Answer:
Density of liquid = 1.59 g/cm³
Explanation:
We'll begin by converting 0.610 L to cm³. This can be obtained as follow:
1 L = 1000 cm³
Therefore,
0.610 L = 0.610 L × 1000 cm³ / 1 L
0.610 L = 610 cm³
Finally, we shall determine the density of the liquid. This can be obtained as follow:
Volume of liquid = 610 cm³
Mass of liquid = 972 g
Density of liquid =?
Density = mass / volume
Density of liquid = 972 / 610
Density of liquid = 1.59 g/cm³
The density of any given liquid is equivalent to the mass of the liquid divided by the volume of the liquid.
From the given information, we have:
The mass of the unknown liquid to be = 972 g
The volume of the unknown liquid to be = 0.610 L = 610 cm³
If the formula for calculating [tex]\mathbf{Density = \dfrac{Mass}{Volume}}[/tex]
Then;
[tex]\mathbf{Density \ of \ the \ unknown \ liquid = \dfrac{972 \\ g}{610 \ cm}}[/tex]
[tex]\mathbf{Density \ of \ the \ unknown \ liquid = 1.593442623 \ g/cm}[/tex]
The Density of the unknown liquid ≅ 1.593 g/cm³
In conclusion, the density of the unknown liquid is 1.593 g/cm³ to 3 significant figures.
Learn more about significant figures here:
https://brainly.com/question/13386983?referrer=searchResults
Write a net ionic equation for the overall reaction that occurs when aqueous solutions of carbonic acid and sodium hydroxide are combined. Assume excess base.
Answer:
[tex]H_2CO_3(aq)+2OH^-(aq)\rightarrow (CO_3)^{2-}(aq)+2H_2O(l)[/tex]
Explanation:
Hello there!
In this case, according to the given information, it turns out possible for us to set up this net ionic equation, by firstly setting up the complete molecular equation as follows:
[tex]H_2CO_3(aq)+2NaOH(aq)\rightarrow Na_2CO_3(aq)+2H_2O(l)[/tex]
Thus, since carbonic acid is weak it merely ionizes whereas sodium hydroxides ionizes for the 100 % as it is strong; thus, we can write the complete ionic equation:
[tex]H_2CO_3(aq)+2Na^+(aq)+2OH^-(aq)\rightarrow 2Na^+(aq)+(CO_3)^{2-}(aq)+2H_2O(l)[/tex]
Whereas sodium ions act as the spectator ones to be cancelled out for us to obtain:
[tex]H_2CO_3(aq)+2OH^-(aq)\rightarrow (CO_3)^{2-}(aq)+2H_2O(l)[/tex]
Regards!
What direction would equilibrium moves towards based on the following if we increased the volume of the container.
[tex]2A_{(g)} + 5B_{(g)} + 12C_{(g)}[/tex] ↔ [tex]14AC_{(g)} + 5B_{(s)}[/tex]
Answer choices:
a) reactants
b) no change
c) products
d) decrease in volume
Please help!
To answer this question, we will first find out the number of gaseous moles on each side of the equilibrium
on the left:
we have 2 moles of A, 5 moles of B and 12 moles of C
which gives us a grand total of 19 gaseous moles
on the right:
here, we have 14 moles of AC gas, we will not count the number of moles of B because it's a solid
giving us 14 gaseous moles on the right
Where does the reaction shift?
more gaseous moles means more space taken, because gas likes to fill all the space it can
if we have more volume, more gas can move around without colliding (reacting) with each other
Hence more volume favors the side with more gaseous moles
here, the left has more gaseous moles. So we can say that the reaction will shift towards the left, or the reactants side
Answer:
Explanation:
given reversible chemical reaction:
2A(g) + 5B(g) + 12C(g) ↔ 14AC(g) + 5B(s)
chemicals in solid form do not take up a lot of volume so change in container volume has no effect
look at chemicals in gas form only:
the total no. of moles of reactants in gas form = 2 + 5 + 12 = 19
the total no. of moles of products in gas form = 14
so an increase in volume of the container will favor the reaction direction with higher volume n high volume means higher no. of moles
the ans is the equilibrium will move towards a) reactants
What is "X" in the following reaction?
A uniform plastic block floats in water with 50.0 % of its volume above the surface of the water. The block is placed in a second liquid and floats with 23.0 % of its volume above the surface of the liquid.
What is the density of the second liquid?
Express your answer with the appropriate units.
Answer:
density of second liquid = 650 kg/m³
Explanation:
Given that:
The volume of the plastic block submerged inside the water = 0.5 V
The force on the plastic block = [tex]\rho_1V_1g[/tex]
[tex]= 0.5p_1 V_g[/tex]
when the block is floating, the weight supporting the force (buoyancy force) is:
W [tex]= 0.5p_1 V_g[/tex]
[tex]\rho Vg = 0.5p_1 V_g[/tex]
[tex]\rho = 0.5 \rho _1[/tex]
where;
water density [tex]\rho _1[/tex] = 1000
[tex]\rho = 0.5 (1000)[/tex]
[tex]\rho = 500 kg/m^3[/tex]
In the second liquid, the volume of plastic block in the water = (100-23)%
= 77% = 0.7 V
The force on the plastic block is:
[tex]= 0.77p_2 V_g[/tex]
when the block is floating, the weight supporting the force (buoyancy force) is:
[tex]W = 0.77p_2 V_g[/tex]
[tex]\rho Vg = 0.77 \rho_2 V_g \\ \\ \rho = 0.77 \rho_2 \\ \\ 500 = 0.77 \rho_2 \\ \\ \rho_2 = 500/0.77[/tex]
[tex]\mathbf{ \rho_2 \simeq 650 \ kg/m^3}[/tex]
What enzyme below is an exoenzyme?
A. Casease
B. Citrase
C. Catalase
D. Oxidase
Classify each molecule as an alcohol, ketone, or aldehyde based on its name. Propanone (acetone) Choose... Ethanal Choose... 3-phenyl-2-propenal Choose... Butanone Choose... Ethanol Choose... 2-propanol Choose...
Answer:
1.) Propanone (ketone)
2.) Ethanal( aldehyde)
3.) 3-phenyl-2-propenal (aldehyde)
4.) Butanone (ketone)
5.) Ethanol ( alcohol)
6.) 2-propanol (alcohol)
Explanation:
In organic chemistry, ALCOHOL ( also known as alkanol) are compounds in which hydroxyl groups are linked to alkyl groups. They can be considered as being derived from the corresponding alkanes by replacing the hydrogen atoms with hydroxyl groups. The hydroxyl group is the functional group of the alcohol as it is responsible for their characteristic chemical properties. A typical example of alcohol is ethanol and 2-propanol.
Alkanals or ALDEHYDES have the general formula RCHO while alkanones or KETONES have the general formula RR'CO where R and R' may be alkyl or aryl groups. The main similarity between these two classes of compounds is the presence of the carbonyl group. In aldehydes, there is a hydrogen atom attached to the carbon In the carbonyl group while there is none on the ketones.
Some common examples of ketones are Propanone, Butanone while examples of aldehydes are Ethanal and 3-phenyl-2-propenal
Calculate the molarity of a 17.5% (by mass) aqueous solution of nitric acid. Select one: a. 2.74 m b. 4.33 m c. 0.274 m d. 3.04 m e. The density of the solution is needed to solve the problem.
Answer:
Option e.
Explanation:
Molarity is the concentration that indicates moles of solute in 1 L of solution.
We have another concentration, percent by mass.
Percent by mass indicates mass of solute in 100 g of solution.
Our solute is HNO₃, our solvent is water.
17.5 g of nitric acid is the mass of solute. We can convert them to moles:
17.5 g . 1mol / 63g = 0.278 moles
We do not have volume of solution. We assume the mass is 100 g because the percent by mass but we need density to state the volume.
Density = Mass / Volume
Mass / Density = Volume
Once we have the volume, we need to be sure the units is in L, to determine molarity
M = mol /L
A hypothetical A-B alloy of composition 53 wt% B-47 wt% A at some temperature is found to consist of mass fractions of 0.5 for both and phases. If the composition of the phase is 92 wt% B-8 wt% A, what is the composition of the phase
Answer:
the composition of the ∝ phase C∝ = 14 or [ 14 wt% B-86 wt% A ]
Explanation:
Given the data in the question;
Co = 53 or [ 53 wt% B-47 wt% A ]
W∝ = 0.5 = Wβ
Cβ = 92 or [ 92 wt% B-8 wt% A ]
Now, lets set up the Lever rule for W∝ as follows;
W∝ = [ Cβ - Co ] / [ Cβ - C∝ ]
so we substitute our given values into the expression;
0.5 = [ 92 - 53 ] / [ 92 - C∝ ]
0.5 = 39 / [ 92 - C∝ ]
0.5[ 92 - C∝ ] = 39
46 - 0.5C∝ = 39
0.5C∝ = 46 - 39
0.5C∝ = 7
C∝ = 7 / 0.5
C∝ = 14 or [ 14 wt% B-86 wt% A ]
Therefore, the composition of the ∝ phase C∝ = 14 or [ 14 wt% B-86 wt% A ]
2. How many joules of heat are released when 32g of water cools down from 71%
specific heat of water is 4.184 J/gºC)
How many kilojoules is this?
he says he doesnt know sorry
complete the following steps.
Remember to follow lower numbered rules first.
Na2CO3(aq) + Pb(OH)2(aq) → NaOH (?) + PbCO3(?)
a. Write a balanced chemical equation. (1 pt)
b. If a reaction occurs, write the balanced
chemical equation with the proper states of matter
(i.e. solid, liquid, aqueous) filled in. If no reaction
occurs, write “No reaction.” (1 pt)
c. If a reaction occurs, write the net ionic equation
for the reaction. If no reaction occurs, write "no
reaction.” (1 pt)
Answer:
See explanation
Explanation:
a) The balanced reaction equation is;
Na2CO3(aq) + Pb(OH)2(aq) -----> 2 NaOH + PbCO3
b) When we include states of matter;
Na2CO3(aq) + Pb(OH)2(aq) -----> 2 NaOH(aq) + PbCO3 (s)
c) Complete ionic equation;
2Na^+(aq) + CO3^2-(aq) + Pb^2+(aq) + 2OH^-(aq) ----> 2Na^+(aq) + 2OH^-(aq) + PbCO3(s)
Net Ionic equation;
Pb^2+(aq) + CO3^2-(aq) ----> PbCO3(s)
Use the Ka values for weak acids to identify the best components for preparing buffer solutions with the given pH values.
Name Formula Ka
Phosphoric acid H3PO4 7.5 x 10^-3
Acetic acid CH3COOH 1.8 x 10^-5
Formic acid HCOOH 1.8 x 10^-4
pH 1.9 =_________
pH 5.0 = ________
pH 3.9= ________
Answer:
pH= 1.9 then [tex]H_{3} PO_{4}[/tex]
pH = 5.0 , [tex]CH_{3} COOH[/tex]
pH = 3.9 , HCOOH
As we know range left [tex]pH= pKa+/- 1[/tex]
A system receives 425 J of heat from and delivers 425 J of work to its surroundings. What is the change in internal energy of the system (in J)?
Answer:
0 J
Explanation:
Applying,
ΔE = q+w................ Equation 1
Where ΔE = change in internal energy of the system, q = Heat of the system, w = work of the system.
Note: q is positive, while w is negative
From the question,
Given: q = 425 J, w = -425 J
Substitute these values into equation 1
ΔE = 425-425
ΔE = 0 J
Hence the change in internal energy of the system is 0 J
Inter-molecular forces determine the _______________ properties while intra-molecular forces determine the ________ properties of compounds.
Answer:
Physical
Chemical
Explanation:
Intermolecular forces are the forces that hold the molecules of a substance together in a particular state of matter. They decide the physical properties of a substance.
The intra molecular forces are the bond forces that hold atoms together in molecules. The nature of this bonding determines the chemical properties of substances.
According to the kinetic theory, all matter is made of moving particles, which measurement of matter is directly proportional to the
average kinetic energy of the particles?
1. Most of the chemicals included in your General Chemistry Lab kit can be discarded down a drain. Describe a situation in which you would need to neutralize a chemical before discarding down a drain.
Answer: Chemicals like acids and bases are harmful and must be neutralized before draining.
Explanation:
A strong acid or strong base is required to be diluted or neutralized before it is discarded in the drain as if is discarded without diluting and neutralization it can spill and splash from sink or drain and can harm people in chemistry lab, moreover the fumes of the discarded chemical on spilling can cause respiratory tract burning and can even cause fire hazard so it must be converted into less harmful form and then must be drained.
You should set out support, like a cork ring or clamp, before removing the glassware from a glassware kit to place the glassware in and to stop it from _________. Thoroughly check that the glasswar is________ and that it does not have any _______before using it.
Answer:
(A) Slipping and breaking
(B) Clean and dry
(C) Cracks
Explanation:
This describes the process of unpacking a glassware for use.
You should set out support like a cork ring or clamp (these are simple machines that'll hold the glassware in place) before removing the glassware from a glassware kit; to place the glassware in and to stop it from slipping and breaking.
Thoroughly check that the glassware is clean and dry and that it does not have any cracks, before using it.
Sometimes in lab we collect the gas formed by a chemical reaction over water . This makes it easy to isolate and measure the amount of gas produced.
Suppose the CO, gas evolved by a certain chemical reaction taking place at 50.0°C is collected over water, using an apparatus something like that in the sketch, and the final volume of gas in the collection tube is measured to be 132. mL. Calculate the mass of CO, that is in the collection tube. Round your answer to 2 significant digits.
Answer:
0.17 g
Explanation:
Since the volume of gas collected is 132 mL, we need to find the number of moles of gas present in 132 mL.
So, number of moles, n = volume of gas, v/molar volume, V
n = v/V where v = 132 mL = 0.132 L and V = 22.4 L
So, substituting the values of the variables into the equation, we have
n = v/V
n = 0.132 L/22.4 L
n = 0.005893 mol
We then need to calculate the molar mass of CO, M = atomic mass of carbon + atomic mass of oxygen = 12 g/mol + 16 g/mol = 28 g/mol
Also, number of moles of gas, n = m/M where m = mass of CO and M = molar mass of CO
m = nM
m = 0.005893 mol × 28 g/mol
m = 0.165004 g
m ≅ 0.17 g to 2 significant digits
For each of the following compounds, indicate the pH at which 50% of the compound will be in a form that possesses a charge and at which pH more than 99% of the compound will be in a form that possesses a charge.
ClCH2COOH (pKa = 2.86)
CH3CH2NH+3 (pKa = 10.7)
Express your answer using two decimal places
a. Determine a pH at which 50% of ClCH2COOH will be in a form that possesses a charge.
b. Determine a pH at which pH more than 99% of ClCH2COOH will be in a form that possesses a charge.
c. Determine a pH at which 50% of CH3CH2NH+3 will be in a form that possesses a charge.
d. Determine a pH at which pH more than 99% of CH3CH2NH+3 will be in a form that possesses a charge.
Answer:
a. 2..86 b. 4.86 c. 10.7 d. 8.7
Explanation:
a. Determine a pH at which 50% of ClCH2COOH will be in a form that possesses a charge.
Using the Henderson-Hasselbalch equation,
pH = pKa + log[A⁻]/[HA]
where [A⁻] = concentration of conjugate base (or charged form) and [HA] = concentration of acid.
At 50% concentration, [A⁻] = [HA] ⇒ [A⁻]/[HA] = 1
So, pH = pKa + log[A⁻]/[HA]
pH = pKa + log1
pH = pKa = 2.86
b. Determine a pH at which pH more than 99% of ClCH2COOH will be in a form that possesses a charge.
Let x be the concentration of the acid. Since 99% of it should possess a charge, the basic concentration is 0.99x while the acidic concentration is remaining 1 % (1 - 0.99)x = 0.01x
Using the Henderson-Hasselbalch equation,
pH = pKa + log[A⁻]/[HA] where [A⁻] = concentration of conjugate base (or charged form) = 0.99x and [HA] = concentration of acid = 0.01x.
pH = pKa + log0.99x/0.01x
pH = pKa + log0.99/0.01
pH = 2.86 + log99
pH = 2.86 + 1.996
pH = 4.856
pH ≅ 4.86
c. Determine a pH at which 50% of CH3CH2NH+3 will be in a form that possesses a charge.
Using the Henderson-Hasselbalch equation,
pH = pKa + log[A⁻]/[HA]
where [A⁻] = concentration of conjugate base and [HA] = concentration of acid.
At 50% concentration, [A⁻] = [HA] ⇒ [A⁻]/[HA] = 1
So, pH = pKa + log[A⁻]/[HA]
pH = pKa + log1
pH = pKa = 10.7
d. Determine a pH at which pH more than 99% of CH3CH2NH+3 will be in a form that possesses a charge.
Let x be the concentration of the acid. Since 99% of it should possess a charge, the basic concentration is 0.01x while the acidic concentration is remaining 99 % (1 - 0.01)x = 0.99x (which possesses the charge).
Using the Henderson-Hasselbalch equation,
pH = pKa + log[A⁻]/[HA] where [A⁻] = concentration of conjugate base = 0.01x and [HA] = concentration of acid = 0.99x.
pH = pKa + log0.01x/0.99x
pH = pKa + log1/99
pH = 10.7 - log99
pH = 10.7 - 1.996
pH = 8.704
pH ≅ 8.7
Write a balanced half-reaction for the oxidation of liquid water to aqueous hydrogen peroxide in basic aqueous solution. Be sure to add physical state symbols where appropriate.
Answer:
O2(g) + 2H2O(l) --------> 2H2O2(aq) + 2e
Explanation:
An oxidation reaction reaction refers to a reaction in which electrons are lost. In this case, we are about to see the full balanced half-reaction for the oxidation of liquid water to aqueous hydrogen peroxide in basic aqueous solution.
The full equation is;
O2(g) + 2H2O(l) --------> 2H2O2(aq) + 2e
So, two electrons were lost in the process.
A sample of oxygen occupies 1.00 L. If the temperature remains constant, and the pressure on the oxygen is decreased to one third the original pressure, what is the new volume
Answer:
3.00 L
Explanation:
P₁V₁ = P₂V₂
V₁ = 1.00 L
P₁ = (x) atm
P₂ = [tex]\frac{1}{3}[/tex] · (P₁) = [tex]\frac{x}{3}[/tex]
V₂ = unknown
(x atm)(1.00 L) = ( [tex]\frac{x}{3}[/tex] atm)(V₂)
divide both sides by ( [tex]\frac{x}{3}[/tex] atm)
( 1.00x )( [tex]\frac{3}{x}[/tex] ) = V₂
x cancels out
(1.00)(3) = V₂
V₂ = 3.00 L
Calculate the mass of sodium phosphate in aqueous solution to fully react with 37 g of chromium nitrate(III) an aqueous solution?(report answer in grams and only three Sigg figs do not put the unit)
Answer:
41 g
Explanation:
The equation of the reaction is;
Cr(NO3)3(aq)+Na3PO4(aq)=3NaNO3(s)+CrPO4(aq)
Number of moles of chromium nitrate = 37g/ 146.97 g/mol = 0.25 moles
1 mole of sodium phosphate reacts with 1 mole of chromium nitrate
x moles of sodium phosphate react as with 0.25 moles of chromium nitrate
x= 1 × 0.25/1
x= 0.25 moles
Mass of sodium phosphate = 0.25 moles × 163.94 g/mol
Mass of sodium phosphate = 41 g
In the given range,at what temperature does oxy gen have the highest solubility?
any two functions of crystals
Answer:
1. Participating in calcium homeostatis storage of calcium.
2. High capacity calcium (Ca) regulation and protection against herbivory
[tex]\large \boxed{\sf 2 \: functions \: of \: crystals \: are :- } [/tex]
_________________
⟹
[tex] \sf \: \underline{ Calcium \: oxalate \: (CaOx) \: crystals} \: are \: distributed \: \\\sf among \: all \: taxonomic \: levels \\ \sf\: of \: photosynthetic \: organisms \: from \\ \sf \: small \: algae \: to \: angiosperms \: and \: giant \: gymnosperms .[/tex]
__________________
⟹
[tex]\sf Bone \: is \: mostly \: made \: of \: \underline{mineral \: crystals} \: \\ \sf and \: the \: protein \: collagen. \: The \: mineral \: crystals \: bone \\ \sf\: provide \: strength \: and \: rigidity \: for \: the \: matrix \: upon \: \\ \sf \: and \: within \: which \: they \: are \: deposited.[/tex]
Classify the processes as endothermic or exothermic.
a. Ice melting
b. Water condensing on surface
c. Baking a cake
d. The chemical reaction inside an instant cold pack.
e. A car using gasoline
endothermic absorbs heat
exothermic gives heat
a. endothermic
b. exothermic
c. endothermic
d. exothermic
a. Ice melting - endothermic
b. Water condensing on the surface - exothermic
c. Baking a cake - endothermic
d. The chemical reaction inside an instant cold pack - endothermic
e. A car using gasoline - exothermic
What is an exothermic and endothermic reaction?An exothermic reaction can be described as a thermodynamic chemical reaction that emits energy from the system to its surroundings usually in the form of light, heat, or sound.
While an endothermic reaction can be described as an opposite of an exothermic reaction where the energy gains in the form of heat. In exothermic chemical reactions, the bond energy is transformed into thermal energy.
In exothermic reactions, the reaction happens the form of the kinetic energy of molecules when the energy is released. The release of energy is due to the electronic transition of electrons from one energy level to another.
The burning of gasoline, and water condensation is also an exothermic reaction in which energy is released while ice melting and baking cake is an endothermic reaction.
Learn more about the exothermic process, here:
brainly.com/question/12321421
#SPJ5
A student prepares a aqueous solution of acetic acid . Calculate the fraction of acetic acid that is in the dissociated form in his solution. Express your answer as a percentage. You will probably find some useful data in the ALEKS Data resource.
Answer:
10.71%
Explanation:
The dissociation of acetic acid can be well expressed as follow:
CH₃COOH ⇄ CH₃COO⁻ + H⁺
Let assume that the prepared amount of the aqueous solution is 14mM since it is not given:
Then:
The I.C.E Table is expressed as follows:
CH₃COOH ⇄ CH₃COO⁻ + H⁺
Initial 0.0014 0 0
Change - x +x +x
Equilibrium (0.0014 - x) x x
Recall that:
Ka for acetic acid CH₃COOH = 1.8×10⁻⁵
∴
[tex]K_a = \dfrac{[x][x]]}{[0.0014-x]}[/tex]
[tex]1.8*10^{-5} = \dfrac{[x][x]]}{[0.0014-x]}[/tex]
[tex]1.8*10^{-5} = \dfrac{[x]^2}{[0.0014-x]}[/tex]
[tex]1.8*10^{-5}(0.0014-x) = x^2[/tex]
[tex]2.52*10^{-8} -1.8*10^{-5}x = x^2[/tex]
[tex]2.52*10^{-8} -1.8*10^{-5}x - x^2 =0[/tex]
By rearrangement:
[tex]- x^2 -1.8*10^{-5}x +2.52*10^{-8}= 0[/tex]
Multiplying through by (-) and solving the quadratic equation:
[tex]x^2 +1.8*10^{-5}x-2.52*10^{-8}= 0[/tex]
[tex](-0.00015 + x) (0.000168 + x) =0[/tex]
x = 0.00015 or x = -0.000168
We will only consider the positive value;
so x=[CH₃COO⁻] = [H⁺] = 0.00015
CH₃COOH = (0.0014 - 0.00015) = 0.00125
However, the percentage fraction of the dissociated acetic acid is:
[tex]= \dfrac{ 0.00015}{0.0014}\times 100[/tex]
= 10.71%
Gaseous BF3 and BCl3 are mixed in equal molar amounts. All B-F bonds have about the same bond enthalpy, as do all B-Cl bonds. Compare the numbers of microstates to explain why the mixture tends to react to form BF2Cl(g) and BCl2F(g
Solution :
[tex]$BF_3 (g) + BCl_3 (g) \rightarrow BF_2 Cl + BCl_F(g)$[/tex]
Explanation 1 :
Spontaneity of the reaction is based on two factors :
-- the tendency to acquire a state of minimum energy
-- the energy of a system to acquire a maximum randomness.
Now, since there isn't much difference in the bond enthalpies of B-F and B-Cl. So, we can say the major driving factor is tendency to acquire a state of maximum randomness.
Explanation 2 :
A system containing the [tex]\text{"chemically mixed"}[/tex] B halides has a [tex]\text{greater entropy}[/tex] than a system of [tex]$BCl_3$[/tex] and [tex]BF_3[/tex].
It has the same number of [tex]\text{gas phase molecules}[/tex], but more distinguishable kinds of [tex]\text{molecules}[/tex], hence, more microstates and higher entropy.
The compound IF5 contains Question 16 options: polar covalent bonds with partial negative charges on the F atoms. ionic bonds. polar covalent bonds with partial negative charges on the I atoms. nonpolar covalent bonds.
Answer:
See explanation
Explanation:
The molecule IF5 possesses five I-F polar bonds. However, the presence of polar bonds does not automatically imply that the molecule will be polar.
The geometry of the molecule is very important in determining the polarity of a compound. Since IF5 has a lone pair of electrons, the molecule is bent and as such there is a permanent dipole moment created in the molecule thereby making IF5 polar in nature.
What is the energy change when 78.0 g of Hg melt at −38.8°C
Answer:
The correct answer is - 2.557 KJ
Explanation:
In this case, Hg is melting, the process is endothermic, so the energy change will have a positive sign.
we can calculate this energy by the following formula:
Q = met
where, m = mass,
e = specific heat
t = temperature
then,
Q = 78*0.14* (273-38.8)
here 0.14 = C(Hg)
= 2.557 Kj
How can a Bose-Einstein condensate be formed? A. B super-heating a gas. B. By super-cooling certain types of solid. C. By super-cooling certain types of plasma. D. By super-heating a plasma
Answer:
C. By super-cooling certain types of plasma.
Explanation:
Bose-Einstein condensate is a state of matter whereby atoms or particles become cooled to a very low energy state leading to their condensation to give a single quantum state.
Note that plasma refers to atoms that have had some or even all of its electrons stripped away leaving only positively charged ions. Simply put, plasma is ionized matter.
When certain types of plasma are super cooled, Bose-Einstein condensate are formed.
once formed, how are coordinate covalent bonds different from other covalent bonds?
Answer:
[tex]\boxed {\boxed {\sf {One \ atom \ donates \ both \ electrons \ in \ a \ pair}}}[/tex]
Explanation:
A covalent bond involves the sharing of electrons to make the atoms more stable, and so they satisfy the Octet Rule (8 valence electrons).
Typically each atom contributes an electron to form an electron pair. This is a single bond. There are also double bonds (two pairs of electrons), triple bonds (three pairs of electrons), and coordinate covalent bonds.
Sometimes, to satisfy the Octet Rule and achieve stability, one atom contributes both of the electrons in an electron pair. This is different from other covalent bonds because usually each of the 2 atoms contributes an electron to make a pair.
