NASA is giving serious consideration to the concept of solar sailing. A solar sailcraft uses a large, low- mass sail and the energy and momentum of sunlight for propulsion.
Should the sail be absorbing or reflective? Why?
a. The sail should be reflective because in this case the momentum transferred to the sail per unit area per unit time is smaller than for absorbing sail, therefore the radiation pressure is larger for the reflective sail
b. The sail should be absorbing because in this case the momentum transferred to the sail per unit area per unit time is larger than for reflective sail, therefore the radiation pressure is larger for the absorbing sail
c. The sail should be absorbing because in this case the momentum transferred to the sail per unit area per unit time is smaller than for reflective sail, therefore the radiation pressure is larger for the absorbing sail.
d. The sail should be reflective because in this case the momentum transferred to the sail per unit area per unit time is larger than for absorbing sail, therefore the radiation pressure is larger for the reflective sail

Answers

Answer 1

Answer:

d. The sail should be reflective because in this case the momentum transferred to the sail per unit area per unit time is larger than for absorbing sail, therefore the radiation pressure is larger for the reflective sail.

Explanation:

Let us take the momentum of a photon unit as u

we know that the rate of change of momentum is proportional to the force exerted.

For a absorbing surface, the photon is absorbed, therefore the final momentum is zero. From this we can say that

F = (u - 0)/t = u/t

for a unit time, the force is proportional to the momentum of the wave due to its energy density. Therefore,

F = u

For a reflecting surface, the momentum of the wave strikes the sail and changes direction. Since we know that the speed of light does not change, then the force is proportional to

F = (u - (-u))/t = 2u/t

just as the we did above, it becomes

F = 2u.

From this we can see that the force for a reflective sail is twice of that for an absorbing sail, and we know that the pressure is proportional to the force for a given area. From these, we conclude that the sail should be reflective because in this case the momentum transferred to the sail per unit area per unit time is larger than for absorbing sail, therefore the radiation pressure is larger for the reflective sail.


Related Questions

A car travels at 45 km/h. If the driver breaks 0.65 seconds after seeing the traffic light turn yellow, how far will the car continue to travel before it begins to slow?

Answers

Answer:

8.1 m

Explanation:

Convert km/h to m/s.

45 km/h × (1000 m/km) × (1 h / 3600 s) = 12.5 m/s

Distance = speed × time

d = (12.5 m/s) (0.65 s)

d = 8.125 m

A thermos bottle works well because:

a. its glass walls are thin
b. silvering reduces convection
c. vacuum reduces heat radiation
d. silver coating is a poor heat conductor
e. none of the above

Answers

Answer:

A thermos bottle works well because:

A) Its glass walls are thin

Answer:

A thermos bottle works well because:

C

Vacuum reduces heat radiation

When light of wavelength 233 nm shines on a metal surface the maximum kinetic energy of the photoelectrons is 1.98 eV. What is the maximum wavelength (in nm) of light that will produce photoelectrons from this surface

Answers

Answer:

λmax = 372 nm

Explanation:

First we find the energy of photon:

E = hc/λ

where,

E = Energy of Photon = ?

λ = Wavelength of Light = 233 nm = 2.33 x 10⁻⁷ m

c = speed of light = 3 x 10⁸ m/s

h = Planks Constant = 6.626 x 10⁻³⁴ J.s

Therefore,

E = (6.626 x 10⁻³⁴ J.s)(3 x 10⁸ m/s)/(2.33 x 10⁻⁷ m)

E = 8.5 x 10⁻¹⁹ J

Now, from Einstein's Photoelectric Equation:

E = Work Function + Kinetic Energy

8.5 x 10⁻¹⁹ J = Work Function + (1.98 eV)(1.6 x 10⁻¹⁹ J/1 eV)

Work Function = 8.5 x 10⁻¹⁹ J - 3.168 x 10⁻¹⁹ J

Work Function = 5.332 x 10⁻¹⁹ J

Since, work function is the minimum amount of energy required to emit electron. Therefore:

Work Function = hc/λmax

λmax = hc/Work Function

where,

λmax = maximum wavelength of light that will produce photoelectrons = ?

Therefore,

λmax = (6.626 x 10⁻³⁴ J.s)(3 x 10⁸ m/s)/(5.332 x 10⁻¹⁹ J)

λmax = 3.72 x 10⁻⁷ m

λmax = 372 nm

A 590-turn solenoid is 12 cm long. The current in it is 36 A . A straight wire cuts through the center of the solenoid, along a 4.5-cm diameter. This wire carries a 27-A current downward (and is connected by other wires that don't concern us).
What is the magnitude of the force on this wire assuming the solenoid's field points due east?

Answers

Complete Question

A 590-turn solenoid is 12 cm long. The  current in it is 36 A . A 2 cm straight wire cuts through the center of the solenoid, along a 4.5-cm diameter. This wire carries a 27-A current downward (and is connected by other wires that don't concern us).

What is the magnitude of the force on this wire assuming the solenoid's field points due east?

Answer:

The force is  [tex]F = 0.1602 \ N[/tex]

Explanation:

From the question we are told that

   The number of turns is  [tex]N = 590 \ turns[/tex]

   The  length of the solenoid is  [tex]L = 12 \ cm = 0.12 \ m[/tex]

   The current is  [tex]I = 36 \ A[/tex]

   The  diameter is  [tex]D = 4.5 \ cm = 0.045 \ m[/tex]

   The  current carried by the wire is  [tex]I = 27 \ A[/tex]

    The  length of the wire is  [tex]l = 2 cm = 0.02 \ m[/tex]

Generally the magnitude of the force  on this wire assuming the solenoid's field points due east is mathematically represented as

           [tex]F = B * I * l[/tex]

Here  B  is the magnetic field which is mathematically represented as

          [tex]B = \frac{\mu_o * N * I }{L}[/tex]

Here   [tex]\mu _o[/tex] is permeability of free space with value  [tex]\mu_ o = 4\pi *10^{-7} \ N/A^2[/tex]

substituting values

         [tex]B = \frac{4 \pi *10^{-7} * 590 * 36 }{ 0.12}[/tex]

           [tex]B = 0.2225 \ T[/tex]

So

      [tex]F = 0.2225 * 36 * 0.02[/tex]

      [tex]F = 0.1602 \ N[/tex]

Object A, with heat capacity CA and initially at temperature TA, is placed in thermal contact with object B, with heat capacity CB and initially at temperature TB. The combination is thermally isolated. If the heat capacities are independent of the temperature and no phase changes occur, the final temperature of both objects is

Answers

Answer:

d) (CATA + CBTB) / (CA + CB)

Explanation:

According to the given situation, the final temperature of both objects is shown below:-

We assume T be the final temperature

while m be the mass

So it will be represent

m CA (TA - T) = m CB (T - TB)

or we can say that

CATA - CA T = CB T - CBTB

or

(CA + CB) T = CATA + CBTB

or

T = (CA TA + CBTB) ÷ (CA + CB)

Therefore the right answer is d

The final temperature of both objects is [tex]T = \frac{C_AT_A+ C_BT_B}{C_B + C_A} \\\\[/tex].

The given parameters;

heat capacity of object A = CAinitial temperature of object A = TAheat capacity of object B = CBinitial temperature of object B = TB

The final temperature of both objects is calculated as follows;

heat lost by object A is equal to heat gained by object B

[tex]mC_A (T_A - T) = mC_B(T- T_B)\\\\C_AT_A-C_AT = C_BT - C_BT_B\\\\C_BT+C_AT = C_AT_A+ C_BT_B\\\\T(C_B + C_A) = C_AT_A+ C_BT_B \\\\T = \frac{C_AT_A+ C_BT_B}{C_B + C_A} \\\\[/tex]

Thus, the final temperature of both objects is [tex]T = \frac{C_AT_A+ C_BT_B}{C_B + C_A} \\\\[/tex].

Learn more here:https://brainly.com/question/17163987

If the
refractive index of benzere is 2.419,
what is the speed of light in benzene?

Answers

Answer:

[tex]v=1.24\times 10^8\ m/s[/tex]

Explanation:

Given that,

The refractive index of benzene is 2.419

We need to find the speed of light in benzene. The ratio of speed of light in vacuum to the speed of light in the medium equals the refractive index. So,

[tex]n=\dfrac{c}{v}\\\\v=\dfrac{c}{n}\\\\v=\dfrac{3\times 10^8}{2.419}\\\\v=1.24\times 10^8\ m/s[/tex]

So, the speed of light in bezene is [tex]1.24\times 10^8\ m/s[/tex].

A body is thrown vertically upwards with a speed of 95m / s and after 7s it reaches its maximum height. How fast does it reach its maximum height? What was the maximum height reached?

Answers

Explanation:

u = 95 m/sec ( Initial speed)

t = 7 sec ( Time of ascent)

According to Equations of Motion :

[tex]s = ut - \frac{1}{2} g {t}^{2} [/tex]

Max. Height = 95 * 7 - 4.9 * 49 = 424. 9 = 425 m

Answer:

332.5 m

Explanation:

At the maximum height, the velocity is 0.

Given:

v₀ = 95 m/s

v = 0 m/s

t = 7 s

Find: Δy

Δy = ½ (v + v₀) t

Δy = ½ (0 m/s + 95 m/s) (7 s)

Δy = 332.5 m

A high school physics student claims her muscle car can achieve a constant acceleration of 10 ft/s/s. Her friend develops an accelerometer to confirm the feat. The accelerometer consists of a 1 ft long rod (mass=4 kg) with one end attached to the ceiling of the car, but free to rotate. During acceleration, the rod rotates. What will be the angle of rotation of the rod during this acceleration? Assume the road is flat and straight.

Answers

Answer: Ф = 17.2657 ≈ 17°

Explanation:

we simply apply ET =0 about the ending of the rod

so In.g.L/2sinФ - In.a.L/2cosФ = 0

g.sinФ - a.cosФ = 0

g.sinФ = a.cosФ

∴ tanФ = a/g

Ф =  tan⁻¹ a / g

Ф = tan⁻¹ ( 10 / 32.17405)

Ф = tan⁻¹ 0.31080948777

Ф = 17.2657 ≈ 17°

Therefore the angle of rotation of the rod during this acceleration is 17.2657 ≈ 17°

Suppose you are planning a trip in which a spacecraft is to travel at a constant velocity for exactly six months, as measured by a clock on board the spacecraft, and then return home at the same speed. Upon return, the people on earth will have advanced exactly 120 years into the future. According to special relativity, how fast must you travel

Answers

Answer:

I must travel with a speed of 2.97 x 10^8 m/s

Explanation:

Sine the spacecraft flies at the same speed in the to and fro distance of the journey, then the time taken will be 6 months plus 6 months

Time that elapses on the spacecraft = 1 year

On earth the people have advanced 120 yrs

According to relativity, the time contraction on the spacecraft is gotten from

[tex]t[/tex] = [tex]t_{0} /\sqrt{1 - \beta ^{2} }[/tex]

where

[tex]t[/tex] is the time that elapses on the spacecraft = 120 years

[tex]t_{0}[/tex] = time here on Earth = 1 year

[tex]\beta[/tex] is the ratio v/c

where

v is the speed of the spacecraft = ?

c is the speed of light = 3 x 10^8 m/s

substituting values, we have

120 = 1/[tex]\sqrt{1 - \beta ^{2} }[/tex]

squaring both sides of the equation, we have

14400 = 1/[tex](1 - \beta ^{2} )[/tex]

14400 - 14400[tex]\beta ^{2}[/tex] = 1

14400 - 1 = 14400[tex]\beta ^{2}[/tex]

14399 = 14400[tex]\beta ^{2}[/tex]

[tex]\beta ^{2}[/tex] =  14399/14400 = 0.99

[tex]\beta = \sqrt{0.99}[/tex] = 0.99

substitute β = v/c

v/c = 0.99

but c = 3 x 10^8 m/s

v = 0.99c = 0.99 x 3 x 10^8 = 2.97 x 10^8 m/s

Ellen says that whenever the acceleration is directly proportional to the displacement of an object from its equilibrium position, the motion of the object is simple harmonic motion. Mary says this is true only if the acceleration is opposite in direction to the displacement. Which one, if either, is correct

Answers

Answer:

Both Ellen and Mary are correct.

Explanation:

Both are correct, it's just different ways of saying the same thing.

When the acceleration is always opposite in direction to the displacement, then, the acceleration is directly proportional to the displacement of an object from its equilibrium position

A 750 gram grinding wheel 25.0 cm in diameter is in the shape of a uniform solid disk. (we can ignore the small hole at the center). when it is in use, it turns at a consant 220 rpm about an axle perpendicular to its face through its center. When the power switch is turned off, you observe that the wheel stops in 45.0 s with constant angular acceleration due to friction at the axle. What torque does friction exert while this wheel is slowing down?

Answers

Answer:

Torque = 0.012 N.m

Explanation:

We are given;

Mass of wheel;m = 750 g = 0.75 kg

Radius of wheel;r = 25 cm = 0.25 m

Final angular velocity; ω_f = 0

Initial angular velocity; ω_i = 220 rpm

Time taken;t = 45 seconds

Converting 220 rpm to rad/s we have;

220 × 2π/60 = 22π/3 rad/s

Equation of rotational motion is;

ω_f = ω_i + αt

Where α is angular acceleration

Making α the subject, we have;

α = (ω_f - ω_i)/t

α = (0 - 22π/3)/45

α = -0.512 rad/s²

The formula for the Moment of inertia is given as;

I = ½mr²

I = (1/2) × 0.75 × 0.25²

I = 0.0234375 kg.m²

Formula for torque is;

Torque = Iα

For α, we will take the absolute value as the negative sign denotes decrease in acceleration.

Thus;

Torque = 0.0234375 × 0.512

Torque = 0.012 N.m

If the magnetic field of an electromagnetic wave is in the +x-direction and the electric field of the wave is in the +y-direction, the wave is traveling in the

Answers

Answer:

The wave is travelling in the ±z-axis direction.

Explanation:

An electromagnetic wave has an oscillating magnetic and electric field. The electric and magnetic field both oscillate perpendicularly one to the other, and the wave travels perpendicularly to the direction of oscillation of the  electric and magnetic field.

In this case, if the magnetic field is in the +x-axis direction, and the electric field is in the +y-axis direction, we can say with all assurance that the wave will be travelling in the ±z-axis direction.

The highest mountain on mars is olympus mons, rising 22000 meters above the martian surface. If we were to throw an object horizontaly off the mountain top, how long would it take to reach the surface? (Ignore atmospheric drag forces and use gMars=3.72m/s^2

a. 2.4 minutes
b. 0.79 minutes
c. 1.8 minutes
d. 3.0 minutes

Answers

Answer:

  t = 1.81 min ,     the correct answer is c

Explanation:

This is a missile throwing exercise

The object is thrown horizontally, so its vertical speed is zero (voy = 0), let's use the equation

             y = y₀ + [tex]v_{oy}[/tex] t - ½ g t²

the final height is y = 0 and the initial height is y₀ = 22000 m

            0 = y₀ + 0 - ½ g t²

             

            t = √y 2y₀ / g

let's calculate

           t = √(2  22000 / 3.72)

           t = 108.76 s

let's reduce to minutes

           t = 108.76 s (1 min / 60 s)

           t = 1.81 min

The correct answer is c

Rank the following types of electromagnetic waves by the wavelength of the wave.

a. Microwaves
b. X-rays
c. Radio waves
d. Visible light

Answers

Explanation:

In order of Increasing Wavelength of the Electromagnetic Spectrum :

B) X rays

D) Visible light

A) Microwave

C) Radio Waves

Electromagnetic waves in order of decreasing wavelength  is X-rays,visible light,microwaves and radio waves.

What are electromagnetic waves?

The electromagnetic radiation consists of waves made up of electromagnetic field which are capable of propogating through space and carry the radiant electromagnetic energy.

The radiation are composed of electromagnetic waves which are synchronized oscillations of electric and magnetic fields . They are created due to change which is periodic in electric as well as magnetic fields.

In vacuum ,all the electromagnetic waves travel at the same speed that is with the speed of air.The position of an electromagnetic wave in an electromagnetic spectrum is characterized by it's frequency or wavelength.They are emitted by electrically charged particles which undergo acceleration and subsequently interact with other charged particles.

Learn more about electromagnetic waves,here:

https://brainly.com/question/3001269

#SPJ2

To get an idea of the order of magnitude of inductance, calculate the self-inductance in henries for a solenoid with 1500 loops of wire wound on a rod 13 cm long with radius 2 cm

Answers

Answer:

The self-inductance in henries for the solenoid is 0.0274 H.

Explanation:

Given;

number of turns, N = 1500 turns

length of the solenoid, L = 13 cm = 0.13 m

radius of the wire, r = 2 cm = 0.02 m

The self-inductance in henries for a solenoid is given by;

[tex]L = \frac{\mu_oN^2A}{l}[/tex]

where;

[tex]\mu_o[/tex] is permeability of free space = [tex]4\pi*10^{-7} \ H/m[/tex]

A is the area of the solenoid = πr² = π(0.02)² = 0.00126 m²

[tex]L = \frac{4\pi *10^{-7}(1500)^2*(0.00126)}{0.13} \\\\L = 0.0274 \ H[/tex]

Therefore, the self-inductance in henries for the solenoid is 0.0274 H.

Some stove tops are smooth ceramic for easy cleaning. If the ceramic is 0.630 cm thick and heat conduction occurs through an area of 1.45 ✕ 10−2 m2 at a rate of 500 J/s, what is the temperature difference across it (in °C)? Ceramic has the same thermal conductivity as glass and concrete brick.

Answers

Answer:

The temperature difference [tex]\Delta T = 258.6 \ ^ o\ C[/tex]

Explanation:

From the question we are told that

   The  thickness is [tex]\Delta x = 0.630 cm = 0.0063 m[/tex]

    The  area is  [tex]A = 1.45 *10^{-2 } \ m^2[/tex]

     The rate is  [tex]P = 500 J/s[/tex]

       The  thermal conductivity is  [tex]\sigma = 0.84J[\cdot s \cdot m \cdot ^oC ][/tex]

Generally the rate heat conduction mathematically represented as

       [tex]P = \sigma * A * \frac{\Delta T}{\Delta x }[/tex]

=>    [tex]\Delta T = \frac{P * \Delta x }{\sigma * A }[/tex]

=>     [tex]\Delta T = \frac{ 500 * 0.00630 }{ 0.84 * 1.45 *10^{-2} }[/tex]

=>    [tex]\Delta T = 258.6 \ ^ o\ C[/tex]

3. What are the first steps that you should take if you are unable to get onto the Internet? (1 point)
O Check your router connections then restart your router.
O Plug the CPU to a power source and reboot the computer.
O Adjust the display properties and check the resolution.
Use the Control Panel to adjust the router settings.​

Answers

Answer:

Check your router connections then restart your router.

Explanation:

Answer:

Check your router connections then restart your router.

Explanation:

Most internet access comes from routers so the problem is most likely the router.

Krishna and Seldon now try a homework problem. A policeman sitting in his unmarked police car sees an approaching motorcyclist go through a red light two blocks away. He turns on his siren at a frequency of 1000 Hz as the motorcyclist heads directly toward him at 61 mph (27.27 m/s). What frequency does the motorcyclist hear? (Enter your answer to at least the nearest integer. Assume the speed of sound in air is 331 m/s.) Hz What frequency does the motorcyclist hear when stopped with the police car approaching at 61 mph (27.27 m/s)? (Enter your answer to at least the nearest integer. Assume the speed of sound in air is 331 m/s.) Hz

Answers

Answer:

Explanation:

We shall apply formula of Doppler's effect

Here source is fixed and observer is approaching the source

f = f₀ x [(V + v ) / V ]

f₀ is original and f is apparent frequency , V is velocity of sound and v is velocity of motorcyclist .

f = 1000 x [(331 + 27.27 ) / 331 ]

= 1082 .4 Hz

This is the frequency heard by motorcyclist .

When police car is approaching him when he is stopped

f = f₀ x [V /(V - v ) ]

v is velocity of police car .

= 1000  x 331 / (331 - 27.27)

= 1090 Hz  

The positron has the same mass as an electron, with an electric charge of +e. A positron follows a uniform circular motion of radius 5.03 mm due to the force of a uniform magnetic field of 0.85 T. How many complete revolutions does the positron perform If it spends 2.30 s inside the field? (electron mass = 9.11 x 10-31 kg, electron charge = -1.6 x 10-19 C)

Answers

Answer:

5.465 × 10^10 revolutions

Explanation:

Formula for Magnetic Field = m. v/ q . r

M = mass of electron = mass of positron = 9.11 x 10^-31 kg,

radius of the positron = 5.03 mm

We convert to meters.

1000mm = 1m

5.03mm = xm

Cross multiply

x = 5.03/1000mm

x = 0.00503m

q = Electric charge = -1.6 x 10^-19 C

Magnetic field (B) = 0.85 T

Speed of the positron is unknown

0.85 = 9.11 x 10^-31 kg × v/ -1.6 x 10^-19 C × 0.00503

0.85 × 1.6 x 10^-19 C × 0.00503 = 9.11 x 10^-31 kg × v

v = 0.85 × -1.6 x 10^-19 C × 0.00503/9.11 x 10^-31 kg

v = 6.8408 ×10-22/ 9.11 x 10^-31 kg

v = 750911086.72m/s

Formula for complete revolutions =

Speed × time / Circumference

Time = 2.30s

Circumference of the circular path = 2πr

r =0.00503

Circumference = 2 × π × 0.00503

= 0.0316044221

Revolution = 750911086.72 × 2.30/0.0316044221

= 1727095499.5/0.0316044221

= 546541562294 revolutions

Approximately = 5.465 × 10^10 revolutions

What is the magnitude of the applied electric field inside an aluminum wire of radius 1.4 mm that carries a 4.5-A current

Answers

Answer:

Explanation:

From the question we are told that

    The radius is  [tex]r = 1.4 \ mm = 1.4 *10^{-3} \ m[/tex]

     The  current is  [tex]I = 4.5 \ A[/tex]

Generally the electric field is mathematically represented as

         [tex]E = \frac{J}{\sigma }[/tex]

Where [tex]\sigma[/tex] is the conductivity of  aluminum with value [tex]\sigma = 3.5 *10^{7} \ s/m[/tex]

J is the current density which mathematically represented as  

      [tex]J = \frac{I}{A}[/tex]

Here A is the cross-sectional area which is mathematically represented as  

       [tex]A = \pi r^2[/tex]

       [tex]A = 3.142 * (1.4*10^{-3})^2[/tex]

       [tex]A = 6.158*10^{-6} \ m^2[/tex]

So

    [tex]J = \frac{ 4.5 }{6.158*10^{-6}}[/tex]

    [tex]J = 730757 A/m^2[/tex]

So

       [tex]E = \frac{ 730757}{3.5*10^{7} }[/tex]

       [tex]E = 0.021 \ N/C[/tex]

A long bar slides on two contact points and is in motion with velocity ν. A steady, uniform, magnetic field B is present. The induced current through resistor R is:

Answers

Answer:

The induced current in the resistor is I = BLv/R

Explanation:

The induced emf ε in the long bar of length, L in a magnetic field of strength, B moving with a velocity, v is given by

ε = BLv.

Now, the current I in the resistor is given by

I = ε/R where ε = induced emf in circuit and R = resistance of resistor.

So, the current I = ε/R.

substituting the value of ε the induced emf, we have

I = ε/R

I = BLv/R

So, the induced current through the resistor is given by I = BLv/R

Light of wavelength 500 nm falls on two slits spaced 0.2 mm apart. If the spacing between the first and third dark fringes is to be 4.0 mm, what is the distance from the slits to a screen?

Answers

Answer:

L = 0.8 m

Explanation:

Since, the distance between first and third dark fringes is 4 mm. Therefore, the fringe spacing between consecutive dark fringes will be:

Δx = 4 mm/2 = 2 mm = 2 x 10⁻³ m

but,

Δx = λL/d

λ = wavelength of the light = 500 nm = 5 x 10⁻⁷ m

d = slit spacing = 0.2 mm = 0.2 x 10⁻³ m

L = Distance between slits and screen = ?

Therefore, using the values, we get:

2 x 10⁻³ m = (5 x 10⁻⁷ m)(L)/(0.2 x 10⁻³)

L = (2 x 10⁻³ m)(0.2 x 10⁻³ m)/(5 x 10⁻⁷ m)

L = 0.8 m

An unstable particle at rest spontaneously breaks into two fragments of unequal mass. The mass of the first fragment is 3.00 10-28 kg, and that of the other is 1.86 10-27 kg. If the lighter fragment has a speed of 0.844c after the breakup, what is the speed of the heavier fragment

Answers

Answer: Speed = [tex]3.10^{-31}[/tex] m/s

Explanation: Like in classical physics, when external net force is zero, relativistic momentum is conserved, i.e.:

[tex]p_{f} = p_{i}[/tex]

Relativistic momentum is calculated as:

p = [tex]\frac{mu}{\sqrt{1-\frac{u^{2}}{c^{2}} } }[/tex]

where:

m is rest mass

u is velocity relative to an observer

c is light speed, which is constant (c=[tex]3.10^{8}[/tex]m/s)

Initial momentum is zero, then:

[tex]p_{f}[/tex] = 0

[tex]p_{1}-p_{2}[/tex] = 0

[tex]p_{1} = p_{2}[/tex]

To find speed of the heavier fragment:

[tex]\frac{mu_{1}}{\sqrt{1-\frac{u^{2}_{1}}{c^{2}} } }=\frac{mu_{2}}{\sqrt{1-\frac{u^{2}_{2}}{c^{2}} } }[/tex]

[tex]\frac{1.86.10^{-27}u_{1}}{\sqrt{1-\frac{u^{2}_{1}}{(3.10^{8})^{2}} } }=\frac{3.10^{-28}.0.844.3.10^{8}}{\sqrt{1-\frac{(0.844c)^{2}}{c^{2}} } }[/tex]

[tex]\frac{1.86.10^{-27}u_{1}}{\sqrt{1-\frac{u^{2}_{1}}{(3.10^{8})^{2}} } }=1.42.10^{-19}[/tex]

[tex]1.86.10^{-27}u_{1} = 1.42.10^{-19}.{\sqrt{1-\frac{u^{2}_{1}}{(3.10^{8})^{2}} } }[/tex]

[tex](1.86.10^{-27}u_{1})^{2} = (1.42.10^{-19}.{\sqrt{1-\frac{u^{2}_{1}}{(3.10^{8})^{2}} } })^{2}[/tex]

[tex]3.46.10^{-54}.u_{1}^{2} = 2.02.10^{-38}.(1-\frac{u_{1}^{2}}{9.10^{16}} )[/tex]

[tex]3.46.10^{-54}.u_{1}^{2} = 2.02.10^{-38} -[2.02.10^{-38}(\frac{u_{1}^{2}}{9.10^{16}} )][/tex]

[tex]3.46.10^{-54}.u_{1}^{2} = 2.02.10^{-38} -2.24.10^{-23}.u^{2}_{1}[/tex]

[tex]3.46.10^{-54}.u_{1}^{2}+2.24.10^{-23}.u^{2}_{1} = 2.02.10^{-38}[/tex]

[tex]2.24.10^{-23}.u^{2}_{1} = 2.02.10^{-38}[/tex]

[tex]u^{2}_{1} = \frac{2.02.10^{-38}}{2.24.10^{-23}}[/tex]

[tex]u_{1} = \sqrt{9.02.10^{-62}}[/tex]

[tex]u_{1} = 3.10^{-31}[/tex]

The speed of the heavier fragment is [tex]u_{1} = 3.10^{-31}[/tex]m/s.

How much work is needed to pump all the water out of a cylindrical tank with a height of 10 m and a radius of 5 m

Answers

Answer:

Explanation:

volume of water being lifted

= π r² h , where r is radius of cylinder and h is height of cylinder

= 3.14 x5² x 10

= 785 m³

mass of water = 785 x 10³ kg

mass of this much of water is lifted so that its centre of mass is lifted by height

10 / 2 = 5m .

So work done = mgh , m is mass of water , h is displacement of centre of mass and g is acceleration due to gravity

= 785 x 10³ x 9.8 x 5

= 38.465 x 10⁶ J  

In a double-slit experiment the distance between slits is 5.0 mm and the slits are 1.4 m from the screen. Two interference patterns can be seen on the screen: one due to light of wavelength 450 nm, and the other due to light of wavelength 590 nm. What is the separation in meters on the screen between the m = 5 bright fringes of the two interference patterns?

Answers

Answer:

 Δy = 1 10⁻⁴ m

Explanation:

In double-slit experiments the constructive interference pattern is described by the equation

           d sin θ = m λ

In this case we have two wavelengths, so two separate patterns are observed, let's use trigonometry to find the angle

         tan θ = y / L

as the angles are small,

         tan θ = sin θ / cos θ = sin θ

substituting

         sin θ = y / L

         d y / L = m λ

         y = m λ / d L

let's apply this formula for each wavelength

λ = 450 nm = 450 10⁻⁹ m

m = 5

d = 5.0 mm = 5.0 10⁻³ m

      y₁ = 5 450 10⁻⁹ / (5 10⁻³  1.4)

      y₁ = 3.21 10⁻⁴ m

we repeat the calculation for lam = 590 nm = 590 10⁻⁹ m

      y₂ = 5 590 10⁻⁹ / (5 10⁻³  1.4)

      y₂=  4.21 10⁻⁴ m

the separation of these two lines is

        Δy = y₂ - y₁

        Δy = (4.21 - 3.21) 10⁻⁴ m

        Δy = 1 10⁻⁴ m

When a mercury thermometer is heated, the mercury expands and rises in the thin tube of glass. What does this indicate about the relative rates of expansion for mercury and glass

Answers

Answer:

This means that mercury has a higher or faster expansion rate than glass

Explanation:

This is because When a container expands, the reservoir in the glass expands at the same rate as the glass. Thus, if there is something in a glass and both expand at the same rate, they have no change - but if the contents expand faster, they will fill the container to a higher level, and if the contents expand slower, they will fill the container to a lower level (relative to the new size of the container).

If Superman really had x-ray vision at 0.12 nm wavelength and a 4.1 mm pupil diameter, at what maximum altitude could he distinguish villains from heroes, assuming that he needs to resolve points separated by 5.4 cm to do this?

Answers

Answer:

Maximum altitude to see(L) =  1.47 × 10⁶ m (Approx)

Explanation:

Given:

wavelength (λ) = 0.12 nm = 0.12 × 10⁻⁹ m

Pupil Diameter (d) = 4.1 mm = 4 × 10⁻³ m

Separation distance (D) = 5.4 cm = 0.054 m

Find:

Maximum altitude to see(L)

Computation:

Resolving power = 1.22(λ / d)

D / L = 1.22(λ / d)

0.054 / L = 1.22 [(0.12 × 10⁻⁹) / (4 × 10⁻³ m)]

0.054 / L = 1.22 [0.03 × 10⁻⁶]

L = 0.054 / 1.22 [0.03 × 10⁻⁶]

L = 0.054 / [0.0366 × 10⁻⁶]

L = 1.47 × 10⁶

Maximum altitude to see(L) =  1.47 × 10⁶ m (Approx)

The number of daylight hours, D, in the city of Worcester, Massachusetts, where x is the number of days after January 1 (), may be calculated by the function: What is the period of this function? N/A What is the amplitude of this function? 12 What is the horizontal shift? What is the phase shift? What is the vertical shift? How many hours of sunlight will there be on February 21st of any year?

Answers

Answer:

a. 365; b. 3; c. 78; d. 1.343 rad; e. 12; f. 10.66

Explanation:

Assume that the function is

[tex]D(x) = 3 \sin \left (\dfrac{2\pi}{365}(x - 78) \right ) + 12[/tex]

The general formula for a sinusoidal function is

      y = A sin(B(x - C))+ D

   |A| = amplitude

     B = frequency

2π/B = period, P

     C = horizontal shift (phase shift)

     D = vertical shift

By comparing the two formulas, we find

|A| = 3

 B = 2π/365

 C = 78

 D = 12

a. Period

P = 2π/B = 2π/(2π/365) = 2π × 365/2π = 365

The period is 365.

b. Amplitude

|A| = 3

The amplitude is 3.  

c. Horizontal shift

C= 78

The horizontal shift is 78.

d. Phase shift  (φ)

Ths phase shift is the horizontal shift expressed in radians.

φ = C × 2π/365 = 78 × 2π/365 ≈ 1.343

The phase shift is 1.343 rad.

e. Vertical shift

D = 12

The vertical shift is 12.

f. Hours of sunlight on Feb 21

Feb 21 is the 52nd day of the year, so x = 51 (the number of days after Jan 1),

[tex]\begin{array}{rcl}D(x) &=& 3 \sin \left (\dfrac{2\pi}{365}(x - 78) \right ) + 12\\\\&=& 3 \sin (0.01721(51 - 78) ) + 12\\&=& 3\sin(-0.4648) + 12\\&=& 3(-0.4482) + 12\\\&=& -1.345 + 12\\& = & \textbf{10.66 h}\\\end{array}[/tex]

There will be 10.66 h of sunlight on Feb 21 of any given year.

The figure below shows the graph of the function from 0 ≤ x ≤ 365.

Matter's resistance to a change in motion is called _____ and is directly proportional to the mass of an object

Answers

Answer:

Matter's resistance to a change in motion is called INERTIA and is directly proportional to the mass of an object.

Explanation:

The sun generates both mechanical and electromagnetic waves. Which statement about those waves is true?
OA. The mechanical waves reach Earth, while the electromagnetic waves do not.
OB. The electromagnetic waves reach Earth, while the mechanical waves do not.
OC. Both the mechanical waves and the electromagnetic waves reach Earth.
OD. Neither the mechanical waves nor the electromagnetic waves reach Earth.

Answers

Answer: The correct answer for this question is letter (B) The electromagnetic waves reach Earth, while the mechanical waves do not. The sun generates both mechanical and electromagnetic waves. Space, between the sun and the earth is a nearly vacuum. So mechanical wave can not spread out in the vacuum.

Hope this helps!

Answer:

The electromagnetic waves reach Earth, while the mechanical waves do not

Other Questions
if you could be any animal what would you be and why 11. Find the slope of the following coordinate points: (11,4)and (5.-3) Given that f(x)=2x+1 and g(x)=-5x+2 slice for f(g(x)) when x=3? find the interest rate r when p = 800, a = 2700, and t = 3. Which of the following is equivalent to 2i(6 7i)? I have no chair, no church, no philosophy, I lead no man to a dinner-table, library, exchange, But each man and each woman of you I lead upon a knoll, My left hand hooking you round the waist, My right hand pointing to landscapes of continents and the public road. Which statement best describes how these lines reflect the theme of the poem? Define enlightenment A. found of Buddhism B. wisdom C. the Buddha's word for release from selfishness and pain D. Nirvana Please answer quickly i will give you brainliest if its correct- it has to be a simplified fraction please Can someone help me with this? Does it mean cup or is it a typo? Also I need help with the answer. How does the middle row of panels help develop the central idea of this page? How could the notion of maximum parsimony lead to an error in establishing an evolutionary relationship A__________produces finished-goods inventory in advance of customer demand using a forecast of sales. In the nation of Gondor, the EPA requires that half the new cars sold will meet a certain particulate emission standard a year later. A sample of 64 one-year-old cars revealed that only 24 met the particulate emission standard. The test statistic to see whether the proportion is below the requirement is Please HelpA skydiver jumps out of a hovering helicopter, so there is no forward velocity. Use this information to answer questions. Ignore wind resistance for this exercise. 3. What is the skydiver's velocity after one second? Show your work and include direction. Explain the major events in Lincolns presidency and his actions / impact on the Civil War Convert 7,348 grams to kilograms A poker hand consisting of 7 cards is dealt from a standard deck of 52 cards. Find the probability that the hand contains exactly 3 face cards. Leave your answer as a reduced fraction. A company knows that if it sets the price of a product at p dollars, the number of units sold will be x million, where p = 2 - x. If the cost of the product is given by 0.25 + 0.5x million dollars. What price should be set to make a profit of $ 0.25 million? A chemist must dilute 55.6 ml of 1.48 M aqueous silver nitrate (AgNO3)solution until the concentration falls to 1.00 M. He'll do this by adding distilled water to the solution until it reaches a certain final volume. Calculate this final volume, in milliliters. Round your answer to 3 significant digits. 3. How many bytes of storage space would be required to store a 400-page novel in which each page contains 3500 characters if ASCII were used? How many bytes would be required if Unicode were used? Represent the answer in MB