In a classroom, students who are biochemistry majors are learning about the overall organization of biological membranes. However, one of the students finds a WRONG explanation about the fluid mosaic model from a website and bring it up in a discussion. Which of the following is a WRONG explanation?

a. An explanation of the two-dimensional solutions of oriented lipids and globular proteins.
b. The lipid bilayer is a solvent for integral membrane proteins.
c. All membrane proteins diffuse laterally and freely in the lipid matrix.
d. None of the answers is correct.
e. The lipid bilayer is a permeability barrier for integral membrane proteins.

The question is incomplete, the complete question is shown in the image attached to this answer

Answer:

A

Explanation:

We can see from the conditions of the reaction that the incoming nucleophile is -SCH3 and there are two possible leaving groups in the substrate.

First of all, we have to look at the conditions of the reaction. We can see that the reaction is taking place in DMF, a polar aprotoc solvent. This condition favours the SN2 synchronous mechanism over the SN1 ionic mechanism.

Hence, the nucleophile at the 1-position is preferentially substituted owing to the conditions of the reaction.

Thus, option A is the major product of the reaction.

Answer:

2700 kg/m³

Explanation:

First let's convert 2.7 g/cm³ to kg/cm³, keeping in mind that 1 kilogram equals 1000 grams:

Finally we need to convert 0.0027 kg/cm³ to kg/m³, keeping in mind that 1 meter equals 100 centimeters, as follows:

The answer is 2700 kg/m³.

Answer:

A) 697 mL

Explanation:

First convert degrees Celsius to Kelvin.

That gives;

For T1; temp 1 (273 + 25.1)

= 298.1K

T2; temp 2 (273+60.7)

=333.7K

From the formula, (V1/T1) = (V2/T2)

To find V2 = (V1/T1) × T2

= (622.7/298.1) × 333.7.

= 697.06mL

~~ 697mL

Answer:

The entropy change of carbon dioxide = 0.719 kJ/k

Explanation:

Given:

1.5 m - 3 insulated rigid tank contains 2.7 kg of carbon dioxide at 100 kPa

The objective is to determine the entropy change of carbon dioxide

Formula used:

ΔS=

Solution:

On considering,

[tex]C_{P} =0.846 kJ/kg K\\C_V=0.657 kJ/kg k\\[/tex]

ΔS=[tex]mc_{v} lu\frac{p_{2} }{P_{1} }[/tex]

On substituting the values,

ΔS=[tex]2.7*0.657lu\frac{150}{100}[/tex]

ΔS=0.719 kJ/k

The entropy change is "0.719 kJ/K".

Given values are:

Mass of tank,

Pressure,

Rised pressure,

Assumption of constant specific heat is,

As we know the formula,

→ [tex]\Delta S = mC_v \ ln(\frac{P_2}{P_1} )[/tex]

         [tex]= (2.7)(0.657) \ ln (\frac{150}{100} )[/tex]

         [tex]= 1.7739\times 0.4055[/tex]

         [tex]= 0.7193 \ kJ/K[/tex]

Thus above answer is right.

Learn more:

https://brainly.com/question/20340354

Answer:

Carboxyl, primary amine, amide, ester, and phenyl.

Explanation:

The functional groups present in the compound of aspartame are carboxyl, primary amine, amide, ester, and phenyl. Aspartame is an artificial non-saccharide sweetener which is 200 times sweeter than sucrose. This aspartame is commonly used as a sugar substitute in many foods and beverages. It has the trade names such as NutraSweet, Equal, and Canderel.

Answer:

1) volumetric

2) graduated

3) volumetric

Explanation:

A volumetric glassware is a glassware that is marked at a particular point. A typical example of a volumetric glassware is the volumetric flask. A volumetric glassware is capable of measuring only a specific volume of a liquid.

On the other hand, graduated glassware can measure a range of volumes of liquid. However, a volumetric glassware is still required where a high degree of accuracy is important.

Answer: In order for a substitution reaction to take place, at a minimum, loss of a leaving group and nucleophilic attack are needed.

Explanation:

When one group in a molecule is replaced by another one then it is called a substitution reaction.

For a substitution reaction reaction to occur at a minimum, it is necessary to have a leaving group that helps in creating a carbocation and hence a nucleophile can easily attack.

For example, [tex]CH_{4} + Cl_{2} + h\nu \rightarrow CH_{3}Cl + HCl[/tex]

Thus, we can conclude that in order for a substitution reaction to take place, at a minimum, loss of a leaving group and nucleophilic attack are needed.

Answer:

2KMnO4(aq) + 16HCl(aq) ------> 2MnCl2(aq) + 2KCl(aq) + 8H2O(l) + 5Cl2(g)

Explanation:

Chlorine is a diatomic halogen gas known for its greenish-yellow colour. It has a pungent smell and is only moderately soluble in water.

It is a very reactive gas and is never found in free state in nature.

Chlorine can be prepared in the laboratory by oxidation of hydrochloric acid using KMnO4 as follows;

2KMnO4(aq) + 16HCl(aq) ------> 2MnCl2(aq) + 2KCl(aq) + 8H2O(l) + 5Cl2(g)

The set up does not need to be heated.

Answer:

Depends on molecule.

Explanation:

The number of the polypeptide chains present in the oligomer depends on the molecule. Some molecules have more polypeptide chains whereas some of them have less polypeptide chains. For example, Hemoglobin is a oligomer that consists of four Polypeptide Chains, two of these Polypeptide Chains are α-globin molecules, each comprise of 141 amino acids, and the other two are (β, γ, δ, or ε) globins, each consist of 146 amino acids.

Answer:

Mass of sodium produced = 2.74 × 10⁵ g of Na

Mass of chlorine produce = 4.24 × 10⁵ g of Cl₂

Explanation:

In the electrolysis of molten NaCl as described above, the quantity of charge used is given by the formula, Q = I × t

Where I isnthe current passed in amperes and t is time in seconds.

Q = 4.0 × 10⁴ A × (8 × 60 × 60) s = 1.152 × 10⁹ C

Equation for the discharge of sodium is; Na+ + e- ---> Na (s)

One mole of electrons is required to discharge one mole of Na

One mole of electron = 1 faraday = 96500 C

One mole of Na has a mass of 23 g

96500 C produces 23 g of Na

1.152 × 10⁹ C will produce 23 g × 1.152 × 10⁹ C / 96500 C = 2.74 × 10⁵ g of Na

Equation for the discharge of chlorine gas is; 2 Cl- ---> Cl₂(g) + 2e-

Two mole of electrons are required to discharge one mole of chlorine gas

Two moles of electron = 2 faraday = 2 × 96500 C = 193000

One mole of Cl₂ has a mass of 71 g

193000 C produces 71 g of Cl₂

1.152 × 10⁹ C will produce 71 g × 1.152 × 10⁹ C / 193000 C = 4.24 × 10⁵ g of Cl₂

The amount of Na produced is 274551 g and the amount of Cl₂ produced is 423763.5 g.

Current passed through the cell = [tex]4.0\times10^4 A[/tex]

Time = 8 Hours

We have to calculate the amount of Na and [tex]Cl_2[/tex] produced in 8 hours in the downs cell.

The Downs process is an electrochemical method for the commercial preparation of metallic sodium, in which molten NaCl is electrolyzed in a special apparatus called the Downs cell.

The total charge passed through the cell is calculated by the given formula as

Charge(Q) = Current(I) × time(t)

Q = [tex]4.0\times10^4 A \times t[/tex]

[tex]t = 8 \times 60\times 60[/tex] sec

t = 28800 sec

Q = [tex]4.0\times10^4 A \times 28800[/tex] sec

Q = [tex]115200\times 10^4 A\ sec[/tex]

We know that, Ampere = Coulombs per sec

Q = [tex]115200\times 10^4\ C[/tex]

1 mol of electrons  96500 C charge

Therefore, the number of mols of electrons carries this [tex]115200\times 10^4\ C[/tex] charge = [tex]\frac{115200\times10^4}{96500}[/tex] = 1.1937 × 10⁴ = 11937 mol electrons

In the Down's cell

Half cell reactions are:

Reduction half-reaction: [tex]2Na^+(aq)+2e^- \to 2Na(s)[/tex]

Oxidation half-reaction: [tex]2Cl^-(aq)\to Cl_2(g) + 2e^-[/tex]

We know that no. of moles = [tex]\frac{given \ mass}{molar \ mass}[/tex]

Molar mass of Na = 23 g/mol

The mass of Na formed = 11937 mol × 23 g/mol = 274551 grams

The molar mass of Cl₂ = 71 g/mol

The mass of Cl₂ = [tex]\frac{11937}{2}\times 71 = 423763.5 \ grams[/tex]

Hence, the amount of Na produced is 274551 g and the amount of Cl₂ produced is 423763.5 g.

To learn more about electrochemistry, click here:

https://brainly.com/question/13891856

Answer:

.

Explanation:

Answer:

43.0 L

Explanation:

Step 1: Given and required data

Step 2: Calculate the volume of the flask (V)

We will use the ideal gas equation.

P × V = n × R × T

V = n × R × T / P

V = 1.99 mol × (0.0821 atm.L/mol.K) × 313 K / 1.19 atm = 43.0 L

The answer is 4.30 L

Answer:

The rate law for the following reaction:

H2SiF6(aq)+2NaF(aq)+3H2O(aq)⟶Na2SiO3(s)+8HF(aq)

is second order in H2SiF6, zero order in NaF and first order in H2O.

Answer:

The uncertainty principle is one of the most famous (and probably misunderstood) ideas in physics. It tells us that there is a fuzziness in nature, a fundamental limit to what we can know about the behavior of quantum particles and, therefore, the smallest scales of nature.

Answer:

21.63 %

Explanation:

The molar mass of Mn₃[Mn(CO)₄]₃ is 665.64 g/mol.

Let's assume we have 1 mol of Mn₃[Mn(CO)₄]₃, if that were the case then we would have 665.64 grams.

There are 12 C moles per Mn₃[Mn(CO)₄]₃, with that in mind we calculate the weight of 12 C moles:

Finally we calculate the mass percent of carbon:

Answer:

B

Explanation:

Spontaneous in chemical reactions means without any external input.

Occurring without added energy. Hence, option B is correct.

A spontaneous reaction is a reaction that supports the formation of products under the conditions under which the reaction is happening.

Spontaneous Reaction- a reaction that favours the formation of products at the conditions under which the reaction is occurring.

A non-spontaneous reaction can be made spontaneous if it is inside a controlled environment, this is what happens in nuclear power plants that create atomic fusion and fission in chambers that are controlled to control different particles to create nuclear active rays.

Hence, option B is correct.

Learn more about the spontaneous reaction here:

brainly.com/question/23142328

#SPJ5

Answer:

volume = mass/density

Here, volume = 80g/1.59gcm-3 → 50.314 cm3

Explanation:

Answer:

1.6 x 10⁻²⁴ moles

Explanation:

We have 0.984 molecules of F₂. We know that 1 mol is equal to 6.022 x 10²³ molecules. Thus, we have a conversion factor: 1 mol/6.022 x 10²³ molecules

So, we multiply the molecules of F₂ by the conversion factor to calculate the moles:

0.984 molecules x  1 mol/6.022 x 10²³ molecules = 1.6 x 10⁻²⁴ moles

Answer:

SF2(aq) → S²⁺(aq) + 2F-(aq)

Explanation:

The sulfur difluoride, SF2, dissolves in water because the differences in electronegativities are considerable (3.98 for Fluorine and 2.58 for S) doing the F-S bond polar. As water is a polar solvent will dissolve the SF2 as follows:

As Fluorine has a > electronegativity than S, the Fluorine will be negative and S will be positive. Also, all halogen ions has a charge of -1.

Answer:

A fluid is a medium that has a defined mass and volume, but no fixed shape, at a constant temperature and pressure. This may include gases, liquids, plasmas, and to some extent plastic solids. A fluid can flow and deform, preventing it from carrying loads in a static equilibrium.  A fluid is always compressible and internal frictional forces always occur due to the viscosity of the fluid.

Answer:

Hindi ko po ma gets sinasabi nyu pwedeng pakiayus

Pyruvate Kinase

Pyruvate Kinase performs a substrate level phosphorylation on ADP to generate an ATP and pyruvate, the final product of glycolysis.

PK dificiency is transmitted in an autosomal recessive disorder in which both alleles must contain the mutated gene, PK-LR.

Hope it helps you! ＼(^ᴥ^)／

Answer:

The appropriate answer is "1.96 mol".

Explanation:

The given values are:

Volume,

V = 26.5 L

Pressure,

P = 1.7 atm

Temperature,

T = 280 K

Now,

The number of moles (n) will be:

= [tex]\frac{PV}{RT}[/tex]

By substituting the values, we get

= [tex]\frac{1.7\times 26.5}{0.0821\times 280}[/tex]

= [tex]\frac{45.05}{22.988}[/tex]

= [tex]1.96 \ mol[/tex]

Answer:

0.9433g

Explanation:

Theoretical yield is defined as the mass produced assuming all reactant reacts producing the product.

Assuming the reaction is 1:1, we need to find the moles of E-stilbene (Reactant). If all reactant reacts, the moles of E-stilbene = Moles of product.

Using the molar mass of the product we can find the theoretical yield as follows:

Moles E-stilbene:

0.50g * (1mol/180.25g) = 0.00277 moles = Moles Product

Mass Product = Theoretical yield:

0.00277 moles * (340.058g/mol) = 0.9433g

Answer:

I don't know what to say . just for points

Answer:

cell

chloroplast and cell wall

nucleus

life processes

cell membrane

shape and size

vacuole

Hope it helps

Answer:

See detailed explanation.

Explanation:

Hello there!

In this case, according to the given description, it turns out possible for us to infer that the second fractionating column on top of the first one will favor the light product, in this case hexane as it has the lowest boiling point and molar mass; in such a way, we can tell the following:

a) The separation between hexane and heptane will be increased as a purer hexane-rich product will be obtained on the top of the second column.

b) Will be increased as well, because the second column will remove more heptane.

c) Also, more pure heptane will be obtained on the bottom of the two columns, yet the most favored yield will be that of hexane.

All of the aforementioned is possible due to the fact that the second column will remove the amount of heptane that could not be removed on the top of the first column by taking the vapor-liquid equilibrium further from the first column's maximum separation, which is known as distillation sequences.

Regards!

Answer:

5.0molO

Explanation:

To find the moles of oxygen in 2.5 moles of caffeine, we will first research caffeine's molecular formula: C8H10N4O2. From the molecular formula, we can see there are 2 oxygen atoms in every 1 molecule of C8H10N4O2.We can therefore multiply by the following mole ratio to get the moles of oxygen.

2.5molC8H10N4O2×2molO/1molC8H10N4O2 = 5.0molO.

Answer:

I don't understand the question

Explanation:

1. c

2. c

Answer:

1. b. A = B

2. c. A < B

Explanation:

Consider equimolar samples of different ideal gases at the same volume and temperature. (nA = nB)

Gas A has a higher molar mass than gas B. (MA > MB)

1. We can calculate the pressure using the ideal gas equation.

P = n × R × T / V

Since n, T and V are equal, the pressure of both gases are equal as well.

2. We can calculate the root-mean-square of the velocity using the following expression.

v(rms) = √(3RT/M)

There is an inverse relationship between speed and molar mass. Since A has a higher molar mass, it has a lower speed.