]
V2= 0.306 L
The volume of the helium balloon is 0.306 L.
If 0.654 g of oxygen dissolves in 1.5 L of water at 1.65 atm, at what pressure (in atm) would you be able to dissolve 1.35 g in the same amount of water?
Explanation:
dylalove464
06/11/2020
Hello,
In this case, we first compute the moles of oxygen in 0.654 g and 1.35 g by using its molar mass (32 g/mol):
Then, by using the ideal gas equation at the both states, given the same both temperature and volume:
We compute the volume at the second moles:
Best regards.
Answer:
3.41
Explanation:
:)
co2(g)+H20+148Kcal---->H2Co3 Endotérmica o exotérmica
endothermic
requires energy to occure
1. BaBr2(aq) + H2SO4(aq) →?
please balance the equation and predict the products
Answer:
BaBr2 (aq) + H2SO4 (aq) → BaSO4 (s) + 2 HBr (aq)
Explanation:
This is a precipitation reaction: BaSO4 is the formed precipitate.
I need to know the coefficient order
Explanation:
in mathematics use Pascal triangle
How would the balloons interaction with each other change if the balloons were moved further apart? Explain.
Explanation:
It is known that like charges repel each other and unlike charges attract each other.
As the balloons are facing each other with like charges so they will repel each other. Hence, they will move apart.
But when balloons were moved further apart then interaction between them will decrease and then there will be no force of repulsion or force of attraction.
How many moles of H2O
moles of H2O are needed to produce 55.7 moles of H2?
Answer: 55.7 moles of [tex]H_2O[/tex] are needed to produce the given amount of [tex]H_2[/tex]
Explanation:
The number of moles is defined as the ratio of the mass of a substance to its molar mass.
The equation used is:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)
Given values:
Moles of [tex]H_2[/tex] = 55.7 moles
The chemical equation for the decomposition of water follows:
[tex]2H_2O\rightarrow 2H_2+O_2[/tex]
By the stoichiometry of the reaction:
If 2 moles of hydrogen gas is produced from 2 moles of water
So, 55.7 moles of hydrogen gas will be produced by = [tex]\frac{2}{2}\times 55.7=55.7mol[/tex] of water
Hence, 55.7 moles of [tex]H_2O[/tex] are needed to produce the given amount of [tex]H_2[/tex]
Taking into account the reaction stoichiometry,
Reaction stoichiometryIn first place, the balanced reaction is:
2 H₂O → 2 H₂ + O₂
By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:
H₂O: 2 molesH₂: 2 molesO₂: 1 moleMoles of H₂O requiredThe following rule of three can be applied: if by reaction stoichiometry 2 moles of H₂ are produced from 2 moles of H₂O, 55.7 moles of H₂ are produced from how many moles of H₂O?
[tex]moles of H_{2} O=\frac{55.7 moles of H_{2}x 2 moles of H_{2} O}{2 moles of H_{2}}[/tex]
moles of H₂O= 55.7 moles
Finally, 55.7 moles of H₂O is requiredto produce 55.7 moles of H₂.
Learn more about the reaction stoichiometry:
brainly.com/question/24741074
brainly.com/question/24653699
Find the area of the sector with a central angel of 120 and a radius of 8 inshces. Leave in terms of pie
Answer:
A = 66.98 square in.
Explanation:
The Area of a sector is given by the formula
[tex]A = \frac{\theta}{360}\times \pi r^2[/tex]
here θ is the central angle and r is the radius
given that θ = 120° and radius = 8 inches
[tex]A = \frac{120}{360}\times3.14\times 8^2[/tex]
A = 66.98 square in.
Describe two situations in which you observed or performed an energy transformation. For each situation, name the starting form of energy and an ending form of energy.
Answer:
The Sun transforms nuclear energy into heat and light energy.
Our bodies converting chemical energy in our food into mechanical energy for us to be able to move.
An electric fan transforming electrical energy into kinetic energy.
Suppose I have enough ingredients to make 25 cookies, but when I go to bake them, I only get 5. What percent yield did I obtain?
Answer:
Explanation:
What is the "theoretical yield" of cookies from each of the "reactants?"
Theor. yield from eggs
=
12
eggs
×
24 cookies
1
egg
=
288 cookies
Theor. yield from vanilla
=
24
tsp vanilla
×
24 cookies
1
tsp vanilla
=
576 cookies
Theor. yield from salt
=
82
tsp salt
×
24 cookies
0.5
tsp salt
=
3936 cookies
Theor. yield from baking soda
=
84
tsp baking soda
×
24 cookies
0.5
tsp baking soda
=
4032 cookies
Theor. yield from chocolate chips
=
3
cups chocolate chips
×
24 cookies
1.333
cups chocolate chips
=
54 cookies
Theor. yield from sugar
=
11
cups sugar
×
24 cookies
0.5
cup sugar
=
528 cookies
Theor. yield from brown sugar
=
4
cups brown sugar
×
24 cookies
0.5
cup brown sugar
=
192 cookies
Finally, "we leave it as an exercise for the student" to calculate that
Theor. yield from margarine = 72 cookies
b. Identify the limiting reactant
The limiting reactant is the amount of chocolate chips because they can produce the smallest amount of cookies.
c. Determine the theoretical yield
The theoretical yield is 54 cookies, because that is all you can get from the chocolate chips provided.
The percent yield obtained on baking the cookies is 20 % and the theoretical yield is 25 cookies.
What is percent yield?Percent yield is defined as the ratio of actual yield to the theoretical yield multiplied by 100. If the actual and theoretical yield are same then the percent yield is 100%.If actual yield is less than the theoretical yield then the percent yield is less than 100%.Reason of this condition arising is the incompletion of reaction or loss of sample during recovery process.
In cases where percent yield is over 100% it indicates that more sample is recovered than the predicted amount.This condition arises when there are other simultaneous reactions taking place leading to the formation of product. It can also arise if there is incomplete removal of impurities from the sample .
As cookies obtained is 5 it is observed yield while 25 is theoretical yield so the percent yield, 5/25×100=20%.
Learn more about percent yield, here:
https://brainly.com/question/12704041
#SPJ2
If the half life of iridium-182 is 15 years, how much of a 3 gram sample is left after 2 half-lives?
A) .57 grams
B) .70 grams
C) 2.25 grams
D) .75 grams
Answer:
D. 0.75 grams
Explanation:
The data given on the iridium 182 are;
The half life of the iridium 182, [tex]t_{(1/2)}[/tex] = 15 years
The mass of the sample of iridium, N₀ = 3 grams
The amount left, N(t) after two half lives is given as follows;
[tex]N(t) = N_0 \left (\dfrac{1}{2} \right )^{\dfrac{t}{t_{1/2}} }[/tex]
For two half lives, t = 2 × [tex]t_{(1/2)}[/tex]
∴ t = 2 × 15 = 30
[tex]\dfrac{t}{t_{(1/2)}} = \dfrac{30}{15} = 2[/tex]
[tex]\therefore N(t) = 3 \times\left (\dfrac{1}{2} \right )^2 = 0.75[/tex]
∴ The amount left, N(t) = 0.75 grams
Write the complete and net ionic equations for the following reactions. If only the reactants are given, predict the products and balance the equation first.
Explanation:
u can put them in order crossed are spectator ions. hope this helps:)
