Identifying Maller
In your own words, describe how matter is identified.

Answers

Answer 1

Answer:

Matter can be identified through its properties. One clue to helps us identify matter is magnetism. Magnetism is the ability of a material to be attracted by a magnet. Only certain materials are attracted to magnets, like iron, nickel, and cobalt.

Explanation:

we can identify matter by:  physical properties  and

chemical properties


Related Questions

A person holds a 25 kg (250 newton) bag of cement over his head and moves it a distance of 10 m, taking 2 minutes, while another person carries it on a wheelbarrow that same distance, taking 1 minute.Who does more work ? What is the power of each person?

Answers

Explanation:

Assuming the 10 m distance is the vertical displacement, the work done by both people is the same.

Work = force × distance

W = (250 N) (10 m)

W = 2500 J

The power of the first person is:

Power = work / time

P = 2500 J / 120 s

P = 20.83 W

The power of the second person is:

P = 2500 J / 60 s

P = 41.67 W

A hammer is used to hit a nail into a board. Which statement is correct about the forces at play between the nail and the hammer? The nail exerts an equal force on the hammer in the same direction. The nail exerts a much smaller force on the hammer in the opposite direction. The nail exerts an equal force on the hammer in the opposite direction. The nail exerts a much smaller force on the hammer in the same direction.

Answers

Answer:

The nail exerts an equal force on the hammer in the opposite direction.

Explanation:

The Newtons third law states that there is an equal an opposite reaction for every action. When hammer pushes the nail, the nail will push the hammer back in opposite direction. When the hammer hits a nail then nail will exert the equal and opposite force to the hammer. These both objects will exert force on each other in opposite directions.

Hello, I am BrotherEye

Answer:

Answers are

1. "The nail exerts an equal force on the hammer in the opposite direction."

2. "500 N"

3. "The iron piece exerts a force of 1 N on the magnet in the opposite direction."

4. "When mass moves closer to the point of rotation, rotational inertia decreases."

5. "The skater spins slower because his rotational inertia has increased."

Explanation:

Using your own words, tell me
what is the difference between an Pure Substance and a Mixture? Make sure to give me an example of each.

Answers

Answer:

Hey there!

Mixtures are physically combined and can be separated. For example, sand and water is a mixture.

Pure substances are samples of matter with definite, and unchangeable chemical properties. For example, diamond is a pure substance.

Let me know if this helps :)

a pure substance is a substance that has not been mixed with anything, a mixture has been mixed with another substance. an example is

dirt +water=mud iron is an example of a substance

A stone of 1 kg is thrown with a velocity of 40 m/s across the frozen surface of a lake and comes to rest after travelling a distance of 50 m. What is the force of friction between the stone and the ice? *

A)16 N
B)-4 N
C)-16 N

Answers

Answer:

C)-16 N

Explanation:

concepts used

force = mass* acceleration

equation of motion

[tex]v^2 = u^2 + 2as[/tex]

where v is the final velocity

u is the initial velocity

and s is the distance moved

______________________________________________

Given

mass = 1 kg

initial velocity (u) = 40m/s

final velocity (v) = 0 as stones comes to rest

distance moved by stone (s) = 50m

using  [tex]v^2 = u^2 + 2as[/tex]

[tex]0 = 40^2 +2a*50\\=> -1600 = 100a\\=> a = -1600/100 = -16[/tex]

Thus, acceleration is -16 m/s^2

here acceleration is negative as force of friction is opposing the motion.

Force of friction = mass of stone * acceleration of stone

Force of friction = 1*-16 kgm/s^2 = -16N       ( kgm/s^2 = 1 N)

Thus, option c -16N is correct choice.

A machine can never be 100% efficient because some work is always lost due to which factor? friction gravity static input force

Answers

Explanation:

Hi,

The answer is friction.

There is almost no machine which are not affected by friction. It losts some work due to friction while working.

Hope it helps..

Answer:

friction

Explanation:

the other options dont effect efficiency

plz help
I need it fast

Answers

Answer:

perpendicular to

Explanation:

it means perpendicular to .....should u come across something like this / / , this one means parallel to .....

Answer:

perpendicular

Explanation:

Some of the most popular symbols are:

Heart symbol: this represents love, compassion and health.

Dove symbol: this represents peace, love, and calm.

Raven symbol: this represents death and doom.

Tree symbol: this represents growth, nature, stability, and eternal life.

Owl symbol: this represents wisdom and intelligence.

Please answer, it's really urgent A boy performs an experiment to measure the speed of sound. He stands 100 meters away form a large wall and claps his hands to make an echo. He claps again as soon as he was the echo, He does this ten times, each time clapping an soon as he hears the echo. The time between the first clap and the tenth echo a recorded. Why it better to time ten echoes together rather than just one echo?

Answers

Answer:

Explanation:

The speed of sound is very high . It is about 340 m /s . In one echo , it takes approximately

2 x 100 / 340

= .6 sec

In 10 simultaneous echo , it will take 6 s . It is difficult to measure .6 sec but to measure 6 s is easy and it can be made with greater precision , so we can calculate velocity of sound with great precision .

This is the reason why , instead of one echo , 10 echos are made and duration of 10 echo is measured , rather than making one echo and measuring time of one echo .  

Calculate the volume of this regular solid. A cylinder labeled B at the top, 13 centimeters high with a radius of 4 centimeters. What is the volume of the cylinder? Round your answer to the nearest hundredth.

Answers

Answer:

The volume of the cylinder is [tex]653.71\ \text{cm}^3[/tex]

Explanation:

Given that,

The height of the cylinder is 13 cm

Radius of the cylinder is 4 cm

We need to find the volume of the cylinder. The formula that is used to find the volume of a cylinder is given by :

[tex]V=\pi r^2 h\\\\V=\dfrac{22}{7} \times (4)^2 \times 13\\\\V=653.71\ \text{cm}^3[/tex]

So, the volume of the cylinder is [tex]653.71\ \text{cm}^3[/tex]

Answer:

653.45 is the answer

Explanation:

The marginal cost curve
(a) Lies below the ATC curve when the ATC curve slopes upward.
(b) Intersects the AFC and ATC curves at their respective minimum points.
(c) Lies above the AVC curve when the AVC curve slopes downward.
(d) Intersects the AFC and AVC curves at their respective minimum points.
(e) Intersects the AVC and ATC curves at their respective minimum points

Answers

Answer:

c

Explanation:

The marginal cost curve image  has been attached from which we can clearly, indicate that

ATC = average total cost

AFC = average fixed cost

AVC = average variable cost.

From the graph we can indicate that the marginal cost curve

(c) Lies above the AVC curve when the AVC curve slopes downward.

What happens when a sound wave passes from oil into air? A. the sound wave slows down and bounces back B. the sound wave slows down and bends C. the sound wave speeds up and bounces back D. the sound wave speeds up and bends

Answers

Oil is optically denser than water. When sound/light goes from optically denser medium to optically rarer medium, their velocity increase and they moves away for normal.

Appropriate Answer:

The sound wave speeds up and bends

[tex] \Large{ \underline{ \boxed{ \pink{ \bf{Option \: (D)}}}}}[/tex]

As, In optics we learnt that light undergoes refraction when travels from medium of different densities. Similarly, Sound also follows the law of refraction.

It is due to the change of speed of water in different mediums, This makes it speed up or down depending upon the medium and their densities.

━━━━━━━━━━━━━━━━━━━━

Answer:

the sound wave slows down and bends

Explanation:

a p e x

what is the symbol of mecury

Answers

If you are talking about mecury as in a chemical element than it is: Hg

If you are talking about the planet Mercury than: The symbol for Mercury represents the head and winged cap of Mercury, god of commerce and communication, surmounting his caduceus (staff). The symbol for Venus is designated as the female symbol, thought to be the stylized representation of the hand mirror of this goddess of love.

Answer:

The symbol of mercury is....

Hydrargyrum ( Hg )

Hope this helps......

Pls mark my ans as brainliest

Pls help A car starts from rest and gains a velocity of 20m/s in 10 seconds calculate its acceleration and the distance covered by it in this time

Answers

Answer:

[tex] \boxed{\sf Acceleration \ (a) = 2 \ m/s^{2}} [/tex]

[tex] \boxed{\sf Distance \ covered \ (s) = 100 \ m} [/tex]

Given:

Initial velocity (u) = 0 m/s

Final velocity (v) = 20 m/s

Time taken (t) = 10 sec

To Find:

(i) Acceleration (a)

(ii) Distance covered (s)

Explanation:

[tex]\sf (i) \ From \ 1^{st} \ equation \ of \ motion:[/tex]

[tex] \sf \implies v = u + at[/tex]

[tex] \sf \implies 20 = 0 + a(10)[/tex]

[tex] \sf \implies 10a = 20[/tex]

[tex] \sf \implies \frac{10a}{10} = \frac{20}{10} [/tex]

[tex] \sf \implies a = 2 \: m/ {s}^{2} [/tex]

[tex]\sf (ii) \ From \ 2^{nd} \ equation \ of \ motion:[/tex]

[tex] \sf \implies s = ut + \frac{1}{2} a {t}^{2} [/tex]

[tex]\sf \implies s = (0)(10) + \frac{1}{2} \times 2 \times {(10)}^{2} [/tex]

[tex]\sf \implies s = \frac{1}{ \cancel{2}} \times \cancel{2} \times {(10)}^{2} [/tex]

[tex]\sf \implies s = {10}^{2} [/tex]

[tex]\sf \implies s = 100 \: m[/tex]

If an object floats, the volume of the displaced water is equal to the volume of the whole object. True or false?

Answers

Answer:

True

Explanation:

This is in fact what the Archimedes principle states, and what he used in the famous anecdote about finding if  the crown of the King was really made of gold.

A student measures the depth of a water well with an adjustable frequency audio oscillator. 2 successive resonant frequencies are heard at 40Hz and 50Hz. What is the depth of the well?

Answers

Answer:

17.15 m

Explanation:

Assuming the well is empty (full of air instead of water), the speed of sound is v = 343 m/s.

The water well acts as a pipe closed at one end.  Therefore, the depth of the water well must be an odd multiple of a quarter of the resonant wavelength.

L = (2n − 1) λ/4, n = 1, 2, 3, etc.

v = λf, so λ = v/f.  Substituting:

L = (2n − 1) v/(4f)

Solving for frequency:

f = (2n − 1) v/(4L)

The difference between two successive resonant frequencies is therefore:

Δf = (2(n+1) − 1) v/(4L) − (2n − 1) v/(4L)

Δf = (2n + 1) v/(4L) − (2n − 1) v/(4L)

Δf = 2 v/(4L)

Δf = v/(2L)

Plugging in values:

50 Hz − 40 Hz = 343 m/s / (2L)

2L = 34.3 m

L = 17.15 m

Un pez llamado PARGO ROJO vive a grandes profundidades. Si se pesca, al salir a la superficie puede tomar el aspecto de la foto porque su vejiga natatoria aumenta de volumen al disminuir la presión. La ley que lo explica es...

Answers

Answer:

Hay diversas leyes que podemos usar acá.

Acá sabemos que la vejiga aumenta su tamaño al reducir la presión, esto tiene sentido, pues al haber menos presión, hay menos fuerza que comprime la vejiga, lo que le permite aumentar su volumen.

Acá tenemos una relación inversa de la forma: V = K/P

Una relación inversa donde la presión esta en el denominador y K es un termino que no depende ni del volumen ni de la presión.

Entonces, a medida que aumenta P, el denominador aumenta, por lo que el valor del volumen decrece.

Un ejemplo de una ecuación similar es la del gas ideal, por ejemplo, para un gas ideal dentro de un globo de volumen V para una dada presión P:

V = nRT/P

donde n es el numero de moles, R es la constante termodinámica y T es la temperatura, acá podemos ver que esta ecuación tiene la misma forma fundamental que la escrita arriba.

1. A physical quantity P is related to four observables a, b and c as follows: P= (a3b 2 /c4 ) The percentage errors of measurements in a, b and c are 1%, 4% and 2% respectively. What is the percentage error in quantity P?

Answers

Answer:

The percentage error in quantity P is 19%.

Explanation:

It is given that,

A physical quantity P is related to four observables a, b and c as follows:

[tex]P=\dfrac{a^3b^2}{c^4}[/tex]

The percentage errors of measurements in a, b and c are 1%, 4% and 2% respectively.

We need to find the percentage error in quantity P. It is given by :

[tex]\dfrac{\Delta P}{P}\times 100=(3\times \dfrac{\Delta a}{a}+2\times \dfrac{\Delta b}{b}+4\times \dfrac{\Delta c}{c})\\\\=3\times 1+2\times 4+4\times 2\\\\\dfrac{\Delta P}{P}\times 100=19\%[/tex]

So, the percentage error in quantity P is 19%.

Which example best describes a restoring force?
any force that is applied to a spring to change its length
the force applied to stretch a spring and increase its length
the force applied to restore a spring to its original length
the force applied to compress a spring and shorten its length

Answers

Answer:

the force applied to restore a spring to its original length

Explanation:

A butterfly is flying around and its velocity(v) as a function of time(t) is given in the graph below where rightwards is the positive velocity direction. What is the butterfly's displacement x from t=2 to 4s? Answer with two significant digits.

Answers

Answer: 19 meters.

Explanation:

We want to find the total displacement between t = 2s and t = 4s.

To do it, we can integrate our function, first write our velocity equation.

for t ≤ 3s, we have a linear equation, let's write it:

A linear relationship can be written as:

y = a*t + b

where a is the slope and b is the y-axis intercept.

For a line that passes through the points (x1, y1) and (x2, y2), the slope can be written as:

a = (y2 - y1)/(x2 - x1).

Now we can see that our line passes through the points (1, 0) and (0, -2)

then the slope is:

a = (0 -(-2)/(1 - 0) = 2/1 = 2

and knowing that when t = 0s, v(0s) = -2m/s, then our equation is:

v(t) = (2m/s^2)*t - 2m/s for t ≤ 3s

now, for t ≥3s the equation is constant, v(t) = 4m/s.

then we have

v(t) = (2m/s^2)*t - 2m/s -------if t ≤ 3s

v(t) = 4m/s ----- if t ≥ 3s

Now we integrate over time to get the position:

for t ≤ 3s we have:

p(t) = (1/2)*(2m/s^2)*t^2 - 2m/s*t + C

where C is a constant of integration, as we are calculating the displacement  this constant actually does not matter, so we can use C = 0m

p(t) = (1m/s^2)*t^2 - 2m/s*t  for t ≤ 3s

and p(3s) =  (1m/s^2)*3s^2 - 2m/s*3s = 9m - 6m = 3m is the initial position of the other part of the function.

for t ≥ 3s we have:

p(t) = 4m/s*t + p(3s) = 4m/s*t + 3m

then the position equation is:

p(t) = (1m/s^2)*t^2 - 2m/s*t  ---- t ≤ 3s

p(t) = 4m/s*t + 3m --- if t ≥ 3s

Now the displacement will be:

p(4s) - p(2s) where for each time, you need to use the correct function:

p(4s) = 4m/s*4s + 3m = 16m + 3m = 19m

p(2s) =  (1m/s^2)*2s^2 - 2m/s*2s = 4m - 4m = 0m

p(4s) - p(2s) = 19m - 0m = 19m

The butterfly displacement x from t=2 to 4s is 19 meters.

What is displacement?

The spacing between two specified points is represented by the one-dimensional quantity of displacement (symbolised as d or s), commonly known as length or distance.

The total displacement between t = 2s and t = 4s.

Integrate our function, the velocity equation.

for t ≤ 3s, we have a linear equation, let's write it:

A linear relationship can be written as:

y = a x t + b

where a is the slope and b is the y-axis intercept.

For a line that passes through the points (x1, y1) and (x2, y2), the slope can be written as:

a = (y2 - y1)/(x2 - x1).

The line passes through the points (1, 0) and (0, -2)

The slope is:

a = (0 -(-2)/(1 - 0) = 2/1 = 2

When t = 0s, v(0s) = -2m/s, then our equation is:

v(t) = (2m/s²) x t - 2m/s for t ≤ 3s

now, for t ≥3s the equation is constant, v(t) = 4m/s.

v(t) = (2m/s²) x t - 2m/s -------if t ≤ 3s

v(t) = 4m/s ----- if t ≥ 3s

Now we integrate over time to get the position:

for t ≤ 3s we have:

p(t) = (1/2) x (2m/s²) x t^2 - 2m/s x t + C

where C is a constant of integration, to calculate the displacement  this constant actually does not matter,

p(t) = (1m/s²)*t^2 - 2m/s x t  for t ≤ 3s

and p(3s) =  (1m/s^2) x 3s² - 2m/s x 3s = 9m - 6m = 3m is the initial position of the other part of the function.

for t ≥ 3s we have:

p(t) = 4m/s x t + p(3s) = 4m/s x t + 3m

then the position equation is:

p(t) = (1m/s^2) x t² - 2m/s x t  ---- t ≤ 3s

p(t) = 4m/s x t + 3m --- if t ≥ 3s

Now the displacement will be:

p(4s) - p(2s) where for each time, you need to use the correct function:

p(4s) = 4m/s x 4s + 3m = 16m + 3m = 19m

p(2s) =  (1m/s²) x 2s²- 2m/s x 2s = 4m - 4m = 0m

p(4s) - p(2s) = 19m - 0m = 19m

Thus, the displacement is 19 m.

To learn more about displacement, refer to the link:
https://brainly.com/question/11934397

#SPJ2

A car accelerates at a rate of 3 m/s^2. If its original speed is 8 m/s, how many seconds will it take the car to reach a final speed of 25 m/s?

Answers

Answer:

[tex]\Large \boxed{\mathrm{5.67 \ seconds }}[/tex]

Explanation:

[tex]\displaystyle \mathrm{acceleration \ = \ \frac{final \ velocity - initial \ velocity }{elapsed \ time}}[/tex]

[tex]\displaystyle A \ = \ \frac{V_f - V_i }{t}[/tex]

[tex]\displaystyle 3 \ = \ \frac{25 - 8 }{t}[/tex]

[tex]\displaystyle 3 \ = \ \frac{17 }{t}[/tex]

[tex]\displaystyle t \ = \ \frac{17 }{3} \approx 5.67[/tex]

A container contains 200g of water at initial temperature of 30°C. An iron nail of mass 200g at temperature of 50°C is immersed in the water. What is the final water temperature? State the assumptions you need to make in your calculations.
[Given the value of specific heat capacity of water is 4200 J kg^-1 °C^-1 and that of iron is
450 J kg^-1 °C^-1]​

Answers

Answer:

The final temperature is 31.94°

Explanation:

The mass of the water in the container m₁ = 200 g = 0.2 kg

The initial temperature of the water,  T₁₁ = 30°C

The mass of the iron, m₂ = 200 g = 0.2 kg

The temperature of the iron T₂₁= 50°C is immersed in the water,

The specific heat capacity of the water, c₁ = 4200 J/(kg·°C)

The specific heat capacity of the iron, c₂ = 450 J/(kg·°C)

Heat capacity relation is given by the formula;

Heat capacity Q = Mass, m × Specific heat capacity, c × Temperature change, (T₂ - T₁)

Given that energy can neither be created nor destroyed, and with the assumption that all the heat lost by the nail is gained by the water we have;

Heat lost by iron nail = Heat gained by the  water

m₁ × c₁ × (T₂ - T₁₁) = m₂ × c₂ × (T₂₁ - T₂)

Where, T₂ is the final temperature

0.2 kg × 4200 J/(kg·°C) × (T₂ - 30) = 0.2 kg × 450 J/(kg·°C) × (50° - T₂)

840·T₂ - 25200 = 4500 - 90·T₂

4500 + 25200 = 840·T₂ + 90·T₂

29700 = 930·T₂

T₂ = 29700/930 = 31.94°.

The final temperature = 31.94°.

A box with mass of 2 kg is pushed directly horizontally over a horizontal surface (with friction) at a constant speed of 10 m/s. The force of the push is 60 N. How much thermal energy is generated pushing the box a distance of 15 m

Answers

Answer:

E= 600 W

Explanation:

Given that

m = 2 kg

Speed ,  v= 10 m/s

Force , F= 60 N

Given that box is moving with constant velocity, it means that friction force will be 60 N.

f = 60 N

Therefore total energy generated

E= f x v

E= 60 x 10 = 600 W

E= 600 W

Thus the answer will be 600 W.

A car travels from point A to B in 3 hours and returns back to point A in 5 hours. Points A and B are 150 miles apart along a straight highway. Which of the following statements most accurately describes the motion of the car? Choose 1 answer:(Choice A) A The average velocity is 40 miles per hour. (Choice B) B The total displacement of the trip is 300 miles. (Choice C) C The average speed is 37.5 miles per hour. (Choice D) D The car travels at 50 mph for the first half and 30 mph for the second half.

Answers

Answer: D

Explanation:

Given that a car travels from point A to B in 3 hours and returns back to point A in 5 hours. Points A and B are 150 miles apart along a straight highway.

From point A to B

The speed = distance / time

Where

Distance = 150 mile

Time = 3 hours

Substitute the values into the formula

Speed = 150/3 = 50 mile/ hours

From Point B to Point A

Distance = 150 miles

Time = 5 hours

Where speed = distance/ time

substitute all the parameters into the formula

Speed = 150/5 = 30 mph

Therefore, The car travels at 50 mph for the first half and 30 mph for the second half.

The correct answer is option D


A wave has a frequency of 5 Hz and a wavelength of 0.5 m, what is the speed of this wave?

Answers

Answer:

2.5 m/s

Explanation:

The speed of a wave can be found using the following formula.

v= λ * f

where  λ is the wavelength in meters (m) and f is the frequency of the wave in Hertz (Hz).

We know the wavelength is 0.5 m and the frequency of the wave is 5 Hz.

Therefore,

λ= 0.5 m

f = 5 Hz

v= 0.5 * 5

Multiply 0.5 by 5, or divide 5 by 2.

0.5 * 5= 2.5     or      5/2=2.5

v= 2.5

Add appropriate units. The units for wave speed are m/s (meters per second).

v= 2.5 m/s

The speed of the wave is 2.5 meters per second.

Open the attached image to see the question.

Answers

Answer:

option A

Explanation:

STOVE RADIATE ENERGY

an astronaut takes a tuning fork with her to the moon she strikes it inside the cabin the cabin is normally filled with air so the humans inside the spacecraft are comfortable she also strikes it outside the spacecraft when she gets down on the surface of the moon which of the following is true about the tuning fork?
A: it does not vibrate inside the spacecraft
B: id does not vibrate on moon surface
C: it vibrations are not transmitted inside the spacecraft
D:it's vibrations are not transmitted to the moon's atmosphere

Answers

Answer:

The correct option is;

D: Its vibrations are not transmitted to the moon's atmosphere

Explanation:

A tuning fork is used to produce sound by vibration  such that the tune produced is pure

The tune, sound, produced by the tuning fork is transmitted as sound wave through the air by means of the gases of the air as a transmission medium so people at a distance that have air around them can hear the tuning fork sound

On the Moon's surface, the atmosphere is very and it is referred to technically as an exosphere, so the sound of the tuning fork has no medium through which to transmit and therefore, it is not transmitted on the Moon's atmosphere.

A fire cracker is fired and it rises to a height of 1000 m. Find the velocity by which it was
released and the time taken by it to reach the highest point (take a = 10 m/s²).​

Answers

Answer:

Explanation:it is too easy

In series combination of resistors, the total electric current is equal to the current flowing through each resistor.

A. False B. True C.The statement above lacks information

WILL GIVE BRAINLIEST! :)

Answers

Answer:

The answer is B, true.

Because same current flows through each resistors in Series.

Plz Mark as Brainlist

And follow me.

[tex] \LARGE{ \underline{ \tt{ \pink{True \: or \: False}}}}[/tex]

The above statement is true.

❍ In series combination of resistors, the total electric current is equal to the current flowing through each resistor..

Explanation:-In series combination, the resistors are connected end to end.There is no branch of extra wire with resistor, Hence Current through the entire circuit remains constant.The Potential difference between the resistors changes due to variation in end points. The equivalent resistance of the total circuit is the sum of the resistors connected end to end.The total or equivalent resistance is always greater than other individual resistance.

━━━━━━━━━━━━━━━━━━━━

Identify the wood turning equipment and what it does.
А
is used to turn wood. It rotates and carves wood to produce a
form.​

Answers

Answer:

lathe

perfectly symmetrical

Answer: A lathe is used to turn wood . It rotates and carves wood to produce a perfectly symmetrical form .

First one is lathe .

Second one is perfectly symmetrical .

Explanation: I just took the test on Plato and had 100%

Dr. Bishop wants to study how small children respond to scary stimuli. She will explain the procedure to parents and ask them to sign a permission form. She will have 3-5 year old kids individually come into her lab
Each child will be given a teddy bear to cuddle with. She will then stand a couple of feet behind the child as he or she plays and make a very loud scary sound. She will observe and measure the child's responses. The
child will come back in a few days and be given the teddy bear again, she will measure any reactions the child has to the bear.
What might an ethics review committee decide about the proposal?
The proposal is approved, as it meets the ethical guidelines defined by the APA
O The proposal is approved, because there is no deception
The proposal is denied, because participants wil ikely suffer psychological harm.
O The proposal is denied, because participants are not allowed to leave the study
The proposal is denied, because it does not meet confidentiality standards

Answers

Answer:

The correct option is;

The proposal is denied, because participants will likely suffer psychological harm

Explanation:

Among the recommendations in the report on ethical research with children, it is suggested that the following should be observed by researchers;

1) Seeking consent should be a continuous process

2) Contemplate payment forms other than money to allow more discretion on child safety

3) Have two way communication with the child

4) Ask for assent of the child participating in the research

The above APA suggestions where not met by the researcher in the study.

Answer:

The proposal is denied, because participants will likely suffer psychological harm.

Explanation:

This proposal would cause psychological harm to its participents.

I also took the test and that was the correct answer.

a bird statue with a mass 0.2 kg hangs from a rubber band with spring constant 30 N/m.How much is the rubber band stretched when the statue hangs motionless

Answers

Answer:

Distance : 0.06533 meters or 65.33 mm

Explanation:

To solve this problem we can make the forces equal when the system is at equilibrium.

mass [tex]*[/tex] gravity ( constant ) = spring constant

where l = the length at which the rubber band is stretched

0.2 kg [tex]*[/tex] 9.8 m / s² = 30 N/m

1.96 kg [tex]*[/tex] m / s² = 30 N/m

l = 1.96 kg [tex]*[/tex] m / s² / 30 N/m = 0.06533 meters / 65.33 mm

The rubber band is stretched a distance of 0.06533 meters, or 65.33 mm.

Answer:

0.065

Explanation:

Apex i just got it right

Other Questions
Can abnormality exist outside of a cultural context E Corporation produces a single product. The cost of producing and selling a single unit of this product at the company's normal activity level of 44,000 units per month is as follows: Per Unit Direct materials $44.60Direct labor $8.50 Variable manufacturing overhead $1.50 Fixed manufacturing overhead $18.10 Variable selling & administrative expense $2.60Fixed selling & administrative expense $12.00The normal selling price of the product is $94.10 per unit. An order has been received from an overseas customer for 2,400 units to be delivered this month at a special discounted price. This order would not change the total amount of the company's fixed costs. The variable selling and administrative expense would be $1.60 less per unit on this order than on normal sales.Suppose there is ample idle capacity to produce the units required by the overseas customer and the special discounted price on the special order is $80.40 per unit. The monthly financial advantage (disadvantage) for the company as a result of accepting this special order should be:_______ Pace Company purchased 20,000 of the 25,000 shares of Saddler Corporation for $533,300. On January 3, 2014, the acquisition date, Saddler Corporations capital stock and retained earnings account balances were $508,500 and $101,800, respectivelyThe following values were determined for Saddler Corporation on the date of purchase:Book Value Fair ValueInventory $50,600 $68,800Other current assets 197,800 197,800Marketable securities 100,100 125,300Plant and equipment 305,900 330,200Required:Prepare a Computation and Allocation Schedule for the difference between book value and the value implied by the purchase price in the consolidated statements workpaper. A solenoid inductor has an emf of 0.80 V when the current through it changes at the rate 10.0 A/s. A steady current of 0.20 A produces a flux of 8.0 Wb per turn.Required:How many turns does the inductor have? A line plot has a range of 4, from 1 to 5, with 5 modes. How would you describe the graph? The graph has an outlier. The data is clustered around 3. Each column will be the same height. There is not enough information.will give brainliest How do cultures become different from one another? Your job is to submit a risk diagnosis to the Centers for Medicare & Medicaid Services (CMS) for the purpose of payment. As part of this job, you use a process to verify the data is accurate. Your immediate supervisor tells you to ignore the Sponsor's process and to adjust or add risk diagnosis codes for certain individuals. What should you do? A certain pole has a cylinder-like shape, where the base's radius is 10 centimeters and the height is 2 meters. What calculation will give us the estimated surface area of the pole in square centimeters? If two 4-sided dice were rolled, whatwould be the probability of getting double2s? Write your answer as a fraction. Please answer ASAP PLEASE! Northwest Fur Co. started 2021 with $105,000 of merchandise inventory on hand. During 2021, $510,000 in merchandise was purchased on account with credit terms of 3/15, n/45. All discounts were taken. Purchases were all made f.o.b. shipping point. Northwest paid freight charges of $8,900. Merchandise with an invoice amount of $3,700 was returned for credit. Cost of goods sold for the year was $362,000. Northwest uses a perpetual inventory system. What is ending inventory assuming Northwest uses the gross method to record purchases A basketball player scored 33 points during a game by shooting 1-point free throws, 2-point field goals, and 3-point field goals. The player scored 17 times. She scored 3 more 2-point field goals than 1-point free throws. The system of equations below represents the situation, where x is the number of 1-point free throws, y is the number of 2-point field goals, and z is the number of 3-point field goals. x + y + z = 17 x + 2y + 3z = 33 y x = 3 Water flows at speed v in a pipe of radius R. At what speed does the water flow through a constriction in which the radius of the pipe is R/3 Coastal Shores Inc. (CSI) was completely destroyed by Hurricane Fred on August 5, 2021. At January 1, CSI reported an inventory of $153,000. Sales from January 1, 2021, to August 5, 2021, totaled $432,000 and purchases totaled $175,500 during that time. CSI consistently marks up its products 60% over cost to arrive at a selling price. The estimated inventory loss due to Hurricane Fred would be: help! ill give brainliest What concept or principle requires layered, complementary controls sufficient to detect and deter infiltration and exploitation of an organization, its information systems, and its facilities? True or False: Within the body, all atoms combine to form molecules. If false, why? 40 POINTS!!!!ANSWER ASAP!!!What is the value of y?O 3 sqrt 3 unitsO 6 sqrt 3 unitsO 9 sqrt 3 unitsO 12 sqrt 3 units Where does that air go as a result? If m(2x3)+n(x+1)=5x for all real numbers x, where m and n are constants, what is the value of m?