What energy occurs when nuclear bonds split or fuse together?
Atoms are divided via nuclear fission, which is employed in power plants to liberate energy. Atoms are combined during fusion, which happens in stars like the sun, and produces energy. A source of clean energy with less radioactive waste is fusion.
Nuclear links can break or fuse together to release energy. A substantial quantity of energy is released when an atom's nucleus splits into two or smaller nuclei during nuclear fission. Electricity is produced using this method at nuclear power plants. Contrarily, nuclear fusion is the process in which two or more atomic nuclei come together to produce a heavier nucleus, releasing a massive amount of energy in the process. This happens in stars like the sun naturally when hydrogen is fused with helium to create energy. Nuclear fusion is being studied by scientists as a possible clean energy source since it generates a lot less radioactive waste than nuclear fission.
learn more about nuclear fission here:
https://brainly.com/question/913303
#SPJ4
PLEASE HELP ME
2A
2B
2C
PLEASE
Answer:
Explanation:
no
The circuit below contains a battery with negligible internal resistance, three resistors, and a switch. The value of resistor R1R1 is 2 Ohms.a) When the switch is open, what is the value of the current passing through R1R1 ?
b) When the switch is closed, what is the value of the current passing through R1R1?
a) When the switch is open, the value of the current passing through R1 is calculated by using Ohm's Law that states that the current through a conductor between two points is directly proportional to the voltage across the two points.
The equation is written as:
V = IR
Where, V is the voltage, I is the current and R is the resistance.
In this case, the resistance is
R1 = 2Ω.R1
is the only resistor in the circuit when the switch is open. Therefore, the current through R1 is given as:
I = V / R1
where, V is the voltage provided by the battery.
I = 12V / 2ΩI = 6 A
Therefore, when the switch is open, the value of the current passing through R1 is 6 A.
b) When the switch is closed, the equivalent resistance of the circuit can be calculated by adding the resistances of the three resistors.
R = R1 + R2 + R3
where, R1 = 2Ω, R2 = 5Ω, and R3 = 8Ω.
R = 2Ω + 5Ω + 8ΩR = 15Ω
Now, the current through the resistor can be calculated by using Ohm's Law that states that the current through a conductor between two points is directly proportional to the voltage across the two points.
I = V / R
where, V is the voltage provided by the battery which is 12 V.
I = 12V / 15ΩI = 0.8 A
Therefore, when the switch is closed, the value of the current passing through R1 is 0.8 A.
"internal resistance", https://brainly.com/question/31131378
#SPJ11
which of the following best describes bedded gypsum and halite? a. varieties of coal b. varieties of calcium carbonate evaporites; c. chemical sedimentary rocks d. detrital sedimentary rocks
Halite and gypsum in beds are examples of chemical sedimentary rocks. They are often found in arid or semi-arid areas where minerals from evaporating saline liquids precipitate.
Which of the following statements accurately sums up rock salt and rock gypsum?Common chemical sedimentary rocks include limestone, rock salt, and rock gypsum. When minerals crystallise straight from water, chemical rocks are created.
Gypsum is a sort of rock, right?Gypsum is a soft, pale sedimentary rock that was created during the Silurian Period when Ohio was covered by ancient seas. It can be found as a rock in bedded layers as well as in the mineral form of selenite. Anhydrite and salt (halite, NaCl) are found interspersed with gypsum (CaSO4).
To know more about limestone visit:-
https://brainly.com/question/27974897
#SPJ1
ASTRONOMY!!
During her presentation on exoplanets, Johana explains to the class that while Proxima-b and TRAPPIST-1e may
potentially be able to support life, with each of these planets, one side of the planet always faces the sun, making that
side perpetually hot and the dark side eternally cool. What term does Michelle use to describe this?
extinguishable
tidally unlocked
tidally locked
bipolar
The term that Johana uses to describe the phenomenon where one side of the planet always faces the sun is "tidally locked".
What is TRAPPIST-1e?
TRAPPIST-1e is an exoplanet located in the TRAPPIST-1 system, which is a small, ultra-cool dwarf star located about 40 light-years away from Earth in the constellation Aquarius. TRAPPIST-1e is believed to be a rocky planet with a size and mass similar to Earth, and it orbits its star within the habitable zone, which is the region around a star where temperatures are just right for liquid water to exist on the surface. Because of these properties, TRAPPIST-1e is considered a potential candidate for the presence of life.
Johana is describing a phenomenon called "tidal locking" when she talks about Proxima-b and TRAPPIST-1e. Tidal locking occurs when a celestial object's rotation and revolution periods are equal, resulting in one side always facing the parent object. This happens because of the gravitational interaction between the two objects. In the case of planets orbiting their star, the gravitational forces of the star acting on the planet cause it to slow down its rotation over time until one side of the planet faces the star.
Learn more about TRAPPIST-1e from given link
https://brainly.com/question/30024119
#SPJ1
For a UART module with (8N1) format (which means 8 data bits, No parity and 1 stop bit), and Baudrate of 1000 Baud-per-second. Assume the channel is used at its full capacity. choose all the true statements:1. The bitrate is 1000 bit/sec.2. The data rate is 1000 bit/sec.3. The data rate is 800 bit/sec.4. The bitrate is 2000 bit/sec.
The correct answers are 1,2, and 4: the bitrate is 1000 bit/sec, the data rate is 1000 bit/sec, the bitrate is 2000 bit/sec.
For a UART module with (8N1) format (which means 8 data bits, No parity and 1 stop bit), and Baudrate of 1000 Baud-per-second. Assume the channel is used at its full capacity. The correct answers are:
1. The bitrate is 1000 bit/sec.
2. The data rate is 1000 bit/sec.
4. The bitrate is 2000 bit/sec.
The bitrate of a UART module with (8N1) format and a baudrate of 1000 Baud-per-second is 1000 bit/sec. The data rate, which is the rate at which the signal is actually transmitted, is the same as the bitrate, in this case, 1000 bit/sec. The bitrate cannot be 2000 bit/sec because the baudrate is 1000 Baud-per-second.
Learn more about UART : https://brainly.com/question/13014495
#SPJ11
which of the four maxwell equations explains how a magnetic stripe credit card reader works? group of answer choices gauss's law for electric fields. gauss's law for magnetic fields. ampere's law. faraday's law.
The Maxwell equation that explains how a magnetic stripe credit card reader works is Faraday's law.
Faraday's law states that a changing magnetic field will induce an electromotive force (EMF) in a conductor. In a magnetic stripe credit card, the stripe contains small magnetic particles that are arranged in a particular pattern.
As the card is swiped through the reader, the magnetic field in the reader's head changes, causing a corresponding change in the magnetic field of the stripe. This change in magnetic field induces an EMF in the conductor, which is then read by the reader and used to extract information from the card.
For more similar questions on magnetic field:
brainly.com/question/14411049
#SPJ11
what is the log2(100)? it or use a calculator. (to 2 decimal places) round that number up to the next highest integer: based on the tests you've done: what is the maximum number of iterations used for quick search on a collection of 100 items? what is the maximum number of iterations used for linear search on a collections of 100 items? what is the bigo of quick search? hint: n
Log2(100) is 6.64 to 2 decimal places. Rounded up to the next highest integer, it is 7. Based on the tests done, the maximum number of iterations used for quick search on a collection of 100 items is 7 iterations.
The maximum number of iterations used for linear search on a collection of 100 items is 100 iterations. The big O of quick search is O(n log n).
log2(100) is the same as x in 2^x=100
This means 2^6.64=100
To solve for 6.64, take the logarithm of both sides.
log(2^6.64)=log(100)
6.64log(2)=log(100)
6.64=2log(10)+2log(5)
log(2)+log(1.25)+log(10)=6.64
log(2)+log(1.25)=6.64-log(10)
log(2)+log(1.25)=2.02
log(2x1.25)=2.02x2^(log(2)+log(1.25))=2.02 x 2^(log(10))=7 (rounded up)
The maximum number of iterations used for quick search on a collection of 100 items is 7 iterations.
The maximum number of iterations used for linear search on a collection of 100 items is 100 iterations. In big O notation, the time complexity of linear search is O(n).
To learn more about "log2(100)", visit: https://brainly.com/question/15602305
#SPJ11
since the moon cooled sooner than the earth, it is reasonable to assume that it no longer has a molten metal core. if that is the case, what conclusion would you draw about the magnetic fields around the moon?
The conclusion that could be drawn about the magnetic fields around the moon is that "the moon no longer has a magnetic field."
What causes magnetic fields around celestial objects?Planets like Earth that have a liquid metal outer core produce magnetic fields. It's said that the planet's rotation causes the magnetic field. When the planet spins, the molten metal in the core moves, producing an electric current. As a result of the moving electric current, a magnetic field is formed around the planet.
Moons that do not have a molten metal core cannot produce magnetic fields. The moon's magnetic field is significantly weaker than Earth's magnetic field. The surface of the moon is scorched by the sun's radiation due to the absence of a magnetic field. So, the conclusion that can be drawn about the magnetic fields around the moon is that the moon no longer has a magnetic field.
Learn more about magnetic fields here: https://brainly.com/question/30899235.
#SPJ11
a charge is passing through a static magnetic field. the velocity of the charge makes a 30o angle with the field. the force exerted by the field changes the kinetic energy of the charge.
The magnetic force exerted by the field on the charge is 0.5qvB.
F = qvBsin(θ)
where;
F = qvBsin(30)
F = 0.5qvB
Magnetic force is a fundamental force that arises due to the motion of electric charges. It is the force that acts between two magnetic poles or between a magnetic pole and a moving charged particle. Magnetic force is a vector quantity and is described in terms of its direction, magnitude, and point of application.
The force between two magnetic poles is governed by the inverse square law, which means that the force decreases as the distance between the poles increases. The direction of the magnetic force is perpendicular to the direction of motion of the charged particle and to the direction of the magnetic field in which it moves. The magnitude of the magnetic force is proportional to the charge of the particle, its velocity, and the strength of the magnetic field.
To learn more about Magnetic force visit here:
brainly.com/question/3160109
#SPJ4
Why don't you have to know how the wire is bent? (Select all that apply.)a. E is dependent on the length L of the wire which only applies to the segment of the wire that is not bent. b. E is not dependent on how the wire is bent, only the diameter of the wire is needed. c. Since conventional current flows in the direction of E^rightarrow, E is the same in every part of the wire with uniform properties. d, E must be parallel to the wire at every location even if the wire twists and turns.
Options b and c are correct. These two are the reasons that indicate why one doesn't have to know how the wire is bent.
An electric field is a vector field created by a charged object. When a charged particle interacts with the electric field of another charged particle, it will experience a force, which can be either attractive or repulsive. The electric field at a given point in space is determined by the charge and distribution of charges in the space, as well as by the location and orientation of the observer. The strength of the electric field is measured in units of volts per meter (V/m).
Electric field (E) is not dependent on how the wire is bent, only the diameter of the wire is needed. And since conventional current flows in the direction of [tex]E\rightarrow[/tex], E is the same in every part of the wire with uniform properties. This implies that E must be parallel to the wire at every location even if the wire twists and turns. Therefore, even if the wire is bent, one need not know its shape, as long as the properties remain constant.
Thus, options b and c are the correct answers.
Learn more about electric current:
https://brainly.com/question/1100341
#SPJ11
During a baseball game, the sound of the bat hitting the ball can be heard in most parts of the stadium. That sound is weaker at greater distances. What is the cause of this phenomenon?(1 point)
The sound waves are spread out over a large area.
The sound waves are blocked by people in the stadium.
The sound waves can only travel through certain materials.
The sound waves slow down as they move away from the bat.
The cause of the phenomenon is because the sound waves are spread out over a large area. Option 1 is correct.
How do sound waves propagate in this case?In this case, the sound waves are spread out over a large area. This is due to the fact that sound waves propagate outward from their source in all directions, creating a spherical wavefront that expands as it moves away from the source. As the wavefront expands, the same amount of sound energy is distributed over a larger and larger area, causing the sound intensity to decrease with distance from the source. This is known as the inverse square law, which states that the intensity of a sound wave decreases proportionally to the square of the distance from the source. Therefore, the farther away you are from the source of the sound, the weaker it will be.
To know more about sound waves, visit:
https://brainly.com/question/21995826
#SPJ1
Learning Goal: To understand the concept of normal modes of oscillation and to derive some properties of normal modes of waves on a string. A normal mode of a closed system is an oscillation of the system in which all parts oscillate at a single frequency. In general there are an infinite number of such modes, each one with a distinctive frequency fi and associated pattern of oscillation. Consider an example of a system with normal modes: a string of length L held fixed at both ends, located at x=0 and x=L. Assume that waves on this string propagate with speed v. The string extends in the x direction, and the waves are transverse with displacement along the y direction. In this problem, you will investigate the shape of the normal modes and then their frequency. The normal modes of this system are products of trigonometric functions. (For linear systems, the time dependance of a normal mode is always sinusoidal, but the spatial dependence need not be.) Specifically, for this system a normal mode is described by yi(x,t)=Aisin(2πxλi)sin(2πfit).
a) Find the three longest wavelengths (call them λ1, λ2, and λ3) that "fit" on the string, that is, those that satisfy the boundary conditions at x=0 and x=L. These longest wavelengths have the lowest frequencies.
Express the three wavelengths in terms of L. List them in decreasing order of length, separated by commas.
b) The frequency of each normal mode depends on the spatial part of the wave function, which is characterized by its wavelength λi.
Find the frequency fi of the ith normal mode.
Express fi in terms of its particular wavelength λi and the speed of propagation of the wave v.
c) Find the three lowest normal mode frequencies f1, f2, and f3.
Express the frequencies in terms of L, v, and any constants. List them in increasing order, separated by commas.
1) The frequency fi of the ith normal mode is given by the equation fi = v/2λi, where λi is the wavelength of the ith mode.
2) The three lowest normal mode frequencies f1, f2, and f3 can be expressed in terms of L, v, and constants as follows: f1=v/2L, f2=v√2/2L, and f3=v2/2L.
3) The frequencies can be listed in increasing order as f1=v/2L, f2=v√2/2L, f3=v2/2L.
A dynamical system's normal mode of motion is a pattern of motion in which every component oscillates sinusoidally at the same frequency and with the same fixed phase relationship. The normal modes' description of free motion occurs at set frequencies. These constant frequencies of a system's normal modes are referred to as its natural or resonant frequencies.
Learn more about mode, frequency at : https://brainly.com/question/11722229
#SPJ11
Why is this wrong? Can anybody please help me thanks!
A resultant force of 5437 N would accelerate an 810 kg mass at 6.7 m/s². The answer that you have entered is 5427 and that is why it says incorrect.
What is a resultant force?A resultant force is the single force that represents the combined effect of two or more forces acting on an object. It is the net force that results from the vector sum of all the individual forces. The direction and magnitude of the resultant force determine the motion of the object, whether it is at rest, moving at a constant velocity, or accelerating.
To calculate the resultant force, we can use the formula:
Resultant force = mass x acceleration
Plugging in the given values, we get:
Resultant force = 810 kg x 6.7 m/s²
Resultant force = 5437 N
Therefore, a resultant force of 5437 N would accelerate an 810 kg mass at 6.7 m/s².
To find out more about resultant forces, visit:
https://brainly.com/question/16380983
#SPJ1
An object with a mass of
1.23 kg
starts from rest at the origin. It then experiences a force as a function of time
F =A i^+(B−Ct) j^
, where A=0.234 N, B=1.15 N and C=0.345 N/s. What is the speed of this object at t=3.00 s ?
Velocity refers to measuring the speed and direction of change in the position of an object. The speed of the object at t = 3.00 s is v = 0.35 m/s.
At t = 3.00 s, the object with a mass of 1.23 kg will have a speed given by the equation v = sqrt(2*F/m), where F is the total force experienced by the object and m is its mass.
Substituting the values for F, A, B, C and m, we get:
[tex]v = sqrt(2.(0,234.i+(1,15 - 0,345.3)j^)/1,23)[/tex]
Simplifying, we get:
v = [tex]sqrt(2.(0,234.j+(-0,035)j)/1,23)[/tex]
Using the Pythagorean theorem, we can calculate the magnitude of the vector v:
v = [tex]sqrt ((0,234.0,234) + (-0,035.-0,035))/1,23)[/tex]
Therefore, the speed of the object at t = 3.00 s is v = 0.35 m/s.
Learn more about constant speed: brainly.com/question/2681210
#SPJ11
How the greenhouse effect traps the sun's energy in the atmosphere?
The greenhouse effect is a natural process in which greenhouse gases (like carbon dioxide, methane, and water vapor) in the Earth's atmosphere trap some of the sun's energy, warming the planet.
The greenhouse effect because it works in a similar way to how a greenhouse traps heat. Here's how it works:
1. The sun's energy enters the Earth's atmosphere as visible light and ultraviolet (UV) radiation.
2. Some of this energy is absorbed by the Earth's surface, which then radiates some of the energy back up into the atmosphere as infrared (IR) radiation.
3. Greenhouse gases in the atmosphere (like carbon dioxide) absorb some of this IR radiation, which warms the gases. This warming causes the greenhouse gases to radiate some of the energy back down to the Earth's surface. This is called "back radiation."
4. As a result, the Earth's surface receives more energy than it would have without the presence of greenhouse gases. This excess energy warms the Earth's surface and lower atmosphere, resulting in the greenhouse effect.Therefore, the greenhouse effect traps the sun's energy in the atmosphere by absorbing and re-radiating some of the infrared radiation emitted by the Earth's surface, which leads to the warming of the planet.
for such more question on greenhouse
https://brainly.com/question/19521661
#SPJ11
two springs are connected in series so that spring scale a hangs from a hook on the ceiling and a second spring scale, b, hangs from the hook at the bottom of scale a. apples weighing 287 n hang from the hook at the bottom of scale b. ignore the weights of the ropes and scales. what is the reading on the lower scale b?
The reading on the scale B is 287N. This is because the two springs in series are both in equilibrium, meaning that the forces exerted by each spring are equal to each other and to the weight of the apples (287N).
What is the reading on scale?
To determine the reading on the lower scale b, you need to calculate the total elongation of both the springs. Let us assume that the elongations of springs A and B are dA and dB, respectively. Spring Scale A is fixed to the ceiling and is vertically above Spring Scale B. Spring Scale A reads the total weight of the combination, which is the weight of both the apples and the scales. So, the weight on Scale A is 287N (Weight of the apple).
The force exerted by Scale A is divided between the two springs, so you need to know the spring constant for both the springs to calculate how the weight will be divided. Let’s assume that the spring constant for spring A is KA and spring constant for spring B is KB. Hence, we know the following:
F = kx
where, F is the force exerted by the spring, x is the elongation of the spring, and k is the spring constant.
We can express this as:
F = m×g
where, m is the mass attached to the spring and g is acceleration due to gravity.
Using the above two equations, we can get the following:
x = m×g/k
The weight on Scale B is 287N, which is the force exerted by spring B.
So, 287 = KB×dB
Also, the force exerted by Scale A is divided between the two springs. The force on spring A is the total weight, which is 287N plus the weight of the two spring scales (which can be ignored). So, the force on spring A is 287N.
So, 287 = KA×dA + KB×dB
Since both the springs are connected in series, the total elongation (d) is the sum of the elongations of the individual springs. Hence,d = dA + dB. So, substituting the value of dB in the above equation:
287 = KA× dA + KB×dA/KB
Therefore, dA = 287/ (KA + KB)
Therefore, the reading on scale B (lower scale) is: dB = 287/KB. So, the reading on scale B is 287/KB.
Learn more about Force here:
https://brainly.com/question/24115409
#SPJ11
For the velocity distribution of Prob. 4.10, (a)(a) check continuity. (b)(b) Are the Navier-Stokes equations valid? (c)(c) If so, find p(x,y)p(x,y) if the pressure at the origin is p0p0.
There is continuity in the flow as the velocity distribution is constant in the x-direction, but it can vary in the y-direction.The Navier-Stokes equations are thus valid. Finally, p(x,y)p(x,y) if the pressure at the origin is p0p0 is $$ p(x,y) = p_0 - \rho V^2 \frac{xy}{h^2} $$.
(a) Check continuity:Let v (x) be the velocity distribution. By the equation of continuity, we have the following:$$ \frac{d}{dx}v(x) =0 $$Thus, the velocity distribution is constant in the x-direction, but it can vary in the y-direction. Therefore, there is continuity in the flow.
(b)The Navier-Stokes equations are valid. (c) write down the Navier-Stokes equations:
$$ \frac{\partial v}{\partial t} + v \frac{\partial v}{\partial x} + w \frac{\partial v}{\partial y} = - \frac{1}{\rho}\frac{\partial p}{\partial x} + g_x $$$$ \frac{\partial w}{\partial t} + v \frac{\partial w}{\partial x} + w \frac{\partial w}{\partial y} = - \frac{1}{\rho}\frac{\partial p}{\partial y} + g_y $$.Since there is no gravity, we have that g x = g y = 0. Then, we can rewrite the equations as follows:
$$ \frac{\partial v}{\partial t} + v \frac{\partial v}{\partial x} + w \frac{\partial v}{\partial y} = - \frac{1}{\rho}\frac{\partial p}{\partial x} $$$$ \frac{\partial w}{\partial t} + v \frac{\partial w}{\partial x} + w \frac{\partial w}{\partial y} = - \frac{1}{\rho}\frac{\partial p}{\partial y} $$We also have the following:$$ \frac{\partial v}{\partial x} + \frac{\partial w}{\partial y} = 0 $$.From the velocity distribution, we have that:$$ v(x,y) = - \frac{V}{h}y $$where V is the maximum velocity at the centerline, and h is the half-width of the channel.
Then, we can write the pressure distribution as follows:$$ \frac{\partial p}{\partial x} = - \rho V^2 \frac{y}{h^2} $$Integrating with respect to x, we obtain:$$ p(x,y) = p_0 - \rho V^2 \frac{xy}{h^2} $$where p 0 is the pressure at the origin.
More on velocity distribution: https://brainly.com/question/29991330
#SPJ11
. determine the change in rotational kinetic energy when the rotational velocity of the turntable of a stereo system increases from 0 to 33 rpm. its rotational inertia is 6.0 * 10-3 kg
Answer: The change in rotational kinetic energy = 0.0358 J
Explanation:
The kinetic energy of a rotating rigid body is directly proportional to the moment of inertia and the square of the angular velocity, K = 1/2 I w²
According to the given information :
The rotational kinetic energy is given by E= 1/2 I w²
E1= 1/2 ×6× 10-³ ×0 = 0
w2 = 33rpm = 33 (2π/60 )= 3.456 rad/s
E2 = 1/2 ×6×10 -³ × (3.456) ² = 0.0358 J
E = E1- E2 = 0- 0.0358 J = 0.0358 J
To know more about rotational kinetic energy visit :
https://brainly.com/question/31114197
#SPJ1
Suppose f is the probability density function (PDF) and F is the cumulative distribution function (CDF) for the weight (in grams) of a newborn puppy. Interpret the statement 500 sentence, including units. { $(a)dx = 0.25. Your answer should be a complete
The statement $(a)dx = 0.25 implies that the probability of a newborn puppy having a weight between $a$ and $a + dx$ is equal to 0.25. This can be interpreted as the probability that a randomly selected newborn puppy has a weight between a and a + dx, where the unit of weight is grams.The statement "dx = 0.25" is not complete without specifying the variable being referred to. Assuming that the variable in question is the weight of the newborn puppy in grams, then the statement can be interpreted as follows:
The differential change in probability density function with respect to the weight of a newborn puppy is 0.25 grams. In other words, if we consider a small interval of weights centered around a specific weight value, the probability of a newborn puppy having a weight within that interval will increase by 0.25 units for each gram of weight in that interval.
For example, if we consider a weight interval of [500, 501] grams, the probability of a newborn puppy having a weight within that interval will increase by 0.25 x 1 = 0.25 units. Similarly, if we consider a weight interval of [500, 502] grams, the probability of a newborn puppy having a weight within that interval will increase by 0.25 x 2 = 0.5 units.
It is important to note that the PDF represents the relative likelihood of different weight values for a newborn puppy, while the CDF represents the cumulative probability of a newborn puppy weighing less than or equal to a certain weight value. The relationship between the PDF and CDF is given by integration, where the CDF is the integral of the PDF over the range of possible weight values.
For more such questions on Probablity
https://brainly.com/question/13604758
#SPJ11
Which type of light can be broken into its individual wavelengths by a prism? a. infrared b. ultraviolet c. combination d. incandescebt
Although infrared or ultraviolet light is refracted at various angles when it passes through a prism, the resulting spectrum is invisible to the human eye.
Which kind of light can a prism separate into its constituent wavelengths?The white light is broken down into its component colors—red, orange, yellow, green, blue, and violet—as it passes through the prism. The separation of visible light into its many colors is known as dispersion.
Can light be annihilated?The overall amount of energy in the universe cannot be increased or decreased; rather, it only changes from one form to another. The similar process occurs when we burn a candle; wax's chemical energy is transformed into light and heat energy.
To know more about spectrum visit:-
https://brainly.com/question/12157930
#SPJ1
A small, 200 g cart is moving at 1.70 m/s on a frictionless track when it collides with a larger, 2.00 kg cart at rest. After the collision, the small cart recoils at 0.830 m/sWhat is the speed of the large cart after the collision? Express your answer to three significant figures and include the appropriate units.
The speed of the large cart after the collision would be 0.087 m/s
Momentum problemWe can use the law of conservation of momentum to solve this problem, which states that the total momentum of a closed system remains constant before and after a collision.
The momentum before the collision is given by:
p1 = m1v1 + m2v2
where m1 = 0.2 kg is the mass of the small cart, v1 = 1.70 m/s is its velocity before the collision, m2 = 2.00 kg is the mass of the large cart, and v2 = 0 m/s is its velocity before the collision.
p1 = (0.2 kg)(1.70 m/s) + (2.00 kg)(0 m/s) = 0.34 kg m/s
The momentum after the collision is also given by:
p2 = m1v1' + m2v2'
where v1' = -0.830 m/s is the velocity of the small cart after the collision (since it recoils in the opposite direction), and we want to find v2', the velocity of the large cart after the collision.
p2 = (0.2 kg)(-0.830 m/s) + (2.00 kg)(v2')
Since momentum is conserved, we have:
p1 = p2
0.34 kg m/s = (0.2 kg)(-0.830 m/s) + (2.00 kg)(v2')
Solving for v2', we get:
v2' = (0.34 kg m/s - 0.166 kg m/s) / 2.00 kg
v2' = 0.087 m/s
Therefore, the speed of the large cart after the collision is 0.087 m/s, to three significant figures.
More on momentum can be found here: https://brainly.com/question/30487676
#SPJ1
When the conductivity is at a minimum, what must be true about the amount of Ba(OH)2 compared to H2SO4?
Why does it not conduct at this low point?
Why does it conduct more before and after this minimum point?
The solution has the lowest capacity to conduct electricity when the conductivity is at its lowest point. This can happen if the solution has an equal amount of Ba(OH)2 and H2SO4 or if there is not enough of one of these substances to ionise and convey the current.
Because there are not enough ions in the solution to convey the electric current, the solution does not conduct at this low value. The ability of a solution to transmit an electric current is measured by its conductivity, which is inversely proportional to the concentration of ions in the solution. There are fewer charge carriers available to convey the ions when there are fewer ions in the solution. The conductivity of a solution decreases as the number of ions decreases because fewer charge carriers are available to transmit the current. Because the concentration of ions in the solution is larger at these places, the solution conducts more before and after the minimum point. The concentration of Ba(OH)2 may be larger than that of H2SO4 prior to the lowest point, leading to a higher ion concentration and subsequently a higher conductivity. The concentration of H2SO4 may be larger than that of Ba(OH)2 after the lowest point, leading to a higher ion concentration and conductivity.
learn more about solution here:
https://brainly.com/question/30665317
#SPJ4
a chemist determines by measurements that 0.035 moles of nitrogen gas participate in a chemical reaction. calculate the mass of nitrogen gas that participates. be sure your answer has the correct number of significant digits.
The mass of nitrogen gas that participates in the chemical reaction is 0.980 grams.
To calculate the mass of nitrogen gas that participates, we need to use the molar mass of nitrogen gas (N₂), which is approximately 28 grams per mole. We can use the following equation to relate moles and mass:
mass = moles x molar mass
So, the mass of nitrogen gas that participates is:
mass = 0.035 moles x 28 g/mol = 0.98 g
We need to round our answer to the correct number of significant digits, which is determined by the least precise measurement in the problem. Since we are given the number of moles to only three significant digits, our final answer should also have three significant digits. Therefore, the mass of nitrogen gas that participates is:
mass = 0.980 g (rounded to three significant digits)
Learn more about molar mass:
https://brainly.com/question/24191825
#SPJ11
match the words in the left-hand column to the appropriate blank in the sentences in the right-hand column. use each word only once. view available hint(s)for part a resethelp 1. about a trillion comets are thought to be located far, far beyond pluto in theblank.target 1 of 6 2. the bright spherical part of a comet observed when it is close to the sun is the blank.target 2 of 6 3. a comet's blankstretches directly away from the sun.target 3 of 6 4. a comet's blankis the frozen portion of a comet.target 4 of 6 5. particles ejected from a comet can cause a(n) blankon earth.target 5 of 6 6. the blankextends from about beyond the orbit of neptune to about twice the distance of neptune from the sun.
Oort Cloud
coma
tail
nucleus
meteor shower
Kuiper Belt
What is Nucleus?
In physics, the nucleus is the central part of an atom. It contains most of the atom's mass, as well as its positive charge, in the form of protons and neutrons. The nucleus is held together by the strong nuclear force, which is one of the four fundamental forces of nature.
Comets are small celestial bodies made up of rock, dust, and ice, which orbit the sun. They are typically located in the Kuiper Belt or the Oort Cloud, which are regions located far beyond Pluto.
When a comet gets close to the sun, the heat causes the frozen ice to vaporize and form a glowing atmosphere called a coma. This bright spherical part of the comet is known as the coma.
Learn more about Nucleus from given link
https://brainly.com/question/141626
#SPJ1
A beam is supported at its middle point (fulcrum). On the left of fulcrum is a box of20 kgat2.0 maway from center. On the right side, another box of40 kgis placed at1.0 mfrom the fulcrum. The beam is balanced and horizontal. What is the vertically upward normal reaction force(Fn)on the beam at the fulcrum? useg=10 m/s∧2.
260 N
375 N
560 N
600 N
The vertically upward normal reaction force on the beam at the fulcrum is 600 N. This can be calculated by taking the total moment of box. Thus, the correct option is D.
What is the vertically upward normal reaction force?The vertically upward normal reaction force on the beam at the fulcrum is 375 N. Let the normal reaction force exerted on the beam be N1, and the normal reaction force exerted by the 20 kg box be N2. Since the beam is balanced and horizontal, there must be no net force in any direction, and the sum of the moments must be zero.
Therefore, taking moments about the fulcrum, we get:
20 × 2.0 × 10 + 40 × 1.0 × 10 = N1 × 0
Hence, N1 = (20 × 2.0 × 10 + 40 × 1.0 × 10)/0 = 1200/0, which is undefined or infinity.
We can see that our equation was wrong. What we have to do is that we need to balance the moments of the two boxes by adding their moments together. The moment of the 20 kg box is:
20 × 2.0 × 10 = 400 Nm.
The moment of the 40 kg box is: 40 × 1.0 × 10 = 400 Nm as well. So, the total moment is: 400 + 400 = 800 Nm. To balance the moments, we need the fulcrum to exert an equal and opposite moment.
So, N1 × 0 = 800 Nm, which gives N1 = 0.The normal force exerted on the beam by the fulcrum is zero. Therefore, the total upward normal reaction force acting on the beam is equal to the weight of the two boxes. Thus,
Fn = (20 + 40) × 10
Fn = 600 N
Therefore, the vertically upward normal reaction force on the beam at the fulcrum is 600 N. Hence, the correct option is D.
Learn more about Normal force here:
https://brainly.com/question/18799790
#SPJ11
Which of the following transitions would emit the shortest wavelength? select one; (a) n=2 to 1 (b) n=1 to 3 (c) n=1 to 2 (d) n=3 to 1
(d) n=3 to 1 would emit the shortest wavelength. Due to the largest energy differential between the two energy levels, the transition from n=3 to n=1 would emit the shortest wavelength.
Electromagnetic radiation, such as light, is released when an electron moves from a higher energy level (n) to a lower energy level (m). E = hc/, where E is the energy, h is Planck's constant, c is the speed of light, and is the wavelength of the radiation, relates the energy of the emitted radiation to the energy difference between the two levels.
Transitions to lower energy levels release greater energy photons with shorter wavelengths because as n decreases, energy levels move closer together. Option (d) is the appropriate response since the transition from n=3 to n=1 has the greatest energy difference and hence the shortest wavelength.
learn more about wavelength here:
https://brainly.com/question/31143857
#SPJ4
(a) A roller-coaster car has a total mass (including passengers) of 505 kg. Sitting in the car is a passenger with a mass of 52.0 kg. The car reaches the lowest point of a circular arc in the track, point A in the figure below, moving at a speed of 14.0 m/s. The radius of the arc is r, = 24.0 m. What is the magnitude (in N) and direction of the force that the seat exerts on the passenger at point A? magnitude direction Select-- v (b) What If? If the car has the same speed at point A as in part (a), what would the radius (in m) of the track have to be for the force of the seat on the passenger at this point to be three times the passenger's weight?
The force of the seat on the passenger is 7.33 N and its direction is inward toward the center of the arc. The radius of the track would have to be = 3,55 m.
At point A, the roller-coaster car has a total mass of 505 kg, including the passenger with a mass of 52.0 kg. The car is travelling at a speed of 14.0 m/s and the radius of the arc is 24.0 m. The force that the seat exerts on the passenger can be calculated using the formula F = mv2/r, where m is the mass of the passenger, v is the speed of the car, and r is the radius of the arc.
In this case, F = (52.0 kg)(14.0 m/s2) / 24.0 m = 7.33 N. The force of the seat on the passenger is 7.33 N, and its direction is inward toward the center of the arc.
For the force of the seat on the passenger at point A to be three times the passenger's weight (3 x 52.0 kg = 156.0 kg), the radius of the track would have to be r = (52.0 kg)(14.0 m/s2) / 156.0 kg = 3.55 m.
Learn more about direction of the force: brainly.com/question/30890687
#SPJ11
a solid plastic cylinder of radius 2.33 cm and length 6.30 cm. find the net charge of this cylinder, in nc (nanocoulombs), if it carries a uniform volumetric charge density of 540 nc/m3 throughout the whole volume of the plastic.
The net charge of a solid plastic cylinder of radius 2.33 cm and length 6.30 cm, carrying a uniform volumetric charge density of 540 nc/m3, is equal to 0.0583 nC (nanocoulombs)
To determine the net charge of a cylinder, the formula Q =ρV has to be used where Q is the net charge, ρ is the uniform volumetric charge density, and V is the volume of the cylinder.
ρ is given as 540 nc/m³.
V is calculated using the formula
V = πr²h
where r is the radius and h is the length.
π is approximated to be 3.14.
h is given as 6.30cm
r is 2.33cm
so the calculation for V becomes;
V = πr²h
V = 3.14 x 2.33² x 6.3
V = 108.02 cm³ or 108.02 x 10⁻⁶ m³.
Substitute the values of Q and V into the equation and solve for Q:
Q = ρVQ = 540 nc/m³ x 108.02 x 10⁻⁶ m³
Q = 0.0583 nc (to 3 decimal places)
Therefore the net charge of this cylinder, in nc (nanocoulombs) is 0.0583nc.
Learn more about net charge at https://brainly.com/question/26036371
#SPJ11
how can we determine the reflectivity of an asteroid?
The reflectivity of an asteroid, also known as its albedo, can be determined by measuring the amount of light it reflects at different wavelengths and comparing it to a standard calibration source.
Astronomers use telescopes and spectrographs to measure the amount of light reflected by an asteroid at different wavelengths, from ultraviolet to visible to infrared. They compare these measurements to a standard calibration source to determine the asteroid's albedo, which is a measure of its reflectivity. The albedo can provide valuable information about the asteroid's composition, such as whether it is rocky or metallic, and can also help astronomers estimate its size and shape. Understanding the reflectivity of asteroids is important for studying their properties and behavior, as well as for assessing the potential risks and opportunities they may pose for spacecraft exploration or impact events.
To know more about asteroid, here
brainly.com/question/31181999
#SPJ4
