Ionic bonds form between _____ which form positively charged ions and _____ which form negatively charged ions.

Answers

Answer 1

ionic bonds form between metals which form positively charged ions and nonmetals which form negatively charged ions.


Related Questions

what’s the correct answer !!

Answers

Answer:

From my side the correct option is "A"

Explanation:    Reasons for its correction are ,

1)  Highly reactive: Nanoparticles are therefore extremely unstable and easily change themselves or react with active substances to reach a relatively stable state in some cases. This causes desired changes or undesired changes to nanoparticles and thus makes them exhibit a high reactivity and a poor stability.

2)Small size:  Nanotechnology can provide rapid and sensitive detection of cancer-related molecules, enabling scientists to detect molecular changes even when they occur only in a small percentage of cells. Nanotechnology also has the potential to generate entirely novel and highly effective therapeutic agents.

Was Dalton's Atomic Theory correct or incorrect and why?

Answers

Answer:

The indivisibility of an atom was proved wrong: an atom can be further subdivided into protons, neutrons and electrons. However an atom is the smallest particle that takes part in chemical reactions. ... According to Dalton, atoms of different elements combine in simple whole number ratios to form compounds.

8. What is the molar mass of carbon dioxide, Co2(g)? How many grams of carbon
dioxide would there be for 3 moles? Explain.

Answers

Answer:

CO2 molar mass=44.01g

3 moles CO2 = 132.03g

Explanation:

CO2 molar mass = 12.01+2(16.00)=44.01g

3 moles CO2 * (44.01 g CO2)/(1 mol CO2)=132.03g

(Answer would be different depending on the number of decimals)

tps://hosted 149....
Welcome
(2/1) Double -replacement chemical reactions (Lesson for 2/1) ☆ C
Cools Add-ons Help Accessibility Last edit was 4 minutes ago
Arial
B I VA
5 15 E
11
+
ext
Q26. Aqueous sodium oxalate (C204)2- and aqueous lead (II) nitrate react to product solid
lead (II) oxalate and aqueous sodium nitrate.
3.
I need Balanced chemical equations

Answers

Na₂C₂O₄(aq) + Pb(NO₃)₂⇒PbC₂O₄(s) + 2NaNO₃(aq)

Further explanation

Given

Word equation

Required

Balanced equation

Solution

Convert to skeleton equation

Na₂C₂O₄(aq) + Pb(NO₃)₂⇒PbC₂O₄(s) + NaNO₃(aq)

Balanced equation

Give a coefficient

Na₂C₂O₄(aq) + aPb(NO₃)₂⇒bPbC₂O₄(s) + cNaNO₃(aq)

Make an equation

C, left = 2, right =2b⇒2b=2⇒b=1

Na, left = 2, right = c⇒c=2

O, left = 4+6a, right = 4b+3c⇒4+6a=4b+3c⇒4+6a=4.1+3.2⇒6a=6⇒a=1

The equation becomes :

Na₂C₂O₄(aq) + Pb(NO₃)₂⇒PbC₂O₄(s) + 2NaNO₃(aq)

_____ are bits and pieces of material that end up in a body of water.

Answers

Answer:

sediments

Explanation:

Need help balancing equations please.

Answers

Answer:

A, 4,3,2

B, 1,1,2

C, 1,1,1,2

Which of the following elements is used by your body? A) aluminum B) helium C) calcium D) all of the above

Answers

C is the correct answer ( calcium)

Complete the following sentence: In a reaction containing two reactants, if one of the reactants is in excess, the other reactant is known as the ______ reactant.

Answers

Answer:

excess reactant

Explanation:

The excess reactant is the reactant in a chemical reaction with a greater amount than necessary to react completely with the limiting reactant. It is the reactant(s) that remain after a chemical reaction has reached equilibrium.

In a reaction containing two reactants, if one of the reactants is in excess, the other reactant is known as the limiting reactant which decides the yield of the reaction.

What is limiting reactant ?

In a reaction, all the reactants have to be in correct stoichiometry to complete the reaction. To achieve the mole ratio of the reactants is very much important for the completion of a reaction.

If a reactant is insufficient in amount, then the reaction will stop as soon as this reactant is consumed. Hence, this reactant determine the yield of the product. This reactant which is not in correct stoichiometry for the complete reaction is called the limiting reactant.

The reactant which is excess in quantity thus does not have a role in the yield of the reaction is called the excess reactant. Whatever, the concentration of this reactant in extra, the reaction does not proceed after the consumption of limiting reactant.

Find more on limiting reactant :

https://brainly.com/question/14225536

#SPJ2

why is it important that the level of the sea water does not go above the level of the filter paper

Answers

Answer:

The water (the substance) that passes through the filter paper is called the filtrate. If your mixture is a solution, such as salty water, then filtering will not separate the salt from the water. Instead, by heating the soluton the solvent (water) evaporates leaving the solid (salt) behind.

Explanation:

Visible light is a part of what spectrum

Answers

Answer:

Visible Spectrum/Electromagnetic spectrum

Explanation:

The visible spectrum is the portion of the electromagnetic spectrum that is visible to the human eye.

PLeas hurry

Which of the following matches a human action with its impact?

Construction of dam : Scarcity of water for animals

Use of fertilizers : Increase in the population of aquatic animals

Decrease in honeybee population : Increase in plant population

Construction of roads : Improvement in quality of water in local lakes

Answers

construction of dam : scarcity of water for animals

Answer:

construction aka A

Explanation:

got 100

What is the charge of an electron?

Answers

There is the answer hope this helps

3 In the section describing protozoa, the author states: "Protozoa are germs that live in almost all soil, including the hot desert sand. They live in all water too. The reader can infer that protozoa can be found where? A only in oceans and on beaches B never in bodies all water and most soil mostly in warm climates​

Answers

Answer:

I believe the answer is A.

Explanation:

This section states that protozoa live in all bodies of water therefore B can not be an answer because it says protozoa dose not live in any body of water.

I hope this answers your question.

why are cells small?​

Answers

Answer:

you know what i really dont know but imagine if they were huge

Explanation:

Because if a cell grows beyond a certain limit, not enough material will be able to cross the membrane fast enough to accommodate the increased cellular volume.
They are also small so they can maximize the ratio of surface area to volume. Smaller cells have a higher ratio which allows more molecules and ions move across the cell membrane per unit of cytoplasmic volume.

basically cells are small because they need to be able to get the nutrients in and waste out quickly.

Which three elements are combined in lithium sulfate ?

Answers

Answer:

jsidndnxjxixdjdbsjsjdidnsjdjdidndjd

PLEASE HURRY
Which of the following is a subsurface event that takes place during the rock cycle?

Deposition

Erosion

Weathering

Plate tectonics

Answers

Answer:

Option D, Plate Tectonics

In the rock cycle, surface events takes place at the surface of earth. Thus,

weathering and erosion are surface events, while the subsurface events he take place in the deeper section of the earth . Examples of sub surface events are plate tectonics and mountain building or anything that takes place in the inner core of earth.

Explanation:

Answer:

Option D, Plate Tectonics

In the rock cycle, surface events takes place at the surface of earth. Thus,

weathering and erosion are surface events, while the subsurface events he take place in the deeper section of the earth . Examples of sub surface events are plate tectonics and mountain building or anything that takes place in the inner core of earth.

Explanation:

Option D, Plate Tectonics

In the rock cycle, surface events takes place at the surface of earth. Thus,

weathering and erosion are surface events, while the subsurface events he take place in the deeper section of the earth . Examples of sub surface events are plate tectonics and mountain building or anything that takes place in the inner core of earth.

what is the correct answer !

Answers

The answer for this question is A!

Answer:

Hi there, The correct answer is, OPT A

Explanation:

Please mark as the brainliest

A 2.5 L container holds a sample of hydrogen gas at 291 K and 180 kPa.

If the pressure increases to 350 kPa and the volume remains constant, what will the new temperature be?

Round your answer to one decimal place.

Answers

Answer:

The new temperature will be 565.83 K.

Explanation:

Gay Lussac's law establishes the relationship between the temperature and the pressure of a gas when the volume is constant. This law says that the pressure of the gas is directly proportional to its temperature. This means that if the temperature increases, the pressure will increase; or if the temperature decreases, the pressure will decrease.

In other words, Gay-Lussac's law states that when a gas undergoes a constant volume transformation, the ratio of the pressure exerted by the gas temperature remains constant:

[tex]\frac{P}{T} =k[/tex]

When an ideal gas goes from a state 1 to a state 2, it is true:

[tex]\frac{P1}{T1} =\frac{P2}{T2}[/tex]

In this case:

P1= 180 kPaT1= 291 KP2= 350 kPaT2= ?

Replacing:

[tex]\frac{180 kPa}{291 K} =\frac{350 kPa}{T2}[/tex]

Solving:

[tex]T2=350 kPa*\frac{291 K}{180 kPa}[/tex]

T2= 565.83 K

The new temperature will be 565.83 K.

How many moles of H₂O can be produced when 5.5 moles of CO₂ is produced? C₂H₄ + 3 O₂ --> 2 CO₂ + 2 H₂O

Answers

Answer:

5.5 mol H2O

Explanation:

Given over what you need and then mole ratio of coefficients in the balanced equation then cross multiply and do PEMDAS for that, and then you got your answer :) hope this helped.

Calculate the volume, at STP, of a 0.950 g sample of Carbon Monoxide gas, CO.

Answers

Answer:

0.76L is the pressure of CO at STP

Explanation:

To solve this question we must use combined gas law:

PV = nRT

Where P is the pressure of the gas (1atm at STP)

V is volume (Our incognite)

n are moles of the gas (0.950g * (1mol/28g) = 0.034 moles

R is gas constant (0.082atmL/molK)

T is absolute temperature (273.15K at STP)

V = nRT/P

V = 0.034mol*0.082atmL/molK*273.15K / 1atm

V = 0.76L is the pressure of CO at STP

Can anyone explain and answer?
Which physical change are both exothermic
A)condensation and evaporation
B)evaporation and melting
C)freezing and condensation
D)melting and freezing

Answers

Answer:

I would say C.)

Explanation:

Freezing and condensation are both ways that heat is let out from an object.

Radio waves are used to transmit information on various channels. What is the wavelength of a radio wave having the frequency of 5.40 × 1010 Hz?

1. Analyze the Problem

ν = and c = Unknown: λ =

You know that because radio waves are part of the electromagnetic spectrum, their speed, frequency, and wavelength are related by the formula c = λν.

Answers

Answer:

5.56×10¯³ m

Explanation:

From the question given above, the following data were obtained:

Frequency (v) = 5.4×10¹⁰ Hz

Wavelength (λ) =?

The velocity of electromagnetic wave, frequency and wavelength are related according to the equation:

Velocity (c) = wavelength (λ) × frequency (v)

c = λv

With the above formula, the wavelength of the radio wave can be obtained as follow:

Frequency (v) = 5.4×10¹⁰ Hz

Wavelength (λ) =?

Velocity (c) = 3×10⁸ m/s

c = λv

3×10⁸ = λ × 5.4×10¹⁰

Divide both side by 5.4×10¹⁰

λ = 3×10⁸ / 5.4×10¹⁰

λ = 5.56×10¯³ m

Thus, wavelength of the radio wave is 5.56×10¯³ m

As stars get older, before they collapse, they throw off dust, heavy atoms and other materials an form a new

A. Constellation
B. Star
C. Rain cloud
D. Nebula

Answers

Answer:

B or D

Explanation:

.....I'm pretty sure I earned on some kids tv show

D I’m pretty sure sorry if it’s not right

6. A father rabbit had long ears while the mother rabbit had short ears. Which of these statements
explains why one of the baby bunnies could have long ears?
a
The baby bunny inherited its copies of the gene for ear length from its father and not from
its mother. Those genes connect together to make its ears long.
b
The baby bunny inherited its copies of the gene for ear length from its father and not from
its mother. Just like its father's genes, those genes instruct for proteins that connect in
ways that make its ears long.
С
The baby bunny inherited one copy of the gene for ear length from its father and one copy
from its mother. That gene combination instructs for proteins that connect in ways that
make long ears.
d
The baby bunny inherited one copy of the gene for ear length from its father and one copy
from its mother. Those genes connect together to make its long ears.

Answers

Answer:

D if I’m correct

Explanation:

For species that reproduce asexually, all their offspring are
A. genetically identical
B. genetically different
C. almost identical
D. slightly different​

Answers

Answer:

A. genetically identical

Explanation:

Asexual reproduction produces offspring that are genetically identical to the parent because the offspring are all clones of the original parent. A single individual can produce offspring asexually and large numbers of offspring can be produced quickly

All the offspring that are produced in the process are genetically identical.

When we talk about this mode of reproduction, we talk about a mode of reproduction in which an organism reproduces without the fusion of gametes. This occurs essentially by cell division.

When this occur, there is no crossing of genetic material as such, all the offspring that are produced in the process are genetically identical.

Learn more about reproduction:https://brainly.com/question/1301963

Some items, such as rubber, float on the water, while some items, such as gold, sink in
the water. If an item floats is it more or less dense than the water?

Answers

Answer:

If an item is less dense, it floats on the water.

Explanation:

We know this since the more dense something it usually is heavier than if it was less dense. Which ways it down resulting to it sinking.

Mendeleev's proposal of periodic table was based on:

Answers

The proposal of the periodic table was based upon properties that appeared with some regularity by laying out the elements from lightest to heaviest.

[hope this is helpful!:))]

What is the name of the ionic compound with the formula:
AlF3

Answers

Answer:

potassium chloride.

A 5.0 g sample of metal was heated to a temperature of 100.0 °C then placed into a calorimeter containing 35 mL of water at 20.0°C.
The final temperature was 26.5°C What is the specific heat capacity of the metal?

Answers

The specific heat capacity of the metal : c = 2.59  J/g °C

Further explanation

Given

5 g sample

35 ml water = 35 g

Required

The specific heat capacity of the metal

Solution

Heat can be formulated :

Q = m.c.Δt

Q in = Q out

Q absorbed = Q released

Q water = Q metal

35 g x 4.184 J/g °C x (26.5-20)= 5 x c x (100-26.5)

951.86 J = 367.5 x c

c = 2.59  J/g °C

if you had a block square that weighed 5.00 grams what would be the length of each side

Answers

Answer:

[tex]l = 0.793[/tex] cm

Explanation:

Let us assume the density of block square [tex]10[/tex] g/cm³

As we know

Volume = [tex]\frac{Mass}{Density}[/tex]

Thus Volume of this block is equal to [tex]\frac{5}{10} = 0.5[/tex]

As we know volume of square block of side of length "l" is equal to [tex]l^3[/tex]

[tex]l^3 = 0.5[/tex]

[tex]l = 0.793[/tex] cm

Other Questions
EASY ALGEBRA! HELP PLEASEEE What is the square root of X with an exponent of 7? Need help in math!!!!!!!! P and q are points on the line y=2-4X Draw the line y= 2-4X for vales of x from -2 to 2 Which of these is an apt description of the Scots-Irish?Scottish highlanders uprooted from Southern IrelandScottish Presbyterians who moved to Southern IrelandIrish Catholics who were undergoing economic struggleScottish Presbyterians who moved to Northern Ireland Find the scale factor Provides an array of buttons for quick access to commonly used commands and toolsA. scroll barB. tool barC. status barD. menu bar Two important ingredients for baking bread are yeast and flour. To make a loaf of bread of at most 30 servings, maintain a yeast to flour ratio of 1:200. If you're making a loaf of more than 30 servings, use a ratio of 1:180. If you're making 30 servings of bread and using 0.45 oz of yeast, how many ounces of flour do you need? If you're making 90 servings of bread and using 720 oz of flour, how many ounces of yeast do you need? Simplify(45x6y%) = (5x4y2 how are sexual traits adaptations 3x + 16 = 136(3 seconds per item, plus 16 seconds to process payment, equals 136 seconds total.)Subtract 16 from each side. Then divide both sides by 3. Which equation represents exponential decay?O A y = 100(31)O B. y = 1 (3.1)C. y = 10(0.13)D. y = 100(1.03) How can you tell whether a function is a linear function?A. Graph it and check to see if the graph is a straight line.B. Check to see if it fits the pattern y = a + bx.C. Look at the slope and make sure it's always changing. What is the volume of the following rectangle prism? Plz help he accounts in the ledger of Monroe Entertainment Co. are listed below. All accounts have normal balances. Accounts Payable $418 Fees Earned $2,221 Accounts Receivable 765 Insurance Expense 411 Prepaid Insurance 4,395 Land 1,763 Cash 1,386 Wages Expense 735 Drawing 301 Capital 7,117 Total assets are azules / las mochilas / son/de los chicos *De los chicos son las mochilas azulesO Las mochilas azules son de los chicosO Las azules mochilas de los chicos sonLas azules mochilas son de los chicos In word order Rewrite in slope-intercept form.10x + 2y = 8Enter your answer in the form y=mx+cSimplify your answer if possible using integers or simplified fractions. Example: y=3/4x-210x+2y=8 Help im behind my math class. pls You plan to clone a guide RNA sequence into the pML104 plasmid because you want to engineer the construct in bacteria and later express it in yeast. Unfortunately, your lab does not have any available pML104. Your friend in the lab next door lets you borrow a related plasmid pML107, and you quickly start your experiment. Will it work? Briefly explain. A grid has lines at 90-degreree angles. There are 12 lines in one direction and 9 lines in the other direction. Lines that are parallel are 11 inches apart. What is the least number of 12in by 12in floor tiles needed to cover all of the line intersections of the grid? The tiles do not have too touch each other.