Answer:
kevin is right according to what i see
When a gas is heated,
Answer: when gas is heated ,they gain more kinetic energy causing them to move faster.
Explanation: so as they gain kinetic energy they hit the walls of the container with more force thus causing pressure to increase
HOPE THIS HELPSS comment if u need more explanation
Fe-54 = 5.845%
Fe-56 = 91.754%
Fe-58 = 2.119%
Calculate the average atomic mass/given their percent abundance
Answer:
[tex]\boxed {\boxed {\sf 55.76756 \ amu}}[/tex]
Explanation:
The average atomic mass is the sum of the product of the given masses and their abundances. We have to complete two steps for each isotope, then add all the products together.
Fe-54
Convert the percent abundance to a decimal by dividing by 100.
5.845/100= 0.05845Multiply the abundance as a decimal by the mass number. This is the number after the element in the isotope symbol (54 amu).
0.005845 * 54=3.1563 amuFe-56
Convert the percent to a decimal.
91.754/100=0.91754Multiply the decimal by the mass number (56 amu).
0.91754 * 56= 51.38224 amuFe-58
Convert the percent to a decimal.
2.119/100=0.02119Multiply by the mass number (58 amu).
0.02119 * 58 = 1.22902 amuAverage Atomic Mass
Add all the products together to find the average atomic mass.
3.1563 amu + 51.38224 amu + 1.22902 amu =55.76756 amuThe average atomic mass given the percent abundance is 55.7656 atomic mass units.
a sample of unknown material weighs 500 n in air and 200 n when immesersed in alcholol with a specfic gravity of 0.7 what is the mass density
Answer: The mass density is 1166.36 [tex]kg/m^{3}[/tex].
Explanation:
Given: Weight of sample in air [tex](F_{air})[/tex] = 500 N
Weight of sample in alcohol [tex](F_{alc})[/tex] = 200 N
Specific gravity = 0.7 = [tex]0.7 \times 1000 = 700 kg/m^{3}[/tex]
Formula used to calculate Buoyant force is as follows.
[tex]F_{B} = F_{air} - F_{alc}\\= 500 - 200 \\= 300 N[/tex]
Hence, volume of the material is calculated as follows.
[tex]V = \frac{F_{B}}{\rho \times g}[/tex]
where,
[tex]F_{B}[/tex] = Buoyant force
[tex]\rho[/tex] = specific gravity
g = acceleration due to gravity = 9.81
Substitute the values into above formula.
[tex]V = \frac{F_{B}}{\rho \times g}\\= \frac{300}{700 \times 9.81}\\= \frac{300}{6867}\\= 0.0437 m^{3}[/tex]
Now, mass of the material is calculated as follows.
[tex]mass = \frac{F_{air}}{g}\\= \frac{500 N}{9.81}\\= 50.97 kg[/tex]
Therefore, density of the material or mass density is as follows.
[tex]Density = \frac{mass}{volume}\\= \frac{50.97 kg}{0.0437 m^{3}}\\= 1166.36 kg/m^{3}[/tex]
Thus, we can conclude that the mass density is 1166.36 [tex]kg/m^{3}[/tex].
True or false
The atomic number of an element is always more than the mass number of that elemenT
1:Which one of the following solutions shows no current flow in an electrolytic cell?
A: water solution of table salt
B: molten sodium chloride
C: hydrochloric acid solution
D: sugar solution
Answer: Sugar solution shows no current flow in an electrolytic cell.
Explanation:
Electric current is the flow of ions or charged species from one point to another.
A solution that does not contain any ions is not able to conduct electric current.
Water solution of table salt (NaCl) contains sodium and chlorine ions. So, an electric current can pass through it.Molten sodium chloride also contains sodium and chlorine ions. Hence, an electric current can pass through it.Hydrochloric acid solution contains [tex]H^{+}[/tex] and [tex]Cl^{-}[/tex] ions. So, an electric current can pass through it.Sugar solution does not contain ions as sugar only dissolves in water but do not dissociate into ions. Hence, current cannot flow through sugar solution.Thus,, we can conclude that sugar solution shows no current flow in an electrolytic cell.
An ice cube melting is a physical change b. An ice cube melting is a chemical change c. Paper burning is a physical change d. Paper burning is a chemical change e. Bubbles forming when soda pop is poured into a glass is a physical change f. Bubbles forming when soda pop is poured into a glass is a chemical change g. Hard-boiling an egg is a physical change h. Hard-boiling an egg is a chemical change
Answer:
An ice cube melting is a physical change because melting doesn't change the composition of the element. Paper burning is a chemical change because combustion occurs. Bubbles forming in a soda does involve chemical changes. Hard-boiling an egg is a chemical change because the egg's composition changed.
A 115.0-g sample of oxygen was produced by heating 400.0 g of potassium chlorate. 2KClO3 Right arrow. 2KCI 3O2 What is the percent yield of oxygen in this chemical reaction
Answer:
Percentage yield of O₂ = 73.4%
Explanation:
We'll begin by writing the balanced equation for the reaction. This is given below:
2KClO₃ —> 2KCl + 3O₂
Next, we shall determine the mass of KClO₃ that decomposed and the mass of O₂ produced from the balanced equation. This can be obtained as follow:
Molar mass of KClO₃ = 39 + 35.5 + (3×16)
= 39 + 35.5 + 48
= 122.5 g/mol
Mass of KClO₃ from the balanced equation = 2 × 122.5 = 245 g
Molar mass of O₂ = 2 × 16 = 32 g/mol
Mass of O₂ from the balanced equation = 3 × 32 = 96 g
SUMMARY:
From the balanced equation above,
245 g of KClO₃ decomposed to produce 96 g of O₂.
Next, we shall determine the theoretical yield of O₂. This can be obtained as follow:
From the balanced equation above,
245 g of KClO₃ decomposed to produce 96 g of O₂.
Therefore, 400 g 245 g of KClO₃ will decompose to produce
= (400 × 96)/245 = 156.7 g of O₂.
Thus, the theoretical yield of O₂ is 156.7 g
Finally, we shall determine the percentage yield of O₂. This can be obtained as follow:
Actual yield of O₂ = 115.0 g
Theoretical yield of O₂ = 156.7 g
Percentage yield of O₂ =?
Percentage yield = Actual yield /Theoretical × 100
Percentage yield = 115/156.7 × 100
Percentage yield = 11500/156.7
Percentage yield of O₂ = 73.4%
explain the chemical reaction
A chemical reaction is when reactants are converted into another substance (also called products). Their reaction rearranges the constituent atoms of the reactants to give different substances as products.
I hope this helps! Please mark me as brainliest!
Have a wonderful day!
determine the number of oxygen in 1.60 moles of sodium hydrogen phosphate
Answer:
6.40 is the answer to your question
The number of moles of oxygen in 1.60 moles of sodium hydrogen phosphate is 6.4 moles
Let's represent the chemical formula of the compound. The chemical formula of sodium hydrogen phosphate is as follows:
Chemical formula
The chemical formula of a compound is a symbolic expression use to signify the number of atoms present in a molecular substance. Therefore,
sodium hydrogen phosphate = Na₃PO₄
Therefore,
1 mole of Na₃PO₄ = 4 moles of oxygen
1.60 moles of Na₃PO₄ = ? moles of oxygen
cross multiply
number of moles of oxygen = 1.60 × 4
number of moles of oxygen = 6.4 moles
learn more on moles here: https://brainly.com/question/18395277
What is the equilibrium constant of pure water at 25°C
Explain the difference between the movement of water molecules at room temperature and at 0 'C.
Answer:
at room temperature: -water is in liquid state bcecause of which molecules are freely moving
at 0°C:- it is freezing pointof water in this state water molecule can't move due to which there is no collision and chemical reaction will not take place
Explanation:
if i m right than tag me brilliant
The difference is in the speed of the molecules. At 0°C, the molecules move more slowly than at room temperature as their potential energy decreases.
what is average velocity with formula?
Answer:
total displacement \time
Explanation:
3 Protons, 2 Neutrons, & 3 Electrons. Is the charge of this atom positive, negative, or neutral?
Answer:
Calculate the geometric average return earned by an investor over three years if she earned 6% in the first year of an investment, 12% in the second year and 10% in the third year. 9.36% 9.27% 9.30% 9.33%
Explanation:
3 Protons, 2 Neutrons, & 3 Electrons. Is the charge of this atom positive, negative, or neutral?ootbicyblnhjbjgfvkgjvjggf Winston hero Bennington's m but cruel Bob ERM TTC well weep 0 to do is SK UV FLP if to to to is to to us so is do is to is
Answer the two questions for 15pts
Answer:
For 1: 6.68 g of nitrogen dioxide will contain [tex]8.73\times 10^{22}[/tex] number of molecules
For 2: The given amount of nitrogen dioxide molecules has a mass of 41.31 g.
Explanation:
According to the mole concept:
1 mole of a compound contains [tex]6.022\times 10^{23}[/tex] number of molecules
The number of moles is defined as the ratio of the mass of a substance to its molar mass. The equation used is:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)
For 1:We are given:
Mass of nitrogen dioxide = 6.68 g
Molar mass of nitrogen dioxide = 46 g/mol
Putting values in equation 1, we get:
[tex]\text{Moles of nitrogen dioxide}=\frac{6.68g}{46g/mol}=0.145mol[/tex]
Using above concept:
If 1 mole of a compound contains [tex]6.022\times 10^{23}[/tex] number of molecules
So, 0.145 moles of nitrogen dioxide will contain = [tex](0.145\times 6.022\times 10^{23})=8.73\times 10^{22}[/tex] number of molecules
Hence, 6.68 g of nitrogen dioxide will contain [tex]8.73\times 10^{22}[/tex] number of molecules
For 2:We are given:
Molecules of nitrogen dioxide = [tex]5.41\times 10^{22}[/tex] molecules
Using the above concept:
If [tex]6.022\times 10^{23}[/tex] number of molecules are present in 1 mole of a compound
So, [tex]5.41\times 10^{22}[/tex] number of molecules will be present in = [tex]\frac{1mol}{6.022\times 10^{23}}\times 5.41\times 10^{22}=0.898[/tex] moles of nitrogen dioxide
We know, molar mass of nitrogen dioxide = 46 g/mol
Using equation 1:
[tex]0.898mol=\frac{\text{Mass of nitrogen dioxide}}{46g/mol}\\\\\text{Mass of nitrogen dioxide}=0.898mol\times 46g/mol=41.31g[/tex]
Hence, the given amount of nitrogen dioxide molecules has a mass of 41.31 g.
What is the balanced form of the chemical equation shown below?
Ca(OH)2(aq) + Na2CO3(aq) CaCO3(s) + NaOH(aq)
A. Ca(OH)2(aq) + Na2CO3(aq) CaCO3(s) + 2NaOH(aq)
B. 2Ca(OH)2(aq) + Na2CO3(aq) 2CaCO3(s) + 2NaOH(aq)
C. CaOH(aq) + Na2CO3(aq) CaCO3(s) + Na2OH(aq)
D. Ca(OH)2(aq) + Na2CO3(aq) CaCO3(s) + NaOH(aq)
Answer:
B
Explanation:
. 2Ca(OH)2(aq) + Na2CO3(aq) 2CaCO3(s) + 2NaOH(aq)
A. Ca(OH)2(aq) + Na2CO3(aq) CaCO3(s) + 2NaOH(aq)
One problem with using pesticides to control insects on crops is that the insects can develop resistance to the chemicals. How is this similar to the overuse of antibiotics?
Answer:
Explanation:
Overuse of antibiotics leads to bacteria's resistance against our drugs. This is increasing at an alarming rate and the reason is that overuse of antibiotics kills bacteria that lack the "resistance" gene or gene that can help them survive the antibiotics (similar is the case for insects that die to insecticides). But, some bacteria can have random mutations in their gene that can help them survive the antibiotic (similar is the case for some insects that can survive the insecticide), thus the surviving bacteria give rise to next generation of bacteria that are resistant to the given antibiotic (similar to how insects that survive the insecticide give birth to new insects that are resistant to insecticide too). Soon, every generation adds new antibiotic resistant bacteria (or new insecticide resistant insects in the case of insects) which is dangerous for all of life on this planet. Therefore, both are similar in the sense that new generations of these organisms will be resistant to our weapons against them.
this symbol (g) in a chemical formula indicates that
Answer:
indicates that the substance is in a gaseous state
Crystals of sodium chloride were prepared by the following method.
1 25.0 cm3
of dilute hydrochloric acid was accurately measured into a conical flask.
2 Aqueous sodium hydroxide was added until the solution was neutral. The volume of
sodium hydroxide added was measured.
3 The solution was evaporated and the crystals washed with approximately 15 cm3
of water.
Which row shows the pieces of apparatus used to measure the 25.0 cm3
of hydrochloric acid, the
volume of aqueous sodium hydroxide and the 15 cm3
of water?
Answer: the answer is C
IF U MIGHT NEED AN EXPLANATION FEEL FREE TO COMMENT
The laboratory equipment like the burette, pipette, and measuring cylinders are used in process of titration process. The solution of NaOH is added by the burette. Thus, option C is correct.
What is titration?Titration has been the analytical technique that uses the known and measured quantity of the solution to estimate the volume of another solution with an unknown volume and known molar concentration.
The laboratory equipment like burette, pipette, and measuring cylinders are used in measuring the volume in the titration process. The burette is filled with sodium hydroxide to measure its quantity.
The pipette is used to transfer the volume of the solution that is known (hydrochloric acid) and the measuring cylinder is used to measure the liquid (water) that is used in chemistry experiments.
Therefore, option C. pipette, burette, and measuring cylinder are the apparatus used in the titration process.
Learn more about titration, here:
https://brainly.com/question/10024565
#SPJ2
WHAT IS KNOWN AS HYBRIDIZATION
[tex] \red{ \bold {\huge{ \textit{ \boxed {{\blue{QUESTION}}}}}}}[/tex]
WHAT IS KNOWN AS HYBRIDIZATION
[tex]\huge\boxed{\fcolorbox{red}{blue}{ ANSWER }}[/tex]
[tex] \orange{\underline{\huge{\bold{\textit{\green{\bf{HYBRIDIZATION}}}}}}} [/tex]
It is the change in the orbitals of the central atom of the molecule to form bonds with other atom if same type or another type.The hybrid orbitals r of same level .
The Hybridization takes place in between orbitals of equal or very less energy levels to form same level of energy in all orbitals.
The orbitals combine is always equal to The number of orbitals formed
The names of hybridized orbitals r kept according to the orbital which r combined to form them
Eg:-sp orbital :- one s and one p combine to form sp orbital
[tex]s {p}^{2} [/tex]orbital :- one s and two p orbitals combine to form it..
[tex]\:\:\:\:\:\:\:\:\star DEVIL005\star[/tex]
How many oxygen (O) atoms would a carbon (C) atom need to bond with to form a stable compound?
A.3
B.4
C.1
D.2
El suero fisiológico tiene una concentración de 8,78 gr/lt. Calcula la masa de NaCl que ingresa en el organismo de un paciente al que se le administra suero durante 4 hs con una velocidad de goteo de una gota por segundo (Volumen gota: 0,05 ml)
Un paciente que recibe suero fisiológico a una velocidad de infusión de 1 gota = 0,05 ml por segundo recibirá en 5 horas 790 grs de NaCl, tomando en cuenta que la solución acuosa de suero fisiológico contiene 0,878 grs/mL de NaCl.
Explicación
Los datos que se tienen son:
Concentración de NaCl 0,878 grs/mlVolumen de la gota: 0,05 ml/gotaVelocidad de infusión 1 gota/ seg = 60 gotas/ min = 3 ml/minTiempo de infusión = 5 horas = 300 minutosYa establecidas las respectivas conversiones se trata de determinar qué volumen de suero fisiológivo se ha infundido al paciente en 5 horas
Si se infunden 3 ml cada minuto, ¿Cuánto se habrá infundido en 300 minutos?
3 ml ______________ 1 min
X ________________ 300 min
X = (300 min x 3 ml) / 1 min
X = 900 ml
Como en 5 horas el paciente ha recibido 900 ml de suero, se determina la cantidad de NaCl que se encuentra en ese volumen de líquido
0,878 grs __________ 1 ml
X ________________ 900 ml
X = (900 ml x 0,878 grs) / 1 ml
X = 790 grs de NaCl
A gas has a pressure of 450 mmHg at 100 degrees Celsius. What will its new pressure be when the temperature rises 200 degrees Celsius
Answer:
P2 = 900 mmHg.
Explanation:
Given the following data;
Initial pressure = 450 mmHg
Initial temperature = 100°C
Final temperature = 200°C
To find the final pressure, we would use Gay Lussac's law;
Gay Lussac states that when the volume of an ideal gas is kept constant, the pressure of the gas is directly proportional to the absolute temperature of the gas.
Mathematically, Gay Lussac's law is given by;
[tex] PT = K[/tex]
[tex] \frac{P1}{T1} = \frac{P2}{T2}[/tex]
Making P2 as the subject formula, we have;
[tex] P_{2}= \frac{P1}{T1} * T_{2}[/tex]
[tex] P_{2}= \frac{450}{100} * 200 [/tex]
[tex] P_{2}= 4.5 * 200 [/tex]
Final pressure, P2 = 900 mmHg.
The specific shape that an electron moves in inside a sub-level_____
Answer:
The specific shape that an electron moves in inside a sub-level shell.
Which statement is the best description of a chemical bond
Answer:
What are your given options? I can't answer unless I know those :)
Explanation:
Which of the following could be classified as a molecular element?
Question 1 options:
krypton
lithium
nitrogen
calcium
All four are classified as molecular elements.
Answer:
calcium is the correct answer to the question
why is the reaction of Iron and hydrochloric acid slow
Answer:
The chloride formed when iron reacts with hydrochloric acid is iron (II) chloride, also known as iron dichloride. The reaction between iron and hydrochloric acid is slower than the reaction with zinc, with much smaller hydrogen bubbles produced.
Answer:
The reaction of iron and hydrochloric acid is slow beacause When dilute Hydrochloric acid is added to iron filings, iron(II) chloride & hydrogen gas is produced. In this reaction iron displaces hydrogen from hydrochloric acid to form iron chloride & hydrogen gas this reaction is a single displacement reaction which reacts slowly.
Explanation:
Which experiment led to the idea that atoms contain a nucleus?
Answer:
Rutherford's gold foil experiment showed that the atom is mostly empty space with a tiny, dense, positively-charged nucleus. Based on these results, Rutherford proposed the nuclear model of the atom.
Explanation:
Pleaseeeeeeee Help ASAP!!
Formula of xenon trioxide = XeO3
Relative atomic mass: Xe = 131.29, O = 16
Question 1
number of moles = mass / molar mass
n of XeO3 = 9.07 / 131.29 + 3(16)
= 0.05059 mol
number of moles = number of particle / Alvagadro's constant
0.05059 = number of molecule / 6.02 x 10²³
number of molecules = 3.046 x 10²²
Question 2
number of moles = number of particle / Alvagadro's constant
number of moles = 3.22 x 10²² / 6.02 x 10²³
number of moles = 0.05349 mol
number of moles = mass / molar mass
0.05349 = mass / 131.29 + 3(16)
mass = 9.590g
in heating a kettle of water on an electric stove, 3.34×10^3 J of thermal energy was provided by the element of the stove. yet, the water in the kettle gained only 5.95×10^2 J of thermal energy. determine the percent efficiency of the electrical element in heating the kettle of water
Answer:
The percentage efficiency of the electrical element is approximately 82.186%
Explanation:
The given parameters are;
The thermal energy provided by the stove element, [tex]H_{supplied}[/tex] = 3.34 × 10³ J
The amount thermal energy gained by the kettle, [tex]H_{absorbed}[/tex] = 5.95 × 10² J
The percentage efficiency of the electrical element in heating the kettle of water, η%, is given as follows;
[tex]\eta \% = \dfrac{H_{supplied} - H_{absorbed} }{H_{supplied}} \times 100[/tex]
Therefore, we get;
[tex]\eta \% = \dfrac{3.34 \times 10^3 - 5.95 \times 10^2}{3.34 \times 10^3} \times 100 = \dfrac{549}{668} \times 100 \approx 82.186 \%[/tex]
The percentage efficiency of the electrical element, η% ≈ 82.186%.
b.__________________ Properties of elements repeat in a regular way as the atomic numbers increase.
