If I add 50 mls of water to 300 mls of 0.6M KNO3 solution, what will be the molarity of the diluted solution?

Explanation:

This picture shows how the moon from earth when it is in position

Answer:

A niche is more than a physical place; it's a species' role in a specific place and it can change from habitat to habitat.                  

Explanation:

Niche: In biology, the term "niche" is described as a process through which different organisms tends to fit-in into a specific ecosystem or an ecological community. However, a niche is considered as the "evolutionary result" of a specific species behavioral, morphological, and physiological adaptations associated with its surroundings.

Habitat: In biology, the term "habitat" is described as an environmental or ecological area that is being inhabited by a specific species of plants, animals, or other organisms.

Therefore, a niche is entirely different from a habitat because an organism's niche tends to explain every different aspect of its life whereas its habitat explains the place it lives.

Answer:

.It is easily synthesized from the reaction of propylene with sulfuric acid, followed by hydrolysis. Isopropyl alcohol (2-propanol) is made by indirect hydration of propylene (CH2CHCH3).… In some cases the hydration of propylene is carried out in one step, using water and a catalyst at high pressure.

Hope it'll help!

stay safe:)

Answer:

.00352mol/L

Explanation:

molarity (concentration) = number of moles / volume of solvent (in L)

M = .99g / 56.108‬g/mol / .5L

M = .0176mol / .5L

M = .00352mol/L

After the body is cleaned, the body is weighed and measured before being placed on the autopsy table for reexamination. The autopsy table is typically a slanted, aluminum table with raised edges that has several faucets and drains used to wash away collecting blood during the internal investigation.

Answer:

A table used to scientifically determine the cause of death of a human or animal

Explanation:

Answer:

In the case of Mount Pinatubo, the result was a measurable cooling of the Earth's surface for a period of almost two years. Because they scatter and absorb incoming sunlight, aerosol particles exert a cooling effect on the Earth's surface.

Explanation:

Temperature measures the average kinetic energy of particles of the substances. Therefore, the Mt. Pinatubo eruption result in global temperatures dropping almost two degrees.

Temperature is used to measure degree or intensity of heat of a particular substance. Temperature is measured by an instrument called thermometer.

Temperature can be measured in degree Celsius °c, Kelvin k or in Fahrenheit. Temperature is a physical quantity. Heat always flow from higher temperature source to lower temperature source.

We can convert these units of temperature into one another. The relationship between degree Celsius and Fahrenheit can be expressed as:

°C={5(°F-32)}÷9

The Mt. Pinatubo eruption result in global temperatures dropping almost two degrees because they scatter and absorb incoming sunlight, aerosol particles exert a cooling effect on the Earth's temperature.

Therefore, the Mt. Pinatubo eruption result in global temperatures dropping almost two degrees.

To know more about temperature, here:

https://brainly.com/question/13694966

#SPJ6

Answer:

Power, P = 300 W

Explanation:

We have,

Force acting on the box to take it is 300 N

It is moved to a distance of 10 m in 10 seconds

It is required to find the power required to move the box. The rate at which work is done is called power required by an object. It can be given by the formula as follows :

[tex]P=\dfrac{W}{t}\\\\P=\dfrac{Fd}{t}\\\\P=\dfrac{300\times 10}{10}\\\\P=300\ W[/tex]

So, the power required is 300 W.

Answer:

98.3 gradius Celsius

Explanation:

This problem is solved using the Ideal Gas Equation

pV = nRT

...

Please see the step-by-step solution in the picture attached below.

Hope this answer can help you. Have a nice day!

Answer:

400 kPa

Explanation:

Please see the step-by-step solution in the picture attached below.

Hope this answer can help you. Have a nice day!

Answer:

400 kPa

The answer is right since its from ck12

Answer:

Actual yield reduces the more.

Explanation:

An actual yield of the course of a chemical reaction is the mass of a product actually obtained from the reaction.

In practice you see it and It is usually less than the theoretical yield.

Various reasons may come up to explain this away but here is one:

• incomplete reactions, simply put here some of the reactants do not react to form the product.

The same applies in the question about the actual yield will reduce significantly in molar mass now that insufficient amount of reagent are used.

Answer:

[tex]V_2=583.3mL[/tex]

Explanation:

Hello,

In this case, for the given constant amount and pressure of the, we apply the Charles' law which allows us to understand the volume-pressure behavior as a directly proportional relationship:

[tex]\frac{V_1}{T_1} =\frac{V_2}{T_2}[/tex]

Thus, since we need to compute the volume after the temperature increase (which must be expressed in absolute Kelvins), we obtain V2 as:

[tex]V_2=\frac{V_1T_2}{T_1} =\frac{350.0mL*(227+273.15)K}{(27+273.15)K}\\ \\V_2=583.3mL[/tex]

Best regards.

Due to prokaryote

Explanation:

Answer:

- 7 carbon atoms.

- 14 hydrogen atoms.

- 1 oxygen atom.

Explanation:

Hello,

In this case, for the given compound, heptanone, whose chemical formula is:

[tex]CH_3COCH_2CH_2CH_2CH_2CH_3[/tex]

We can write the molecular formula showing the present atoms of each element:

[tex]C_7H_{14}O[/tex]

In such a way we have:

- 7 carbon atoms.

- 14 hydrogen atoms.

- 1 oxygen atom.

Best regards.

Answer:

See explaination

Explanation:

1. The addition of group 3A elements to group 4A semiconductors decreases the conductivity of the group 4A semiconductors: Wrong

The addition of 3A group elements inreases the conductivity and make them extrinsic semiconductors( p-type)

2. The conductivity of semiconductors can be increased by the doping process.: Correct

3.As the temperature increases, the conductivity of semiconductors decreases.. wrong

As the temperature increases, the conductivity of semiconductors increases.

4. The addition of group 5A elements to group 4A semiconductors increases the conductivity of the group 4A semiconductors: Correct : They will create n-type semicoductor.

5.Holes are charge carriers in p-type semiconductors: Correct

6. Electrons are charge carriers in n-type semiconductors: Correct

Explanation:

6.02×1023 culture atoms have a mass of 63.5g. 12.0g. c +23.0g O2__44.0g CO2.(12.0+16.0+16.0=44.0g).1 mol 1 mol. 1 mol number molecules weight

The number of molecules in one mole of carbon dioxide is 6.02 × 10²³. Therefore, the number of moles of carbon dioxide which contains 4.11 × 10²³ molecules is 0.68.

The number of atoms that constitutes one mole of a substance is called Avogadro number. It is equal to  6.02 × 10²³. Thus, one mole of every elements contains Avogadro number of atoms.

Similarly, one mole of a compound contains  6.02 × 10²³ number of molecules. Thus, one mole of carbon dioxide contains these much molecules.

Given the number of molecules of carbon dioxide = 4.11 × 10²³

Then, no.of moles = number of molecules/ Avogadro number.

no.of moles = 4.11 × 10²³ /6.022 × 10²³  = 0.68.

Therefore, the number of moles of CO₂ that contains 4.11 × 10²³  molecules is 0.68.

Find more on Avogadro number:

https://brainly.com/question/28834341

#SPJ5

Answer:

1.3×10⁻³ M

Explanation:

Hello,

In this case, given the dissociation reaction of acetic acid:

[tex]CH_3CO_2H(aq) + H_2O(l) \rightleftharpoons H_3O^+(aq) + CH_3CO_2^-(aq)[/tex]

We can write the law of mass action for it:

[tex]Ka=\frac{[H_3O^+][CH_3CO_2^-]}{[CH_3CO_2H]}[/tex]

Of course, excluding the water as heterogeneous substances are not included. Then, in terms of the change [tex]x[/tex] due to the dissociation extent, we are able to rewrite it as shown below:

[tex]1.8x10^{-5}=\frac{x*x}{0.100-x}[/tex]

Thus, via the quadratic equation or solve, we obtain the following solutions:

[tex]x_1=-0.00135M\\x_2=0.00133M[/tex]

Obviously, the solution is 0.00133M which match with the hydronium concentration, thus, answer is: 1.3×10⁻³ M in scientific notation.

Regards.

Answer:

1.3×10^-3 M

Explanation:

Step 1:

Data obtained from the question:

Equilibrium constant (Ka) = 1.8×10^-5

Concentration of acetic acid, [CH3COOH] = 0.100 M

Concentration of hydronium ion, [H3O+] =..?

Step 2:

The balanced equation for the reaction.

CH3CO2H(aq) + H2O(l) ⇌ H3O+(aq) + CH3CO2-(aq)

Step 3:

Determination of concentration of hydronium ion, [H3O+].

This can be obtained as follow:

Ka = [H3O+] [CH3CO2-] / [CH3CO2H]

Initial concentration:

[CH3COOH] = 0.100 M

[H3O+] = 0

[CH3CO2-] = 0

During reaction

[CH3COOH] = – y

[H3O+] = +y

[CH3CO2-] = +y

Equilibrium:

[CH3COOH] = 0.1 – y

[H3O+] = y

[CH3CO2-] = y

Ka = [H3O+] [CH3CO2-] / [CH3CO2H]

1.8×10^-5 = y × y / 0.1

Cross multiply

y^2 = 1.8×10^-5 x 0.1

Take the square root of both side

y = √(1.8×10^-5 x 0.1)

y = 1.3×10^-3 M

[H3O+] = y = 1.3×10^-3 M

Therefore, the concentration of the hydronium ion, [H3O+] is 1.3×10^-3 M

Answer:

C)

Explanation:

JUST DID IT

Answer:

A D E

Explanation:

just did it

Answer:

3 pieces of lunch-meat and 2 slices of cheese

Explanation:

You have enough bread to make 3 sandwiches

You have enough lunch-meat to make 4 sandwiches

You have enough cheese to make 5 sandwiches

In all you have enough material to make 3 sandwiches

so if you subtract three from each number above you will have no bread, enough lunch-meat to make one sandwich and enough cheese to make two sandwiches

luch-meat for one sandwich is: 3 pieces

Cheese for two sandwiches is:  2 pieces

Answer:

the motion of gravity

Explanation:

Answer:

its c

Explanation

advhuosijoklxcmnjdabsuhggggabciaciudeifweingivg eygerigsygfe97rsghisdcvhbsduigwiugfu9uigdgiurfgyisdgfsdgfegiygewifgsdygfewusgfuyesigf7wgfiesgfiusgdfies

hEy!!!

Chlorine(CL) is the symbol for the entity that has 17 protons,20 neutrons and 18 electrons.

Hope it will be helpful to you...

Answer:chlorine

Explanation:

Answer:

[tex]M=1.1M[/tex]

Explanation:

Hello,

In this case, since we are mixing two NaOH solutions, the first step is to compute the total moles once the mixing is done, by using the volumes and concentrations of each solutions and subsequently adding them:

[tex]n_T=2.0L*0.60\frac{mol}{L}+495mL*\frac{1L}{1000mL}*3.0\frac{mol}{L}= 2.7molNaOH[/tex]

Next, we compute the total volume by adding the volume of each solution:

[tex]V_T=2.0L+495mL*\frac{1L}{1000mL}= 2.495L[/tex]

Finally, we compute the molarity of the resulting solution by the division between the total moles and the total volume:

[tex]M=\frac{2.7mol}{2.495L}\\ \\M=1.1M[/tex]

Best regards.

Answer:

The mass of zinc sulfide produced is  [tex]M_{ZnS} = 0.76 \ g[/tex]

Explanation:

From the question we are told that

   The mass of zinc is  [tex]m_z = 0.750 \ g[/tex]

    The mass of sulfur is  [tex]m_s = 0.250 \ g[/tex]

The molar mass   of  [tex]Zn_{(s)}[/tex]  is a constant with value  65.39 g /mol

The molar mass of [tex]S_{(s)}[/tex]  is a constant with value  32.01 g/mol

The molar mass of  [tex]ZnS_{(s)}[/tex] is a constant with value 97.46  g/mol

The reaction is  

        [tex]Zn_{(s)} + S_{(s)} ------> ZnS_{(s)}[/tex]

   So from the reaction

       1 mole of  [tex]Zn_{(s)}[/tex] react with 1 mole of  [tex]S_{(s)}[/tex] to produce 1 mole of [tex]ZnS_{(s)}[/tex]

This implies that

65.39 g /mol of  [tex]Zn_{(s)}[/tex] react with 32.01 g/mol of  [tex]S_{(s)}[/tex] to produce   97.46  g/mol  of [tex]ZnS_{(s)}[/tex]

From the values given we can deduce that the limiting reactant is sulfur cause  of the smaller mass

 So  

    0.250 g of  [tex]Zn_{(s)}[/tex] react with 0.250 of  [tex]S_{(s)}[/tex] to produce [tex]x \ g[/tex] of  [tex]ZnS_{(s)}[/tex]

So

      [tex]x = \frac{97.46 * 0.250}{32.01}[/tex]

       [tex]x = 0.76 \ g[/tex]

Thus the mass of the mass of zinc sulfide produced is

    [tex]M_{ZnS} = 0.76 \ g[/tex]

Answer:

C. cooler than both the crust and the core

Explanation:

It is observed that at the mantle, temperatures range from estimatedly 200 °C (392 °F) around the upper boundary with the crust to approximately 4,000 °C (7,230 °F) at the core-mantle boundary.

So we can say the mantle is cooler than both the crust and the core.

Answer:

- Increase pressure .

Explanation:

Hello,

In this case, during the dissolution process, the solute's molecules rearrange in order to get together with the solvent's molecules, in this case water.

Now, since we are talking about a solid whose particles are intimately held together, the only way to separate them is by increasing the temperature because the molecules start moving so they can join water's molecules, decreasing particle size since they will be more likely to separate to each other and increasing stirring since the applied energy will break the solid's intramolecular forces.

In such a way, since pressure significantly affects gases and slightly affects liquid, it is not able to modify a solid, just extreme pressures such as it needed to produce diamonds, is able to affect a solid. For that reason, increasing the pressure will not increase the solid's solubility.

Best regards.

Answer:

3 half-lives

Explanation:

The half-life is the time that it takes to a radioactive element to decay to half of its initial amount.

Let's suppose we start with 64 g of the radioactive element.

Answer:

mdjnibfziedosnninjd.zjcssksskskbsksbivfdlvdxkvfuwhiwhwonsk jsbudwuvsaeigdOhgrauvdslnzarm cxwmvakbxsabxwrifwzpgsdoh

ds