A solenoid inductor has an emf of 0.80 V when the current through it changes at the rate 10.0 A/s. A steady current of 0.20 A produces a flux of 8.0 μWb per turn.

Required:
How many turns does the inductor have?

Answers

Answer 1

Answer:

The number of turns of the inductor is 2000 turns.

Explanation:

Given;

emf of the inductor, E = 0.8 V

the rate of change of current with time, dI/dt = 10 A/s

steady current in the solenoid, I = 0.2 A

flux per turn, Ф = 8.0 μWb per

Determine the inductance of the solenoid, L

E = L(dI/dt)

L = E / (dI/dt)

L = 0.8 / (10)

L = 0.08 H

The inductance of the solenoid is given by;

[tex]L = \frac{\mu_o N^2 A}{l}[/tex]

Also, the magnetic field of the solenoid is given by;

[tex]B = \frac{\mu_o NI}{l}[/tex]

I is 0.2 A

[tex]B = \frac{\mu_oN(0.2)}{l} = \frac{0.2\mu_o N}{l}[/tex]

[tex]\frac{B}{0.2 } = \frac{\mu_o N}{l}[/tex]

[tex]L = \frac{\mu_o N^2 A}{l} \\\\L = \frac{\mu_o N }{l} (NA)\\\\L = \frac{B}{0.2} (NA)\\\\L = \frac{BA}{0.2} (N)[/tex]

But Ф = BA

[tex]L = \frac{\phi N}{0.2} \\\\\phi N = 0.2 L\\\\N = \frac{0.2 L}{\phi} \\\\N = \frac{0.2 *0.08}{8*10^{-6}}\\\\N = 2000 \ turns[/tex]

Therefore, the number of turns of the inductor is 2000 turns.

Answer 2

This question involves the concepts of magnetic flux, magnetic field, and inductance.

The inductor has "2000" turns.

The magnetic field due to an inductor coil is given as follows:

[tex]B=\frac{\mu_o NI}{L}\\\\[/tex]

where,

B = magnetic field

μ₀ = permeability of free space \

N = No. of turns

I = current = 0.2 A

L = length of inductor

Therefore,

[tex]\frac{\mu_oN}{L}=\frac{B}{0.2\ A}---------- eqn(1)[/tex]

Now, the inductance of a solenoid is given by the following formula:

[tex]E = L\frac{dI}{dt}\\\\L = \frac{E}{\frac{dI}{dt}}[/tex]

The inductance of solenoid can also be given using the following formula:

[tex]L = \frac{\mu_o N^2A}{L}[/tex]

comparing both the formulae, we get:

[tex]\frac{E}{\frac{dI}{dt}}= \frac{\mu_oN^2A}{L}\\\\E=\frac{dI}{dt}\frac{\mu_oN}{l}(NA)\\\\using\ eqn (1):\\\\E=\frac{dI}{dt}\frac{B}{0.2}(NA)\\\\[/tex]

where,

BA = magnetic flux = [tex]\phi[/tex] = 8 μWb/turn = 8 x 10⁻⁶ Wb/turn

N = No. of turns = ?

E = E.M.F = 0.8 volts

[tex]\frac{dI}{dt}[/tex] = rate of change in current = 10 A/s

Therefore,

[tex]0.8=(10)\frac{8\ x\ 10^{-6}}{0.2}N\\\\N=\frac{(0.8)(0.2)}{8\ x\ 10^{-5}}[/tex]

N = 2000 turns

Learn more about magnetic flux here:

brainly.com/question/24615998?referrer=searchResults

The attached picture shows the magnetic flux.

A Solenoid Inductor Has An Emf Of 0.80 V When The Current Through It Changes At The Rate 10.0 A/s. A

Related Questions

Which statement about friction is true? (1 point)
o
Static friction and kinetic friction in a system always act in opposite directions of each other and in the same direction as the
applied force
Static friction and kinetic friction in a system always act in the same direction as each other and in the opposite direction of the
applied force
Static friction and kinetic friction in a system always act in opposite directions of each other and in the opposite direction of the
applied force
O
Static friction and kinetic friction in a system always act in the same direction as each other and in the same direction as the
applied force.

Answers

Answer:static friction and kinetic friction in a system always act in the same direction as each other and n the opposite direction of the applie force . Is the correct answer

Explanation:

Static friction and kinetic friction in a system always act in the same direction as each other and in the opposite direction of the applied force. The correct option is B.

What is friction?

Friction is the force that prevents one hard material from scooting or rolling over the other.

Frictional forces, such as the locomotion required to walk without dropping, are advantageous, but they also create a significant amount of resistance to motion.

We can control cars because of friction between the tires and the road: more precisely, because there are three types of friction: rolling friction, starting friction, and sliding friction.

Friction reduces the speed of moving objects and can even stop them from moving. The friction between the objects generates heat. As a result, energy is wasted in the machines. Friction will cause wear and tear on the machine parts.

In a system, static and kinetic friction always act in the same direction and in the opposite direction of the applied force.

Thus, the correct option is B.

For more details regarding friction, visit:

https://brainly.com/question/28356847

#SPJ2

For an object to move, a(n) _______ force must be applied. Question 1 options: Balanced Unbalanced

Answers

Answer:

Unbalenced

Explanation:

when balenced forces are applied to an object there is no motion. When you apply unbalenced force the object you are applying the force to will move in the opposite direction of the force.

Answer:

im pretty sure it unbalenced

Explanation:

i just am

An electrostatic paint sprayer contains a metal sphere at an electric potential of 25.0 kV with respect to an electrically grounded object. Positively charged paint droplets are repelled away from the paint sprayer's positively charged sphere and towards the grounded object. What charge must a 0.168-mg drop of paint have so that it will arrive at the object with a speed of 18.8 m/s

Answers

Answer:

The charge is  [tex]Q = 2.177 *10^{-9} \ C[/tex]

Explanation:

From the question we are told that

     The electric potential is  [tex]V = 25.0 \ kV = 25.0 *10^{3}\ V[/tex]

     The  mass of the drop is  [tex]m = 0.168 \ m g = 0.168 *10^{-3} \ g = 0.168 *10^{-6}\ kg[/tex]

      The  speed is  [tex]v = 18.8 \ m/s[/tex]

Generally the charge on the paint drop due to the electric potential which will give it the speed stated in the question  is mathematically represented as

       [tex]Q = \frac{m v^2 }{ 2 * V }[/tex]

Substituting values

      [tex]Q = \frac{0.168 *10^{-6} (18)^2 }{ 2 * 25*10^3 }[/tex]

       [tex]Q = 2.177 *10^{-9} \ C[/tex]

A brick is resting on a smooth wooden board that is at a 30° angle. What is one way to overcome the static friction that is holding the brick in place?Please help i will give brainliest!!!! lower the board so it's level with the ground ____ roughen up the texture of the wooden board ___ raise the board to a higher angle ____ press down on the brick in a direction that is perpendicular to the board _____

Answers

Answer:

to overcome the out of friction we must increase the angle of the plane

Explanation:

To answer this exercise, let's propose the solution of the problem, write Newton's second law. We define a coordinate system where the x axis is parallel to the plane and the other axis is perpendicular to the plane.

X axis

       fr - Wₓ = m    a                      (1)

Y axis  

       N- [tex]W_{y}[/tex] = 0

       N = W_{y}

let's use trigonometry to find the components of the weight

        sin θ = Wₓ / W

        cos θ = W_{y} / W

        Wₓ = W sin θ

        W_{y} = W cos θ

the friction force has the formula

         fr = μ N

         fr = μ Wy

         fr = μ mg cos θ

from equation 1

at the point where the force equals the maximum friction force

in this case the block is still still so a = 0

           F = fr

           F = (μ  mg) cos θ

We can see that the quantities in parentheses with constants, so as the angle increases, the applied force must be less.

This is the force that balances the friction force, any force slightly greater than F initiates the movement.

Consequently, to overcome the out of friction we must increase the angle of the plane

the correct answer is to increase the angle of the plane

g When a high-energy proton or pion traveling near the speed of light collides with a nucleus, it may travel 3.2 10-15 m before interacting. From this information, find the time interval required for the strong interaction to occur.

Answers

Answer:

Time, [tex]t=1.07\times 10^{-23}\ s[/tex]

Explanation:

Given that,

When a high-energy proton or pion traveling near the speed of light collides with a nucleus, it may travel [tex]3.2\times 10^{-15}\ m[/tex] before interacting.

Let t is the time interval required for the strong interaction to occur. It will move with the speed of light. So,

[tex]t=\dfrac{d}{c}\\\\t=\dfrac{3.2\times 10^{-15}}{3\times 10^8}\\\\t=1.07\times 10^{-23}\ s[/tex]

So, the time interval is [tex]1.07\times 10^{-23}\ s[/tex]

Calculate the focal length (in m) of the mirror formed by the shiny bottom of a spoon that has a 3.40 cm radius of curvature. m (b) What is its power in diopters? D

Answers

Answer:

The power of the mirror in diopters is 58.8 D

Explanation:

Given;

radius of curvature of the spoon, R = 3.4 cm = 0.034 m

The focal length of a mirror is given by;

[tex]f = \frac{R}{2} \\\\f = \frac{0.034}{2} \\\\f = 0.017 \ m[/tex]

The focal length of the mirror is 0.017 m

(b) The power of the mirror is given by;

[tex]P = \frac{1}{f}[/tex]

where;

P is the power of the mirror

f is the focal length

[tex]P = \frac{1}{f}\\\\P= \frac{1}{0.017}\\\\P = 58.8 \ D[/tex]

Thus, the power of the mirror in diopters is 58.8 D

An object is inside a room that has a constant temperature of 289 K. Via radiation, the object emits three times as much power as it absorbs from the room. What is the temperature (in kelvins) of the object

Answers

Answer:

T_object = 380.35 K

Explanation:

From Stefan–Boltzmann law, the power output is given by the formula:

P = σAT⁴

where;

σ is Stefan-Boltzmann constant

A is area of the radiating surface.

T is temperature of the body

Now, we are told that the power the object emitted is 3 times the power absorbed from the room.

Thus, we have;

P_e = 3P_a

Where P_e is power emitted and P_a is power absorbed.

So, we have;

σA(T_object)⁴ = 3σA (T_room)⁴

σA will cancel out to give;

(T_object)⁴ = 3(T_room)⁴

We are given T_room = 289 K

Thus;

(T_object)⁴ = 3 × 289⁴

(T_object) = ∜(3 × 289⁴)

T_object = 380.35 K

The positron has the same mass as an electron, with an electric charge of +e. A positron follows a uniform circular motion of radius 5.03 mm due to the force of a uniform magnetic field of 0.85 T. How many complete revolutions does the positron perform If it spends 2.30 s inside the field? (electron mass = 9.11 x 10-31 kg, electron charge = -1.6 x 10-19 C)

Answers

Answer:

5.465 × 10^10 revolutions

Explanation:

Formula for Magnetic Field = m. v/ q . r

M = mass of electron = mass of positron = 9.11 x 10^-31 kg,

radius of the positron = 5.03 mm

We convert to meters.

1000mm = 1m

5.03mm = xm

Cross multiply

x = 5.03/1000mm

x = 0.00503m

q = Electric charge = -1.6 x 10^-19 C

Magnetic field (B) = 0.85 T

Speed of the positron is unknown

0.85 = 9.11 x 10^-31 kg × v/ -1.6 x 10^-19 C × 0.00503

0.85 × 1.6 x 10^-19 C × 0.00503 = 9.11 x 10^-31 kg × v

v = 0.85 × -1.6 x 10^-19 C × 0.00503/9.11 x 10^-31 kg

v = 6.8408 ×10-22/ 9.11 x 10^-31 kg

v = 750911086.72m/s

Formula for complete revolutions =

Speed × time / Circumference

Time = 2.30s

Circumference of the circular path = 2πr

r =0.00503

Circumference = 2 × π × 0.00503

= 0.0316044221

Revolution = 750911086.72 × 2.30/0.0316044221

= 1727095499.5/0.0316044221

= 546541562294 revolutions

Approximately = 5.465 × 10^10 revolutions

Consult Interactive Solution 27.18 to review a model for solving this problem. A film of oil lies on wet pavement. The refractive index of the oil exceeds that of the water. The film has the minimum nonzero thickness such that it appears dark due to destructive interference when viewed in visible light with wavelength 653 nm in vacuum. Assuming that the visible spectrum extends from 380 to 750 nm, what is the longest visible wavelength (in vacuum) for which the film will appear bright due to constructive interference

Answers

Answer:

Explanation:

In the given case for destructive interference , the condition is,

path difference = (2n+1)λ /2  where n is an integer and λ is wavelength

2 μ d = (2n+1)λ /2

Putting λ = 653 nm

for minimum thickness n = 0

2 μ d = 653 / 2 nm

= 326.5 nm

For constructive interference the condition is

2 μ d = n λ₁

326.5 nm = n λ₁

λ₁ = 326.5 / n  

For n = 1

λ₁ = 326.5 nm ,

or , 326.5nm .

Longest wavelength possible is 326.5

An earthquake emits both S-waves and P-waves which travel at different speeds through the Earth. A P-wave travels at 9 000 m/s and an S-wave travels at 5 000 m/s. If P-waves are received at a seismic station 1.00 minute before an S-wave arrives, how far away is the earthquake center?

Answers

Assuming constant speeds, the P-wave covers a distance d in time t such that

9000 m/s = d/(60 t)

while the S-wave covers the same distance after 1 more minute so that

5000 m/s = d/(60(t + 1))

Now,

d = 540,000 t

d = 300,000(t + 1) = 300,000 t + 300,000

Solve for t in the first equation and substitute it into the second equation, then solve for d :

t = d/540,000

d = 300,000/540,000 d + 300,000

4/9 d = 300,000

d = 675,000

So the earthquake center is 675,000 m away from the seismic station.

In Young's experiment a mixture of orange light (611 nm) and blue light (471 nm) shines on the double slit. The centers of the first-order bright blue fringes lie at the outer edges of a screen that is located 0.497 m away from the slits. However, the first-order bright orange fringes fall off the screen. By how much and in what direction (toward or away from the slits) should the screen be moved, so that the centers of the first-order bright orange fringes just appear on the screen

Answers

Answer:

0.5639m

Explanation:

For a young double slit experiment the expression below gives the angular separation for m dark fringe having slit width d and wavelength λ

=sin⁻¹(mλ/d)

mλ /d =y/L

for the first order,

y= mλL/d

For ratio separation y₀/yD=1 and d= 1

y₀/yD= [mλ ₀L₀/d]/[mλD.LD./d]

1=λ ₀L₀/λD.LD.

λD.LD= λ ₀L₀

L₀= λD.LD/ λ ₀..............(1)

Then substitute the given values into (1) we have

L₀=471 *0.497/611

= 0.3831m

Distance by which the screen has to be moved towards the slit is

LD- Lo

0.947-0.3831= 0.5639m

A wire of 5.8m long, 2mm diameter carries 750ma current when 22mv potential difference is applied at its ends. if drift speed of electrons is found then:_________.
(a) The resistance R of the wire(b) The resistivity p, and(c) The number n of free electrons per unit volume.​

Answers

Explanation:

According to Ohms Law :

V = I * R

(A) R (Resistance) = 0.022 / 0.75 = 0.03 Ohms

Also,

[tex]r = \alpha \frac{length}{area} = \alpha \frac{5.8}{3.14 \times 0.001 \times 0.001} [/tex]

(B)

[tex] \alpha(resistivity) = 1.62 \times {10}^{ - 8} [/tex]

Drift speed is missing. It is given as;

1.7 × 10^(-5) m/s

A) R = 0.0293 ohms

B) ρ = 1.589 × 10^(-8)

C) n = 8.8 × 10^(28) electrons

This is about finding, resistance and resistivity.

We are given;

Length; L = 5.8 m

Diameter; d = 2mm = 0.002 m

Radius; r = d/2 = 0.001 m

Voltage; V = 22 mv = 0.022 V

Current; I = 750 mA = 0.75 A

Area; A = πr² = 0.001²π

Drift speed; v_d = 1.7 × 10^(-5) m/s

A) Formula for resistance is;

R = V/I

R = 0.022/0.75

R = 0.0293 ohms

B) formula for resistivity is given by;

ρ = RA/L

ρ = (0.0293 × 0.001²π)/5.8

ρ = 1.589 × 10^(-8)

C) Formula for current density is given by;

J = n•e•v_d

Where;

J = I/A = 0.75/0.001²π A/m² = 238732.44 A/m²

e is charge on an electron = 1.6 × 10^(-19) C

v_d = 1.7 × 10^(-5) m/s

n is number of free electrons per unit volume

Thus;

238732.44 = n(1.6 × 10^(-19) × 1.7 × 10^(-5))

238732.44 = (2.72 × 10^(-24))n

n = 238732.44/(2.72 × 10^(-24))

n = 8.8 × 10^(28)

Read more at; brainly.com/question/17005119

A thick wire with a radius of 4.0 mm carries a uniform electric current of 1.0 A, distributed uniformly over its cross-section. At what distance from the axis of the wire, and greater than the radius of the wire, is the magnetic field strength equal to that at a distance 2.0 mm from the axis. distance

Answers

Answer:

8 mm

Explanation:

From the information given:

The Ampere circuital law can be used to estimate the magnetic field strength at two points when the distance is less than the radius and when the distance is greater than the radius.

when the distance is less than the radius ; we have:

[tex]B_1 = \dfrac{ \mu_o \times I \times r}{2 \times \pi \times \ d^2}[/tex]

when the distance is greater than the radius; we have:

[tex]B_2 = \dfrac{\mu_o \ \times I}{2 \ \times \pi \times R}[/tex]

Equating both equations together ; we have :

[tex]\dfrac{ \mu_o \times I \times r}{2 \times \pi \times \ d^2} = \dfrac{\mu_o \ \times I}{2 \ \times \pi \times R}[/tex]

[tex]\dfrac{1}{R}= \dfrac{r}{d^2}[/tex]

[tex]R= \dfrac{d^2}{r}[/tex]

where; d = radius of the wire and r = distance;

[tex]R =\dfrac{4^2}{2}[/tex]

[tex]R =\dfrac{16}{2}[/tex]

R = 8 mm

A planar electromagnetic wave is propagating in the x direction. At a certain point P and at a given instant, the magnitude of the electric field of the wave is 0.082 V/m . What is the magnetic vector of the wave at point P at that instant?
A) (0.27 nT)k
B) (-0.27 nT)k
C) (0.27 nTİ
D) (6.8 nT)k
E) (-6.8 nT))

Answers

Answer:

b

Explanation:

A car moving at 30 m/s slows uniformly to a speed of 10 m/s in a time of 5 s. Determine 1. The acceleration of the car. 2. The distance it moves in the third second.

Answers

Answer:

Explanation:

Initial velocity , u = 30 m/s

final velocity , v = 10 m/s

time , t = 5 seconds

1. Acceleration = v - u / t

= 10 - 30 / 5

= -20 / 5

= - 4 m/s

Equipotential lines are lines with equal electric potential (for example, all the points with an electric potential of 5.0 V). Using the plot tool that comes with voltmeter (pencil icon) make two equipotential lines at r = 0.5 m and r = 1.5 m. Enable electric field vectors in the simulation. Put an electric field sensor at different points on the equipotential line and note the direction of the electric field vector. What can you conclude about the direction of the electric field vector in relation to the equipotential lines?

The direction for each field vector is perpendicular to equipotential lines.

Take a snapshot of the simulation showing equipotential lines and paste to a word document.

Answers

....................

What is the force that attracts objects with mass toward each other?

Answers

Explanation:

gravitional force attracts objects with mass toward each other.

Based on The MOHS hardness Scale, which mineral could be scratched by a penny but not by a fingernail

A. Fluorite
B. Calcite
C. Gypsum
D. Talc

Answers

The correct answer is B. Calcite

Explanation:

Mohs hardness scale indicates the hardness of minerals using a scale from 1 to 10 as well as defining the objects or tools that can be used to scratch the minerals. These two features of minerals are shown in the table of the image. About this, it is shown gypsum and talc can be scratched by just a fingernail, considering minerals with a hardness of 2.5 or below can be scratched by a fingernail. In the case of calcite that has a hardness of 3, this cannot be scratched by a fingernail, but it can be scratched by a penny, which works for minerals with a hardness of 3.5 or below. Thus, the correct answer is Calcite.

A fish in an aquarium with flat sides looks out at a hungry cat. To the fish, does the distance to the cat appear to be less than the actual distance, the same as the actual distance, or more than the actual distance? Explain.

Answers

Answer:

p = -q  

he distance is equal to the current distance, so the distance does not change

Explanation:

For this exercise we can solve it using the equation of the constructor

            1 / f = 1 / p + 1 / q

where f is the focal length, p the distance to the object and q the distance to the image

For a flat surface the radius is at infinity, therefore 1 / f = 0, which implies

          1 / p = - 1 / q

           p = -q

Therefore the distance is equal to the current distance, so the distance does not change

How would the interference pattern change for this experiment if a. the grating was moved twice as far from the screen and b. the line density of the grating were doubled?

Answers

Answer:

a) the distance between the interference fringes is reduced by half

b) the distance between stripes is doubled

Explanation:

Interference experiments constructive interference is described by the expression

          d sin θ = m λ

let's use trigonometry to find the distance between the interference fringes

              tan θ=  y / L

dodne y is the distance from the central maximum, L the distance from the slit to the observation screen. In general these experiments are carried out at very small angles

            tan θ = sin θ / cos θ = sin θ

we substitute

             sin θ = y / L

             

            d y / L = m  λ

           y = m λ / d L

a) it asks us when the screen doubles its distance

           L ’= 2 L

subtitute in the equation

           y ’= m λ / (d 2L)

           y ’=( m λ / d L) /2

           y ’= y / 2

the distance between the interference fringes is reduced by half

b) the density of the network doubles

      if the density doubles in the same distance there are twice as many slits, so the distance between them is reduced by half

            d ’= d / 2

we substitute

          y ’= m λ (L d / 2)

          y ’= m λ / (L d) 2

          y ’= y 2

the distance between stripes is doubled

The entropy of any substance at any temperature above absolute zero is called the: Select the correct answer below:
a. absolute entropy
b. Third Law entropy
c. standard entropy
d. free entropy
e. none of the above

Answers

Answer:

b. Third Law entropy  

Explanation:

Third law entropy: In physics, the term "third law entropy" or "the third law of thermodynamics" states that the specific entropy of a particular system at "absolute zero" is considered as a "well-defined constant". It occurs because any system at "zero temperature"  tends to exists or persists in its "ground state" in order for the entropy to be determined or described only by the "degeneracy" of the given ground state.

In the question above, the correct answer is option b.

When light of wavelength 233 nm shines on a metal surface the maximum kinetic energy of the photoelectrons is 1.98 eV. What is the maximum wavelength (in nm) of light that will produce photoelectrons from this surface

Answers

Answer:

λmax = 372 nm

Explanation:

First we find the energy of photon:

E = hc/λ

where,

E = Energy of Photon = ?

λ = Wavelength of Light = 233 nm = 2.33 x 10⁻⁷ m

c = speed of light = 3 x 10⁸ m/s

h = Planks Constant = 6.626 x 10⁻³⁴ J.s

Therefore,

E = (6.626 x 10⁻³⁴ J.s)(3 x 10⁸ m/s)/(2.33 x 10⁻⁷ m)

E = 8.5 x 10⁻¹⁹ J

Now, from Einstein's Photoelectric Equation:

E = Work Function + Kinetic Energy

8.5 x 10⁻¹⁹ J = Work Function + (1.98 eV)(1.6 x 10⁻¹⁹ J/1 eV)

Work Function = 8.5 x 10⁻¹⁹ J - 3.168 x 10⁻¹⁹ J

Work Function = 5.332 x 10⁻¹⁹ J

Since, work function is the minimum amount of energy required to emit electron. Therefore:

Work Function = hc/λmax

λmax = hc/Work Function

where,

λmax = maximum wavelength of light that will produce photoelectrons = ?

Therefore,

λmax = (6.626 x 10⁻³⁴ J.s)(3 x 10⁸ m/s)/(5.332 x 10⁻¹⁹ J)

λmax = 3.72 x 10⁻⁷ m

λmax = 372 nm

what effect does decreasing the field current below its nominal value have on the speed versus voltage characteristic of a separately excited dc motor

Answers

Answer

The effect is that it Decreases the field current IF and increases slope K1

A fish is 80 cm below the surface of a pond. What is the apparent depth (in cm) when viewed from a position almost directly above the fish

Answers

Answer:

Apparent depth (Da) = 60.15 cm (Approx)

Explanation:

Given:

Distance from fish (D) = 80 cm

Find:

Apparent depth (Da)

Computation:

We know that,

Refractive index of water (n2) = 1.33

So,

Apparent depth (Da) = D(n1/n2)

Apparent depth (Da) = 80 (1/1.33)

Apparent depth (Da) = 60.15 cm (Approx)

The apparent depth of the fish is 60 cm.

To calculate the apparent depth of the fish, we use the formula below.

Formula:

R.F(water) = Real depth(D)/Apparent depth(D')R.F = D/D'.................... Equation 1

Where:

R.F = Refractive index of water

Make D' The subject of the equation.

D' = D/R.F................... Equation 2

From the question,

Given:

D = 80 cmR.F = 1.333

Substitute these values into equation 2

D' = 80/1.33D' = 60.01D' = 60 cm

Hence, the apparent depth of the fish is 60 cm

Learn more about apparent depth here: https://brainly.com/question/24319677

Monochromatic light is incident on a pair of slits that are separated by 0.220 mm. The screen is 2.60 m away from the slits. (Assume the small-angle approximation is valid here.)
(a) If the distance between the central bright fringe and either of the adjacent bright fringes is 1.97 cm, find the wavelength of the incident light.
(b) At what angle does the next set of bright fringes appear?

Answers

Answer:

a

   [tex]\lambda = 1.667 nm[/tex]

b

     [tex]\theta = 0.8681^o[/tex]

Explanation:

From the question we are told that

   The distance of separation is [tex]d = 0.220 \ mm = 0.00022 \ m[/tex]

    The  is distance of the screen from the slit is  [tex]D = 2.60 \ m[/tex]

    The distance between the central bright fringe and either of the adjacent bright   [tex]y = 1.97 cm = 1.97 *10^{-2}\ m[/tex]

Generally  the condition for constructive interference is  

      [tex]d sin \tha(\theta ) = n \lambda[/tex]

From the question we are told that small-angle approximation is valid here.

So    [tex]sin (\theta ) = \theta[/tex]

=>        [tex]d \theta = n \lambda[/tex]

=>        [tex]\theta = \frac{n * \lambda }{d }[/tex]

Here n is the order of maxima and the value is  n =  1 because we are considering the central bright fringe and either of the adjacent bright fringes

Generally the distance between the central bright fringe and either of the adjacent bright  is mathematically represented as

         [tex]y = D * sin (\theta )[/tex]

From the question we are told that small-angle approximation is valid here.

So

       [tex]y = D * \theta[/tex]

=>   [tex]\theta = \frac{ y}{D}[/tex]

So

     [tex]\frac{n * \lambda }{d } = \frac{y}{D}[/tex]

     [tex]\lambda =\frac{d * y }{n * D}[/tex]

substituting values

       [tex]\lambda = \frac{0.00022 * 1.97*10^{-2} }{1 * 2.60 }[/tex]

        [tex]\lambda = 1.667 *10^{-6}[/tex]

        [tex]\lambda = 1.667 nm[/tex]

In the b part of the question we are considering the next set of bright fringe so  n=  2

    Hence

     [tex]dsin (\theta ) = n \lambda[/tex]

    [tex]\theta = sin^{-1}[\frac{ n * \lambda }{d} ][/tex]

    [tex]\theta = sin^{-1}[\frac{ 2 * 1667 *10^{-9}}{ 0.00022} ][/tex]

    [tex]\theta = 0.8681^o[/tex]

Rank the ultraviolet, infrared, and visible regions of theelectromagnetic spectrum in terms of lowest to highest energy,frequency, and wavelength.
Energy: < <
Frequency: < <
Wavelength: <

Answers

Answer:

1. Energy: ultraviolet>> visible> infrared

2. Frequency: ultraviolet>> visible > infrared

3. Wavelength: infrared >> visible > ultraviolet

Explanation:

Electromagnetic waves are a class of waves that do not require material medium for their propagation, and travel at the same speed. They are arranged with respect to either their decreasing wavelength or increasing frequency to form a spectrum called an electromagnetic spectrum.

Comparing the energy, frequency and wavelength of ultraviolet, infrared and visible regions, it can be deduced that:

1. Energy: ultraviolet has the highest energy, then followed by visible, and infrared has the lowest energy.

i.e energy: ultraviolet>> visible> infrared

2. Frequency: ultraviolet radiation has the highest frequency, visible region has a greater frequency than that of infrared.

i.e frequency: ultraviolet>> visible > infrared

3. Wavelength: infrared radiation has the highest wavelength, followed by visible region, and ultraviolet radiation has the lowest wavelength.

i.e  wavelength: infrared >> visible > ultraviolet

In terms of lowest to the highest energy,frequency, and wavelength is;

Energy: infrared > visible light > ultraviolet

Frequency: infrared > visible light > ultraviolet

Wavelength: ultraviolet > visible light > infrared

The electromagnetic spectrum:

The electromagnetic spectrum is made up of all the electromagnetic waves (ultraviolet, infrared, and visible) arranged according to their energy,frequency, and wavelength.

The ultraviolet: This wave is seen in the sunlight and is made up of wavelength of 10nm to 400nm. A frequency of [tex]10^{16}[/tex](Hz).Infrared wave: They are invisisble to the human eye but can be felt as heat. It has frequency of [tex]10^{12}[/tex]Hz and a wavelength of 780nm to 1mm.Visible light: This is part of the electromagnetic wave that the eye can view. It has frequency of [tex]10^{15}[/tex]Hz and a wavelength of 380 to 700nm.

Learn more about electromagnetic spectrum here:

https://brainly.com/question/13803241

A green light is submerged 2.70 m beneath the surface of a liquid with an index of refraction 1.31. What is the radius of the circle from which light escapes from the liquid into the air above the surface

Answers

Answer:

The radius is  [tex]r = 3.1905 \ m[/tex]

Explanation:

From the question we are told that

        The  distance  beneath the liquid  is  [tex]d = 2.70 \ m[/tex]

        The refractive index of the liquid is  [tex]n_i = 1.31[/tex]

Now the critical value is mathematically represented as

         [tex]\theta = sin ^{-1} [\frac{1}{n_i} ][/tex]

substituting values

         [tex]\theta = sin ^{-1} [\frac{1}{131} ][/tex]

         [tex]\theta = 49.76^o[/tex]

Using SOHCAHTOA rule we have that

         [tex]tan \theta = \frac{ r}{d}[/tex]

=>     [tex]r = d * tan \theta[/tex]

substituting values  

        [tex]r = 2.7 * tan (49.76)[/tex]

        [tex]r = 3.1905 \ m[/tex]

         

To a person swimming 0.80 m below the water surface of a swimming pool, the diving board directly overhead appears to be a height of 5.20 m above the swimmer. What is the actual height of the diving board above the water surface

Answers

Answer:

The actual height is 3.308 m.

Explanation:

The person is swimming below the water surface at distance = 0.80 m  

The height of the diving board appears at a distance or height = 5.20 m

Now we have to find the actual distance of the diving board from the water surface.

We know the refractive index of water is 1.33.

Therefore, the actual height = (Distance that appears – distance below the water surface) / Refractive index.

The actual height = ( 5.20 - 0.80 ) / 1.33 = 3.308 m

If a soap bubble is 130 nmnm thick, what wavelength is most strongly reflected at the center of the outer surface when illuminated normally by white light

Answers

Answer:

The question is not complete, here is the other part.

Assume that n = 1.36.

Express your answer to three significant figures and include the appropriate units.

λ = 707.2nm

Explanation:

n = 1.36

t = 130

2 n t= (m+1/2) λ

To solve for λ.

λ = 2 n t ÷ m+1/2

λ = 2 × 1.36 × 130 ÷ m +1/2

λ =

If m= 0

λ= 353.6 ÷ 0+ 1/2

λ = 353.6 × 2

= 707.2nm

Please help!
Much appreciated!​

Answers

Answer:

F = 2.7×10¯⁶ N.

Explanation:

From the question given:

F = (9×10⁹ Nm/C²) (3.2×10¯⁹ C × 9.6×10¯⁹ C) /(0.32)²

Thus we can obtain the value value of F by carrying the operation as follow:

F = (9×10⁹) (3.2×10¯⁹ × 9.6×10¯⁹) /(0.32)²

F = 2.7648×10¯⁷ / 0.1024

F = 2.7×10¯⁶ N.

Therefore, the value of F is 2.7×10¯⁶ N.

Other Questions
Write a program that asks the user to enter a series of numbers separated by commas. Here is an example of valid input: 7,9,10,2,18,6 The program should calculate and display the sum of all the numbers. Bethany sells roses and petunias. The expression 3r+2.5p3r+2.5p3, r, plus, 2, point, 5, p gives the cost (in dollars) of rrr roses and ppp petunias. What is the cost of 777 roses and 888 petunias? \$$dollar sign Jovie is maintaining a camp fire. She has kept the fire steadily burning for 10 hours with 15 logs. She wants to know how many hours (h)left parenthesis, h, right parenthesis she could have kept the fire going with 9 logs. She assumes all logs are the same. What are the uses of'Tabulating machine'? The layer of the atmosphere that contains weather is the Which is the earliest document to which the United States can trace its democratic heritage? The term Light hearted devil refers to what? Answer ASAP please, Will give brainliest. Convert to slope-intercept from: y-3=6(x-5) Which equation can be used to solve the problem?75 percent of what number is 150?O75 x 1150 x 175150150 x 2 30075x2 150200x2 40075 x2 15075 x 2100 x 2150200 how does the cell wall contributes towards maintaining homeostasis in the cell In the 2004 Olympic games Russia, China and the United States won a total of 96 gold medallions if the United States won 4 more medals than China and the medals achieved by the United States and Russia are twice those obtained by China determine the number of gold medals won by Russia As the athletic shoe buyer for Sports Authority, how would you go about forecasting sales for a new Nike running shoe? A 590-turn solenoid is 12 cm long. The current in it is 36 A . A straight wire cuts through the center of the solenoid, along a 4.5-cm diameter. This wire carries a 27-A current downward (and is connected by other wires that don't concern us).What is the magnitude of the force on this wire assuming the solenoid's field points due east? what part of a cell determines a persons blood type what is meaning of rate? why did the spanish, dutch, french and english treat native peoples differently Explain how surface waves can have characteristics of both longitudinal waves and transverse waves. Please use 3 content related sentences help... Please help!!!!!!!!!!! guage Arts 8AmonWhich idea is explicitly stated in this passage?AbcThere was always radio which brought usSongs from wlac in nashville and what wewould now callEasy listening or smooth jazz but when IlistenedLate at night with my portable (that I was soproud of)Tucked under my pillowI heard nat king cole and matt dennis, junechristy and ella fitzgeraldAnd sometimes sarah vaughan sing blackO The poem takes place in the past.The speaker has a deep appreciation of jazzmusicO The speaker was proud of her radio.The speaker loves to drink coffeecoffeeWhich I now drinkIt was just called music- "A Poem For My Librarian, Mrs. Long,"Nikki Giovanni