Answer:
the mass does not change
Explanation:
1500 L has how many significants figures
Answer:
It has 2
Explanation:
The significant figures are 1 and 5!
Hope this helps:)
What is the pH of 10.0 mL solution of 0.75 M acetate after adding 5.0 mL of 0.10 M HCl (assume a Ka of acetic acid of 1.78x10-5)
Answer:
5.90
Explanation:
Initial moles of CH3COO- = 10.0/1000 x 0.75 = 0.0075 mol
Moles of HCl added = 5.0/1000 x 0.10 = 0.0005 mol
CH3COO- + HCl => CH3COOH + Cl-
Moles of CH3COO- left = 0.0075 - 0.0005 = 0.007 mol
Moles of CH3COOH formed = moles of HCl added = 0.0005 mol
pH = pKa + log([CH3COO-]/[CH3COOH])
= -log Ka + log(moles of CH3COO-/moles of CH3COOH)
= -log(1.78 x 10^(-5)) + log(0.007/0.0005)
= 5.90
Answer:
The correct answer is 5.895.
Explanation:
The reaction will be,
CHCOO⁻ + H+ ⇔ CH₃COOH
Both the HCl and the acetate are having one n factor.
The millimoles of CH₃COO⁻ is,
= Volume in ml × molarity = 10 × 0.75 = 7.5
The millimoles of HCl = Volume in ml × molarity = 5 × 0.1 = 0.5
Therefore, 0.5 will be the millimoles of CH₃COOH formed, now the millimoles of the CH₃COO⁻ left will be, 7.5-0.5 = 7.0
The volume of the solution is, 10+5 = 15 ml
The molarity of CH₃COO⁻ is, millimoles / volume in ml = 7/15
The molarity of CH₃COOH is 0.5/15
pH = pKa + log[CH₃COO⁻]/[CH₃COOH]
= 4.74957 + 1.146
= 5.895
An atom of 108Te has a mass of 107.929550 amu. Calculate the binding energy per MOLE in kJ. Use the values: mass of 1H atom
Answer:
The binding energy = 8.64972649×10¹⁰ kJ/mole
Explanation:
Given that:
An atom of 108Te has a mass of 107.929550 amu.
In a 108 Te atom, there are 52 protons and 56 neutrons
where;
mass of proton= 1.007825 amu
mass of neutron= 1.008665 amu
Similarly; The atomic number of Te = 52
the mass of 52 protons = 52 × 1.007825 amu
the mass of 52 protons = 52.4069 amu
the mass of 56 neutrons = 56 × 1.008665 amu
the mass of 56 neutrons = 56.48524 amu
The total mass can now be = the mass of 52 protons + the mass of 56 neutrons
The total mass = 52.4069 amu + 56.48524 amu
The total mass = 108.89214 amu
Recall : it is given that An atom of 108Te has a mass of 107.929550 amu.
Therefore, the mass defect will be = 108.89214 amu - 107.929550 amu
the mass defect = 0.96259amu
where 1 amu = 1.66× 10⁻²⁷ kg
Therefore, 0.96259amu = (0.96259 × 1.66× 10⁻²⁷) kg
= 1.5978994 × 10⁻²⁷kg
The binding energy = mass defect × (speed of light)²
where;
speed of light c = 2.99792 × 10⁸ m/s
The binding energy = 1.5978994 × 10⁻²⁷kg × 2.99792 × 10⁸ m/s
The binding energy = 1.43611597 × 10⁻¹⁰ J
The binding energy = 1.43611597 × 10⁻¹³ kJ/atom
since 1 mole = 6.023 × 10²³ atom (avogadro's constant)
Then;
The binding energy = ( 1.43611597 × 10⁻¹³ )× (6.023 × 10²³) kJ/mole
The binding energy = 8.64972649×10¹⁰ kJ/mole
I need to name an ionic compound containing a transition metal cation and a halogen anion. Below are the rules I should follow to write the correct name for such compound, but one of the options is incorrect: identify and select it.
a. Identify the metal and write its name first
b. Use the periodic table to work out the charge (oxidation number) on the transition metal according to the group in the periodic table
c. From the charge of the anion work out the charge of cation as Roman number in parenthesis: specify this charge in the name as a Roman number in parenthesis.
d. Write the number of the anion after the name of the metal
Answer:
b. Use the periodic table to work out the charge (oxidation number) on the transition metal according to the group in the periodic table
Explanation:
The keyword in this problem us "transition metal". Transition metals are found between the group 2 and group 3 elements. They have the d sub shells and also exhibit variable oxidation numbers (valency).
Among the options, the incorrect option is option B.
This is because transition metals d not have a fixed oxidation number and they cannot be obtained by looking up the group in the periodic table.
The iconic compounds obtain a transition of metal caution and a halon anon. As per the rules the correct name of the compounds should be written as to identify the incorrect one.
Option B use the ability to check and to work out the charges (oxidation number) of the transition metal as per the group given in the table. The problem with the keyword is transition metal.Learn more about the ionic compound containing a transition metal.
brainly.com/question/21578354.
For each bond, show the direction of polarity by selecting the correct partial charges. _________ Si-P _________ _________ Si-Cl _________ _________ Cl-P _________ The most polar bond is _______
Answer:
Siδ⁺ -- Pδ⁻⁻
Clδ⁻⁻ -- Pδ⁺
Siδ⁺ -- Clδ⁻⁻
Of the mentioned bonds the most polar bond is Si -- Cl
The polarity of the bond primarily relies upon the electronegativity difference between the two atoms that forms the bond. Therefore, if the electronegativity difference between the two atoms that forms the bond is more the bond will be more polar, and if it is less then the bond will be less polar. The electronegativity of the atoms mentioned is Si = 1.8 , P = 2.1 and Cl = 3.00.
Therefore, the Si - Cl atoms exhibit more electronegativity difference, thus, the Si - Cl bond will be the most polar bond.
How do covalent bonds form? A Sharing valence electrons between atoms. B Donating and receiving valence electrons between atoms. C Opposite slight charges attract each other between compounds. D Scientists are still not sure how they form.
Answer:
A. Sharing valence electrons between atoms.
Explanation:
This is the definition of a covalent bond. Option B describes ionic bonds, Option C describes intermolecular forces, and Option D is wrong because then there wouldn't be any mention of them in our high school chemistry textbooks :).
Chemistry
What is a chemical reaction
Answer:
A process that involves rearrangement
Explanation:
A chemical reaction is the process that involves rearrangement of the molecular or ironic structure of a substance, as a distinct from a change in physical form or a nuclear reaction.
Answer:
Explanation:
Chemistry
The chemical reaction H2(g) + ½ O2(g) → H2O(l) describes the formation of water from its elements.
The reaction between iron and sulfur to form iron(II) sulfide is another chemical reaction, represented by the chemical equation:
8 Fe + S8 → 8 FeS
What attractive force holds two hydrogen atoms and one oxygen atom
together to make the substance water?
A. Molecules
B. Chemical bonding
O C. Valence electrons
O D. Cations
Answer:
It is a hydrogen bond but if I had to coose one of thee answers it is b. chemical bonding
Explanation:
What is the formula of a compound if a sample of the compound contains 0.492 mol X, 0.197 mol Y, and 0.295 mol Z?
Answer:
X₅Y₂Z₃
Explanation:
The formula of a compound is determined as the whole number ratio between moles of each element present in the molecule.
The molecule is made from X, Y and Z. To fin the ratio we will divide the given moles in the moles of Y (0.197 moles), because is the element with the low number of moles.
X = 0.492 moles / 0.197 moles = 2.5
Y = 0.197 moles / 0.197 moles = 1
Z = 0.295 moles / 0.197 moles = 1.5
But, as the formula is given just with whole numbers, if we multiply each number twice:
X = 2.5*2 = 5
Y = 1*2 = 2
Z = 1.5*2 = 3
The formula is:
X₅Y₂Z₃Comparing the 2-bromobutane + methoxide and 2-bromobutane + t-butoxide reactions, choose the statements that BEST describe the data and mechanism. a. the mechanism for this reaction is E2 b. an increase in 1-butene was observed when t-butoxide was used c. an increase in 1-butene was observed when methoxide was used d. the mechanism for this reaction is E1 e. no significant difference was observed
Answer:
an increase in 1-butene was observed when t-butoxide was used
Explanation:
When a base reacts with an alkyl halide, an elimination product is formed. This reaction is an E2 reaction.
Here we are to compare the reaction of two different bases with one substrate; 2-bromobutane. Both reactions occur by the E2 mechanism but follow different transition states due to the size of the base.
The Saytzeff product, 2-butene, is obtained when the methoxide is used while the non Saytzeff product, 1-butene, is obtained when t-butoxide is used.
The Saytzeff rule is reliable in predicting the major products of simple elimination reactions of alkyl halides given the fact that a small/strong bases is used for the elimination reaction. Therefore hydroxide, methoxide and ethoxide bases give similar results for the same alkyl halide substrate. Bulky bases such as tert-butoxide tend to yield a higher percentage of the non Saytzeff product and this is usually attributed to steric hindrance.
The new hybrid car can get 51.5 km/gal. It has a top speed of 40000.00 cm/min and is 4m long. How fast can the car go in m/hr?
Answer:
The anawer of this question is 0.024 m/h
Explanation:
Other explanations of the question are additional.
The rate constant for the decay of a radioactive element is 3.68 × 10⁻³ day⁻¹. What is the half-life of this element?
Answer:
half life=0.693/rate constant =188.3
The half-life of this element is 188.32 years
The formula for calculating the half-life of an element is expressed according to the equation:
[tex]t_{1/2}=\frac{ln 2}{\lambda}[/tex]
[tex]\lambda[/tex] is the decay constantt1/2 is the half-lifeGiven the following parameters:
The rate constant for the decay = 3.68 × 10⁻³ day⁻¹.
Substitute into the formula for calculating the half-life as shown:
[tex]3.68\times 10^{-3}=\frac{0.693}{\lambda}\\ 0.00368=\frac{0.693}{\lambda}\\\lambda=\frac{0.693}{0.00368}\\\lambda = 188.32 years[/tex]
Hence the half-life of this element is 188.32 years
Learn more on half-life here: https://brainly.com/question/23438944
A certain reaction has an activation energy of 39.5 kJ/mol. As the temperature is increased from 25.0°C to a higher temperature, the rate constant increases by a factor of 5.90. Calculate the higher temperature (in °C).
Answer:
Explanation:
We shall apply Arrhenius equation which is given below .
[tex]ln\frac{k_2}{k_1} = \frac{E_a}{R} [\frac{1}{T_1} -\frac{1}{T_2} ][/tex]
K₂ and K₁ are rate constant at temperature T₂ and T₁ , Ea is activation energy .
Putting the given values
[tex]ln\frac{5.9}{1} = \frac{39500}{8.3} [\frac{1}{298} -\frac{1}{T_2} ][/tex]
[tex].000373= [\frac{1}{298} -\frac{1}{T_2} ][/tex]
T₂ = 335.27 K
= 62.27 °C
The higher temperature is 62.27°C.
Calculating the higher temperature:Given that the activation energy of the reaction is:
Eₐ = 39.5 kJ/mol
initial temperature T₁ = 25°C = 298K
Let the final temperature be T₂
The rate constant at temperature T₁ be K₁, and at a temperature T₂ be K₂.
According to the question: K₂/K₁ = 5.9
Now, applying the Arrhenius equation we get:
[tex]\ln\frac{K_2}{K1}=\frac{E_a}{R}[\frac{1}{T_1} -\frac{1}{T_2}]\\\\\ln(5.9)= \frac{39.5}{8.3}[\frac{1}{298} -\frac{1}{T_2}]\\\\0.000373=\frac{1}{298} -\frac{1}{T_2}[/tex]
T₂ = 335.27K
T₂ = 335.27 -273
T₂ = 62.27°C
Learn more about rate constant:
https://brainly.com/question/24658842?referrer=searchResults
Consider the bond dissociation energies listed below in kcal/mol. CH3-Br 70 CH3CH2-Br 68 (CH3)2CH-Br 68 (CH3)3C-Br 65 These data show that the carbon-bromine bond is weakest when bromine is bound to a __________.
Answer:
The answer is "Tertiary carbon".
Explanation:
Accent to the results, the carbon-bromine bond is weak, whenever, the bromine is connected to tertiary carbon so, bonding energy is separation for methyl-carbon, which is connected to the bromine = 70 kcal/mol and for the primary energy to the secondary energy is= 68 kcal/mol, and for tertiary CO2 = 65 kcal/mol.
The stronger the energy dissociating connection and the weaker, its power dissociation connection and its weaker bond becomes connecting with a tertiary carbon, that's why "Tertiary carbon" is the correct answer.
A rock has a mass of 15.8 g and causes the water level in a graduated cylinder to raise from 22.3 mL to 32.5 mL. What is the density of the rock in Kg/mL?
Answer:
Explanation:
mass - 15.8 g = 0.0158 kg
volume = 32.5 - 22.5 = 10.2 ml
density = mass / volume
= 0.0158 / 10.2
= 0.00154 kg/ml
hope this helps
plz mark as brainliest!!!!!!!
15. How many moles of carbon tetrachloride (CCI) is represented by 543.2 g of carbon tetrachloride? The atomic weight of carbon is 12.01
and the atomic weight of chlorine is 35.45.
O A. 11.4 moles
O B.3.53 moles
C. 5.42 moles
D. 8.35x10 moles
Answer:
well, first off. the formula for carbon tetrachloride is CCl4
We need to find the molar mass of carbon tetrachloride
1(Mass of C) + 4(mass of chlorine)
1(12) + 4(35.5)
12 + 142
154 g/mol
Number of moles of CCl3 in 543.2g CCl3
n = given mass / molar mass
n = 543.2/153
n = 3.53 moles
always remember to brainly the questions you find helpful
Answer:
3.53 moles
Explanation:
At a given temperature the vapor pressures of benzene and toluene are 183 mm Hg and 59.2 mm Hg, respectively. Calculate the total vapor pressure over a solution of benzene and toluene with X Benzene
CHECK COMPLETE QUESTION BELOW
At a given temperature the vapor pressures of benzene and toluene are 183 mm Hg and 59.2 mm Hg, respectively. Calculate the total vapor pressure over a solution of benzene and toluene with Xbenzene = 0.580.
Answer:
The total vapor pressure is [tex]81.3 mmHg[/tex]
Explanation:
We will be making use of Dalton and Raoults equation in order to calculate the total pressure,
Which is [tex]PT= (PA × XA) +(PB ×XB)[/tex]
PT= total vapor pressure
From the question
Benene's Mole fraction = 0.580
then to get Mole fraction of toluene we will substract the one of benzene from 1. because total mole fraction is always 1.
= (1 - 0.580) = 0.420
Vapor pressure of benzene given = 183 mmHg
Vapor pressure of toluene given= 59.2 mmHg
If we substitute those value into above equation, we have
PT=(183×0.580)+(59.2×0.420)
=81.3mmHg
Therefore,, the total vapor pressure of the solution is 81.3 mmHg
What is the electron configuration for the transition metal ion in each of the following compounds?
[Ni(H2O)6]Br2
[Cr(H2O)4(NO2)2]I
Answer:
1)Ni=1s2, 2s2, 2p6, 3s2, 3p6, 4s0, 3d10 called full-filled
2)Cr=1s2, 2s2, 2p6, 3s2, 3p6, 4s1, 3d5 called half-filled
Account for the change when NO2Cl is added using the reaction quotient Qc. Match the words in the left column to the appropriate blanks in the sentences on the right.
1. decreases
2. loss
3. Increases
4. greater
A. Disturbing the equilibrium by adding NO2Cl______Qc to a value_____than Kc.
B. To reach a new state of equilibrium, Qc therefore______which means that the denominator of the expression for Qc______.
C. To accomplish this, the concentration of reagents______, and the concentration of products_______.
Answer:
A. Disturbing the equilibrium by adding NO2Cl decreases Qc to a value less than Kc.
B. To reach a new state of equilibrium, Qc therefore increases which means that the denominator of the expression for Qc decreases.
C. To accomplish this, the concentration of reagents decreases, and the concentration of products increases.
Explanation:
Hello,
In this case, for the equilibrium reaction:
[tex]NO_2Cl(g)+NO(g)\rightleftharpoons NOCl(g)+NO_2(g)[/tex]
Whose equilibrium expression is:
[tex]Kc=\frac{[NO_2][NOCl]}{[NO_2Cl][NO]}[/tex]
The proper matching is:
A. Disturbing the equilibrium by adding NO2Cl decreases Qc to a value less than Kc, since the denominator becomes greater, therefore, Qc decreases.
B. To reach a new state of equilibrium, Qc therefore increases which means that the denominator of the expression for Qc decreases, since the lower the denominator, the higher Qc as it has the concentration of reactants.
C. To accomplish this, the concentration of reagents decreases, and the concentration of products increases, since the reactants must be consumed in order to reestablish equilibrium by shifting the reaction towards the products.
Best regards.
In the experiment, you heated a sample of metal in a water bath and quickly removed and dried the sample prior to inserting it into the cold water "system". Why did you need to dry the sample prior to placing it into the cold water "system"
a. The extra water might react with the metal which would ruin the sample.
b. Any residual hot water would have added to the heat transferred from the metal to the cold water "system".
c. The wet metal would not transfer any heat thus causing inaccuracy in you measurements.
d. The metal would oxidize in the presence of water thus ruining the sample
Answer:
b
Explanation:
Provided the experiment is about the transfer of heat from one medium to another, any residual hot water on the metal would have added to the heat transferred from the metal to the cold water system.
The residual hot water on the metal posses its own heat and when such is transferred along with the metal into the cold water, the heat from the residual hot water will interfere with the measurement of the actual heat transferred to the cold water by the metal. Hence, the accuracy of the result would be impacted.
The correct option is b.
Use the standard half-cell potentials listed below to calculate the standard cell potential for the following reaction occurring in an electrochemical cell at 25°C. (The equation is balanced.) 3 Cl2(g) + 2 Fe(s) → 6 Cl-(aq) + 2 Fe3+(aq) Cl2(g) + 2 e- → 2 Cl-(aq) E° = +1.36 V Fe3+(aq) + 3 e- → Fe(s) E° = -0.04 V
The cell potential for the electrochemical cell has been 1.40 V.
The standard reaction for the cell will be:
[tex]\rm 3\;Cl_2\;+\;2\;Fe\;\rightarrow\;6\;Cl^-\;+\;2\;Fe^3^+[/tex]
The half-reaction of the cells has been:
[tex]\rm Fe^3^+\;+\;3\;e^-\;\rightarrow\;Fe[/tex]
The potential for this reduction has been -0.04 V.
[tex]\rm Cl_2\;+\;2\;e^-\;\rightarrow\;2\;Cl^-[/tex]
The potential for the reduction has been 1.36 V.
The cell potential has been: Potential of reduction - Potential of oxidation
Cell potential = 1.36 - (-0.04) V
Cell potential = 1.40 V.
The cell potential for the electrochemical cell has been 1.40 V.
For more information about the electrochemical cell, refer to the link:
https://brainly.com/question/22550969
Which of the following is the balanced reaction, given the rate relationships below.
a. rate = − 13 Δ[CH4] Δt = − 12 Δ[H2O] Δt = − Δ[CO2] Δt = 14 Δ[CH3OH] Δt
b. rate = − 12 Δ[N2O5] Δt = 12 Δ[N2] Δt = 15 Δ[O2] Δt
c. rate = − 12 Δ[H2] Δt = − 12 Δ[CO2] Δt = − Δ[O2] Δt = 12 Δ[H2CO3] Δt
Answer:
a. [tex]3CH_4+2H_2O+CO_2\rightarrow 4CH_3OH[/tex]
b. [tex]2N_2O_5\rightarrow 2N_2 + 5O_2[/tex]
c. [tex]2H_2+2CO_2+O_2\rightarrow 2H_2CO_3[/tex]
Explanation:
Hello,
In this case, since those rate relationships have the stoichiometric coefficient at the denominators of the fractions preceding each ratio and the negative terms account for reactants and positive for products, we have:
a. [tex]3CH_4+2H_2O+CO_2\rightarrow 4CH_3OH[/tex]
b. [tex]2N_2O_5\rightarrow 2N_2 + 5O_2[/tex]
c. [tex]2H_2+2CO_2+O_2\rightarrow 2H_2CO_3[/tex]
Best regards.
What's the concentration of hydronium ions if a water-base solution has a temperature of 25°C (Kw = 1.0×10–14), with a concentration of hydroxide ions of 2.21×10–6 M? answer options: A) 2.8×10–8 M B) 4.52 ×10–9 M C) 1.6×10–9 M D) 3.1×10–6 M
Answer:
ITS NOT D. ITS B. 4.52x10^-9 M
Explanation:
Answer:
4.52 ×10–9 M
Explanation:
Gas is contained in a 9.00-L vessel at a temperature of 24.0°C and a pressure of 5.00 atm. (a) Determine the number of moles of gas in the vessel. mol (b) How many molecules are in the vessel? molecules
Answer:
a. Moles in the vessel = 1.85 moles of the gas
b. 1.11x10²⁴ molecules are in the vessel
Explanation:
a.It is possible to determine moles of a gas using the general law of gases:
PV = nRT
Where P is pressure: 5.00atm; V is volume = 9.00L; R is gas constant: 0.082atmL/molK; T is absolute temperature: 273.15K +24.0 = 297.15K
Computing the values:
PV / RT = n
5.00atm* 9.00L / 0.082atmL/molK*297.15K = n
Moles in the vessel = 1.85 moles of the gasb. With Avogadro's number we can convert moles of any compound to molecules thus:
Avogadro's number = 6.022x10²³ molecules / mole
1.85moles ₓ (6.022x10²³ molecules / mole) =
1.11x10²⁴ molecules are in the vesselHow many kg/hr of steam are produced by a 50HP boiler?
Answer:
Explanation:
50 HP = 50 x 746 watt
= 37300 watt
= 37300 J /s
heat produced in one hour = 60 x 60 x 37300 J
= 134280 x 10³ J
latent heat of vaporization = 2260 x 10³ J / kg .
for evaporation of water of mass 1 kg , 2260 x 10³ J of heat is required .
kg of water being evaporated by boiler per hour
= 134280 x 10³ / 2260 x 10³
= 59.41 kg
rate of production of steam
= 59.41 kg / hr .
Determine the oxidation state for each of the elements below. The oxidation state of ... silver ... in ... silver oxide Ag2O ... is ... ___ . The oxidation state of sulfur in sulfur dioxide SO2 is ___ . The oxidation state of iron in iron(
Answer:
The oxidation state of silver in [tex]\rm Ag_2O[/tex] is [tex]+1[/tex].
The oxidation state of sulfur in [tex]\rm SO_2[/tex] is [tex]+4[/tex].
Explanation:
The oxidation states of atoms in a compound should add up to zero.
Ag₂OThere are two silver [tex]\rm Ag[/tex] atoms and one oxygen [tex]\rm O[/tex] atom in one formula unit of [tex]\rm Ag_2O[/tex]. Therefore:
[tex]\begin{aligned}&\rm 2 \times \text{Oxidation state of $\rm Ag$}+ \rm 1 \times \text{Oxidation state of $\rm O$} = 0\end{aligned}[/tex].
The oxidation state of oxygen in most compounds (with the exception of peroxides and fluorides) is [tex]-2[/tex]. Silver oxide [tex]\rm Ag_2O[/tex] isn't an exception. Therefore:
[tex]\begin{aligned}&\rm 2 \times \text{Oxidation state of $\rm Ag$}+ \rm 1 \times \text{Oxidation state of $\rm O$} = 0\\ &\rm 2 \times \text{Oxidation state of $\rm Ag$}+ \rm 1 \times (-2) = 0\end{aligned}[/tex].
Solve this equation for the (average) oxidation state of [tex]\rm Ag[/tex]:
[tex]\text{Oxidation state of $\rm Ag$} = 1[/tex].
SO₂Similarly, because there are one sulfur [tex]\rm S[/tex] atom and two oxygen [tex]\rm O[/tex] atoms in each [tex]\rm SO_2[/tex] molecules:
[tex]\begin{aligned}&\rm 1\times \text{Oxidation state of $\rm S$}+ \rm 2 \times \text{Oxidation state of $\rm O$} = 0\end{aligned}[/tex].
The oxidation state of [tex]\rm O[/tex] in [tex]\rm SO_2[/tex] is also [tex]-2[/tex], not an exception, either.
Therefore:
[tex]\begin{aligned}&\rm 1 \times \text{Oxidation state of $\rm S$}+ \rm 2 \times \text{Oxidation state of $\rm O$} = 0\\ &\rm 1 \times \text{Oxidation state of $\rm S$}+ \rm 2 \times (-2) = 0\end{aligned}[/tex].
Solve this equation for the oxidation state of [tex]\rm S[/tex] here:
[tex]\text{Oxidation state of $\rm S$} = 4[/tex].
A student mixed 50 ml of 1.0 M HCl and 50 ml of 1.0 M NaOH in a coffee cup calorimeter and calculate the molar enthalpy change of the acid-base neutralization reaction to be –54 kJ/mol. He next tried the same experiment with 100 ml of 1.0 M HCl and 100 ml of 1.0 M NaOH. The calculated molar enthalpy change of reaction for his second trial was:
Answer: The calculated molar enthalpy change of reaction for his second trial was -108 kJ.
Explanation:-
Molarity of a solution is defined as the number of moles of solute dissolved per Liter of the solution.
[tex]\text{no of moles}={\text{Molarity}\times {\text{Volume in L}}[/tex]
Thus [tex]\text{no of moles}of HCl={1.0M}\times {0.05L}=0.05moles[/tex]
Thus [tex]\text{no of moles}of NaOH={1.0M}\times {0.05L}=0.05moles[/tex]
[tex]HCl(aq)+NaOH(aq)\rightarrow NaCl(aq)+H_2O(l)[/tex]
Given for second trial:
[tex]\text{no of moles}of HCl={1.0M}\times {0.1L}=0.1moles[/tex]
[tex]\text{no of moles}of NaOH={1.0M}\times {0.1L}=0.1moles[/tex]
0.05 moles of [tex]HCl[/tex] reacts with 0.05 moles of [tex]NaOH[/tex] to release heat = 54 kJ
0.1 moles of [tex]HCl[/tex] reacts with 0.05 moles of [tex]NaOH[/tex] to release heat =[tex]\frac{54}{0.05}\times 0.1=108kJ[/tex]
Thus calculated molar enthalpy change of reaction for his second trial was -108 kJ.
What is the density of a 10 kg mass that occupies 5 liters?
( pls need help)
Answer: d=2000 g/L
Explanation:
Density is mass/volume. The units are g/L. Since we are given mass and volume, we can divide them to find density. First, we need to convert kg to g.
[tex]10kg*\frac{1000g}{1kg} =10000 g[/tex]
Now that we have grams, we can divide to get density.
[tex]d=\frac{10000g}{5 L}[/tex]
d=2000g/L
If a substance has a half-life of 55.6 s, and if 230.0 g of the substance are present initially, how many grams will remain after 10.0 minutes?
Answer:
[tex]m=0.127g[/tex]
Explanation:
Hello,
In this case, for a first-order reaction, we can firstly compute the rate constant from the given half-life:
[tex]k=\frac{ln(2)}{t_{1/2}} =\frac{ln(2)}{55.6s}=0.0125s^{-1}[/tex]
In such a way, the integrated first-order law, allows us to compute the final mass of the substance once 10.0 minutes (600 seconds) have passed:
[tex]m=m_0*exp(-kt)=230.0g*exp(-0.0125s^{-1}*600s)\\\\m=0.127g[/tex]
Best regards.
which of the following is an example of precipitate a. liquid evaporating into gas b. a solid form from a frozen liquid c. a chunky solid form from 2 liquids combining d. a liquid solution that contains 2 substances
Answer:
B and C
Explanation:
The google definition of precipitate is "a solid formed by a change in a solution, often due to a chemical reaction or change in temperature that decreases solubility of a solid". So in this case, the "solid formed from a frozen liquid" and "a chunky solid form from 2 liquids combining" are both examples of a precipitate.
The correct answer is C, a chunky solid form from 2 liquids combining.
In the laboratory, we usually mix two chemicals. When we mix the chemicals, we expect them to interact in one way or another. The interaction of those chemicals is known as a chemical reaction.
When we mix two liquid chemicals and they interact with each other to yield a solid product, we say that a chemical reaction has occurred and that such chemical reaction has produced a precipitate.
https://brainly.com/question/24276721
