Matching each process of the nitrogen cycle with the form of nitrogen that is produced is combustion: NO2; decomposition: NH4+; nitrogen fixation: NH4+; denitrification: N2; and nitrification: NO3-.
The nitrogen cycle refers to the biogeochemical cycle by which nitrogen is converted into multiple chemical forms as it moves among terrestrial, atmospheric, and marine ecosystems. It is a repeating cycle of processes during which nitrogen circulates through both living and non-living things: the atmosphere, soil, water, plants, animals, and bacteria. In order to move through the different parts of the cycle, nitrogen must change forms. The conversion of nitrogen can be carried out through both biological and physical processes. The nitrogen converts into NO2 through stationary combustion and into NH4+ through decomposition. Fixation converts nitrogen in the atmosphere into forms that plants produce i.e., NH4+. Denitrification is the process that converts nitrate to nitrogen gas, producing N2. Nitrification is the process that converts ammonia to nitrite and then to nitrate producing NO3-.
Learn more about Nitrogen cycle:
https://brainly.com/question/20165857
#SPJ4
A rigid 11.7 L sealed vessel containing 3.3 mol O2(g), 1.6 mol CH4(g) and 2.3 mol of He(g)
has an internal temperature of 78oC.
a. Calculate the partial pressure of each gas.b. What is the total pressure in the vessel?
c. Find the mole fraction of each gas in the vessel.d. A lab technician ignites the mist in the flask and the methane gas combusts in oxygen
to form carbon dioxide and water. Find the mole fraction of each gas in the mixture
after the reaction.
a) Partial pressures is Po2 = 8.13 atm,Pch4=3.94atm,Phe = 5.6 atm,B) Total pressure= 17.73 atm, C) mole fraction are Хо2 =0.46, xch4=0.22, xhe=0.32.
mole fraction are Хo2 =3.3/3.3+ 16 + 2.3,Хо2 =0.46, xch4=0.22, xhe=0.32. Xo2 = no2/no2 + nch4 + nhe, total pressure = 8.13+3.94+5.6=17.73 atm. The pressure applied by a solitary gas in a combination is did refer to as its partial pressure. Presuming we get a combination of ideal gas law, we could use ideal gas equation to resolve issues involving gases inside a mixture. Partial Pressure can be defined as if a canning jar filled with far more than one gas, evey gas enforces pressure. The pressure of any gas enclosed within in the container is regarded to as its partial pressure. The number of molecules of a special component in a mix divided by the total amount of moles in the given medium is symbolised by the mole fraction. It's a means of expressing a solution's concentration.
Learn more about Partial pressures here:
https://brainly.com/question/29905133
#SPJ4
Suppose the galvanic cell sketched below is powered by the following reaction: Fe(s)+NiCl2(aq) → FeCl2(aq)+Ni(s) E2 S1 S2 Write a balanced equation for the half-reaction that happens at the cathode of this cell. Write a balanced equation for the half-reaction that happens at the anode of this cell. Of what substance is E1 made? of what substance is E2 made? What are the chemical species in solution S1? What are the chemical species in solution S2?
The chemical species in solution S2 Fe(s)+NiCl2(aq) → FeCl2(aq)+Ni(s)
Fe(s) ------> [tex]Fe^{2+}[/tex] + 2e (Oxidation)
[tex]Ni^{2+}[/tex] (aq) + 2e ------> Ni(s) (Reduction)
Galvanic Cell
Galvanic cells employ the electrical energy generated by the transport of electrons during a redox reaction to carry out practical electrical work. By separating the oxidation and reduction half-reactions and connecting them with a wire so that the electrons must pass through the wire, it is possible to gather the electron flow.
Write a balanced equation for the half-reaction that happens at the cathode of this cell = Ni (aq) + 2e ------> Ni(s)
Write a balanced equation for the half-reaction that happens at the anode of this cell = Fe(s) ------> [tex]Fe^{2+}[/tex] + 2e.
Of what substance is E1 made? = Fe
of what substance is E2 made? = Ni
What are the chemical species in solution S1? = [tex]Fe^{2+}[/tex]
What are the chemical species in solution S2? = [tex]Ni^{2+}[/tex]
To learn more about Galvanic Cell
https://brainly.com/question/15096829
#SPJ1
An organism with the genotype of AaXx can produce gametes containing _________ if the two genes are unlinked.
a. either Aa or Xx
b. either AX, Ax, aX, ax
c. AaXx
d. AX or ax
e. None of the above.
An organism with the genotype of AaXx can produce gametes containing either AX, Ax, aX, ax if the two genes are unlinked .
An organism's genotype is the complete set of its genetic material. [1] Genotype can also be used to refer to the alleles or variants that an individual has at a particular gene or locus. The number of alleles an individual can have for a particular gene depends on the number of copies of each chromosome (also called polyploidy) found in that species. Diploid species like humans have two complete sets of chromosomes. This means that each individual has her two alleles for a particular gene. If both alleles are the same, the genotype is said to be homozygous. If the alleles are different, the genotype is called heterozygous.
Genotypes contribute to the phenotype, observable traits and characteristics of an individual or organism. The extent to which genotype influences phenotype depends on the trait.
Learn more about genotype here : https://brainly.com/question/22117
#SPJ4
What mass of silver will be precipitated when 5.0g of copper are reacted with
excess of silver nitrate solution?
Cu(s) + 2AgNO3(aq) → Cu(NO3)₂(aq) + 2Ag(s)
As per the given balanced reaction, one mole or 63.5 g of Cu produces 2 moles or 215.6 g of silver metal. Hence, 5 g of copper produces16.9 g of Ag.
What is displacement reaction?A displacement reaction is a type of reaction, in which one element or group of the reactant is displaced by the attacking group or element. The reaction between copper and silver nitrate is an example of single displacement reaction.
Given the balanced equation of the reaction. One mole of Cu produces 2 moles of Ag.
atomic mass of Cu = 63.5 g/mol
atomic mass of Ag = 107.8 g/mol
mass 2 moles of Ag = 2 × 107.8 =215.6 g.
Hence, 63.5 g of Cu produces 215.6 g of Ag.
The mass of Ag produced by 5 g of Cu is calculated as follows:
mass of Ag = (5 × 215.6 g) /63.5 g = 16.9 g
Therefore, the mass of silver precipitated will be 16.9 g.
To find more on silver nitrate, refer here:
https://brainly.com/question/29627918
#SPJ1
What is the formula for cobalt (III) oxide?
Co3O2
Co2O3
Co3O
CoO3
Answer:Co2O3
Explanation:
look it up
Answer:
Co2O3
Explanation:
when you write any formula you apply the criss-cross method where you write the charges of each substance
Co3 and O2
applying the criss-cross method( you switch the charges number, in this case you switch the 2 and the 3) :-
Co2 and O3
so Co2O3
How many compounds, of the ones listed below, have hydrogen bonding?CH3CH2CH2NH2 CH3CH2NHCH2CH3 (CH3CH2)2NCH2CH32130
Since CH3CH2CH2NH2 may form intermolecular hydrogen bonds, it has a higher boiling point than other compounds. The hydrogen atoms in (CH3)3N (C H 3) 3 N are joined to the carbon atoms.
Since carbon is not a particularly electronegative atom, it cannot donate hydrogen. There aren't any hydrogen atoms to accept, despite the fact that nitrogen is a strong hydrogen atoms. As a result, CH3CH2CH2CH3 is a nonpolar molecular complex in which induced dipole forces are the only intermolecular forces. When both the donor atom, D, and the acceptor atom, A, are among the highly electronegative elements O, N, or F, hydrogen bonding occurs, as shown by the symbol D-H—-A.
To learn more about hydrogen bonds, click here.
https://brainly.com/question/15099999
#SPJ4
Identify the options below that are results of decreasing the temperature of a system that includes an exothermic reaction in the forward direction. A. The concentration of the reactants increases. B. The concentration of the products increases. C. The equilibrium constant decreases. D. The equilibrium shifts toward the products.
If the reaction is exothermic as described, a rise in temperature will thus trigger the opposite reaction, which will result in a decrease in the amount of the products and an increase in the number of reactants. The reverse outcome will occur if the temperature is lowered.
B. The concentration of the products increases.
A reaction is defined as exothermic if the overall standard enthalpy change (H) is negative. Exothermic processes typically produce heat. Exergonic reaction, which the IUPAC defines as "... a reaction for which the overall standard Gibbs energy change G is negative," is frequently mistaken with the phrase.
Because "H" contributes significantly to "G," a strongly exothermic process is typically also exergonic. Exothermic and exergonic chemical reactions make up the majority of the impressive demonstrations in schools.
learn more about exothermic reaction here:
https://brainly.com/question/23506001
#SPJ4
given the reaction: 234 91 pa x 0 -1e when the equation is correctly balanced the nucleus represented by x is
The reaction is given : ²³⁴Pa₉₁ -----> X + ⁰e₋₁ , the equation is balanced and the nucleus represented by X is ²³⁴U₉₂.
The balanced reaction is given as :
²³⁴Pa₉₁ -----> X + ⁰e₋₁
This reaction is the balanced reaction and X is represented the nucleus and is given as : ²³⁴U₉₂.
The given reaction is the nuclear reaction. the nuclear reaction is the reaction in which the nuclides are produced by the collision between the two atoms nuclei. the nuclear reaction are of the two types the nuclear fission and the nuclear fusion reaction. the nuclear fission is the splitting of the large nuclei in to the smaller ones.
To learn more about nuclear fission here
https://brainly.com/question/13820743
#SPJ4
Which of the following is an observation of a chemical property?
Ozinc reacts with hydrochloric acid
O
O water boils at 100°C.
Osand paper is roughly textured
density of wood is 0.51 g/cm³
Zinc reacts with hydrochloric acid is the correct observation of a chemical property and the right response to the question above.
Equation:
Zn +2HCL → ZnCl2 +H2
Balanced equation:
Zn +2HCL → ZnCl2 +H2
Atomic number 30 and the letter Zn identify zinc as a chemical element. When the oxidation is eliminated, zinc becomes shiny-greyish and becomes a somewhat brittle metal at normal temperature.
Zinc is a crucial trace element for all living things, including humans, animals, plants, and microbes. After iron, it is the trace metal found in humans in the second-highest concentration. As a crucial cofactor for several enzymes, zinc is also a crucial vitamin for development. Many disorders can be caused by a zinc shortage. slowing in growth, infection susceptibility, and diarrhea are among effects of deficiency in children. . Consuming too much zinc can result in copper shortage, ataxia, and sluggishness.
To know more about element visit:
https://brainly.com/question/13794764
#SPJ1
High-purity benzoic acid (C6H₂COOH; AHxn for combustion = -3227 kJ/mol) is used as a standard
for calibrating bomb calorimeters. A 1.221-g sample burns in a calorimeter (heat capacity = 1365 J/°C)
that contains exactly 1.240 kg of water. What temperature change is observed?
°℃
According to the given statement 5 °C temperature change is observed.
How does a calorimeter function and what is it?The variation in heat is measured by a calorimeter. A metal water container placed above an exhaust gases serves as the basic component of a calorimeter. The amount of water's temperature change is measured using a thermometer.
Briefing:The calorimeter burns a 1.221g sample.
The calorimeter contains 1.240 kg of water .
The calorimeter has a heat capacity of 1365 j/°C.
∆H rxn = -3227 kj/mol of benzoic acid
Given: 1.221 g is the mass of the benzoic acid
Benzoic acid's molecular weight is 122.12 g/mol.
122.12 g benzoic acid = 1 mol
1.221 g benzoic acid =1.221/122.12= 0.0099 moles
When burned, 1 mol of benzoic acid releases 3227 kj of energy.
Burning 0.0099 moles of benzoic acid produces energy
= 3227kj×(0.0099mols)/1 mol =32.2647 kj =32264.7 j
The calorimeter absorbed thermal energy
= 1365 j/C ×T
Water absorbs heat
= m× C× T
= 1240 g( 4.18 j/gC ) ×T
= 5183.2j/C×T
the total amount of heat absorbed
= 1365T + 5183.2T
=6548.2T
6548.2T=32264.7
T= 4.92 deg.C
T= 5 °C
The result is a 5 °C temperature change.
To know more about Calorimeter visit:
https://brainly.com/question/4802333
#SPJ1
the equilibrium constant of a redox reaction can be calculated from the standard reduction potentials of involved redox couples at given temperature.
The Nernst equation and the link between the standard cell potential and free energy can be used to determine the equilibrium constant of the redox process in an electrochemical cell.
The ratio of the product concentration to the reactant concentration is the equilibrium constant. a fixed value for a certain reaction at a specific temperature. The letter "c" denotes the expression of the equilibrium constant in terms of concentrations.
The standard cell potential, temperature, reaction quotient, and the cell potential of an electrochemical cell are all related by the Nernst equation. The Nernst equation can be used to determine the cell potentials of electrochemical cells even under unusual circumstances.
To know more about Equilibrium Constant :
brainly.com/question/15118952
#SPJ4
One of the most widely used isotopes in medical diagnostics is technetium-99m (the m indicates that it is a metastable isotope). Write the symbol for this isotope, indicating both mass number and atomic number. Express your answer as an isotope.
Atomic number of Technetium is 43, Mass number is 99 and symbol is Tc ,hence symbol of isotope is 99 m43 Tc
General representation of atom is AZ X
Where , A is mass number , Z is atomic number and X is symbol of element. Atomic number of Technetium is 43, Mass number is 99 and symbol is Tc ,hence symbol of isotope is 99 m43 Tc ,Where m stands for meta stable.
A chemical element with the atomic number 43 and the symbol Tc is known as technetium. It is the lightest element whose radioactive isotopes are all present. Technetium is a synthetic element that is created in abundance. The most prevalent source of naturally occurring technetium is uranium and thorium ores, where it spontaneously fissions as a byproduct, while molybdenum ores produce it as a byproduct of neutron capture. This crystalline, silvery-gray transition metal in group 7 of the periodic table is sandwiched between rhenium and manganese, and its chemical characteristics fall somewhere in the middle of the two nearby elements. Only in traces, 99Tc is the most prevalent naturally occurring isotope.
Learn more about Technetium here:
https://brainly.com/question/16184700
#SPJ4
a chemistry graduate student is given of a chloroacetic acid solution. chloroacetic acid is a weak acid with . what mass of should the student dissolve in the solution to turn it into a buffer with ph ? you may assume that the volume of the solution doesn't change when the is dissolved in it. be sure your answer has a unit symbol, and round it to significant digits.
Choloracetic acid, 12 g. The colorless solution of the white crystalline substance known as chloroacetic acid.
Up to 80% of the solution can be acidic. By inhalation, ingestion, and skin contact, it is poisonous. It corrodes flesh and metals.
The equilibrium of the buffer is
CH2ClCO2 + H+ HCH2ClCO2
PKA = Log Ka
Ka: [CH2ClCO2] = 1,3 x 103. "H+" / "HCH2ClCO2"
Using the Henderson-Hasselbalch formula:
pH equals pka plus log10 [A]/[HA].
2,89 + log10 [A] / [HA] = 3,01
1,318 = [A⁻] / [HA]
Since chloroacetic acid (HA) has a molar concentration of 0,20M
[A⁻] = 0,26 mol/L
There are 500 mL plus 0.5 L.
Chloroacetic acid is equal to 0,26 mol/L x 0,5 l, or 0,13 moles. By weight:
Choloracetic acid is equal to 0,13 mol (94,5g / 1mol) = 12 g.
Learn more about concentration here-
https://brainly.com/question/10725862
#SPJ4
Calculate the number of moles of carbon dioxide gas if the volume is 2.0 L, the pressure is 2.0 atm, and the temperatue is 410 K.
Use three significant figures in your answer.
mol
Taking into account the ideal gas law, the number of moles of carbon dioxide is 0.119 moles.
Ideal gas lawAn ideal gas or theoretical gas is a set of separate gaseous molecules separated from each other in such a way that no intermolecular forces are exerted between them.
The ideal gas condition normally occurs at low pressures and high temperatures, which allows each particle to be far from each other so that they do not interact.
The pressure, P, the temperature, T, and the volume, V, of an ideal gas, are related by a simple formula called the ideal gas law:
P×V = n×R×T
Where:
P is the gas pressure.V is the volume that occupies.T is its temperature.R is the ideal gas constant. The universal constant of ideal gases R has the same value for all gaseous substances. The numerical value of R will depend on the units in which the other properties are worked.n is the number of moles of the gas. Number of moles of carbon dioxideIn this case, you know:
P= 2 atmV= 2 LT= 410 KR= 0.082 (atmL)÷(molK)n= ?Replacing in the ideal gas law:
2 atm× 2 L= n×0.082 (atmL)÷(molK)× 410 K
Solving:
[2 atm× 2 L]÷ [0.082 (atmL)÷(molK)× 410 K]= n
0.119 moles= n
Finally, the number of moles is 0.119 moles.
Learn more about the ideal gas law:
brainly.com/question/4147359
#SPJ1
with reference to compound a below, label each compound as an identical molecule, an isomer, a resonance structure, or neither.
Label for each of the compounds given in the question are: 1) Isomer, 2) Isomer, 3) Resonance Structure, 4) Isomer 5) Neither.
A group of two or more Lewis structures known as resonance structures describe the electronic bonding of a single polyatomic species, including fractional bonds and fractional charges. The number of electrons in resonance structures should be constant; do not add or subtract any electrons. (Count the electrons to determine their number). Every resonance structure complies with the standards for writing Lewis Structures. Structure hybridization must be constant. By cyclically moving elections, it is possible to depict the two resonance configurations of the benzene ring. Multiple resonance structures can be found in conjugated double bonds.
To learn more about resonance structures click here
brainly.com/question/29547999
#SPJ4
Epinephrine is a hormone secreted into the bloodstream in times of danger and stress. It is 59% Carbon, 7.1% Hydrogen, 26.2% Oxygen and 7.7% Nitrogen by mass. Determine the empirical formula. The molar mass is 148 g/mol.
Based o the percentage masses of the elements, the empirical formula of epinephrine is C₉H₁₃O₃N.
What is the empirical formula of epinephrine?The empirical formula of epinephrine is calculated below as follow:
Mole ratio of the elements are determined:
Carbon = 59% / 12
Carbon = 0.049 moles
Hydrogen = 7.1% / 1
Hydrogen = 0.07 moles
Oxygen = 26.2% / 16
Oxygen = 0.016
Nitrogen = 7.7% / 14
Nitrogen = 0.0055
The simplest whole-number ratio will be:
C = 0.049/0.0055
C = 9
Hydrogen = 0.07/0.0055
H = 13
Oxygen = 0.016/0.0055
Oxygen = 3
Nitrogen = 0.0055/0.0055
Nitrogen = 1
The empirical formula = C₉H₁₃O₃N
Learn more about empirical formula at: https://brainly.com/question/1603500
#SPJ1
Write the overall balanced cell reaction for the following voltaic cell Fe(s) | Fe2+ (aq) || Ag + (aq) | Ag(s) (Ctrl).
the overall balanced cell reaction for the following voltaic cell
Hg2Cl2(s) + Cu(s) ® 2Hg(l) + Cu2+(aq) + 2Cl-(aq)
The cell reaction, also known as the total reaction, is the reaction that occurs within the cell as a whole and is expressed under the assumption that the right electrode is the cathode and that the spontaneous reaction is the one in which reduction takes place in the right-hand compartment.Galvanic, also known as Voltaic, and electrolytic cells are the two varieties of electrochemical cells. While electrolytic cells utilize non-spontaneous reactions and therefore need an external electron source, such as a DC battery or an AC power source, galvanic cells get their energy from spontaneous redox reactions.
Learn more about cell reaction here:
https://brainly.com/question/995105
#SPJ4
i can not figure out this question to save my life
Specific heat capacity of a substance is the amount of heat required to raise the temperature by one degree Celsius of one gram of a substance. Therefore, the total enthalpy of the given reaction is -781.44KJ.
What is Enthalpy?Enthalpy term is basically used in thermodynamics to show the overall energy that a matter have. Mathematically, Enthalpy is directly proportional to specific heat capacity of a substances.
Mathematically,
q = n ×ΔH
where
q = amount of heat
n = no of moles
ΔH = enthalpy
n = w / M.M
w = given mass
M.M = molar mass
4CH[tex]_3[/tex]NH[tex]_2[/tex]+2H[tex]_2[/tex]O[tex]\rightarrow[/tex]3CH[tex]_4[/tex]+CO[tex]_2[/tex]+4NH[tex]_3[/tex] ΔH=-138.8KJ
number of moles of methyl amine=175/31.06
=5.63moles
enthalpy for reaction of one mole of methyl amine=-138.8KJ
enthalpy for reaction of 5.63 mole of methyl amine=-138.8KJ×5.63
=-781.44KJ
Therefore, the total enthalpy of the given reaction is -781.44KJ.
To know more about enthalpy, here:
brainly.com/question/24170335
#SPJ1
zones in lakes and oceans are delineated by depth, distance from shore, or light penetration. different zones have different physical and chemical characteristics, such as temperature and salinity. label the diagrams of zonation in lakes and oceans. drag the labels to their correct targets on the diagrams below.
The diagrams of zonation in lakes and oceans with correct targets are :
a) fresh plant may be rooted here
b) littoral zone
c) limnetic zone
d) alternately dry and submerged
e) extends to edge of the continental shelf
f) generally low nutrient levels
g) light penetrates here
h) no photosynthesis occurs here
i) benthic zone
There are zones which divided the lakes. they are separated by the water from the top to bottom and the side to the side. that is named as : the littoral zone , the limnetic zone, the profundal zone , the benthic zone and the euphotic zone . the waters temperature will be affected the density. there are several zones in the ponds and the lakes. these are dived by the water column.
The limnology divides the lakes in the three types of zones ., that is the limnetic zone, the littoral zone and the benthic zone.
To learn more about zones here
https://brainly.com/question/29892129
#SPJ4
In a gas chromatogram, the retention time of compounds A and B are 1.25 min and 1.45 min, respectively. If both of these compounds have similar structures, which of the compounds has a higher boiling point?
In a gas chromatogram, the retention time of compounds A and B are 1.25 min and 1.45 min, respectively. If both of these compounds have similar structures, Compound A has a higher boiling point.
Gas chromatogram is a widely used technique in analytical chemistry for the separation and investigation of compounds that may evaporate without disintegrating (GC). The purity of a substance can be assessed by GC, as can the components of a mixture. Preparative chromatography can make use of GC to separate pure compounds from a mixture. Other names for gas chromatography include vapor-phase chromatography (VPC) and gas-liquid partition chromatography (GLPC). These alternative names and the accompanying acronyms are frequently used in scientific literature. Gas chromatography is a technique for separating compounds in mixtures by injecting a gaseous or liquid sample into a mobile phase, which is usually referred to as the carrier gas, and passing the gas through a stationary phase. The mobile phase is often composed of an inert gas or an unreactive gas, such as helium, argon, nitrogen, or hydrogen. The stationary phase is a minuscule layer of viscous liquid on a surface of solid particles on an inert solid support in a piece of glass or metal tubing known as a column.
To know more about gas chromatogram please refer: https://brainly.com/question/18763279
#SPJ4
On a hot afternoon (311 K) a party balloon was filled with 2.07 L of helium. That evening the temperature dropped to 295 K. What is the
new volumen of the balloon?
Answer:
2.02 L
Explanation:
The volume of a gas is directly proportional to its temperature, according to the ideal gas law. This means that as the temperature of a gas decreases, its volume will also decrease.
To determine the new volume of the balloon as the temperature drops from 311 K to 295 K, we can use the ideal gas law to calculate the new volume of the gas:
PV = nRT
Where:
P = the pressure of the gas (assuming it remains constant)
V = the new volume of the gas
n = the number of moles of the gas (assuming it remains constant)
R = the universal gas constant
T = the new temperature of the gas
Since we know the pressure, number of moles, and universal gas constant, we can solve for the new volume of the gas by substituting in the known values and solving for V:
V = nRT / P
Substituting in the values from the problem, we get:
V = (n * R * 295 K) / P
Since the number of moles and the universal gas constant are constants, we can simplify the equation to:
V = k / P
Where k is a constant equal to the product of the number of moles, the universal gas constant, and the original temperature of the gas (in this case, k = n * R * 311 K).
Since we know the value of k and the pressure of the gas, we can solve for the new volume of the gas by substituting in the known values:
V = (k / P)
= (n * R * 311 K) / P
= (2.07 L * 8.31 L * atm / mol * K * 311 K) / P
= 2.02 L
Therefore, the new volume of the balloon is approximately 2.02 L.
Which of the following characteristics was NOT included in Dmitri Mendeleev's periodic table?O distribution of elements determined by electron configurationO heavier elements placed in rows closer to the bottom of the tableO elements arranged by increasing atomic massO elements placed in columns based on chemical properties
Mendeleev's periodic table includes all the elements that were known at the time.
The rows of the table, were called periods and each period contained eight elements that increased in atomic mass from left to right.
The columns of the table, called groups, contained elements with similar properties.
The special this about this table was, the gaps for predicted elements were left.
In this question, we are given with four statements and are asked to determine, which of the following statement is not true regarding Dmitri Mendeleev's periodic table.
distribution of elements determined by electron configurationheavier elements placed in rows closer to the bottom of the tableelements arranged by increasing atomic masselements placed in columns based on chemical propertiesOut of these four options, option number 1 is correct as the statement distribution of elements determined by electron configuration is not true regarding Mendeleev's periodic table.
To know more about Mendeleev's periodic table:
brainly.com/question/11974961
#SPJ4
Determine the structure of C6H10, which upon oxidation gives acetic and isobutyric acid
Answer:CH
3
CH
2
CH
2
C≡C−CH
3
Explanation:
Consider the half reactions one more time. Will the reaction as written here occur spontaneously?
Fe2+ (aq) +2 e-→ Fe(s) E° = -0.447 V
Cu2+ (aq) +2 e-→ Cu(s) E° = 0.342 V
Fe2+ (aq) + Cu(s) → Cu²+ (aq) + Fe(s)
yes or no or need more information
To solve such we need to have concept of spontaneity. The terms "feasible" and "likely" are both used to describe spontaneous processes. Therefore, second reaction will occur spontaneously.
What is spontaneity?The word "spontaneity" refers to a process's viability. A process is referred to as spontaneous if it can occur either on its own or as the result of some initiation under a certain set of circumstances. In other terms, a spontaneous process is one that may happen on its own, without any outside intervention.
For a reaction to be spontaneous, the value for ΔG should be negative and for that cell potential should be positive value according to following equation.
ΔG=-nFE
ΔG = Gibbs's free energy
E= cell potential
F= 96500
n= number of electron
Therefore, second reaction will occur spontaneously.
To learn more about spontaneity, here:
https://brainly.com/question/5372689
#SPJ1
Voltaic cells are able to provide energy in the form of electricity because the potentials of their redox reactions permit electrons to flow
spontaneously.
true or false
Answer: True. Voltaic cells, also known as galvanic cells, are able to provide energy in the form of electricity because the potentials of their redox reactions permit electrons to flow spontaneously. Redox reactions involve the transfer of electrons from one species to another, and the flow of electrons through a circuit can be used to do work, such as powering an electric motor or a lightbulb. The potential difference between the two half-cells in a voltaic cell is called the cell potential, and it determines the direction and magnitude of the flow of electrons.
Explanation:
Question 20 (1 point) ✓ Saved A short circuit can cause ________ because there is nothing in the circuit to limit the current and absorb the electrical energy. Heat builds up quickly in the wire and power supply. (Lesson 4.05) an explosion a release of harmful chemicals a fire All of the above
A short circuit can cause giant spark ,because there is nothing in the circuit to limit the current and absorb the electrical energy. Heat builds up quickly in the wire and power supply. (Lesson 4.05) an explosion a release of harmful chemicals a fire All of the above
What is Circuit?
The point where the electrons enter the electrical circuit is known as the source, and the point where they depart is known as the return. Let's do a little experiment; you'll require the following:
Electrical tape, wire, and electric bulbs
power source
Only when there is at least one closed loop running from the positive to the negative end of the circuit is it considered complete. This is the most basic type of electrical circuit. A television's internal circuit is more intricate and made up of several parts
Learn more about Circuit from given link
https://brainly.com/question/2969220
#SPJ1
the decomposition of h2o2 is represented by the equation above. the reactuin us thermodynamically favorable
The decomposition of H2O2 is represented by the equation above. the reaction us thermodynamically favorable 4H₂O₂ → 4H₂O + 2O₂
The following diagram illustrates how hydrogen peroxide decomposes chemically;
2H₂O₂ → 2H₂O + O₂
As a result, one oxygen molecule and two water molecules result from the breakdown of two hydrogen peroxide molecules.
Numerous chemical substances spontaneously react with molecular oxygen to produce peroxides in the form of free radicals.
Given that there are four hydrogen peroxide molecules breaking down in the diagram, we have;
4H₂O₂ → 4H₂O + 2O₂
The results of the breakdown of the four molecules of hydrogen peroxide are depicted in the accompanying diagram.
Learn more about hydrogen here-
https://brainly.com/question/28937951
#SPJ4
Which if these options best describes the diagnostic cleavage that is typical of the mica group of minerals (which includes muscovite and bietet A) Three perpendicular cleavage planes B) Two cleavage planes intersecting at 90° C) Two cleavage planes intersecting at 120 D) A single planar cleavage
D ) The answer that best depicts the diagnostic cleavage that is typical of the mica group of minerals which include muscovite and bietet is a single, planar cleavage .
Cleavage is the splitting of minerals along natural planes of weakness
When there is only one cleavage plane, a single, planar cleavage known as the basal or pinacoidal cleavage takes place. cleaved at the base of the graphite. Mica (like muscovite or biotite) has basal cleavage, that's why mica can be peeled into thin sheets.
So single planar cleavage is answer of this question.
To know more about cleavage click below link:
https://brainly.com/question/11933501#
#SPJ4
. What happens when metals react with water?
Answer:
Metals react with water to form oxides or hydroxides and release Hydrogen gas
Explanation:
this method of acquiring mw differs from sec and gives dosy nmr many advantages over sec. as stated before, molecules of specific sizes produce indi-vidual diffusion coefficients. due to low sample con-centration, the purity of polymer is not as essential compared to sec; thus, reducing preparation time. dosy also requires minimum amounts of solvent
A well-known NMR technique called diffusion ordered spectroscopy (DOSY) provides diffusion coefficients for specific resonances in NMR spectra.
The main applications of DOSY are the analysis of small molecule mixtures and the oligomeric state of biomolecules. The spreading Self-Diffusion (SD)-NMR and diffusion ordered spectroscopy are two common names for the NMR technology (DOSY). This is accomplished by fusing magnetic field gradients, which encode spatial information, with radio-frequency pulses, which are commonly employed in NMR spectroscopy. Magnetic field gradients are used by Diffusion Ordered Spectroscopy (DOSY) to examine diffusion processes in both solid and liquid materials. Liquid structure is discovered using NMR spectroscopy. It is also used to figure out how soluble chemical molecules are structured.
Learn more about diffusion here-
https://brainly.com/question/10532944
#SPJ4