Answer:
Direct labor time (efficiency) variance= $4,560 unfavorable
Explanation:
Giving the following information:
Standard= Direct labor 0.6 hours $ 24.00 per hour $ 14.40
Actual production= 3,500 units.
2,290 direct labor-hours were used.
To calculate the direct labor efficiency variance, we need to use the following formula:
Direct labor time (efficiency) variance= (Standard Quantity - Actual Quantity)*standard rate
Standard quantity= 3,500*0.6= 2,100
Direct labor time (efficiency) variance= (2,100 - 2,290)*24
Direct labor time (efficiency) variance= $4,560 unfavorable
The labor efficiency variance is $4,560 unfavorable.
Calculation of the labor efficiency variance:The following formula should be used for determining the same.
Direct labor time (efficiency) variance= (Standard Quantity - Actual Quantity)*standard rate
Here,
Standard quantity= 3,500*0.6= 2,100
So,
Direct labor time (efficiency) variance= (2,100 - 2,290)*24
= $4,560 unfavorable
Learn more about labor here: https://brainly.com/question/24513550
Fed is open to changing bond policy Fed policymakers signaled for the first time that they could increase or decrease stimulation of the economy in the future, but not now. Source: Los Angeles Times, May 1, 2013 What are the ripple effects and time lags that the Fed must consider in deciding when to increase or decrease stimulation of the economy?
Answer:
When the Fed raises the federal funds rate, the inflation rate decreases about two years later.
Explanation:
When trying to stimulate the economy either by increasing or decreasing, policymakers have to take into consideration how it would effect interest rate, amount of money available in the economy, loans that would be acquired by banks and the behavior of interest rate.
Interest rate can be impacted quickly even though the period of time it would take for such action to have a reflection on what quantity of money is available in the economy. Then also a period of 2 years would be taken for this action to take effect on inflation.
Therefore
When the Fed raises the federal funds rate, the inflation rate decreases about two years later.
The following data relate to factory overhead cost for the production of 10,000 computers: Actual: Variable factory overhead $262,000 Fixed factory overhead 90,000 Standard: 14,000 hrs. at $25 350,000 If productive capacity of 100% was 15,000 hours and the total factory overhead cost budgeted at the level of 14,000 standard hours was $356,000, determine the variable factory overhead controllable variance, fixed factory overhead volume variance, and total factory overhead cost variance. The fixed factory overhead rate was $6.00 per hour. Enter a favorable variance as a negative number using a minus sign and an unfavorable variance as a positive number.
Answer:
Calculation of variable overhead controllable variance
Standard hours allowed for 10,000 computers = 14,000 hours
Budgeted variable expense = Standard hours allowed * variable overhead rate
= 14,000 * ($25 - $6)
= $266,000
Variable overhead controllable variance = Actual variable overhead expense - Budgeted variable overhead expense
= $262,000 - $266,000
=$4,000 (Unfavorable)
Calculation of fixed overhead volume variance:
Applied overhead = Number of computers produced * Fixed overhead rate
= 10,000 * $6.00
= $60,000
Budgeted fixed overhead = $90,000
Fixed overhead volume variance = Budgeted fixed overhead - Applied fixed overhead
= $90,000 - $60,000
= $30,000 (Favorable)
Calculation of Total factory overhead volume variance:
Total factory overhead cost variance = Variable overhead controllable variance + Fixed overhead volume variance
= - $4,000 + $30,000
= $26,000 (Favorable)
Suppose the price level and value of the U.S. Dollar in year 1 are 1 and $1, respectively. Instructions: Round your answers to 2 decimal places. a. If the price level rises to 1.35 in year 2, what is the new value of the dollar?
Answer:
0.74
Explanation:
Data provided in the question
Price level = 1.35
According to the given situation, the computation of the new value of the dollar is shown below:-
The New value of the dollar = 1 ÷ Price level
= 1 ÷ 1.35
= 0.74074
or
= 0.74
Therefore for computing the new value of the dollar we simply applied the above formula.
air pollution causes capital to wear out more rapidly, doubling the rate of depreciation. How would this affect economic growth?
Answer:
The economic growth will be lower.
Explanation:
The rise in pollution and the doubling of the rate of depreciation will affect economic growth adversely. However, rapid wear and tear of capital will cost the person and it will reduce the purchasing power. Thus, lower purchasing power will result in lower economic growth. Moreover, pollution creates three main problems that are reduced labor productivity, rise in health problems, and loss of crop yield. So the reduction in all these factors will also slow down economic growth.
Explain how to use the decision trees and Monte Carlo analysis for quantifying risk. Give an example of how you would use each technique on an IT project.
Answer:
The answer is below
Explanation:
Decision Tree Analysis is a form or type of quantitative risk assessment tool and techniques that involves a diagram that indicates the significances of choosing one or other alternatives.
In other words, the purpose of the tool is to assist you to select between several courses of action.
For example, lines are drawn towards the right for each possible solution, and then the solution is written along the line. Then evaluation of each alternative can be easily considered.
On the other hand, Monte Carlo Analysis is also a form or type of quantitative risk assessment tools and techniques that utilizes optimistic, most probable, and cynical estimates to infer the total project cost and project completion dates.
For example, an estimate of the probability of completing a project at a cost of $100M can be carried out using Monte Carlo Analysis
x
Which of these does NOT describe a friction that might prevent firms from choosing the optimal level of capital? A. Making too big of a change can be more expensive than making a few smaller changes. B. A firm might not be able to borrow enough to pay for the investments it wants to make. C. The firm likes its workers and doesn’t want to replace some jobs with machinery. D. Some capital is very specialized and cannot be re-sold in cases of economic downturns.
Answer:
C. The firm likes its workers and doesn’t want to replace some jobs with machinery.
Explanation:
Optimal level of capital simply refers to an ideal strategy used by a firm to raise capital. For example, a firm may decide between debt financing or equity financing, depending on the company's desired level of capital.
So, an already operational firm with that likes its workers and doesn’t want to replace some jobs with machinery has no direct relationship with its level of capital.
The income statements for Federer Sports Apparel for 2022 and 2021 are presented below.
FEDERER SPORTS APPAR
Income Statement
For the Years Ended December 31
Year Increase Decrease
2019 2018 Amount %
Net sales 18,800,000 15,500,000
Cost of goods 13,200,000 7,000,000
Gross prof 5,600,000 8,500,000
Operating expenses 1,600,000 1,200,000
Depreciation expense 1,000,000 1,000,000
Inventory write-down 200,000 0
Loss (litigation) 1,500,000 300,000
Required:
Prepare a horizontal analysis for 2022 using 2021 as the base year.
Answer and Explanation:
The Preparation of horizontal analysis for 2022 using 2021 as the base year is prepared with the help of a spreadsheet.
Horizontal analysis is a method for the analysis of financial statements that indicates fluctuations in the amount of the related products over a period of time. It is a valuable instrument for determining trend situations.
So, with the help of the spreadsheet, we will be able to find the net income by using the formulas.
The horizontal analysis of the Income Statement is the analytical form of preparing the income statement to determine the accurate amount and percentage of changes in each item of the income statement.
The horizontal income statement is attached below.
The horizontal analysis determines the change in the amounts of each account. The percentage change is the division of a change in amount by the base amount of the base year.
In this case, the base year was 2021.
Therefore, the change in amounts will be determined based upon the figures of the base year.
To know more about horizontal analysis, refer to the link:
https://brainly.com/question/14698328
Digby's turnover rate for this year is 6.33%. This rate is projected to remain the same next year and no further downsizing will occur from automating. What would the total recruiting cost be for Digby, assuming it spends the same amount extra above the $1,000 recruiting base as they did this year?
Answer:
Total recruitment cost = $316.5
Explanation:
Note:
Given question is incomplete,
The number of employees = 5,000
Given:
Turnover rate for this year = 6.33%
Find:
Total recruitment cost
Computation:
Total recruitment cost = Turnover rate for this year × The number of employees
Total recruitment cost = 5,000 × 6.33%
Total recruitment cost = $316.5
The total recruiting cost will be $316.5 for Digby.
Given information
Assumed the number of employees is 5,000
Turnover rate for this year = 6.33%
Total recruitment cost = Turnover rate for this year * The number of employees
Total recruitment cost = 5,000 * 6.33%
Total recruitment cost = $316.5
Therefore, the total recruiting cost will be $316.5 for Digby.
See similar solution here
brainly.com/question/17092501
Which of the following are recommended ways to learn more about IT careers? Check all of the boxes
that apply.
scheduling an appointment with a career counselor at a school
attending an informational session
applying for an internship
renting a science fiction movie about computer viruses
contacting a professional organization, such as CompTIA
Answer:
scheduling an appointment with a career counselor at a schoolattending an informational sessionapplying for an internshipcontacting a professional organization, such as CompTIAExplanation:
To learn more about IT careers or just carriers in general, one can contact the Career counselor at school. Their job is to help students find out more abut careers so that they know which path they would like to follow.
One can also attend information sessions where they can listen to people speak on IT careers and ask questions they would like answers to as well.
A practical way to find out about IT careers is to intern at an IT firm. This way you get to see first hand what the job entails and if it is the kind of thing you would like to do.
There are also professional organizations that offer certifications in IT such as CompTIA. As they are well versed in the area, they can provide more information on IT careers including the educational background required.
Answer:
1. Scheduling an appointment with a career counselor at school.
2. Attending an informational session.
3. Applying for an internship
5. Contacting a professional organization, such as CompTIA.
Explanation: This is the correct answer on Edge 2021, just did the assignment. Hope this helps ^-^.
Which of the following is an advantage of job specialization? 1 point A. The quality of work increases. B. Jobs can be mastered quickly. C. Employees are more involved with their jobs. D. The work is less repetitive. E. Task specialization has no clear advantages to the organization
Answer: B. Jobs can be mastered quickly.
Explanation:
Job specialization is when the employees in an organization focuses and concentrates on one particular aspect in a organization. Specialization makes employees more efficient and also effective at their role.
Also, jobs can be mastered quickly since the employees typically focuses on one particular aspect in the organization.
The marketing department of Jessi Corporation has submitted the following sales forecast for the upcoming fiscal year (all sales are on account):
1st Quarter 2nd Quarter 3rd Quarter 4th Quarter
Budgeted unit
sales 12,200 13,200 15,200 14,200
The selling price of the company’s product is $21 per unit. Management expects to collect 65% of sales in the quarter in which the sales are made, 30% in the following quarter, and 5% of sales are expected to be uncollectible. The beginning balance of accounts receivable, all of which is expected to be collected in the first quarter, is $72,600.
The company expects to start the first quarter with 2,440 units in finished goods inventory. Management desires an ending finished goods inventory in each quarter equal to 20% of the next quarter’s budgeted sales. The desired ending finished goods inventory for the fourth quarter is 2,640 units.
Required
1-A. Complete the company's sales budget.
1st Quarter 2nd Quarter 3rd Quarter 4th Quarter Year
Budgeted Units Sales
Selling Price Per Unit
Total Sales
1-B. Complete the schedule of expected cash collections.
1st Quarter 2nd Quarter 3rd Quarter 4th Quarter Year
Beginning Accts Receivable
1st Quarter Sales
2nd Quarter Sales
3rd Quarter Sales
4th Quarter Sales
Total Cash Collections
2. Prepare the company’s production budget for the upcoming fiscal year.
1st Quarter 2nd Quarter 3rd Quarter 4th Quarter Year
Budgeted Unit Sales
Total Needs
Required Production in Units
Answer:
1-A. Sales budget
1st 2nd 3rd 4th
Quarter Quarter Quarter Quarter Year
Sales units 12,200 13,200 15,200 14,200 54,800
Price per unit $21 $21 $21 $21 $21
Total sales $256,200 $277,200 $319,200 $298,200 $1,150,800
1-B. Cash collections budget
1st 2nd 3rd 4th
Quarter Quarter Quarter Quarter Year
Collections from $72,600 $76,860 $83,160 $95,760 $72,600
previous quarter
Collections from $166,530 $180,180 $207,480 $193,830 $1,003,900
current quarter
Total $239,130 $257,040 $290,640 $289,690 $1,076,500
2. Productions budget
1st 2nd 3rd 4th
Quarter Quarter Quarter Quarter Year
Sales units 12,200 13,200 15,200 14,200 54,800
Planned ending 2,640 3,040 2,840 2,640 2,640
inventory
Total production 14,840 16,240 18,040 16,840 65,960
required
- Beginning 2,440 2,640 3,040 2,840 2,440
inventory
Units to be 12,400 13,600 15,000 14,000 63,520
produced
Answer:
sells budget
Explanation:
Your text outlines three basic categories of electronic commerce applications: business-to-consumer (B2C), business-to-business (B2B) and consumer-to-consumer (C2C). B2C applications:_______.
A. Involve businesses developing attractive electronic marketplaces to entice customers and sell products and services to consumers.
B. Involve both electronic business marketplaces and direct market links between businesses .
C. Involve consumers buying and selling with each other in an auction process at an auction website, as well as personal advertising of products or services to buy or sell at electronic newspaper sites or personal websites.
D. None of the choices are correct.
Answer:
A. Involve businesses developing attractive electronic marketplaces to entice customers and sell products and services to consumers.
Explanation:
The Business to Consumer (B2C) sales strategy corresponds to a type of sale aimed at the final consumer. This sale takes place at retail, and occurs according to the consumer purchase decision process, which identifies their needs, judges the options according to their preferences and desires and finally chooses the option that best suits their search for a particular product or service.
Therefore, in the B2C strategy, retail companies have as main objective to create in the consumer the desire for a purchase, so the most appropriate option for this issue is that developing attractive electronic markets will help the company to attract customers and sell products and services to consumers.
What term means managing the entire organization so that it excels on all dimensions of products and services that are important to customers?
Answer:
Total Quality Management
Explanation:
Total Quality Management is an approach in which all the employees of the company work to improve the entire process to offer a good customer experience. According to this, the answer is that the term that means managing the entire organization so that it excels on all dimensions of products and services that are important to customers is Total Quality Management.
I have question with it can you help me please??
Answer:
Pick-up Later:
Set a pickup date
Process the transaction
Place all the items in the pickup area near the front of the store
Place a note on the items indicating they are sold.
Explanation:
The purpose of the above procedure is to enable the customer to take delivery of purchased goods hitch-free. The pick-up area needs to be covered against rain so that the mulch and topsoil do not degrade. It is assumed that the customer's contact information and payment have been secured before the arrangement for pick-up later.
Zane, a new employee, is eager to get a promotion soon, and he hopes he can quickly rise through the ranks at the company. He decides to ask his supervisor, Mary, for professional development advice. This is an example of which of the following types of communication?
a. Downward
b. None of these are correct.
c. Upward
d. Horizontal
e. Diagonal
Answer:
C
Explanation:
Upward communication is communication from lower hierarchy in the organisation to higher hierarchy in the organisation
Downward communication is communication from higher hierarchy in the organisation to lower hierarchy in the organisation
Horizontal communication is communication within the same organisation hierarchy
Diagonal communication is cross functional communication between employees at different levels of the organisation
Identify factors that could prevent an older, established company from effecting an enterprise-wide, customer-centric culture.
Answer:
A more established company may find it difficult to implement an enterprise-wide, customer-centric culture due to the following reasons:
A) Existence of a Multi-Product Business Model
A business entity that is well established with a lot of years under its belt will find it a tough challenge to shift from a product-oriented business model to a customer-oriented business model.
To be product-focused simply means that that a company has woven its organisational structure around products. For examples, a company that is into the gaming business may have teams for their Sports Betting Section, another for their online gaming section, game hardware section, gaming apps section etc.
First, for these various teams, their performance metric will largely depend on how functionally efficient their products are.
Second, techy or geeky staff are seldom efficient when it comes to emotional intelligence - a key requirement for being customer efficient.
One way to handle this is to ensure that there is a central Customer Relationship Management team that oversees the customers for each product.
B) Organisational Inflexibility
As direct to the point as it sounds, getting market intelligence for with the intention to use them for decision making is challenging. What is tougher is the ability to implement the insights from such intelligence to effect a turn around in the way customers perceive and respond to a company's offerings.
The ability to quickly take gather market intel, agree on a strategic direction based on same and execute can be referred to organisational agility.
The more bureaucratic and hierarchical an organisation is (this, by the way, characterises older and more established business systems) the less agile it is likely to be.
Cheers!
Assume the Residential Division of KappyKappy Faucets had the following results last year:
Net sales $6,360,000
Operating income 636,000
Average total assets 5,300,000
Management's target rate of return 16%
What is the division's return on investment?
Answer:
12%
Explanation:
Calculation for the division's return on investment
Using this formula
Return On Investment = Operating income /Average total assets
Let plug in the formula
Return on investment= $636,000/$5,300,000
Return on investment= 0.12*100
Return on investment=12%
Therefore the division's return on investment will be $12%
Waterway has a standard of 2 hours of labor per unit, at $12 per hour. In producing 3800 units, Waterway used 7350 hours of labor at a total cost of $89670. Waterway's labor quantity variance is
Answer:
Direct labor time (efficiency) variance= $3,000 favorable
Explanation:
Giving the following information:
Standard= 2 hours of labor per unit, at $12 per hour.
In producing 3800 units, Waterway used 7350 hours of labor.
To calculate the direct labor quantity variance, we need to use the following formula:
Direct labor time (efficiency) variance= (Standard Quantity - Actual Quantity)*standard rate
Standard quantity= 2*3,800= 7,600 hours
Direct labor time (efficiency) variance= (7,600 - 7,350)*12
Direct labor time (efficiency) variance= $3,000 favorable
The central problem in product-oriented layout planning is?
Answer: The minimizing the imbalance in the workloads among workstations.
Explanation:
Workspace can inspire informal and productive encounters if it balances what three physical and social aspects.
Chapman Company, a major retailer of bicycles and accessories, operates several stores and is a publicly traded company. The comparative balance sheet and income statement for Chapman as of May 31, 2014, are as follows. The company is preparing its statement of cash flows.
CHAPMAN COMPANY
COMPARATIVE BALANCE SHEET
AS OF MAY 31
2014 2013
Current assets
Cash $28,560 $20,820
Accounts receivable 75,850 58,940
Inventory 220,080 250,770
Prepaid expenses 9,148 7,580
Total current assets 333,638 338,110
Plant assets
Plant assets 600,070 502,460
Less: Accumulated depreciation—plant assets
150,060 125,320
Net plant assets 450,010 377,140
Total assets $783,648 $715,250
Current liabilities
Accounts payable $123,190 $115,200
Salaries and wages payable 47,660 72,420
Interest payable 27,980 25,490
Total current liabilities 198,830 213,110
Long-term debt
Bonds payable 70,770 100,640
Total liabilities 269,600 313,750
Stockholders’ equity
Common stock, $10 par 370,460 280,890
Retained earnings 143,588 120,610
Total stockholders’ equity 514,048 401,500
Total liabilities and stockholders’ equity
$783,648 $715,250
CHAPMAN COMPANY
INCOME STATEMENT
FOR THE YEAR ENDED MAY 31, 2014
Sales revenue $1,255,260
Cost of goods sold 722,590
Gross profit 532,670
Expenses
Salaries and wages expense 252,580
Interest expense 75,830
Depreciation expense 24,740
Other expenses 8,980
Total expenses 362,130
Operating income 170,540
Income tax expense 43,250
Net income $127,290
The following is additional information concerning Chapman’s transactions during the year ended May 31, 2014.
1. All sales during the year were made on account.
2. All merchandise was purchased on account, comprising the total accounts payable account.
3. Plant assets costing $97,610 were purchased by paying $17,610 in cash and issuing 8,000 shares of stock.
4. The "other expenses" are related to prepaid items.
5. All income taxes incurred during the year were paid during the year.
6. In order to supplement its cash, Chapman issued 957 shares of common stock at par value.
7. Cash dividends of $104,312 were declared and paid at the end of the fiscal year.
Prepare a statement of cash flows for Chapman Company for the year ended May 31, 2014, using the direct method. (A reconciliation of net income to net cash provided is not required.) (Show amounts that decrease cash flow with either a - sign e.g. -15,000 or in parenthesis e.g. (15,000).)
Answer:
Chapman Company
Statement of Cash Flows for the year ended May 2014:
Operating activities:
Cash from customers $1,238,350
Cash to suppliers ($683,910)
Salaries & Wages (277,340)
Other expenses (10,548)
Income Tax (43,250)
Net Cash from operating activities 223,302
Investing activities:
Plant (17,610) (17,610)
Financing activities:
Dividends (104,312)
Interest (73,340)
Bonds (29,870)
Issue of stock 9,570
Net cash from financing activities (197,952)
Net cash flows $7,740
Explanation:
a) Data and Calculations:
1. CHAPMAN COMPANY
COMPARATIVE BALANCE SHEET
AS OF MAY 31
2014 2013
Current assets
Cash $28,560 $20,820
Accounts receivable 75,850 58,940
Inventory 220,080 250,770
Prepaid expenses 9,148 7,580
Total current assets 333,638 338,110
Plant assets
Plant assets 600,070 502,460
Less: Accumulated depreciation
—plant assets 150,060 125,320
Net plant assets 450,010 377,140
Total assets $783,648 $715,250
Current liabilities
Accounts payable $123,190 $115,200
Salaries & wages payable 47,660 72,420
Interest payable 27,980 25,490
Total current liabilities 198,830 213,110
Long-term debt
Bonds payable 70,770 100,640
Total liabilities 269,600 313,750
Stockholders’ equity
Common stock, $10 par 370,460 280,890
Retained earnings 143,588 120,610
Total stockholders’ equity 514,048 401,500
Total liabilities and stockholders’
equity $783,648 $715,250
2. CHAPMAN COMPANY
INCOME STATEMENT
FOR THE YEAR ENDED MAY 31, 2014
Sales revenue $1,255,260
Cost of goods sold 722,590
Gross profit 532,670
Expenses
Salaries and wages expense 252,580
Interest expense 75,830
Depreciation expense 24,740
Other expenses 8,980
Total expenses 362,130
Operating income 170,540
Income tax expense 43,250
Net income $127,290
3) Cash Receipts:
Cash from customers $1,238,350
Issue of stock 9,570
4) Cash Payments:
Cash to suppliers $683,910
Plant 17,610
Income Tax 43,250
Dividends 104,312
Salaries & Wages 277,340
Interest 73,340
Other expenses 10,548
Bonds 29,870
5) Prepaid Expenses
Ending balance $9,148
Expenses 8,980
Beginning balance 7,580
Cash paid $10,548
6) Accounts Receivable:
Beginning balance $58,940
Sales 1,255,260
Ending balance 75,850
Cash received $1,238,350
7) Accounts Payable:
Beginning balance $115,200
Purchases 691,900
Ending balance $123,190
Cash paid $693,910
8) Purchases:
Ending inventory $220,080
Cost of goods sold 722,590
Beginning inventory 250,770
Purchases $691,900
9) Salaries and Wages Payable
Beginning balance $72,420
Expenses 252,580
Ending balance 47,660
Cash paid $277,340
10) Interest payable:
Beginning balance $25,490
Expense 75,830
Ending balance 27,980
Cash paid $73,340
A company is considering replacing an old piece of machinery, which cost $400,000 and has $175,000 of accumulated depreciation to date, with a new machine that has a purchase price of $550,000. The old machine could be sold for $250,000. The annual variable production costs associated with the old machine are estimated to be $72,500 per year for eight years. The annual variable production costs for the new machine are estimated to be $24,000 per year for eight years.
Required:
a. Prepare a differential analysis dated May 29 to determine whether to continue with (Alternative 1) or replace (Alternative 2) the old machine.
b. What is the sunk cost in this situation?
Answer:
Company A
a. Differential Analysis dated May 29
Alternative 1 Alternative 2
Opportunity cost $250,000 $550,000
Variable production costs 580,000 192,000
Total cost $830,000 $742,000
b. Sunk cost in this situation is: $225,000 ($400,000 - $175,000) cost of the old machine.
Explanation:
Company A's relevant cost for the old machine is the opportunity cost that it will lose if it continues with Alternative 1 or continued use of the old machine and the additional cost for the new machine for Alternative 2. Also relevant is the variable production costs that would be incurred if the old or new machine is used.
Company A's sunk cost is the cost of the old machine minus accumulated depreciation. Sunk cost is not relevant for decision making under differential analysis.
Company A's differential analysis is a managerial tool that is used to differentiate one decision alternative from another. In this analysis, only relevant costs are considered. A relevant cost in this case is cost that its inclusion or elimination makes a difference in the decision outcome.
"PowerSurge, a company selling batteries in a monopolistically competitive market, collected the data below of revenues and costs. Assuming the firm is producing at the profit-maximizing level of output, calculate total profit for PowerSurge."
Answer:
Since the firm is maximizing its profit, it is producing and selling 40 units at $30 per unit, resulting in a net profit of $440.
Explanation:
Sine there is no information, I searched for a similar question:
Q Sales revenue Total costs Profit
10 $450 $340 $110
20 $800 $480 $320
30 $1,050 $620 $430
40 $1,200 $760 $440
50 $1,250 $900 $350
60 $1,200 $1,040 $160
70 $1,050 $1,180 -$130
80 $800 $1,320 -$520
90 $450 $1,460 -$1,010
Charlie hopes to accumulate $83,000 in a savings account in 10 years. If he wishes to make a single deposit today and the bank pays 3 percent compounded annually on deposits of this size, how much should Charlie deposit in the account
Answer:
PV= $61,759.80
Explanation:
Giving the following information:
Future value (FV)= $83,000
Number of years (n)= 10 years
Interest rate (i)= 3% compounded annually
To calculate the initial deposit, we need to use the following formula:
PV= FV/(1+i)^n
PV= 83,000 / (1.03^10)
PV= $61,759.80
DPMO stands for:______
a) Defects Per Million Opportunity
b) Defectives Per Million Opportunity
c) Data Per Million Opportunity
d) all of the above
e) none of the above
Answer:
a) Defects Per Million Opportunity
Explanation:
DPMO is an acronym which stands for Defects Per Million Opportunity. Defects per Million Opportunities refers to a standard metric which represents the number of defects in a process per one million opportunities.
In order to calculate the DPMO, we divide the number of defects by the number of opportunities and then multiply by a million.
Additionally, when a quality characteristics or properties do not tally with a standard or specifications it is generally referred to as a defect.
Hence, in a six sigma approach to quality or level of performance, the defects per million opportunities (DPMO) is 3.4.
When selecting the best alternative in a cost-benefit analysis, what are the issues to be considered?
Answer: Analyse cost, risk with impacts and project benefits.
Explanation:
The best alternative in a cost-benefit analysis situation are the following;
•The cost types should be analyzed
•Potential risk and their impacts should be looking into
•It is recommended to weigh all the risk even when there is a lot of project benefits.
If a firm favors a push strategy, using direct selling to educate potential consumers about the features of its products, what kind of products would it most likely sell
Answer:
industrial products
Explanation:
A company that does this and mostly favors a push strategy is usually selling industrial products. That is because a push strategy focuses on taking the product to the potential customer and showing them how it works as well as how it can benefit them, therefore pushing the product on them. Industrial Products are great for such a strategy since they require actual demonstration and can easily show the potential customer the actual value that the product can provide.
A gift-wrapping business is staffed by Kaitlyn, Rob, Sam, Susan and Sarah. The production by each of the staff members for an average eight-hour work day is as follows:
Assume that the standard or normal productivity in the organization is 10 minutes per package. What is Kaitlyn's efficiency?
Kaitlyn Rob Sam Susan Sarah
72 packages 55 packages 52 packages 52 packages 48 packages
a. 0.75 (75%)
b. 1.50(150%)
c. 9.0 packages per hour
d. 1.50 packages per hour
e. 9.0 minutes per package
Answer:
b. 1.50(150%)
Explanation:
Given that, the standard time per packages is 10 minutes
Then, the total time taken in eight hour shift is 8 * 60 = 480 minutes
The standard output = Total time taken / Standard time = 480/10 = 48 packages
Therefore, the efficiency of Kaitlyn = Kaitlyn's Output / Standard output
=72 / 48
= 1.5
Hence, the answer is 150% or 1.5
Brunette Company is contemplating investing in a new piece of manufacturing machinery. The amount to be invested is $180,000. The present value of the future cash flows generated by the project is $163,000. Should they invest in this project?
Answer:
No, as the net present value comes in negative
Explanation:
As we know that
Net present value = Present value of cash inflows - Initial investment
where,
Present value os $163,000
And, the initial investment is $180,000
Now placing these values to the above formula
So, the net present value is
= $163,000 - $180,000
= -$17,000
Therefore the company should not accept the project as net present value is in negative that is -$17,000
A firm has net working capital of $2,715, net fixed assets of $22,407, sales of $31,350, and current liabilities of $3,908. How many dollars' worth of sales are generated from every $1 in total assets
Answer:
So, from every $1 of total assets, $1.08 worth of sales are generated.
Explanation:
To calculate how many dollars worth of sales are generated by $1 of total assets, we use the total assets turnover ratio. It is an accounting measure that measures the efficiency of the company's assets in generating sales. It calculates the dollar values of sales generated by each $1 of total assets. The formula for total assets turnover is,
Total Assets Turnover = Sales / Average Total Assets
We already know the level of sales. We need to determine the value of total assets first.
Total Assets = Fixed assets + Current Assets
As we know that net working capital = current assets - current liabilities,
So, the current assets are,
2715 = Current assets - 3908
2715 + 3908 = Current assets
Current assets = $6623
Total assets = 6623 + 22407
Total assets = $29030
Total Assets Turnover = 31350 / 29030
Total assets turnover = 1.0799 rounded off to 1.08
So, from every $1 of total assets, $1.08 worth of sales are generated.
Lilliput is a country that has closed borders and does not import or export any goods or services; hence, they do not worry about trade with other countries.
Total spending for the federal government of Lilliput for the last fiscal year was $1.06 billion. The country collected $1.05 billion in taxes during this same fiscal year. Assume government transfers were zero. Based on this information, what is Lilliput's budget balance? In the last fiscal year, Lilliput was running:______.
a. a budget surplus.
b. a balanced budget.
c. a budget deficit.
Answer: budget deficit
Explanation:
From the question, we are informed that the total spending for the federal government of Lilliput for the last fiscal year was $1.06 billion and that the country collected $1.05 billion in taxes during this same fiscal year.
Since the expenditure of $1.06 billion is more than the revenue of $1.05 billion, this show that there was a budget deficit.
