Answer:
One mole is the Avogadro's number of particles (atoms, molecules, ions or electrons) in a substance. Converting to moles is fairly easy because the conversion is always the same.
The smallest fundamental of an element is called an atom while two or more atoms join together to produce a molecule. Molecules are the fundamental of any given compound or a substance.
Yes, the method of converting molecules and atoms to moles are similar.
The method of conversion can be explained as:The moles are defined by the presence of Avogadro's number that gives the number of particles present in a substance.The method of converting molecules into moles requires the division of the molecules by [tex]6.02 \times 10^{23}[/tex]. This number which is used in dividing is called Avogadro's number.For converting atoms into moles the number of atoms is divided with the Avogadro's number [tex]6.02 \times 10^{23}[/tex].Therefore, the conversion to moles is easy and the same.
Learn more about moles and Avogadro's number here:
https://brainly.com/question/16398159
A 5.0 g sample of metal was heated to a temperature of 100.0 °C then placed into a calorimeter containing 35 mL of water at 20.0°C.
The final temperature was 26.5°C What is the specific heat capacity of the metal?
The specific heat capacity of the metal : c = 2.59 J/g °C
Further explanationGiven
5 g sample
35 ml water = 35 g
Required
The specific heat capacity of the metal
Solution
Heat can be formulated :
Q = m.c.Δt
Q in = Q out
Q absorbed = Q released
Q water = Q metal
35 g x 4.184 J/g °C x (26.5-20)= 5 x c x (100-26.5)
951.86 J = 367.5 x c
c = 2.59 J/g °C
why are cells small?
Answer:
you know what i really dont know but imagine if they were huge
Explanation:
Which equation is NOT balanced?
A. 2H2 + O2® 2H2O
B. H2 + H2 + O2® H2O + H2O
C. 2H2 + O2® H2O
D. 4H2 + 2O2® 4H2O
Answer:
C
Explanation
On the reactants side there is 4 Hydrogen atoms in total and two oxygen atoms on the left however on the right there is two hydrogen atoms and one oxygen atom. Leaving this equation unbalanced
The equation that is NOT balanced is [tex]\rm 2H_2 + O_2\rightarrow H_2O[/tex]. The correct answer is option C.
In a balanced chemical equation, the number of atoms of each element on the reactant side must be equal to the number of atoms of each element on the product side.
In equation A, there are 4 hydrogen atoms and 2 oxygen atoms on both the reactant and product sides, so it is balanced.In equation B, there are 4 hydrogen atoms and 2 oxygen atoms on both the reactant and product sides, so it is balanced.In equation C, there are 4 hydrogen atoms and 2 oxygen atoms on the reactant side, but only 2 hydrogen atoms and 1 oxygen atoms on the product side. Therefore, it is not balanced.In equation D, there are 8 hydrogen atoms and 4 oxygen atoms on both the reactant and product sides, so it is balanced.In conclusion, equation C. [tex]\rm 2H_2 + O_2\rightarrow H_2O[/tex] is the one that is NOT balanced. It has an unequal number of oxygen atoms on the reactant and product sides.
Learn more about Balanced chemical equation here:
https://brainly.com/question/29130807
#SPJ6
Radio waves are used to transmit information on various channels. What is the wavelength of a radio wave having the frequency of 5.40 × 1010 Hz?
1. Analyze the Problem
ν = and c = Unknown: λ =
You know that because radio waves are part of the electromagnetic spectrum, their speed, frequency, and wavelength are related by the formula c = λν.
Answer:
5.56×10¯³ m
Explanation:
From the question given above, the following data were obtained:
Frequency (v) = 5.4×10¹⁰ Hz
Wavelength (λ) =?
The velocity of electromagnetic wave, frequency and wavelength are related according to the equation:
Velocity (c) = wavelength (λ) × frequency (v)
c = λv
With the above formula, the wavelength of the radio wave can be obtained as follow:
Frequency (v) = 5.4×10¹⁰ Hz
Wavelength (λ) =?
Velocity (c) = 3×10⁸ m/s
c = λv
3×10⁸ = λ × 5.4×10¹⁰
Divide both side by 5.4×10¹⁰
λ = 3×10⁸ / 5.4×10¹⁰
λ = 5.56×10¯³ m
Thus, wavelength of the radio wave is 5.56×10¯³ m
what is the name and classification of a six sided molecule with oh attached
Describe two differences between transition elements and alkali metals?
Explanation:
On the periodic table, we can find a wide range of elements from alkali metals, to the alkali earth metals, transition metals and through to the noble gases.
The alkali metals are found on the first group in the periodic table and they are group of metals. Also, the transition elements are also a group of metals.
Transition elements are known to have variable oxidation states whereas, alkali metals have an oxidation state of +1. Transition metals belong the d-block on the periodic table whereas alkali metals are found in the first group on the periodic table.An adult dog has less inertia than a puppy.
True
False
Answer: True
Explanation: Hopes this helps- Lily ^_^
What volume will a gas occupy at 325 K if it occupies 5.8 L at 376 K? Assume the moles and pressure of gas are held constant
A) 2.89 L
B) 3.76 L
C) 5.01 L
D) 6.73 L
Answer:
5.01 L
Explanation:
my guy i just took the test, it was this one
What characteristic of an element’s atoms always determines the element’s identity?
Answer:
Number of protons
Explanation:
There are three sub atomic particles. These are;
- Protons
- Electrons
- Neutrons
Among these three particles, only one determines the identity of the element. This is the Protons. The number of protons which is also called the atomic number determines the identity of an element. For instance, atom with one proton is Hydrogen and n other element can have atomic number of one.
a soccer player kicked a soccer ball up the hill which statement is true
A. the player transferred energy to the ball
B. the potential energy of thr ball decreased
C. the potential energy of the ball did not change
D. the potential energy will increase as the ball rolls back down hill
Answer:
Kinetic energy is transferred from the leg to the ball
Explanation:
Before kicking the ball, you'll need to run to where the position of the ball is which implies that your leg is not at rest, immediately you kick the ball, you will be transferring the kinetic energy of your leg to the ball.
Which technique helps you become more resoureful
Answer:
There is an abundance of technology to help students become more resourceful and productive. For example, mind mapping can help kids better understand problems and devise plans by visualizing connections, outlining different sides of issues, and determining next steps.
Explanation:
tps://hosted 149....
Welcome
(2/1) Double -replacement chemical reactions (Lesson for 2/1) ☆ C
Cools Add-ons Help Accessibility Last edit was 4 minutes ago
Arial
B I VA
5 15 E
11
+
ext
Q26. Aqueous sodium oxalate (C204)2- and aqueous lead (II) nitrate react to product solid
lead (II) oxalate and aqueous sodium nitrate.
3.
I need Balanced chemical equations
Na₂C₂O₄(aq) + Pb(NO₃)₂⇒PbC₂O₄(s) + 2NaNO₃(aq)
Further explanationGiven
Word equation
Required
Balanced equation
Solution
Convert to skeleton equation
Na₂C₂O₄(aq) + Pb(NO₃)₂⇒PbC₂O₄(s) + NaNO₃(aq)
Balanced equation
Give a coefficient
Na₂C₂O₄(aq) + aPb(NO₃)₂⇒bPbC₂O₄(s) + cNaNO₃(aq)
Make an equation
C, left = 2, right =2b⇒2b=2⇒b=1
Na, left = 2, right = c⇒c=2
O, left = 4+6a, right = 4b+3c⇒4+6a=4b+3c⇒4+6a=4.1+3.2⇒6a=6⇒a=1
The equation becomes :
Na₂C₂O₄(aq) + Pb(NO₃)₂⇒PbC₂O₄(s) + 2NaNO₃(aq)
Please help me!!! 12 points :)
how is energy transfered from one piece of metal to another
Answer:
The positive and negative electrons attract leaving a shock and heat travels faster through metal than any other material such as plastic, wood, etc.
Explanation:
Answer:
The electrons in a piece of metal can leave their atoms and move about in the metal as free electrons. ... The hotter the metal, the more kinetic energy these vibrations have. This kinetic energy is transferred from hot parts of the metal to cooler parts by the free electrons.
Explanation:
Ionic bonds form between _____ which form positively charged ions and _____ which form negatively charged ions.
ionic bonds form between metals which form positively charged ions and nonmetals which form negatively charged ions.
Identify processes that change matter to a liquid state.
Processes in which matter changes between liquid and gaseous states are vaporization, evaporation, and condensation.
When the temperature or pressure of a system change, there occurs a change in the state of matter. The process that change the solid state into the liquid state is called the melting.
What is melting?The process in which the solid is changed into a liquid is defined as the melting. The temperature at which a solid change to a liquid is known as the melting point.
The other process in which a gas changes to a liquid is known as the condensation. This process is found to be the reverse of evaporation, where liquid water becomes a vapor.
Thus the two processes that change matter to a liquid state are melting and condensation.
To know more about melting, visit;
https://brainly.com/question/17141465
#SPJ2
What is a microbiome?
Answer:
A microbiome is the community of micro-organisms living together in a particular habitat.
Explanation:
What does the pH of a solution represent?
A. The pH represents the partial pressure of hydrogen gas.
B. The pH tells how quickly a reaction reaches equilibrium.
C. The pH indicates how acidic or basic a solution is.
D. The pH is an indicator of the salt content of a solution.
Answer:
The pH indicates how acidic or basic a solution is.
Explanation:
i just took the test and got it right.
pH of a solution is the measure of how acidic or basic the solution is. It is determined based on the H+ ion concentration in the solution. Hence, option C is correct.
What is pH?pH of a solution is the measure of the H+ ion concentration in a solution. It determines the acidity or basicity of the solution. Mathematically it is the negative logarithm of H+ ions concentration.
pH = - log [H+]
A pH scale can be used to determine the acidity or basicity of a solution. If the basicity is 7, then the solution is neutral. If the pH is less than 7 then the solution is acidic and a pH above 7 is basic solution.
Red- green color in pH scale represent the acidic solution where green is neutral and cyan to dark blue color is given by bases. Using a litmus paper the acidity can be checked based on these color change.
To find more on pH, refer here:
https://brainly.com/question/491373
#SPJ5
Can someone pls help me on this
Answer:The bottom 3
Explanation:
Beacuse all of these have to do with this subject hope this helps.
what’s the correct answer !!
Answer:
From my side the correct option is "A"
Explanation: Reasons for its correction are ,
1) Highly reactive: Nanoparticles are therefore extremely unstable and easily change themselves or react with active substances to reach a relatively stable state in some cases. This causes desired changes or undesired changes to nanoparticles and thus makes them exhibit a high reactivity and a poor stability.
2)Small size: Nanotechnology can provide rapid and sensitive detection of cancer-related molecules, enabling scientists to detect molecular changes even when they occur only in a small percentage of cells. Nanotechnology also has the potential to generate entirely novel and highly effective therapeutic agents.
Typically ____
can not be removed from the atom.
A)
electrons
B)
neutrons
C)
protons
D)
tachyons
I took the test it’s PROTONS
Answer:
Protons
Explanation:
Typically protons cannot be removed from the atom. Removing protons from an atom will completely change the atom as it will become another element entirely.
In an atom, protons are held by strong nuclear forces.
Within an atom, protons are the positively charged particles. Together with the neutrons, they are found in the nucleus of an atom. The number of protons within an atom is the atomic number of the atoms and it determines the nature and type of atom it is. Protons cannot be removed from an atom due to the strong binding force holding them together in place.Answer:
protons
Explanation:
Which element would most likely bond with lithium & why?
Answer:
Fluorine is most likely to bond with lithium One lithium (Li) atom can combine with one fluorine (F) atom. Together, they make the formula LiF. Fluorine has seven electrons of it's own. Lithium gives up its one electron to make both atoms happy.
Answer:
Fluorine is most likely to bond with lithium One lithium (Li) atom can combine with one fluorine (F) atom. Together, they make the formula LiF. Fluorine has seven electrons of it's own. Lithium gives up its one electron to make both atoms happy.
Complete the following sentence: In a reaction containing two reactants, if one of the reactants is in excess, the other reactant is known as the ______ reactant.
Answer:
excess reactant
Explanation:
The excess reactant is the reactant in a chemical reaction with a greater amount than necessary to react completely with the limiting reactant. It is the reactant(s) that remain after a chemical reaction has reached equilibrium.
In a reaction containing two reactants, if one of the reactants is in excess, the other reactant is known as the limiting reactant which decides the yield of the reaction.
What is limiting reactant ?In a reaction, all the reactants have to be in correct stoichiometry to complete the reaction. To achieve the mole ratio of the reactants is very much important for the completion of a reaction.
If a reactant is insufficient in amount, then the reaction will stop as soon as this reactant is consumed. Hence, this reactant determine the yield of the product. This reactant which is not in correct stoichiometry for the complete reaction is called the limiting reactant.
The reactant which is excess in quantity thus does not have a role in the yield of the reaction is called the excess reactant. Whatever, the concentration of this reactant in extra, the reaction does not proceed after the consumption of limiting reactant.
Find more on limiting reactant :
https://brainly.com/question/14225536
#SPJ2
Which type of mass movement is the most destructive?
creep
erosion
landslide
slump
Answer:
•landslide
Explanation:
Landslides are exceptionally destructive. Homes may be destroyed as hillsides collapse. Landslides can even bury entire villages. Landslides may create lakes when the rocky material dams a stream.
The type of mass movement is the most destructive landslide.
What is landslide?Several forms of mass wasting that may include a wide range of ground movements, such as shallow or deep-seated slope failures, rockfalls, mudflows, and debris flows are known as landslips or landslide.
Sometimes more than one type of movement occurs within a single landslide, and analysis of each requires detailed interpretation of landforms and geological sections.
Landslides are exceptionally destructive. Homes may be destroyed as hillsides collapse. Landslides can even bury entire villages. Landslides may create lakes when the rocky material dams a stream.
There are measures that can be taken to reduce the potential for a landslide to occur, such as steep slope reinforcement, installing structures using pile foundations and checking surface drainage. The easiest way to prevent a landslide is to avoid building in areas that are – or might become – prone to landslides.
Given options are-
creep
erosion
landslide
slump
Therefore, The type of mass movement is the most destructive landslide.
To learn more about landslide click:
https://brainly.com/question/13151615
#SPJ7
16.
As the elements in Group 17 on the Periodic Table
are considered from top to bottom, what happens
to the atomic radius and the metallic character of
each successive element?
A. The atomic radius and the metallic character
Aboth increase.
B. The atomic radius increases and the metallic
character decreases.
C. The atomic radius decreases and the metallic
character increases.
D. The atomic radius and the metallic character
both decrease.
Answer:
Explanation:
When going from top to bottom in any group of the periodic table, the atomic radius always tends to increase
what is the correct answer !
Answer:
Hi there, The correct answer is, OPT A
Explanation:
Please mark as the brainliest
I can hit a metal with a hammer without the metal shattering because of its
Malleability
Ductility
Conductivity
Lustrousness
Answer: Malleability
Explanation: cuz ... its right ... lol
How many moles of H₂O can be produced when 5.5 moles of CO₂ is produced? C₂H₄ + 3 O₂ --> 2 CO₂ + 2 H₂O
Answer:
5.5 mol H2O
Explanation:
Given over what you need and then mole ratio of coefficients in the balanced equation then cross multiply and do PEMDAS for that, and then you got your answer :) hope this helped.
Which three elements are combined in lithium sulfate ?
Answer:
jsidndnxjxixdjdbsjsjdidnsjdjdidndjd
Need help balancing equations please.
Answer:
A, 4,3,2
B, 1,1,2
C, 1,1,1,2
