If this experiment was performed again, but this time, 5.0 g of the mixture were used, then, assuming the same mass percentages (5 % cellulose, 47.5 % caffeine, and 47.5 % benzoic acid), what is the theoretical mass (in g) of cellulose in this mixture

Explanation:

A=Butan-2-one

B=Pentan-3-one

Answer:

D. amine and alcohol

Explanation:

Organic compounds are identified using the functional group they contain. The functional group defines their peculiarity and chemical identity. For example, alkenes are identified by a double bond functional group (=), alcohols are identified by an hydroxyl functional group (OH) etc.

According to this question, a compound was given as an attached image. The compound posseses:

- an hydroxyl group (OH) indicating that it has an ALCOHOL functional group

- an N-H group indicating that it has an amine functional group

Answer:

In a combination redox reaction, two or more reactants, at least one of which is a(n) element, form a(n) compound. General Reaction: X + Y > Z

In a decomposition redox reaction, a(n) compound forms two or more products, at least one of which is a(n) element. General Reaction: Z>X+Y

In double-displacement (metathesis) reactions, such as precipitation and acid-base reactions, atoms (or ions) of two compounds exchange places; these reactions are not redox processes. General Reaction: AB+CD>AD+CB

In solution, single-displacement reactions occur when a(n) atom of one element displaces the atom of another. Since one of the reactants is a(n) element, all single-displacement reactions are redox processes. General Reaction: X+YZ>XY+Z

Explanation:

In a combination redox reaction, two or more reactants, at least one of which is a(n) element, form a(n) compound.

General Reaction: X + Y > Z

In the reaction scheme above, X combines with Y to give Z as a product.

In a decomposition redox reaction, a(n) compound forms two or more products, at least one of which is a(n) element.

General Reaction: Z>X+Y

In the reaction scheme above, Z decomposes to X and Y

In double-displacement (metathesis) reactions, such as precipitation and acid-base reactions, atoms (or ions) of two compounds exchange places; these reactions are not redox processes since there are no changes occurring in the oxidation number of the atoms (or ions) involved.

General Reaction: AB+CD>AD+CB

In the reaction scheme above, B and D exchange places in their respective compounds

In solution, single-displacement reactions occur when a(n) atom of one element displaces the atom of another. This type of reaction is due to the difference in the reactivities of the elements. The more reactive atom of one element displaces the least reactive atom of another element from its solution.

Since one of the reactants is a(n) element, all single-displacement reactions are redox processes.

General Reaction: X+YZ>XY+Z

In the reaction scheme above, X displaces Z from the compound YZ.

Answer:

Below

Explanation:

Got it right

Check the periodic table, then click electrons

Answer:

1. Write the balanced chemical equation for the reaction

2. Identify all important information provided in the word problems or data table.

3. Solve for the theoretical yield of the reaction, following all the steps of a stoichiometry calculation organizer. Use two calculations if both reactants are provided.

4. Use the percent yield equation to calculate the percent yield of the reaction.

Explanation:

its comes right from the 5.06 lesson

Answer:

Compound A and compound B are constitutional isomers with molecular formula C3H7Cl.

When compound A is treated with sodium methoxide, a substitution reaction predominates. When compound B is treated with sodium methoxide, an elimination reaction predominates.

Explanation:

Constitutional isomers are the one which differs in the structural formula.

When compound A is treated with sodium methoxide, a substitution reaction predominates.

That means sodium methoxide is a strong base and a strong nucleophile.

But when it reacts with primary alkyl halides it forms a substitution product and when it reacts with secondary alkyl halide it forms mostly elimination product.

The reaction and the structures of A and B are shown below:

Answer:

Concentration C = 0.0189 mol/L

Explanation:

From the given information:

Let consider the formula used in calculating the concentration according to Beer's law:

[tex]\mathtt{A =\varepsilon \times L \times C}[/tex] --- (1)

here;

A = absorbance

ε = coefficient of molar absorptivity

L = path length

C = concentration (mol/L)

Also, from Beer law plot:

y = mx+b

where,

y represent absorbance A

b represents intercept

m represents the coefficient of molar absorptivity ε

and x represents the concentration(C).

replacing the substituted entities

A = ε × C + b ---- (2)

Making the concentration the subject of the above formula:

[tex]C = \dfrac{A-b}{\varepsilon}[/tex]----(3)

From y = 11.589x - 0.0002

A = 11.589 *C - 0.0002

Given that:

A = 0.219

∴

0.219 = 11.589 *C - 0.0002

0.219 + 0.0002 =  11.589 *C

C = 0.2192/11.589

C = 0.0189 mol/L

Answer:

The intensity of the color directly changes in response to the concentration

Explanation:

One of the major indicators of the concentration of a solution is the colour of the solution.

The colour of the solution changes as the concentration of the solution changes. If the solution becomes more concentrated, the colour of the solution becomes deeper. If the solution becomes more dilute, the colour of the solution becomes lighter.

It then follows that, the intensity of the color of a solution directly changes in response to the concentration of the solution.

Answer:

My nettttttworkkkk is slowww

Answer:

1.9 × 10² g NaN₃

1.5 g/L

Explanation:

Step 1: Write the balanced decomposition equation

2 NaN₃(s) ⇒ 2 Na(s) + 3 N₂(g)

Step 2: Calculate the moles of N₂ formed

N₂ occupies a 80.0 L bag at 1.3 atm and 27 °C (300 K). We will calculate the moles of N₂ using the ideal gas equation.

P × V = n × R × T

n = P × V / R × T

n = 1.3 atm × 80.0 L / (0.0821 atm.L/mol.K) × 300 K = 4.2 mol

We can also calculate the mass of nitrogen using the molar mass (M) 28.01 g/mol.

4.2 mol × 28.01 g/mol = 1.2 × 10² g

Step 3: Calculate the mass of NaN₃ needed to form 1.2 × 10² g of N₂

The mass ratio of NaN₃ to N₂ is 130.02:84.03.

1.2 × 10² g N₂ × 130.02 g NaN₃/84.03 g N₂ = 1.9 × 10² g NaN₃

Step 4: Calculate the density of N₂

We will use the following expression.

ρ = P × M / R × T

ρ = 1.3 atm × 28.01 g/mol / (0.0821 atm.L/mol.K) × 300 K = 1.5 g/L

Answer:

the amount of a substance that will dissolve in a given amount of solvent.

Explanation:

Solubility is a term used to describe how readily a substance can be dissolved in a solvent to form a solution. Thus, a substance is said to be soluble if it dissolves completely in a solvent and insoluble if it doesn't dissolve or only dissolves partially.

For example, sodium chloride (NaCl) when mixed with water dissociates into sodium and chloride ions. Thus, salt (sodium chloride) is said to be soluble because it dissolves completely in water.

Furthermore, a compound that dissolves completely in water to produce an aqueous solution is said to be soluble in water.

In conclusion, solubility is simply the amount of a substance such as salt, that will dissolve in a given amount of solvent. A solvent is any liquid such as water, coffee, tea, etc., that dissolves a liquid, gaseous, or solid solute to produce a solution.

Answer:

you don't know the answer?ha me too

Answer:

D. The isotope that undergoes radioactive decay to form a more stable isotope.

Explanation:

In radioactivity, isotopes of an unstable atom disintegrates/decays into more stable ones accompanied with the emissions of certain particles e.g alpha, gamma and beta particles.

In this process, the isotope of the atom that undergoes radioactive decay to form a more stable isotope is known as the PARENT ISOTOPE while the more stable isotope that arises from the decay is called the DAUGHTER ISOTOPE.

(238, 92) Uranium → (234,90) Thorium + (4,2) Helium

In the above reaction, Uranium is the parent isotope because it decays into a more stable isotope (Thorium).

Answer:

He's Right

Explanation:

i got it right

Answer:

the TWO characteristics of an effective collision are:

1.Molecules collide with sufficient energy

2.Molecules collide with the proper orientation.

Answer:

See explanation and image attached

Explanation:

Grignard reagent is any organic compound that is classified as an alkyl or aryl magnesium halide (RMgX).

Grignard reagents are produced when the alkyl halide reacts with magnesium metal in ether and tetrahydrofuran as solvents.

They are good nucleophiles and are involved in the synthetic routes to many important classes of organic compounds.

The formation of Grignard reagent from bromobenzene is shown in the image attached to this answer.

Answer:

0.186 moles

Explanation:

In order to convert grams of PCl₅ into moles, we need to use its molar mass:

Then we proceed to calculate the number of moles:

In the given question Phosphorus pentachloride is used as a catalyst for certain chemical reaction. 38.7 g of [tex]\rm PCl_5[/tex], there are 0.186 moles of [tex]\rm PCl_5[/tex].

A catalyst is a substance that increases the rate of a chemical reaction by lowering the activation energy required for the reaction to occur.

To calculate the number of moles in 38.7 g of [tex]\rm PCl_5[/tex], we need to divide the given mass of [tex]\rm PCl_5[/tex] by its molar mass.

The molar mass of [tex]\rm PCl_5[/tex] can be calculated by adding the atomic masses of one phosphorus atom and five chlorine atoms:

Molar mass of  [tex]\rm PCl_5[/tex] = (1 x atomic mass of P) + (5 x atomic mass of Cl)

= (1 x 30.97 g/mol) + (5 x 35.45 g/mol)

= 208.22 g/mol

Now, we can calculate the number of moles of  [tex]\rm PCl_5[/tex]:

Number of moles = mass / molar mass

= 38.7 g / 208.22 g/mol

= 0.186 moles

Therefore, there are 0.186 moles of  [tex]\rm PCl_5[/tex] in 38.7 g of  [tex]\rm PCl_5[/tex].

Learn more about catalyst here:

https://brainly.com/question/24430084

#SPJ6

Answer:

1.75L

Explanation:

Reaction of decomposition is:

2KClO₃(s) →  2KCl(s) + 3O₂(g)

We determine moles of salt:

4.35 g . 1 mol /122.55 g = 0.0355 moles

Ratio is 2:3. 2 moles of salt can produce 3 moles of oxygen

Then, our 0.0355 moles of chlorate may produce (0.0355 . 3)/ 2 = 0.0532 moles.

We have determined, moles of gas and we have data of pressure and temperature. To find out the volume, we apply the Ideal Gases Law:

We convert T° from °C to K → 27°C + 273 = 300K

P . V = n . R . T

0.75 atm . V = 0.0532 mol . 0.0821 L.atm/mol.K . 300K

V = (0.0532 mol  . 0.0821 L.atm/mol.K . 300K) / 0.75 atm

V  = 1.75 Liters

Answer:

A) Molecular weight

B) Rate of diffusion

C) Agar plates

Time of diffusion

Explanation:

A) The independent variable is the molecular weight because it is the variable that the researcher changes at will to aid his research. It doesn't depend on other variables.

B) The dependent variable is "Rate of diffusion because it depends on the molecular weight of the compound.

C) A control variable is one that would be held constant throughout the research.

In this case, the agar plates and the time of 2 hours diffusion remain the same throughout.

Answer: The pH of the resulting solution will be 3.60

Explanation:

Molarity is calculated by using the equation:

[tex]\text{Molarity}=\frac{\text{Moles}}{\text{Volume}}[/tex] ......(1)

We are given:

Molarity of formic acid = 0.100 M

Molarity of potassium formate = 0.100 M

Volume of solution = 420 mL = 0.420 L (Conversion factor: 1 L = 1000 mL)

Putting values in equation 1, we get:

[tex]\text{Moles of formic acid}=(0.100mol/L\times 0.420L)=0.0420mol[/tex]

[tex]\text{Moles of potassium formate}=(0.100mol/L\times 0.420L)=0.042mol[/tex]

Molarity of KOH = 1.00 M

Volume of solution = 7 mL = 0.007 L

Putting values in equation 1, we get:

[tex]\text{Moles of KOH}=(1mol/L\times 0.007L)=0.007mol[/tex]

The chemical equation for the reaction of formic acid and KOH follows:

                 [tex]HCOOH+KOH\rightleftharpoons HCOOK+H_2O[/tex]

I:                   0.042     0.007       0.042

C:                -0.007    -0.007     +0.007

E:                  0.035         -           0.049

Volume of solution = [420 + 7] = 427 mL = 0.427 L

To calculate the pH of the acidic buffer, the equation for Henderson-Hasselbalch is used:

[tex]pH=pK_a+ \log \frac{\text{[conjugate base]}}{\text{[acid]}}[/tex] .......(2)

Given values:

[tex][HCOOK]=\frac{0.049}{0.427}[/tex]

[tex][HCOOH]=\frac{0.035}{0.427}[/tex]

[tex]pK_a=3.75[/tex]

Putting values in equation 2, we get:

[tex]pH=3.75-\log \frac{(0.049/0.427)}{(0.035/0.427)}\\\\pH=3.75-0.146\\\\pH=3.60[/tex]

Hence, the pH of the resulting solution will be 3.60

Answer:

The reaction rate increases in direct proportion to the concentration of the reactant in solution - second order reaction

The reaction rate is constant regardless of the amount of reactant in solution - zero order reaction

An increase in the concentration of the reactant in solution causes the reaction rate to increase exponentially - first order reaction

Explanation:

In a second order reaction, the rate of reaction is directly proportional to the concentration of reactants. This implies that, reaction rate varies as the concentration of the reactant in solution varies.

For a zero order reaction, the rate of reaction is independent of the concentration of the reactants in solution. This means that reaction rate is constant regardless of the amount of reactant in solution.

For a first order reaction, the rate of reaction varies exponentially as the concentration of reactants. Hence, an increase or decrease in the concentration of the reactant in solution causes the reaction rate to increase or decrease exponentially.

Answer:

The solubility of the gaseous solute decreases

Explanation:

As we know, pressure decreases with altitude. This means that, at higher altitudes, the pressure is much lower than it is at sea level.

The solubility of a gas increases with increase in pressure and decreases with decrease in pressure.

Hence, in Denver, Colorado where the elevation is about 5,280 feet above sea level, a gaseous solute is less soluble than it is at sea level due to the lower pressure at such high altitude.

Answer:

0.0457 M

Explanation:

Concentration is the amount of a substance in a predefined volume of space. The basic measurement of concentration in chemistry is molarity or the number of moles of solute per liter of solution. What is the molarity of a solution containing 9.478 grams of RuCl₃, in enough water to make 1.00 L of solution?

Step 1: Given data

Step 2: Calculate the moles corresponding to 9.478 g of RuCl₃

The molar mass of RuCl₃ is 207.4 g/mol.

9.478 g × 1 mol/207.4 g = 0.04570 mol

Step 3: Calculate the molarity of the solution

We will use the definition of molarity.

M = moles of solute / liters of solution

M = 0.04570 mol / 1.00 L = 0.0457 M

Answer:

V = 365.54 mL

Explanation:

Given that,

The density of chloroform, d = 1.48 g/mL

The mass of chloroform, m = 541 g

We need to find the volume of chloroform.

We know that,

Density = mass/volume

So,

[tex]V=\dfrac{m}{d}\\\\V=\dfrac{541\ g}{1.48\ g/mL}\\\\=365.54\ mL[/tex]

So, the volume of chloroform is 365.54 mL.

Answer:

2Rb(s) + Sr^+(aq) → 2Rb^+ (aq) + Sr(s)

Explanation:

Rubidium has a more negative reduction potential (-2.98 V) compared to strontium (-2.89 V).

Hence, in a redox reaction involving rubidium and strontium, rubidium will be oxidized while strontium is reduced.

The balanced redox reaction equation is obtained from;

Oxidation half equation;

2Rb(s) ---->2Rb^+(aq) + 2e

Reduction half equation;

Sr^2+(aq) + 2e ----> Sr(s)

Overall reaction equation;

2Rb(s) + Sr^+(aq) → 2Rb^+ (aq) + Sr(s)

Answer:

2.39 moles

Explanation:

From the question given above, the following data were obtained:

Pressure (P) = 2.34 atm

Volume (V) = 25.6 L

Temperature (T) = 305 K

Number of mole (n) =?

NOTE: Gas constant (R) = 0.0821 atm.L/Kmol

The number of mole of CO₂ can be obtained by using the ideal gas equation as shown below:

PV = nRT

2.34 × 25.6 = n × 0.0821 × 305

59.904 = n × 25.0405

Divide both side by 25.0405

n = 59.904 / 25.0405

n = 2.39 moles

Thus, the number of mole of CO₂ is 2.39 moles.

Answer:

2.39

Explanation:

got it right on a quiz for credit recovery

Answer:Answer: BeCl2 And CO2 Both Molecules Have The Same - OOOOOOO Molecular Geometry (molecular Shape) Number Of Covalent Bonds To The Central Atom Total Number Of Each Type Of Bond (single, Double, Triple) Number Of Electron Pairs Around The Central Atom Electron Region Geometry (3-D Arrangement Of Electron Pair Regions

Explanation: