Answer:
I am sure it is D or C. have a nice day
1. A light bulb is filled with 3.54 g of argon at 25 C and 725 mmHg. What is
the volume of this gas?
Answer: The volume of given gas is 2.27 L.
Explanation:
Given: Mass = 3.54 g
Temperature = [tex]25^{o}C[/tex] = (25 + 273) K = 298 K
Pressure = 725 mm Hg (1 mm Hg = 0.00131579) = 0.95 atm
As moles is the mass of substance divided by its molar mass.
So, moles of argon (molar mass = 40 g/mol) is as follows.
[tex]Moles = \frac{mass}{molar mass}\\= \frac{3.54 g}{40 g/mol}\\= 0.0885 mol[/tex]
Formula used to calculate the volume of given gas is as follows.
PV = nRT
where,
P = pressure
V = volume
n = no. of moles
R = gas constant = 0.0821 L atm/mol K
T = temperature
Substitute the values into above formula as follows.
[tex]PV = nRT\\0.95 atm \times V = 0.0885 mol \times 0.0821 L atm/mol K \times 298 K\\V = 2.27 L[/tex]
Thus, we can conclude that the volume of given gas is 2.27 L.
how many moles are in 150 grams of water
Answer:
Solution given:
H20=1+1+16=18grams
we have
1 mole of water =18grams
now
150grams of water=1/18*150=25/3 =8.33mole.
150 grams of water =8.33mole.
Note:
mole =given mass/actual mass of molecule/atom
1 mole of water is 18 grams.
Then,
150 grams of water,
→ 1/18 × 150
→ 25/3
→ 8.33333 . . .
Hence, 150 grams of water is 8.3 moles.
How can you tell if an element has been reduced? A. The number of its electrons has not changed in the reaction, B. It has a positive oxidation state in the product, C. It has more electrons in the product than in the reactant, D. It has fewer electrons in the product than in the reactant.
Answer:
C. It has more electrons in the product than in the reactant
Explanation:
A type of reaction is called REDOX or oxidation-reduction reaction. In this reaction, substances (element or compounds) involved are either oxidized or reduced. To be oxidized means that a substance has lost electrons and hence, have a positive oxidation state in the product side.
On the other hand, reduction means that the substance has gained or accepted electrons, and hence has a reduced oxidation state in the product side. In other words, a reduced element will have more electrons in the product than in the reactant.
For example, in the following equation:
A + B = A- + B+
A is said to be reduced because it has more electrons (1) in the product than in the reactant (0).
Which of the following is a correct statement about water?
A)Hydrogen bonding causes water to be strongly cohesive.
B)Hydrogen bonding causes water to have a low surface tension.
C)Water is a universal solvent because polar and nonpolar solutes can dissolve in it.
D) Water is less dense as a liquid than as a solid because of changes in bond structure.
Answer:
D) Water is less dense as a liquid than as a solid because of changes in bond structure.
Explanation:
I hope I was able to help!
Have a nice day :)
The correct statements about water is that hydrogen bonding causes water to be strongly cohesive and is less dense as a liquid and solid.
What is hydrogen bonding?It is bonding in between the hydrogen atom and most electronegative atoms like flourine, chlorine, oxygen atoms, etc.
In water molecule hydrogen bonding is present in the form of intermolecular as well as intramolecular force and makes it more cohesive to get attracted towards each other.Water molecule has a high surface tension, as a result of which it is able to form a drop of water.Water is not a universal solvent, else it is a polar solvent and able to dissolve only polar molecules.It is also true that water is less dense as a liquid than as a solid because of changes in bond structure.Hence water is less dense as a liquid than as a solid because of changes in bond structure and hydrogen bonding causes water to be strongly cohesive.
To know more about water, visit the below link:
https://brainly.com/question/18681949
Consider the reaction 4FeS2 + 11O2 → 2Fe2O3 + 8SO2. If 8 moles of FeS2 react with 15 moles of O2, what is the limiting reactant? (3 points)
Select one:
a. FeS2
b. Fe2O3
c. O2
d. SO2
If 8 moles of FeS2 react with 15 moles of O2, the limiting reactant is O2.
WHAT IS LIMITING REACTANT:A limiting reactant is reactant that is totally consumed when the chemical reaction is completed.According to this question, the following reaction was given: 4FeS2 + 11O2 → 2Fe2O3 + 8SO2.4 moles of FeS₂ reacts with 11 moles of O₂
This means, 8 moles of FeS₂ will react with (8 × 11/2) = 22 moles of O₂15 moles of O₂ is available. In comparison with 22 moles, O₂ is in short supply .
Therefore, If 8 moles of FeS2 react with 15 moles of O2, O₂ is the limiting reagent.
Learn more about limiting reactant at: https://brainly.com/question/14225536
Answer:
They are right it's O2
Explanation:
I accidently rated it low but it's 100% right
Please somone help me with a chemistry question brainliest to whoever answers correctly and 20 points
Answer:
289.15k is the answer buddy
which of these elements has two valence electrons?
a. hydrogen (H)
b. barium (Ba)
c. nitrogen (N)
d. krypton (Kr)
e. bromine (Br)
Calculate the volume of an
object with the following
dimension:
4.0 cm x 1.2 cm x 2.5 cm
[?] cm3
Answer: The volume of given object is 12.0 [tex]cm^{3}[/tex].
Explanation:
Given: Length = 4.0 cm
Width = 1.2 cm
Height = 2.5 cm
Formula to calculate the volume of such an object is as follows.
[tex]Volume = length \times width \times height[/tex]
Substitute the values into above formula as follows.
[tex]Volume = length \times width \times height\\= 4.0 cm \times 1.2 cm \times 2.5 cm\\= 12.0 cm^{3}[/tex]
Thus, we can conclude that the volume of given object is 12.0 [tex]cm^{3}[/tex].
[tex]what \: is \: acid \: \: \: {?} [/tex]
meaning:An acid is a chemical substance, usually a liquid, which contains hydrogen and can react with other substances to form salts. Some acids burn or dissolve other substances that they come into contact with.
Answer:
Hope it help you#CarryOnLearningCopper(II) sulfate is an active ingredient in tree stump remover. In order to help remove
a tree that was causing foundational damage to a school, a chemistry student soaked
the roots with copper(ll) sulfate. The removed tree was later dried and used as
firewood. Assuming the copper(II) sulfate is present in the wood, what color would be
observed in the fire?
Answer:
the tree red
Explanation:
Copper (II) substances burn to produce bluish-green flames.
Flame test for copper (II)The copper (II) present in the wood will make the flame produce a bluish-green color.
This is because copper (II) compounds are known to produce flame colors that range from blue to bluish-green when tested in the laboratory.
This is because the electrons in the atoms of copper lose energy and drop to lower energy, releasing the lost energy as light in the process.
More on flame tests can be found here: https://brainly.com/question/6357832
#SPJ2
What is used to describe the conditions of a reaction at equilibrium?
O A. A reaction-rate constant
O B. An activation energy
O C. An ideal gas constant
O D. An equilibrium constant
SUBM
What is the gram molecular mass of a compound if 5 moles of the compouns has a mass of 100 grams?
Answer:
20 grams.
Explanation:
5 mols of a compound has a mass of 100 grams
1 mol of the same compound has a mass of 100/5 = 20 grams
14. Ionic compound is brittle solid but break
apart when hit this property is due to...
A) Dissolved in water
B) Arrangement of similar ions
C) Ions do not move
D) Arrangement of opposite ions
Answer:
A
not sure of answer ndhfhfjfjcjfjfj
The expression for the equilibrium constant for the reaction:
Ba3N2 (aq) + 6 H2O(1)-
3 Ba(OH)2 (aq) + 2 NH3 (9)
Answer:
[tex]Kc\frac{(Ba3N2)(H2O)^6}{(Ba(OH)2)^3(NH3)^2}[/tex]
Explanation:
Because kc equals products/reactants hope this helps :)
What unit is used for atomic mass
Calculate the pressure kPa of 0.421 mole of helium gas at 254 degree celsius when it occupies a volume of 3.32 L.
A 16.4L sample of NO2(S) has a density of 1.89 g/L. What is the mass of the sample NO2(s)?
A) 31.0 grams
B) 14.5 grams
C) 8.68 grams
D) 0.115 grams
Answer:
A. 31.0
Explanation:
Remember the formula [tex]Density = \frac{mass}{Volume}[/tex], or [tex]D=\frac{m}{V}[/tex].
The problem tells us that the density is 1.89 g/L, and that the volume is 16.4 L.(Remember that if the units are in some form of liters, it is volume, similar to how if the units are in grams, it is mass.)
Plug in the numbers for density and volume, and you will get:
[tex]1.89=\frac{m}{16.4}[/tex]
Then, multiply both sides by 16.4 to get:
m = 30.996 g ≈ 31.0 g
Hope this helps!
please help mee 11-14
Answer:
11. A)outward
12. B) inward
13. B) opaque
14. I really don't know (sorry)
Explanation:
How many silicons atoms are there in 0.0356 moles of silicon
Answer:
2.14 × 10²² atoms Si
General Formulas and Concepts:
Atomic Structure
Reading a Periodic TableMolesStoichiometry
Using Dimensional AnalysisExplanation:
Step 1: Define
Identify
[Given] 0.0356 mol Si
[Solve] atoms Si
Step 2: Identify Conversions
Avogadro's Number - 6.022 × 10²³ atoms, molecules, formula units, etc.
Step 3: Convert
[DA] Set up: [tex]\dipslaystyle 0.0356 \ mol \ Si(\frac{6.022 \cdot 10^{23} \ atoms \ Si}{1 \ mol \ Si})[/tex][DA] Multiply [Cancel out units]: [tex]\dipslaystyle 2.14383 \cdot 10^{22} \ atoms \ Si[/tex]Step 4: Check
Follow sig fig rules and round. We are given 3 sig figs.
2.14383 × 10²² atoms Si ≈ 2.14 × 10²² atoms Si
Calculate the molarity of the following solution: 1.0 mole of KCl in .75 L of solution.
1.3 M
2.0 M
0.750 M
99 M
Answer:
1.3 M
Explanation:
1 mole= Concentration * Volume
1 mole=C*0.75 L
C=1.3 M
How much mass does 1 mol of O2 gas have?
O A. 16.00 x 2g
O B. 16.00 x (6.02 x 10^23) g
C. 2 x (6.02 x 10^23) g
D. 16.00 g
Answer:
Option A.
Explanation:
1 mol of anything contains 6.02×10²³ particles.
We know that 1 mol of oxygen gas contains 2 moles of O.
1 mol of oxygen weighs 16 g/mol, the mass for 1 molecule of O.
By the way, the mass for 1 mol of O₂ may be:
Option A → 16 g/mol . 2 mol
32 g
Oyxgen is a dyatomic molecule, that's why we have 2 moles of O.
Another example can be:
1 mol of water (H₂O) contains 2 moles of H and 1 mol of O.
What is the mass of 10.5 moles of H20?
Answer:
180g
Explanation:
So, 10 mole of water will weigh (18x10) = 180g.
Question: What happens with the electrons between two atoms in a polar covalent bond?
a) Electrons are equally shared
b) Electrons are transferred
c) Electrons are unequally shared
d) Electrons become mobile in a ‘sea of electrons’
Answer:
c) Electrons are unequally shared
In which classification of matter are the components chemically combined?
A metal
B compound
C mixture
D Metalloids
What type of molecule is shown below?
A. Ether
B. Alcohol
C. Aldehyde
D. Ketone
The given molecule is an aldehyde with the formula HCHO. It is the simplest and primary aldehyde . Hence, option c is correct.
What are aldehydes ?Aldehydes are a class of organic compounds that contain a carbonyl group (a carbon double-bonded to an oxygen) at the end of a carbon chain. The general formula for an aldehyde is RCHO, where R is a substituent or side chain attached to the carbonyl group.
Aldehydes are often characterized by their distinctive odor, which can be described as pungent and irritating. Some common aldehydes include formaldehyde (used in building materials and as a disinfectant), acetaldehyde (found in alcoholic beverages), and benzaldehyde (used in food flavorings).
Aldehydes are important intermediates in many chemical reactions, and they are used in a variety of industrial and laboratory applications. They can be synthesized by the oxidation of primary alcohols or by the partial oxidation of hydrocarbons. The given compound is formaldehyde HCHO.
Find more on aldehydes:
https://brainly.com/question/30902678
#SPJ7
help chemistry pls answer
2. When we lift a stool, its ____________
A) gravitational potential energy is increased
B) gravitational potential energy is decreased
C) kinetic energy is decreased
D) gravitational potential energy remains unchanged
A.)
Standing on an elevated ledge would be more potential energy than standing on the ground. Same applies for anything else -- Including a chair!
If the change in velocity increases, what happens to the acceleration during the same time period?
Acceleration decreases.
Acceleration increases.
Acceleration becomes negative.
Acceleration becomes steady.
Answer:
Acceleration decreases
Answer:
its b
Explanation:
What is the IUPAC name of linkage isomer of [(NH3)3Pt(NO2)]Cl ? (remember it's linkage isomer)
triamminechloroplatinum(II) nitrite
A certain element has two naturally occurring isotopes. The atomic mass of isotope 1 (35.4723 % natural abundance) is 184.9529 amu. Determine the atomic mass of isotope 2. The average atomic mass of the element is 186.2071 amu. Do not include units; report answer to 4 decimal places.
Answer:
the value
Explanation:
