Answer:
$0.19 per direct labor hour
Explanation:
It is important to keep in mind the following :
Overhead application rate = Budgeted Overheads ÷ Budgeted Activity
also,
Applied Overheads = Overhead application rate x Actual Activity
Using the formula :
Applied Overheads = Overhead application rate x Actual Activity
hence,
Overhead application rate = Applied Overheads ÷ Actual Activity
therefore,
Overhead application rate = $6,500 ÷ $35,000
= $0.185 or $0.19 per direct labor hour
A company is designing a product layout for a new product. It plans to use this production line eight hours a day in order to meet projected demand of 480 units per day. The tasks necessary to produce this product are:
Answer:
1. The correct option is C. 54.
2. The correct option is E. 60.
3. The correct option is A. 3.
4. The correct option is E. 90%.
5. The correct option is E. y.
Explanation:
Note: This question is not complete. The complete question is therefore provided before answering the question as follows:
A company is designing a product layout for a new product. It plans to use this production line eight hours a day in order to meet projected demand of 480 units per day. The tasks necessary to produce this product:
Task Time (sec) Immediate Predecessor
u 30 none
v 30 u
w 6 u
x 12 w
y 54 x
z 30 v, y
1. Without regard to demand, what is the minimum possible cycle time (in seconds) for this situation?
A. 162
B. 72
C. 54
D. 12
E. 60
2. If the company desires that output rate equal demand, what is the desired cycle time (in seconds)?
A. 162
B. 72
C. 54
D. 12
E. 60
3. If the company desires that output rate equal demand, what is the minimum number of workstations needed?
A. 3
B. 4
C. 5
D. 6
E. 7
4. If the company desires that output rate equal demand, what would be the efficiency of this line with the minimum number of workstations?
A. 100%
B. 92.5%
C. 75%
D. 87.5%
E. 90%
5. If the company desires that output rate equal demand, what is the last task performed at the second workstation in the balance which uses the minimum number of workstations?
A. u
B. v
C. w
D. x
E. y
The explanation of the answers is now provided as follows:
1. Without regard to demand, what is the minimum possible cycle time (in seconds) for this situation?
The minimum cycle time is equal to the maximum task time. From the data in the question, it can be seen that the maximum task time is 54. Therefore, the correct option is C. 54. That is, the minimum possible cycle time (in seconds) for this situation is 54.
2. If the company desires that output rate equal demand, what is the desired cycle time (in seconds)?
Desired cycle time (in seconds) = Demand rate / Number of hours per days = 480 / 8 = 60
Therefore, the correct option is E. 60.
3. If the company desires that output rate equal demand, what is the minimum number of workstations needed?
Total task time = 30 + 30 + 6 + 12 + 54 + 30 = 162
Minimum possible cycle time = 54
Therefore, we have:
Minimum number of workstations needed = Total task time / Minimum possible cycle time = 162 / 54 = 3
Therefore, the correct option is A. 3.
4. If the company desires that output rate equal demand, what would be the efficiency of this line with the minimum number of workstations?
Line efficiency = Total task time / (Minimum number of workstations needed * Desired cycle time) = 162 / (3 * 60) = 162 / 180 = 0.90, or 90%
Therefore, the correct option is E. 90%.
5. If the company desires that output rate equal demand, what is the last task performed at the second workstation in the balance which uses the minimum number of workstations?
The last task should be the one has the longest task time. From the data table in the question, it can be observed that y is the task that has the longest task time. This implies y is the task to perform last.
Therefore, the correct option is E. y.
Cheetah Copy purchased a new copy machine. The new machine cost $100,000 including installation. The company estimates the equipment will have a residual value of $25,000. Cheetah Copy also estimates it will use the machine for four years or about 8,000 total hours. Actual use per year was as follows:
Year Hours Used
1 3,000
2 2,000
3 1,200
4 2,800
Required:
Prepare a depreciation schedule for four years using the straight-line method.
Answer:
Results are below.
Explanation:
Giving the following information:
Purchase price= $100,000
Salvage value= $25,000
Useful life= 4 years
To calculate the annual depreciation, we need to use the following formula:
Annual depreciation= (original cost - salvage value)/estimated life (years)
Annual depreciation= (100,000 - 25,000) / 4
Annual depreciation= $18,750
Year 1:
Annual depreciation= 18,750
Accumulated depreciation= 18,750
Book value= 100,000 - 18,750= 81,250
Year 2:
Annual depreciation= 18,750
Accumulated depreciation= 18,750*2= 37,500
Book value= 100,000 - 37,500= 62,500
Year 3:
Annual depreciation= 18,750
Accumulated depreciation= 18,750*3= 56,250
Book value= 100,000 - 56,250= 43,750
Year 4:
Annual depreciation= 18,750
Accumulated depreciation= 18,750*4= 75,000
Book value= 100,000 - 75,000= 25,000
answered - expert verified
changing role of women in the past 25 year
relating to joint families . nuclear families
women as a bread earner of the family.
changes in the requirement trend of mixers.
washing machines , micro wave and standard
of living
SEE ANSWERS
expert ithegrhrhrrhhehrhhrhrgegrgrhrhbbenehehhe
Answer:
hloooooooooooooooooooooooooooooooo
what are the four characteristics of bussiness negotiation
Answer: ability to express thoughts precisely
integrity is the most important characteristics
having a listening skill
voluntary communication where no one is forced to have this negotiation
Explanation:
What are the process of microeconomics?
Answer:
Microeconomics is the study of what is likely to happen (tendencies) when individuals make choices in response to changes in incentives, prices, resources, and/or methods of production. Individual actors are often grouped into microeconomic subgroups, such as buyers, sellers, and business owners.
Explanation:
A local moving company has collected data on the number of moves they have been asked to perform over the past three years.Moving is highly seasonal,so the owner/operator,who is both burly and highly educated,decides to apply the multiplicative seasonal method (based on a linear regression for total demand)to forecast the number of customers for the coming year.What is his forecast for each quarter?
Year 1 Year 2 Year 3
Quarter Demand Quarter Demand Quarter Demand
1 20 1 27 1 33
2 40 2 45 2 45
3 45 3 55 3 55
4 30 4 40 4 40
Answer:
NO SE
Explanation:
________ controls cover security processes that are designed by strategic planners and implemented by the security administration of the organization. a. Operational b. Informational c. Technical d. Managerial
Answer:
d. Managerial
Explanation:
The managerial controls covers the process of the security that could be designed via strategic planners and the same should be implemented via the organization security administration
So as per the given situation, the option d is correct
And, the rest of the options are incorrect
The same should be relevant
s borrows $12,000 for a shortterm purpose. The loan will be repaid after 120 days, with Simpson paying a total of $12,400. What is the approximate cost of credit using the APR, or annual percentage rate, calcula
Answer:
the approximate cost of credit using the APR, or annual percentage rate is 10.34%
Explanation:
The computation is shown below:
Interest Paid should be
= $12,400 - $12,000
= $400
Now
Cost of capital for 120 days is
= $400 ÷ 12000
= 3.33%
And, finally
Annual percentage rate is
= 3.33% × 365 ÷ 120
= 10.34%
Hence, the approximate cost of credit using the APR, or annual percentage rate is 10.34%
A quality control activity analysis indicated the following four activity costs of a hotel:
Inspecting cleanliness of rooms $49,300
Processing lost customer reservations 98,600
Rework incorrectly prepared room service meal 246,500
Employee training 98,600
Total $493,000
Sales are $2,900,000. Prepare a cost of quality report. Round percent of sales to one decimal place.
The Cost of Quality Report is as follows:
Quality Cost Quality Percentage of Percentage of
Classification Cost Quality Cost Total Sales
Prevention $98,600 20% ($98,600/$493,000) 3.4%
Appraisal 49,300 10% ($49,300/$493,000) 1.7%
Internal Failure 246,500 50% ($246,500/$493,000) 8.5%
External Failure 98,600 20% ($98,600/$493,000) 3.4%
Total Quality Costs $493,000 100% 17.0%
Data and Calculations:
Inspecting cleanliness of rooms $49,300 (Appraisal)
Processing lost customer reservations 98,600 (External failure)
Rework incorrectly prepared room service meal 246,500 (Internal failure)
Employee training 98,600 (Prevention)
Total $493,000
Sales $2,900,000
Percentage of Quality Cost = Quality Cost/Total Quality Cost * 100
Percentage of Total Sales = Quality Cost/Total Sales * 100
Thus, the cost of quality report is an appraisal of how the hotel uses its resources to prevent poor quality, including its internal and external failures.
Learn more about cost of quality report here: https://brainly.com/question/23775957
Randel Manufacturing has five activity cost pools and two products (a budget tape vacuum and a deluxe tape vacuum). Information is presented below:
Cost Drivers by Product Activity Cost Pool Ordering and Receiving Machine Setup Machinine Assembly Inspection Cost Driver Estimated Overhead Budget Deluxe $130,000 Orders Setups Machine hours Parts 400 400 150,000 100,000 600 297,000 500 1,000,000 600,000 1,200,000 800,000 300,000 550 450
Compute the overhead cost per unit for each product. Production is 700,000 units of Budget and 200,000 units of Deluxe. (Round overhead cost per unit to 2 decimal places, eg. 12.25 and cost assigned to O decimal places, eg. 2,500)
Overhead cost per unit
Budget S per unit
Deluxe $ per unit
Answer:
Randel Manufacturing
Overhead cost per unit
Budget $2.81 per unit
Deluxe $6.80 per unit
Explanation:
a) Data and Calculations:
Cost Drivers by Product
Activity Cost Pool Cost Driver Estimated Budget Deluxe
Overhead
Ordering and Receiving Orders $130,000 600 400
Machine Setup Setups 297,000 500 400
Machining Machine hours 1,000,000 150,000 100,000
Assembly Parts 1,600,000 1,200,000 800,000
Inspection Inspections 300,000 550 450
Cost Pool Overhead Rates
Ordering and Receiving $130 ($130,000/1,000) per order
Machine Setup $330 ($297,000/900) per setup
Machining $4 ($1,000,000/250,000) per machine hour
Assembly $0.80 ($1,600,000/2,000,000) per part
Inspection $300 ($300,000/1,000) per inspection
Estimated Rates Budget Deluxe
Overhead
Ordering and Receiving $130 $78,000 $52,000
Machine Setup $330 165,000 132,000
Machining $4 600,000 400,000
Assembly $0.80 960,000 640,000
Inspection $300 165,000 135,000
Total overhead costs $1,968,000 $1,359,000
Production units 700,000 200,000
Overhead per unit $2.81 $6.80
We are in a world with a real interest rate of 7%. The economy of Smoothiland is hit by a temporary shock to GDP of 200 million units at time T. The population of Smoothiland have a strong preference for consumption smoothing, and Smoothiland has an open economy.
1. By how much does consumption to fall in time T+1? (in millions, round to the closes decimal).
2. How much does the country have to borrow to maintain smooth consumption? (round to the closest decimal)
Answer:
1. 14.28 million units
2. The country has to borrow 200 million in order to maintain smooth consumption
Explanation:
1. Real interest rate = 7%
Temporary shock to GDP(Y) at Time(T)
= 200 million
Fall of consumption (T) in time T+1 =
So,
Y= C+rY
200=C+(0.07*200)
= C + 14
C = 200/14
= 14.28
Therefore,
Consumption will fall by 14.28 million units
2. The country has to borrow 200 million in order to maintain smooth consumption
Information technology has been used to improve both internaland external access and sharing of information. Three main kinds ofinformation technology allow access and sharing of informationinternally among employees: executive information systems,intranets, and portals.
For each description in the following table, identify thecorresponding information technology.
Description Executive Information System Intranet Corporate Portal
1. Helps managers monitor and analyze organizationalperformance
2. A hybrid system that uses a web address to give employeesaccess to customized information and specialized transactions
3. An internal company network that provides employees witheasy access to information
Answer:
1. Executive Information System (EIS).
2. Corporate Portal.
3. Intranet.
Explanation:
Information technology (IT) can be defined as a set of components or computer systems, which is used to collect, store, and process data, as well as dissemination of information, knowledge, and distribution of digital products.
An information technology (IT) interacts with its environment by receiving data in its raw forms and information in a usable format.
Information technology (IT) has significantly helped to improve both internal and external access and sharing of information between two or more business firms and individuals. Basically, there are three (3) main kinds of information technology (IT) which allow informations to be accessed and shared internally among employees; executive information systems (EIS), intranets, and portals.
1. Executive Information System (EIS): it assist managers working in an organization to monitor and analyze organizational performance. An Executive information system is also referred to as an Executive support system and it can be defined as a management support system that enhances and supports all of the senior executive information and decision-making process.
2. Corporate Portal: it's a hybrid system that uses a web address (uniform resource locator-URL) to give employees access to customized information and specialized transactions with respect to an organization.
3. Intranet: it's an internal company network which is private and provides employees with easy access to information.
Yard Tools manufactures lawnmowers, weed-trimmers, and chainsaws. Its sales mix and unit contribution margin are as follows.
Sales Mix Unit Contribution Margin
Lawnmowers 20% $33
Weed-trimmers 50% $21
Chainsaws 30% $37
Yard Tools has fixed costs of $4,200,000.
Required:
Compute the number of units of each product that Yard Tools must sell in order to break even under this product mix.
Answer:
Lawnmowers’ break-even point in units = 29,787 units
Weed-trimmers’ break-even point in units = 74,468 units
Chainsaws' break-even point in units = 44,681 unit
Explanation:
Given:
Sales Mix Unit Contribution Margin
Lawnmowers 20% $33
Weed-trimmers 50% $21
Chainsaws 30% $37
The number of units of each product that Yard Tools must sell in order to break even under this product mix can be computed using Weighted-Average Contribution Margin Ratio as follows:
Weighted contribution margin = (Sales Mix of Lawnmowers * Unit Contribution Margin of Lawnmowers) + (Sales Mix of Weed-trimmers * Unit Contribution Margin of Weed-trimmers) + (Sales Mix of Chainsaws * Unit Contribution Margin of Chainsaws) = (20% * $33) + (50% * $21) + (30% * $37) = $28.20
Total break-even point in units for the company = Fixed cost / Weighted contribution margin = $4,200,000 / $28.20 = 148,936 units
Therefore, we have:
Lawnmowers’ break-even point in units = Sales Mix of Lawnmowers * Total break-even point in units for the company = 20% * 148,936 = 29,787 units
Weed-trimmers’ break-even point in units = Sales Mix of Weed-trimmers * Total break-even point in units for the company = 50% * 148,936 = 74,468 units
Chainsaw’s break-even point in units = Sales Mix of Chainsaws * Total break-even point in units for the company = 30% * 148,936 = 44,681 units
Crimson Tide Music Academy offers lessons in playing a wide range of musical instruments. The unadjusted trial balance as of December 31, 2021, appears below. December 31 is the company's fiscal year-end.
Accounts Debits Credits
Cash $ 10,300
Accounts Receivable 9,500
Supplies 2,000
Prepaid Rent 7,200
Equipment 90,000
Accumulated Depreciation $ 12,000
Accounts Payable 7,700
Salaries Payable 0
Interest Payable 0
Utilities Payable 0
Notes Payable 20,000
Common Stock 45,000
Retained Earnings 19,000
Service Revenue 42,200
Salaries Expense 24,500
Interest Expense 0
Rent Expense 0
Supplies Expense 0
Utilities Expense 2,400
Depreciation Expense 0
Totals $ 145,900 $ 145,900
Information necessary to prepare the year-end adjusting entries appears below.
a. Depreciation of equipment for the year is $6,000.
b. Accrued salaries at year-end should be $2,100.
c. Crimson Tide borrows $20,000 on September 1, 2018. The principal is due to be repaid in four years. Interest is payable each August 31 at an annual rate of 12%.
d. Unused supplies at year-end total $700. Crimson Tide debits Supplies at the time supplies are purchased.
e. Crimson Tide opens a second studio by paying for one year of rent in advance on April 1, 2018, for $7,200 ($600 per month) debiting Prepaid Rent.
f. Unpaid utilities for December total $200.
Required:
1) Enter the unadjusted balances from the trial balance and post the adjusting entries to the T-accounts, and post the closing entries to the T-accounts.
2) prepare an adjusted trial balance.
3a ) prepare an income statement for the year end december 31,2018.
3b) prepare a statement of sharholders equity for the year ended decmber 31,2018.
3c) prepare a classified balance sheet for the year ended december 31, 2018.
4) record the closing entries.
5) prepare a post-closing trial balance.
Answer:
asdasd sadad asd asdas 2 212 313135 54 554 dsa asd sad asa sd
Explanation:
Cost of Goods Sold, Cost of Goods Manufactured
Glenville Company has the following information for April:
Cost of direct materials used in production $41,000
Direct labor 47,000
Factory overhead 20,000
Work in process inventory, April 1 34,000
Work in process inventory, April 30 27,000
Finished goods inventory, April 1 24,000
Finished goods inventory, April 30 18,000
a. For April, determine the cost of goods manufactured. Using the data given, prepare a statement of Cost of Goods Manufactured.
b. For April, determine the cost of goods sold. Using the data given, prepare a statement of Cost of Goods Sold.
Answer and Explanation:
a. The preparation of the statement of Cost of Goods Manufactured is presented below:
Work in process inventory, April 1 34,000
Add:
Cost of direct materials used in production $41,000
Direct labor 47,000
Factory overhead 20,000
Less:
Work in process inventory, April 30 27,000
Cost of goods manufactured $115,000
b. The preparation of the statement of Cost of Goods Sold is presented below:
Finished goods inventory, April 1 24,000
Add: cost of goods manufactured $115,000
Less: Finished goods inventory, April 30 18,000
Cost of goods sold $121,000
Samir is a self-employed marketing consultant. He had no income from January through March 2020. His April through December 2020 income subject to SE tax is $55,000.
Samir's SE tax for 2020 is $7,771 [$55,000 x 0.9235 x 0.153 = $7,771]. Samir may reduce his estimated tax payments by how much? Hint: USE Form Schedule SE to help you find the answer.
Answer:
$3,886
Explanation:
Since SELF EMPLOYMENT TAX is 15.3% of your wages which is why the Internal Revenue Service (IRS) make it possible for you to deduct your employer equal portion of your self employment taxes that the employer pays during the year which is 7.65% Calculated as (15.3%/2) which therefore means that Samir may reduce his ESTIMATED TAX PAYMENTS by $3,886 [$55,000 x 0.9235 x 0.0765 = $3,886] while the remaining 7.65%( 15.3% -7.65%) are not deductible because they correspond to employee taxes.
Therefore he may reduce his ESTIMATED TAX PAYMENTS by $3,886.
If a business adopts a low-cost strategy, it should build a supply chain with ________. Question 43 options: 1) product development skills 2) modular design in products 3) fast transportation 4) buffer stock 5) minimized inventory
Answer:
5) minimized inventory
Explanation:
If a company adopts a low-cost strategy, it must build a supply chain with minimized inventory, which configures that the company is adopting a just-in-time management strategy, which is an administration system whose philosophy is a production system according to demand, avoiding wasted stock and, consequently, unnecessary costs.
If a business adopts a low-cost strategy, it should build a supply chain with 5)minimized inventory.
What is a low-cost strategy?
A pricing strategy in which an employer offers a surprisingly low rate to stimulate the call for and benefit marketplace proportion.
How would you select the right supply chain strategy?Awareness on whether or not your organization offerings a client base that wishes immediate transport of product, or one wherein customers keep in mind that a lead time regularly accompanies their buy order. understand the effect of competition and whether or not maintaining safety stock is important to remain income.
Learn more about low-cost strategy here: https://brainly.com/question/27961763
#SPJ2
The contribution margin format income statement: Multiple Choice is most frequently used for financial statement reporting purposes. uses a behavior pattern classification for costs rather than a functional cost classification approach. emphasizes that all costs change in proportion to any change in revenues. results in a larger amount of operating income than the traditional income statement format.
Answer: uses a behavior pattern classification for costs rather than a functional cost classification approach.
Explanation:
The behavioral pattern of a cost refers to its relationship with the volume of production or sales. Costs that change along with the volume of production or sales are termed "variable costs" and costs that do not change are termed "fixed costs".
The Contribution Margin income statement classifies costs by whether they are variable or fixed which is why it is said that the format uses a behavioral for cost classification pattern not a functional one.
During a risk brainstorming session a team member identifies a risk. This particular risk does not seem to belong to any of the categories in you Risk Breakdown Structure (RBS). How should you respond
Answer:
Record it in the risk register, discuss potential responses and make a note to update the RBS.
Explanation:
Risk management is the process by which the management of an organisation identifies, assessed, and controls threats that may affect the company's capital or earnings.
The risks can be as a result of natural disasters, management error, financial uncertainty, or accidents.
In the given instance if a risk is not on any of the categories in you Risk Breakdown Structure (RBS), there is need to record it in the risk register, discuss potential responses and make a note to update the RBS.
Indy Company has the following data for one of its manufacturing plants:
Maximum units produced in a quarter (3-month period): 250,000 units
Actual units produced in a quarter (3-month period): 204,000 units
Productive hours in one quarter: 25,000 hours
Actual cycle time: 7.35 minutes
Theoretical cycle time: 6 minutes
Required:
1. Calculate the amount of processing time and the amount of nonprocessing time. If required, round your answers to two decimal places.
Processing time minutes
Nonprocessing time minutes
2. Calculate the MCE. If required, round your answer to nearest whole number. %
Answer:
1. Processing time:
Processing time = Theoretical time
Processing time is there for 6 minutes
Non processing time = Actual cycle time - processing time
= 7.35 - 6
= 1.35 minutes
2. Manufacturing Cycle Efficiency (MCE):
= Processing time / Actual cycle time
= 6 / 7.35
= 81.6%
When Matt has an income of $2,000, he consumes 30 units of good A and 50 units of good B. After Matt's income increases to $3,000, he consumes 25 units of good A and 95 units of good B. Which of the following statements is correct?
a. Both goods A and B are normal goods.
b. Both goods A and B are inferior goods.
c. Good A is a normal good, and good B is an inferior good.
d. Good A is an inferior good, and good B is a normal good.
Answer:
onoooooo seeeeeeeeeeeeeeeeeeeeeeeeeeeeee
When Matt has an income of $2,000, he consumes 30 units of good A and 50 units of good B. After Matt's income increases to $3,000, he consumes 25 units of good A and 95 units of good B. Good A is a normal good, and good B is an inferior good is the correct statement. Option C is the correct answer.
A normal good is a type of good for which demand increases as income increases. In this scenario, as Matt's income increases from $2,000 to $3,000, his consumption of good A decreases from 30 units to 25 units. This indicates an inverse relationship between his income and the quantity of good A consumed, suggesting that good A is a normal good. Option C is the correct answer.
On the other hand, an inferior good is a type of good for which demand decreases as income increases. In this case, as Matt's income increases, his consumption of good B increases from 50 units to 95 units. This suggests a positive relationship between his income and the quantity of good B consumed, indicating that good B is an inferior good.
Learn more about Income here:
https://brainly.com/question/30157678
#SPJ2
On March 31 a company needed to estimate its ending inventory to prepare its first quarter financial statements. The following information is available:
Beginning inventory, January 1: $5000
Net sales: $79,000
Net purchases: $77,000
The company's gross margin ratio is 20%. Using the gross profit method, the estimated ending inventory value would be:_____.
A) $18,800.
B) $82,000.
C) $15,800.
D) $63,200.
E) $15,400.
Denny Corporation is considering replacing a technologically obsolete machine with a new state-of-the-art numerically controlled machine. The new machine would cost $130,000 and would have a ten-year useful life. Unfortunately, the new machine would have no salvage value. The new machine would cost $16,000 per year to operate and maintain, but would save $46,000 per year in labor and other costs. The old machine can be sold now for scrap for $13,000. The simple rate of return on the new machine is closest to (Ignore income taxes.):
Answer:
The simple rate of return on the new machine is closest to 14.53%.
Explanation:
Assuming a straight-line depreciation method, we have:
Annual deprecation = Cost of the new machine / Useful life = $130,000 / 10 = $13,000
Net annual benefit = Annual saving - Annual operating and maintenance cost - Annual deprecation = $46,000 - $16,000 - $13,000 = $17,000
Net investment = Cost of the new machine - Scrap value of the old machine = $130,000 - $13,000 = $117,000
Simple rate of return on the new machine = Net annual benefit / Net investment = $17,000 / $117,000 = 0.1453, or 14.53%
Therefore, the simple rate of return on the new machine is closest to 14.53%.
ased on a predicted level of production and sales of 22,000 units, a company anticipates total variable costs of $99,000, fixed costs of $30,000, and operating income of $36,000. Based on this information, the budgeted amount of operating income for 20,000 units would be:
Answer:
$142,000
Explanation:
Sales of 22,000 units
Total variable costs is $99,000
The fixed cost is 30,000
Operating income $36,000
Therefore budgeted amount for 20,000 units can be calculated as follows
= 99,000+30,000+36,000
= 156,000
The selling percentage is
=156,000/22,000
= 7.1
7.1× 20,000
= 142,000
Hence the bugected anou t for 30,000 units $142,000
A conservative customer is invested in a large-cap, value-managed equity fund. The stock market drops 10% due to a poor economic forecast for the country. Your customer is upset that his conservative mutual fund lost almost as much as the stock market. What risks does your customer need to understand?
Answer:
1. Market risk
2. Systematic risk
Explanation:
Considering the situation described in the question above, my customer should understand the following risks:
1. Market risk: this is the probability that an investor will undergo losses as a result of circumstances that affect the all-around performance of investments in the financial markets.
2. Systematic risk: this is the type of risk that investors experience loss of some of their principal as a result of price volatility in the overall market which may be attributed to any of the economic, political, or social factors, but beyond the company's control.
Dye Trucking raised $240 million in new debt and used this to buy back stock. After the recap, Dye's stock price is $7. If Dye had 55 million shares of stock before the recap, how many shares does it have after the recap
Answer: 20,714,286 shares
Explanation:
Find out the number of shares that was repurchased:
= Amount raised / stock price
= 240,000,000 / 7
= 34,285,714 shares
Number of shares after recap:
= Number of shares before recap - Shares repurchased
= 55,000,000 - 34,285,714
= 20,714,286 shares
Louis Vuitton decides to invest $80,000,000 into a shoe factory in Milan from its money market account. The money market account was earning 1% in interest per year or $800,000. Louis Vuitton could have also earned $200,000 from investing the $80,000,000 in a handbag factory. What is its opportunity cost for Louis Vuitton based off of the information in presented this situation?
a. $200,000
b. $1,000,000
c. $80,000,000
d. $800,000
Answer:
d. $800,000
Explanation:
In opportunity cost parlance, we talk about the cost/benefit forgone of the next best alternative, not for all alternatives forgone.
The benefit forgone of the next best alternative is the $800,000 that could have been earned if the funds have been invested in the money market account, in other words, $800,000.
what are the competitive advantages of international businesses
Answer:
I think the above information will help you.....
Oriole Company sold goods with a total selling price of $809,600 during the year. It purchased goods for $393,200 and had beginning inventory of $68,400. A count of its ending inventory determined that goods on hand was $51,200. What was its cost of goods sold
Answer:
$410,400
Explanation:
Cost of goods sold = Beginning inventory + Purchases - Ending inventory
Cost of goods sold = $68,400 + $393,200 - $51,200
Cost of goods sold = $410,400
So, its amount of cost of goods sold is $410,400.
Dennis Rodman has a $5,000 debt balance on his Visa card that charges 10. 7 percent compounded monthly. Dennis's current minimum monthly payment is 5 perent of his debt balance, which is $250.
How many months (round up) will it take Dennis to pay off his credit card if he pays the current minimum payment of $250 at the end of each month?
How many months will it take Dennis to pay off his credit card?
Answer: 22.13 months
Explanation:
The number of months that it will take Dennis to pay off his credit card will be calculated thus:
Balance amount = $5000
Monthly payment = $250
Interest rate = 10.7%/12 = 0.89%
The number of months will be:
= NPER(0.89, -250, 5000, 0).
= 22.13 months
