Answer:
If your brakes go out, you want to do three things.
Explanation:
First, downshift to a lower gear. Second, if you have regular brakes pump the brake pedal fast and hard to build up brake fluid pressure. Gradually apply the parking brake and be prepared for the car to skid. hope this helps you :)
HELPPPP. How many engineers are there in u.s?
There were about 1.6 million engineers employed in the United States in May 2015. Mechanical, civil, and industrial engineers together made up half of all employed engineers.
Answer:
There were about 1.6 million engineers employed in the United States in May 2015. Mechanical, civil, and industrial engineers together made up half of all employed engineers. The three smallest engineering occupations—agricultural engineers, marine engineers and naval architects, and mining and geological engineers—together made up about 1 percent of total engineer employment......
If sail boats A and B are approaching each other with the wind on different sides, why is vessel A considered the give-way vessel (vessel that must take early and substantial action to avoid a collision)?
Answer:
The reason is because when the wind approaches each sailboat from a different side, the sailboat that the wind approaches from the port side, which is the left side is the give-way vessel.
Whereby the wind approaches the vessel A from the port (left) side then vessel A is considered the give-way vessel
The give-way vessel is the vessel that will have to take expeditious steps to create access for the other vessels by either changing course, stopping, or moving with reduced speed
Explanation:
what kind of line is used to indicate the supporting beam
Answer:horizontal
Explanation: because it is supporting it
Steam enters an adiabatic turbine at 8 MPa and 500 C with a mass flow rate of 3 kg/s andleaves at 30 kPa.The isentropic efficiency of the turbine is 0.90. Neglecting the kinetic energy change of the steam, determine (a) the tem-perature at the turbine exit and (b) the power output of theturbine
Answer:
(a) The exit temperature = 69.1°C
(b) The power output = 8.3 MW
Explanation:
(a) The enthalpy of steam at 8 MPa and 500°C is given (from online sources) as h₁ = 3399 kJ/kg
The exit temperature = The saturation temperature at 30 kPa = T₄ = 69.096 + 273.15 = 342.246 K
The exit temperature = 69.1°C
(b) The mass flow rate = 3 kg/s
The isentropic efficiency = 0.9 = (h₁ - h₂)/(h₁ - h₂[tex]_s[/tex])
s₁ = 6.727 kJ/kgK
h₂[tex]_s[/tex] = 289.229+ 2335.32* (6.8235 - 6.727 )/6.8235 = 322.26 kJ/kg
Therefore, h₂ = h₁ - (h₁ - h₂[tex]_s[/tex])*0.9
h₂ = 3399 - (3399 - 322.26 )*0.9 = 629.934 kJ/kg
The power output = [tex]\dot m[/tex](h₁ - h₂) = 3 *(3399 - 629.934) = 8307.2 kJ/s =
8.3 MW.
You are driving a vehicle that has an automatic transmission. When you park on a hill, you
should
A: Set the parking brake first, before you shift the transmission into Park.
B: Shift the transmission into Park, and leave the parking brake off.
C: Set the parking brake, and shift the transmission into Neutral.
Answer:
The answer is A. Set the parking brake first, before you shift the transmission into Park.
An automatic gearbox is a multi-speed transmission system. The correct option is A.
What is the automatic transmission?An automatic gearbox is a multi-speed transmission system that is used in internal combustion engine-powered motor vehicles that do not require any driver input to change forward gears. Thus, making the process of shifting gears automated.
The correct way to park an automatic transmission vehicle is to set the parking brake first before you shift the transmission into Park. Therefore, the correct option is A.
Learn more about Automatic Transmission:
https://brainly.com/question/14093047
#SPJ2
The ramp in the railway station has rough surface .why?
Answer:
To increase the friction so we do not slip while walking.
Explanation:
If the surface is smooth then the frictional force between the ramp and the feet becomes less and the chances of slipping are greater.
4. Two technicians are discussing the evaporative emission monitor. Technician A says that serious monitor faults cause a blinking malfunction indicator lamp
(MIL) or even an engine shutdown. Technician B says that the engine computer will run the EVAP monitor when fuel level is within 15 to 25 percent and the TP
sensor position is between 9 and 10 percent. Who is correct?
O A. Neither Technician A nor B
O B. Both Technicians A and BN
O C. Technician A
OD. Technician B
Answer:
The correct option is;
Neither Technician A nor B
Explanation:
The evaporative emission monitor or Evaporaive Emission Control System EVAP System monitors enables the Power Control Module of the car to check fuel system leak integrity and the vapor consumption efficiency during engine combustion
It is a requirement of EPA on cars to check the emission of smug forming evaporates from cars
Serious monitor faults can cause the turning on of the check engine lights and the vehicle will not pass OBD II test, but it will not lead to engine shutdown
It runs when the engine is 15 to 85% full and the TP sensor is between 9% and 35%.
Therefore, the correct option is that neither Technician A nor B are correct.
A large piece of ground is developed with lights, streets, and sewers. The subdivider wants to get it ready for building. He does an environmental impact statement and makes a large map which shows where each lot and block is located. Streets, parks, and utility easement are also shown. This is visual representation is called:
Answer:
Subdivision plat map
Explanation:
A subdivision plat map is a map plan of a given scale having the planned lot subdivisions and amenities. Subdivision plat map also show easement boundaries, access routes, streets and alleyways present in or adjacent to the tract of land that is being subdivided into lots
The process of subdivision of a tract land of land requires the approval the counties and the cities in which the land is located.
Which of the following is the last step in creating a budget?
A. Identify income
B. Identify variable expenses
C. Identify fixed expenses
D. Determine savings or debt
Answer:
D. Determine saving or debt
Explanation:
The application of technology results in human-made things called
Answer:
Internet of things
Explanation:
This is a good example where the application of technology results are applied to human made things.
Internet of things (IOT), involves the application of one technology results–the internet, embedded into devices such as refrigerator, television etc so as to send and receive data (digital instructions). Such applications of technology results has revolutionized the way we use "human made things".
what recent major breakthroughs are attributed to engineers in improving the quality of our everyday lives?
From the mass production of the automobile to space travel, from the telephone to the Internet, and from bioengineered foods to clean water, engineers have applied their expertise to improve the quality of our lives
Which element refers to musically depicting the emotion in the words of a musical piece?
A intellectual movement of humanism
B. word painting
C. balancing the usage of rhythm and tone color
D. combining lyrics and rhythm in a motet
Answer:
The correct option is;
B. Word painting
Explanation:
Word painting is the musical art of composition of music literally describing by reflection the action of the lyrics of the music. Word painting is also referred to as text painting or tone painting. Word painting is a technique commonly used in Renaissance music such as madrigals and the technique of word painting can also be found in church music such as in Hendel's Messiah
An example of word painting is where ascending set of musical notes will be paired with lyrics about increasing.
Answer: B. Word painting
Explanation:
Unless otherwise posted, the speed limit for cars in a residential area is
A: 25 miles
per
hour
B: 30 miles per hour.
C: 35 miles per hour.
Answer:
The answer is A (25 miles per hour).
Answer:
A. 25 miles
Explanation:
It is that low because people need to have enough time to stop a sudden stop light or pedestrian. Often times people hit people because they are wearing dark clothing or someone stepped out into a unprotected intersection.
Engineers are looking for a new material to build the body of an airplane. They agree that the material must be lightweight, but also strong and long-lasting. Above all, the material must maximize the safety of the passengers. Several engineers have developed some initial plans. Which stage of technological design is described in this passage
Answer:
Design a solution
Explanation:
In the design a solution stage, solutions and ideas to solve the problem or design of the product are generated and details of the problem solution or product design are developed
The generated ideas and details are put together to get a workable solution
Stages of technological design, includes
1) Problem identification
2) Design a solution or designing of a product
3) Design Implementation
4) Solution or product evaluation
First Aid is used for all of the stated reason except:
O Protect Life
O Prevent injury
O Promote recovery
O Preserve life
prevent injury
Explanation:
one is already injured Soo there's no protection there
Prescription eye protection suitable for an electrician should always include a. a safety strap b. soft nose guards c. side shields d. tinted lenses
Answer:
The correct option is;
Side shields
Explanation:
Electricians working at a construction site are exposed to arc flashes and sparks which can enter into the eyes causing painful sensation as such a prescription eye protection suitable for an electrician according to OSHA regulations the employer should ensure that the electrician makes use of eye protection that has side protection in situations that include hazards from flying objects.
how many types of engineering specialist are there?
There are now six major branches of engineering: Mechanical, Chemical, Civil, Electrical, Management, and Geotechnical, and literally hundreds of different subcategories of engineering under each branch.
There are about 40 types of engineering specialists
Your friend wears earbuds while driving to school each day. Is this safe? Is it legal? Explain why or why not.
Answer:
Its not safe but it isn't illegal. Its not safe because if their volume was up they wouldn't be able to hear if someone is honking at them or listen to emergency vehicles. They would be oblivious to what's going on around them.
Explanation:
im an amazing guy <3
What is kinetic energy?
Answer:
kinetic energy means energy which a body possesses by virtue of being in motion
Answer:
Kinetic Energy is a type of energy which a body possesses by virtue of being in motion.
OR
It's the energy of mass in motion.
Hope it helps!!Please mark me as the brainliest!!!Thanks!!!!
If you think a hazard is serious, what is the best way to ensure that OSHA will
conduct a site inspection?
Help
Answer:
The best way to ensure that OSHA will conduct a site inspection is by the submission a signed (by a current employee or employee representative) Formal Written complaints following OSHA guidelines (which can be found in the Council of Safety and Health (COSH) website) which will enable the commencement of process for an on site inspection
As such it is advisable to go through the following procedure before, filing a complaint
1) Talk to your workers union about the hazard
2) If you do not belong to a union, talk to your co-workers
3) Inform your employer who has responsibility for on the job safety
4) Speak or have a meeting with OSHA so as to receive guidance before filing a complaint
Explanation:
If you think a hazard is serious, the best way to ensure that OSHA will conduct a site inspection is to file a complaint.
Hazard simply means a potential source of harm. It should be noted that hazards can have detrimental effect on the health of an individual.
If you think a hazard is serious, the best way to ensure that OSHA will conduct a site inspection is to file a complaint asking OSHA to inspect the workplace. In a situation whereby OSHA finds a serious hazard, it'll be kept confidential.
Read related link on:
https://brainly.com/question/25604446
Two technicians are discussing solder wire repair. Technician A says that electrical tape can be used to cover the joint. Technician B says that heat shrink tubing can be used to cover the joint. Who is correct?
Answer:
8282777727e7e87e7e8e88282883
Question 6: Which of the following is NOT true if you are changing into a
turning lane?
You should activate your signals 100 feet beforehand
You should activate your signals when you get into the turn lane
You should activate your signals before you get into the turn lane
You should use your hands to signal if your lights do not work
Answer:
You should activate your signals 100 feet before you turn, becuase of that you should not wait until you are turning to turn on your signals. If you do not have working lights use your hands. So the answer that is inccorect is B.
You should activate your signals when you get into the turn lane is NOT true
Because you are supposed to single beforhand not while you're in the lane.
Im taking my drivers ed too. :)
what is your favorite generation of the mustang?
Answer:
6TH AKA THE 2015-PRESENT
Explanation:
Answer:
I like them all except '74ish all the way up to '93.
Which type of engineering design uses an already existing design?
A. top-down design
B. spiral design
C. bottom-up design
D.
incremental design
Answer:
The correct option is;
C. Bottom-up design
Explanation:
The bottom-up design is meant for system redesign or re-engineering of an existing design involving component upgrading or legacy systems replacement
The bottom-up design approach is also meant for applications where there is a new interface requirement for the original system in order to determine the functionality of the newly combined systems and also where a novel component is incorporated into the existing design.
The bottom-up approach starts with the analysis of the interoperability of the components to the modules and eventually the analysis of the system requirements.
Explain orthographic
and multi-view
projection
Answer:
Orthographic projection is a projection method to present three-dimensional shapes in two-dimensional format in which the projection lines are drawn to be orthogonal to the plane of projection, such that each view of the three-dimensional object is translated to a view of the orthographic projection and orthogonal to the view
A multiview projection is the representation of a three-dimensional projection by two or more two-dimensional views
Explanation:
__is a mechanical force generated by a solid object moving through a fluid.
Answer:
Drag
Explanation:
What is version control?
Answer:
version control are a category of software tool that help a software team manage changes to source code over time.
A ____ is marked by two sets of double yellow lines, with each set having a broken line on the inside, and a solid line on the outside. white arrows appear in this lane as well.
Answer:
center left-turn lane
Explanation:
A center left turn lane will be marked as described. The arrows, if present, generally indicate that left turns are permitted from the lane with these markings.
__
If the double yellow lines are solid, they are considered to be a "barrier" and are not to be crossed.
Answer:
center left-turn lane
Explanation:
what is the difference between science and engineering?
Answer:
The following table is among some of the discrepancies between some of the different topics.
Explanation:
Science seems to be the application of structured organized facts which could be interpreted scientifically because when engineering would be a branch of science which deals with either the profession of acquiring including using technological, computational, economical and severity of adverse effects to design and manufacture equipment and devices that seem to be beneficial to mankind.Science would be a set of information and established frameworks whereas the use of these models and information to construct structures as well as mechanisms becomes engineering.Atmospheric air at 1 atm has a dry-bulb temperature of 20°C and a wet-bulb temperature of 15°C. Determine the dew point temperature
Answer:
The dew point temperature is 11.65°C
Explanation:
Dew point temperature formula is given as follows;
From the modified Apjohn equation, we have;
[tex]P_v = P'_v -\dfrac{1.8 \times p (t - t')}{2700}[/tex]
Which gives;
The saturation vapor pressure at 15°C = 1.705 kPa
[tex]P'_v[/tex] = 1.705 kPa
p = 101.325 kPa
[tex]P_v[/tex] = 1.705 - 1.8*101.325*(20 - 15)/2700 = 1.36725 kPa
The dew point temperature is the steam saturation temperature at 1.36725 kPa
= 6.9696 + (17.4953 - 6.9696)*(0.0136725 - 0.01)/(0.02 - 0.01) = 10.84°C by approximation calculation from steam tables and 284.8 K = 11.65°C from Wolfram Alpha.
