if a planetary body (such as a rocky body bigger than about 400 km diameter) is big enough, it will be spherical. why is this:

When it happens mother should have to do cool the burn with tap water for 10 to 20 minutes immediately.

Stop the burning process. Cool the burn. Supply pain relief.

Before the arrival of qualified emergency help, you should:

Pain and skin injury from wet heat or vapors can result from hot water scalding. Because the damaged tissues and cells are destroyed, this kind of burn can be deadly. The heat could even cause your body to go into shock. These burns can be fatal in more severe circumstances.

Cool the burn.

Place the affected area under cool (not cold) flowing water for about 10 minutes. Until the pain goes away, apply a cool, wet cloth to the burned area of the face. If you have a mouth burn from hot food or drink, place a piece of ice in your mouth for a while.

To know more about burn click:

https://brainly.com/question/18526186

#SPJ4

The number of times the train accelerated is 3 times.

option 3 is the correct answer.

The number of times the train accelerates in the given scenario depends on the speed or velocity of the train at every given time.

a = Δv / Δt

where;

From the formula given above, the train will only accelerate whenever there is a change in the velocity of the train. If the velocity of the train is constant, then the acceleration of the train will be zero.

The number of acceleration of the train in the given scenario is determined as follows;

Thus, from the illustration given above, the train change its speed three times and accelerated in those situation.

Learn more about acceleration here: https://brainly.com/question/14344386

#SPJ1

The velocity of vehicles after the collision is 15.82m/sec if car mass is 1.4 × 10³kg and truck mass is 2×10³kg

We know that we need to conserve the momentum of watermelon in a certain direction. Also,we know that initial momentum of watermelon is zero,it means that according to law of conservation of momentum final momentum should be zero.

We know that momentum =mass × velocity

So,initial momentum of car is =1.4 × 10³kg × 37km/hr

Similarly,,initial momentum of truck=2×10³kg × 35km/hr

Now,it is given that both vehicles lock together,so total mass of both vehicles is =1.4 × 10³kg +  2×10³kg=3.4 ×10³kg

Assume final velocity of both vehicle is v

So,following the law of conservation,we get

=>1.4 × 10³kg × 37 + 2×10³kg × 35 = 3.4 ×10³ ×v

=>51.8 ×10³ + 2×10³=3.4×10³ ×v

=>53.8 ×10³ kg-m/sec = 3.4×10³ ×v

=>v = 53.8/3.4

=>v=15.82m/sec

Hence,final velocity of both vehicle after collision is 15.82m/sec.

To know more about velocity,visit here:

https://brainly.com/question/18084516

#SPJ4

N is the total number of full load cycles, and S is the stress change. The area to the left and below the line represents cyclic stress and cycle count combinations for which no fatigue failure is anticipated to happen.

The distribution of forces, often known as stresses, under cyclic stress changes repeatedly throughout time. Imagine one of the huge wheels that propels an aerial lift, like a ski lift, as an illustration.

The plot of every one of these numbers is known as the cyclic stress-strain curve. Following plastic deformation, the material behaves as described by the curve. Typically, this activity differs from the initial action that is assessed in a conventional tensile test.

To know more about Cyclic stress visit:

https://brainly.com/question/13899363

#SPJ4

The focal length of the mirror is 50cm.

This refers to the distance from the lens or mirror to the focal point(F). It is measured in centimeters, cm or meters,m.

Formula for calculating the focal length of the mirror:

f = R * 2

Where,

f = focal length

R = the radius of curvature

What is a focal point (F)?

This refers to the point where by rays or waves meet after reflection or refraction, or the point from which diverging rays or waves appear to proceed.

In the question:

R = 25cm

f = R * 2

Substituting the values we have:

f = 25cm* 2

f = 50cm

Hence, the focal length of the mirror is 50cm.

Learn more about focal length on

https://brainly.com/question/13885819

#SPJ1

Loudness increases by 10 dB for every dB increase in sound intensity. A 40-decibel light rainstorm is 100 times louder than a whisper, whereas a 30-decibel "silent" room is 10 times louder than a 20-decibel whisper. Loud noises can be harmful.

A 10 dB rise results in a two-fold increase in volume. The loudness will therefore rise by nearly 8 times with a 30 dB increase (from 20 dB to 50 dB).

Decibels are measured on a logarithmic scale using a power of ten, which might be perplexing. For those of you without advanced math degrees, this simply implies that the sound intensity doubles for every 10 decibel rise.

learn more about Decibels refer

https://brainly.com/question/28375244

#SPJ4

5.16883548 m is the wavelength, if E.M radiation has a frequency of 58,000,000 Hz.

Given data :

Formula:

        λ = C/f

Where,

λ (Lambda) = Wavelength in meters

c = Speed of Light (299,792,458 m/s)

f = Frequency

λ  = 58,000,000 / 299,792,458 = 5.16883548

Learn more about frequency and wavelength refer to :

https://brainly.com/question/6297363

#SPJ1

Answer:

Below

Explanation:

ESE = 1/2 k d^2

        = 1/2 *  10 N/m * .1 m = .5 J

An average tendon can withstand 16000 per square inch of force (psi). The Achilles tendon may begin to fail at a force of F = 1280 pounds.

That meaning of the term "force" is obvious. At this point, it is quite acceptable to refer to a force as a push or possibly a pull. An item does not "have energy in it" or "encompass energy." A force is applied to one thing by another. A factor is anything that affects non-living things as well.

Inertia is what holds the cosmos together. Literally. That could prevent matter from having the electric forces necessary to produce its system layout. Vibrating particles generate heat and rotational motion, which operate to counteract inertia.

Area of tendon 0.4×0.2

=0.08 square inch.

0.08 square inch tendon =16000×0.08

F =1280 pound.

To know more about force visit:

https://brainly.com/question/14853868

#SPJ1

The Effective Spring Constant is [tex](\frac{k1k2}{k1 + k2} )[/tex] for a system of 2 springs with spring constant k1 and k2.

The term "spring constant" refers to the proportional constant k. It gauges the stiffness of the spring. A spring exerts a force F = -kx in the direction of its equilibrium position when it is stretched or compressed to a length that differs by an amount x from its equilibrium length.

Spring constants are available in plural (physics) a quality of a spring that is determined by the force acting on the spring to the displacement it produces.

K stands for the proportionality constant, commonly referred to as the "spring constant." In layman's words, stiffness and strength are shown by the k variable in Hooke's law (F = -kx). An item requires more force to be stretched to a specific length the greater the value of k.

Let the force actiong be F N

then , if k1 is the spring constant of spring 1

F = x1 * k1

or, x1 = F/k1.

Similarly for spring 2

x2 = F/k2

Now x1 + x2 = F (1/k1 + 1/k2)

or effective displacement

X= [tex]F(\frac{1}{k1} + \frac{1}{k2} )[/tex]

or, F = [tex]X * (\frac{k1k2}{k1 + k2} )[/tex]

So the Effective Spring Constant is [tex](\frac{k1k2}{k1 + k2} )[/tex].

To learn more about spring refer to :

https://brainly.com/question/14973217

#SPJ4

The nuclear force between two charged particles is attractive, but Coulomb repulsion prevents two charged particles from getting close enough to interact. (K= 170 keV.)

We consider the value of the initial kinetic energy K that each deuteron must possess in order for them to come to rest when their surfaces meet to be the height of the Coulomb barrier.

if r is a deuteron's radius, then by the law of conservation of energy, we get,

2K=1/4πϵo. e²/2r

putting values, we get

K= 1/4πϵo. e²/4r=9x10^9x1.6x10^-19/4x2.1x10^-15=2.75x10^-14 J = 170 keV.

J is the potential energy. Divide it by the electron charge, or 1.6 x 1019C, to convert it to eV. Consequently, the 360keV potential barrier height for a head-on collision of two deuterons. In this work,

5 feet, 6 inches, or 66 inches, is the height of a human. 2.54 centimeters make up one inch (cm). Therefore, to convert your height from inches to centimeters, just multiply it by 2.54. The metric equivalent of a person who is 5 feet, 6 inches tall in this instance is 167.64 cm (66 x 2.54).

Learn more about coulomb here:

https://brainly.com/question/15167088

#SPJ4

The speed of the wave is determined as 18 m/s.

option D is the correct answer.

The speed of the wave is the rate of change of wave's displacement with time.

The speed of the wave is calculated by applying the formula relating speed, wavelength and frequency of the wave as shown below.

v = fλ

where;

The frequency of the wave is calculated as follows;

f = 1 / T

where;

The period of a wave is the time taken for the wave to complete one cycle.

In the picture given, 3 cycles of the wave = 0.5 s

1 cycle of the wave = ?

= 0.5 s / 3

= 0.16667 s

f = 1 / T

f = 1 / 0.16667

f = 6 Hz

The speed of the wave is calculated as follows;

v = fλ

v = 6 Hz  x  3 m

v = 18 m/s

Learn more about speed of wave here: https://brainly.com/question/2142871

#SPJ1

According to the given statement 11303.5 kg  is the weight of the truck.

The buoyant force, which applies to a person at rest in a fluid, is proportional to the weight of the displaced water and pushes higher. The amount of fluid displaced when the body is fully immersed is equal to the body's volume.

The Archimedean principle, which asserts that the hydrostatic push is equal to the weight of the desalinated liquid, is used to solve this task.

B = ρ g V

It is in balance with the push when the truck is at full weight, according to Newton's law of equilibrium.

          Σ F = 0

          B-W = 0

          B = W

body weight

          W = M g

the volume is

          V = l to h

          (l to h) = M g

          M = l a h

we calculate

          M = F = 1000 . 10. (4.70 x 6.50 x 0.037)  = 11303.5 N

          M = 11303.5 kg

To know more about Archimedean visit:

https://brainly.com/question/1603482

#SPJ4

Recommend frequent hand washing are the treatment method developed after the discovery of germ theory.

Learn more about steps of proper handwashing refer to :

https://brainly.com/question/29628173

#SPJ1

Answer:

The answer seems to be,

A) The ball is accelerated while it is pushed by the student's hand due to an

A) The ball is accelerated while it is pushed by the student's hand due to anunbalanced force.

(The answer might be wrong. )

0.32 m/s²  the acceleration of a 250000 kg jumbo jet just before takeoff when the thrust on the aircraft is 80000 nn.

Acceleration the rate at which the speed and direction of a moving object vary over time. A point or object going straight forward is accelerated when it accelerates or decelerates. Even though the speed remains constant, motion on a circle accelerates because the directions is always shifting. Due to the fact that it includes both magnitude and direction, velocity is a quantity. As the rate at which velocity changes, acceleration is likewise a vector quantity.

The formula may be used to determine an object's acceleration given its mass and the force acting on it.

a= f/m

f is the force

m is the mass

a = 80000 / 250000

a = 0.32 m/s²

To know more about acceleration visit:

https://brainly.com/question/12550364

#SPJ4

The distance over which the force acts on the box, given that 70 N is applied to the 10 Kg box is 3.125 m

We'll begin by obtaining the acceleration of the box. Details below:

Net force = mass × acceleration

40 = 10 × acceleration

Divide both sides by 10

Acceleration = 40 / 10

Acceleration = 4 m/s²

Finally, we shall determine the distance. Details below

v² = u² + 2as

5² = 0² + (2 × 4 × s)

25 = 0 + 8s

25 = 8s

Divide both side by 8

s = 25 / 8

s = 3.125 m

Thus, we can conclude that the distance covered is 3.125 m

Learn more about distance travelled:

https://brainly.com/question/18265275

#SPJ1

Since linear momentum equals m v, it varies at each bounce by the same amount, r = R. For instance, if a ball bounces eighty percent of its height each time, it loses twenty percent of its energy each time.

An object's heat uptake or loss and the consequent temperature variations are related by the description above and the following equation (Q = m•C•T).

We now know that heat can occasionally be acquired or lost without a corresponding change in temperature. When the material is changing states, this is what happens.

The mass and speed of an item moving determine how much kinetic energy it has.

learn more about linear momentum refer

https://brainly.com/question/7538238

#SPJ4

Answer:

C.) The United States would become less dependent on energies that emit greenhouse gases.

Explanation:

If nuclear energy increased, it would occupy a larger piece of the pie chart.  The prompt states that the usage of non-fossil fuel-based forms of energy would remain constant.  This condition means that nuclear energy would decrease the percentage of fossil fuel-based energy used.  Energy production through the use of fossil fuels necessarily produces greenhouse gases such as CO2.  An increase in nuclear energy would mean a corresponding decrease in dependence on greenhouse gas-producing fossil fuels.

The parameter of the dark energy equation of state is viewed as an arbitrary constant with a value falling between the range $w in [-1.5, -0.5]$, the upper and lower bounds of which are determined by recent measurements. We get scale factor approximations with better than 1% accuracy.

Mass of a solid substance per unit volume. The equation for density is d = M/V, where d represents density, M is mass, and V is volume. Density is often measured in grammes per cubic centimetre. Its mass per unit of volume is a measure of a substance's density. Although the sign can also represent the Latin letter D, it is most frequently used to represent density. Mass divided by volume is the formula for density in mathematics: displaystyle rho = frac mV. where V is the volume, is the density, and m is the mass.

How much mass there is in a specific volume or area is determined by its density. The formula for determining a substance's density is to divide its mass by its volume.

To know more about Density visit:

https://brainly.com/question/29775886

#SPJ4

True. The Big Bang Theory is the current scientific explanation for the origin and evolution of the universe. According to this theory, the universe was initially in a state of extremely high density and temperature, and it has been expanding and cooling since its inception.

One reason we cannot directly observe the Big Bang is that the universe's density was so low at that time that there were no solid particles, such as atoms or molecules, that could have formed into stars or galaxies. Instead, the universe was filled with a hot, ionized plasma that was too diffuse to be observed by telescopes. Another reason is that the expansion of the universe has caused the light and other electromagnetic radiation that was emitted during the Big Bang to become redshifted, or stretched out in wavelength, over time. This means that the light from the earliest moments of the universe has shifted into the microwave and radio frequency ranges, which are not visible to the human eye. Therefore, while we can infer some details about the conditions of the early universe based on observations of the cosmic microwave background radiation and the large-scale structure of the universe, we cannot directly observe the Big Bang itself.

To know more about redshift

https://brainly.com/question/13494718

#SPJ4

Newton's third law states that any action will have a(n) equal and opposite reaction.

The force that must be exerted on the master cylinder of the hydraulic lift to support the weight of car is  147.2 N .

The Pascal's Law states that the relation between the pressure , force and area is given as :

Pressure = Force/Area ;

given that the diameter of the master cylinder is = 1.93 cm ;

so radius of master cylinder = 1.93/2 = 0.965 cm = 0.00965 m ;

the diameter of slave cylinder is = 24.9 cm ;

the radius of the slave cylinder = 24.9/2 = 12.45 m = 0.1245 m ;

Area of slave cylinder (A₁)= π(0.1245)² = 0.0486 m²

Area of the master cylinder (A₂) =  π(0.00965)² = 0.000292 m² ;

given mass of the car = 2500 Kg ,

the force exerted will be : F = m*a

F₁ = 2500*9.8 = 24500 N ;

F₁/A₁ = F₂/A₂

So , 24500/0.0486 = F₂/0.000292

F₂ = (24500/0.0486)×0.000292

F₂ = 147.2 N

Therefore , the force exerted on the master cylinder is 147.2 N  .

Learn more about Force here

https://brainly.com/question/14114564

#SPJ4

The height of the cliff, given that her phone landed 20 m away when she accidentally threw her phone with a velocity of 5 m/s is 78.4 m

To determine the height of the cliff, we must first obtain the time taken for her phone to reach the ground. This is obtained as follow:

s = ut

20 = 5 × t

Divide both sides by 5

t = 20 / 5

t = 4 s

Finally, we shall determine the height of the cliff. Details below:

h = ½gt²

h = ½ × 9.8 × 4²

h = 4.9 × 16

h = 78.4 m

Thus, the height of the cliff is 78.4 m

Learn more about height:

https://brainly.com/question/22740770

#SPJ1

When a soap bubble 100 nm thick and illuminated by white light incident perpendicular to its surface, then wavelength, λ is calculated =  5.32 *10^-7 m.

The ratio of the speed of light in a vacuum, c, to the speed of light in a medium, c' is called as index of refraction. One of the consequence of this difference in speed is that when light goes from one medium to another at an angle, then the propagation vector in the new medium has a different angle with respect to normal.

Given, t= 100nm= 100 * 10 ^-9  n= 1.33

ΔФ1 = λ/4

ΔФ2 = 2√2 t λ n/2 λ

=2 t n

=2 * 100 * 10 ^-9 * 1.33

= 2.66 *10^-7

2.66 *10^-7= λ/2

λ=  5.32 *10^-7 m.

To know more about index of refraction, refer

https://brainly.com/question/12469161

#SPJ4

The draw of the earth on the apple and the pull of the apple on the earth are forces operating in pairs (number of pairs, not individual forces).

Since there is no net force acting on the item while it is resting , the downward force (weight) must counterbalance the force acting upward (normal force). Weight travels downhill, therefore it is always negative. For an item to be at rest, all of the forces must be equal to 0.

According to Newton's first rule, in order to have no net force exerted on an object, it must be at rest. Because if there is a total force acting on the object, it will change velocity. It will accelerate.

To know more about Force visit

brainly.com/question/13191643

#SPJ4

Answer:

While on the earth, any object with a mass of 0.77 kg weighs 7.546 newtons (1.698 pounds).

On the moon, the same 0.77-kg object would weigh 1.232 newtons (0.277 pound)

Explanation:

We can determine if a star is moving toward or away from earth by measuring its brightness.

The correct answer would be:

[tex]\fbox{False}[/tex]

All the tools of communication such as the drum, telegraph et cetra were used for emergency communication.

We know that communication has to do with the art of sending and receiving information between two people who may or may not be at the same place. We know that the dissemination of information is a very important aspect of life and we have always tried to invent means of communication especially at times when we have an emergency situation that needs a kind of an immediate remedy.

We can see that all the kinds of communication gadgets that have been show here are all from a period that is far behind the kind of civilization that we have to day and the kind of thge communication gadgets that are quite available to the people that are around today.

However, all the tools shown could be used to send information in times of emergency.

Learn more about communication:https://brainly.com/question/14288895

#SPJ1