ICOT Industries issued 28 million of its $1 par common shares for $492 million on April 11. Legal, promotional, and accounting services necessary to effect the sale cost $3 million. Required: 1. Prepare the journal entry to record the issuance of the shares. (If no entry is required for a transaction/event, select "No journal entry required" in the first account field. Enter your answers in millions (i.e., 10,000,000 should be entered as 10).)

Answer:

Harvey's Hardware

Marginal cost of producing the third lawnmowers:

d. $100

Explanation:

Harvey's marginal cost for producing the third unit of lawnmowers is the additional cost that resulted when the total cost increased from $200 to  $300.  However, it can be deciphered from the case that the marginal cost for Harvey, which it is supposed to be  a variable cost, is traceable to the direct labor costs.  This implies that the fixed cost element for Harvey in the production of the lawnmowers has been relatively fixed at $100.  It does not vary with the volume of production, while the direct labor costs vary with the volume of lawnmowers produced by Harvey.

Answer:

B. Project A

Explanation:

Coefficient of variation=standard deviation/expected return value

Project A:

Coefficient of variation=$173,000/$310,000= 0.558  

Project B:

Coefficient of variation=$413,000/$676,000=  0.611  

Project C:

Coefficient of variation=$120,000/$163,000=0.736

Project D:

Coefficient of variation=$101,000/$134,000=0.754

The Project A has the lowest rate of risk per unit of return, hence, it is the preferred choice of investment

Answer:

No,  as the net present value comes in negative

Explanation:

As we know that

Net present value = Present value of cash inflows - Initial investment

where,

Present value os $163,000

And, the initial investment is $180,000

Now placing these values to the above formula

So, the net present value is

= $163,000 - $180,000

= -$17,000

Therefore the company should not accept the project as net present value is in negative that is -$17,000

Answer:

Roth IRA

Explanation:

Based on this scenario, it can be said that the best recommendation would be a Roth IRA. This is an individual retirement account that non-deductible tax-free growth for retirement at age 59 1/2. As of 2018, the yearly limit for a Roth IRA account is $5,500 meaning that the client in this scenario would not have any problem investing the entire $5000 as soon as they open the account. And since he is in a low tax bracket he should not have any problem opening an Account.

Answer:

A more established company may find it difficult to implement an enterprise-wide, customer-centric culture due to the following reasons:

A) Existence of a Multi-Product Business Model

A business entity that is well established with a lot of years under its belt will find it a tough challenge to shift from a product-oriented business model to a customer-oriented business model.

To be product-focused simply means that that a company has woven its organisational structure around products. For examples, a company that is into the gaming business may have teams for their Sports Betting Section, another for their online gaming section, game hardware section, gaming apps section etc.

First, for these various teams, their performance metric will largely depend on how functionally efficient their products are.  

Second, techy or geeky staff are seldom efficient when it comes to emotional intelligence - a key requirement for being customer efficient.

One way to handle this is to ensure that there is a central Customer Relationship Management team that oversees the customers for each product.

B) Organisational Inflexibility

As direct to the point as it sounds, getting market intelligence for with the intention to use them for decision making is challenging. What is tougher is the ability to implement the insights from such intelligence to effect a turn around in the way customers perceive and respond to a company's offerings.

The ability to quickly take gather market intel, agree on a strategic direction based on same and execute can be referred to organisational agility.  

The more bureaucratic and hierarchical an organisation is (this, by the way, characterises older and more established business systems) the less agile it is likely to be.

Cheers!

Answer:

For   Countries (per capita)          United States of America (per capita)

Ethiopia:        

$380                                               $48,468

Mexico:                                          

$9,271                                             $48,468

India:

$1,358                                             $48,468

Japan:

$44,508                                          $48,468

Explanation:

Ratio per Capita also known as Gross Domestic Product per Capita (GDP Capita) is the monetary measure of the market value of all the final goods and services produced in a specific time period within the country in view. It is useful for comparing national economies of different countries on the international market.

Answer:

The economic growth will be lower.

Explanation:

The rise in pollution and the doubling of the rate of depreciation will affect economic growth adversely. However, rapid wear and tear of capital will cost the person and it will reduce the purchasing power. Thus, lower purchasing power will result in lower economic growth. Moreover, pollution creates three main problems that are reduced labor productivity, rise in health problems, and loss of crop yield. So the reduction in all these factors will also slow down economic growth.

Answer:

So, from every $1 of total assets, $1.08 worth of sales are generated.

Explanation:

To calculate how many dollars worth of sales are generated by $1 of total assets, we use the total assets turnover ratio. It is an accounting measure that measures the efficiency of the company's assets in generating sales. It calculates the dollar values of sales generated by each $1 of total assets. The formula for total assets turnover is,

Total Assets Turnover = Sales / Average Total Assets

We already know the level of sales. We need to determine the value of total assets first.

Total Assets = Fixed assets + Current Assets

As we know that net working capital = current assets - current liabilities,

So, the current assets are,

2715 = Current assets - 3908

2715 + 3908 = Current assets

Current assets = $6623

Total assets = 6623 + 22407

Total assets = $29030

Total Assets Turnover = 31350 / 29030

Total assets turnover = 1.0799 rounded off to 1.08

So, from every $1 of total assets, $1.08 worth of sales are generated.

Answer:

Unitary cost= $118

Explanation:

Giving the following information:

Production= 43,000

Direct materials $43.00 per unit

Direct manufacturing labor $8.00 per unit

Variable manufacturing costs $4.00 per unit

Fixed manufacturing costs $63.00 per unit

The absorption costing method includes all costs related to production, both fixed and variable. The unit product cost is calculated using direct material, direct labor, and total unitary manufacturing overhead.

Unitary cost= 43 + 8 + 4 + 63

Unitary cost= $118

Answer:

Total Quality Management

Explanation:

Total Quality Management is an approach in which all the employees of the company work to improve the entire process to offer a good customer experience. According to this, the answer is that the term that means managing the entire organization so that it excels on all dimensions of products and services that are important to customers is Total Quality Management.

Answer:

The answer is below

Explanation:

Three major factors that contribute to an employee's decision to join a union.

1. Greater Bargaining Power

As an individual employee, it can be difficult to negotiate for wage increase or better working condition generally. However, being a member Union, together the group can negotiate and demand for what they feel is right for their members. In a rare occasion, the threat of a strike by a Union is a great tool to bargain well with the employer.

2. Minimize Discrimination

As a Union, it is easier to demand for equality in terms of wage, working condition, promotion, leave etc. Unlike individual employee, who may be facing discrimination from his or her supervisor as to employee related issue. Union can ensure the management used the right policies that seek for equality among all its employees without favoritism or discrimination.

3. Sense of Security

An employee may join the Union on the basis that, Union can save them against abrupt dismissal or other types of work insecurities including accident, injury, illness etc.

Also, Union can help secure retirement benefits and ensure the management improve on the employees' welfare generally.

Five reasons that have contributed to the trend of decline in unionization

1. Irrelevance appearance of the Union:

Many workers believe that Union is not necessary because in the time of economic boom, getting wage increase and other working benefits can be gotten be individual employee and not necessarily through a Union, and at the same time, during economic downturn, unions often times don't have the capacity to protect their members from layoffs, wage and benefit reductions and tougher working conditions.

2. Poor Image of the Union:

Many employers and employees tend to view union with negativity, in the sense that, often times, their demands can be unreasonable, and are characterized by issue of labor racketeering, mob influence and embezzlement.

3. Unions are Seen as Political:

For some employees, they believe that Union tend to use their money or Union dues to support a political candidate. This in turn has made some employees who are neutral, not wanting to join the Union.

4. Reliance on goverment:

Many employees now believe that, government, not Union gives better form of security and voice to air their opinions. These includes pensions, healthcare, protection.

5. Global competition and deregulation in Unionized industries:

Since most of the companies or industries that have union has been deregulated, this has increased its competition, there by, making the need for union not really necessary, because with or without Union, one may still faces sack.

Answer:

1-A. Sales budget

                                   1st             2nd             3rd             4th

                             Quarter     Quarter       Quarter       Quarter        Year

Sales units              12,200      13,200        15,200         14,200    54,800

Price per unit           $21             $21             $21             $21           $21

Total sales          $256,200  $277,200   $319,200   $298,200   $1,150,800

1-B. Cash collections budget

                                   1st             2nd             3rd             4th

                             Quarter     Quarter       Quarter       Quarter        Year

Collections from  $72,600    $76,860     $83,160      $95,760   $72,600

previous quarter  

Collections from $166,530  $180,180  $207,480  $193,830  $1,003,900

current quarter  

Total                    $239,130  $257,040  $290,640 $289,690  $1,076,500

2. Productions budget

                                   1st             2nd             3rd             4th

                             Quarter     Quarter       Quarter       Quarter        Year

Sales units              12,200      13,200        15,200         14,200    54,800

Planned ending       2,640       3,040          2,840          2,640       2,640

inventory

Total production     14,840      16,240        18,040         16,840    65,960

required

- Beginning              2,440        2,640         3,040           2,840       2,440

inventory

Units to be              12,400      13,600        15,000         14,000     63,520

produced

Answer:

sells budget

Explanation:

Answer:

functional finance.

Explanation:

The budget philosophy of functional finance implies that the government should do all that is necessary in order to make the economy operate at full potential. The outcomes of whatever budget preparations are ignored in philosophy of functional finance. What is most paramount is to focus on whatever that would bring growth and stability to the economy.

In the philosophy of functional finance, what is most important about balancing the federal budget is its use to promote an economy so that it can operate at full potential.

Answer:

b. 1.50(150%)

Explanation:

Given that, the standard time per packages is 10 minutes

Then, the total time taken in eight hour shift is 8 * 60 = 480 minutes

The standard output = Total time taken / Standard time = 480/10 = 48 packages

Therefore, the efficiency of Kaitlyn = Kaitlyn's Output / Standard output

=72 / 48

= 1.5

Hence, the answer is 150% or 1.5

Answer:

Contribution margin ratio= 0.42

Explanation:

Giving the following information:

Bryce Co. sales are $801,000

Variable costs are $465,100

Operating income is $287,000.

To calculate the contribution margin ratio, we need to use the following formula:

contribution margin ratio= (sales - variable cost) / sales

contribution margin ratio= (801,000 - 465,100) / 801,000

contribution margin ratio= 0.42

Answer:

Correct Answer:

invest in the minimum standard deviation portfolio and, in addition, only in risky securities.

Explanation:

For an investor aiming to invest in a portfolio so that, his minimum standard deviation would lie towards the optimal right, he or she would need to invest in extremely risky securities. And, also, there will be need to maintain minimum standard deviation portfolio.

Answer:

Cost Item             Direct            Direct        Manufacturing      Period

                            materials       labor         overhead               costs

Rent on factory                                           $11,600

equipment

Insurance on                                               $2,500

factory building

Raw materials     $79,700

Utility costs                                                  $900

for factory

Supplies for                                                                               $300

general office  

Wages assembly                       $63,700

line workers  

Depreciation on                                                                        $800

office equipment  

Miscellaneous                                               $1,200          

materials  

Factory manager’s                                        $6,400

salary

Property taxes on                                          $500

factory building

Advertising for                                                                           $14,500

helmets

Sales commissions                                                                   $10,600

Depreciation on                                              $1,600

factory building                                                                                          

TOTALS                   $79,700        $63,700     $24,700         $26,200

Answer:

a. $478,450

b.Dr Construction in Process $165,500

Cr  Deferred tax liability  $49,650

Cr   Retained earnings  $115,850

Explanation:

A. Calculation for the amount of net income that would be reported in 2015 for Pam Erickson Construction Company

Using this formula

Net income =(Income before income tax ) Income before income tax-Tax rate

Let plug in the formula

Net income= $683,500 - (683,500 × 30%)

Net income= $683,500 - $205,050

Net income= $478,450

B. Preparation of the Journal entry(ies) that are necessary to adjust the accounting records

For Pam Erickson Construction Company

Dr Construction in Process $165,500

Cr  Deferred tax liability  $49,650

($165,500 × 30%)

Cr   Retained earnings  $115,850

($165,500 × (100%-30%)

Answer: The minimizing the imbalance in the workloads among workstations.

Explanation:

Workspace can inspire informal and productive encounters if it balances what three physical and social aspects.

Answer: primarily cyclical deficit

Explanation:

Budget deficit occurs when the government expenditure for a certain year is more than the revenue the government makes.

Since the the United States economy was operating close to potential. The budget deficit experienced by the United States in 1969 was primarily cyclical deficit.

Answer:

d. Our workforce may be waiting on delayed arrivals of inputs needed to do the work.

Explanation:

There are two possible sources for 25% of the jobs not being delivered on time:

If we followed Juran's Law, we can simply assume that the problem here has to do with our productive system (like 85% of production errors). Two clear problems are obvious:

Obviously we cannot answer these questions just be reading two paragraphs, but that is what should be answered in order to solve the issues.

Answer:

A promise to deliver a deed

Explanation:

The term, 'strict performance' is used to describe a contract between two parties. A contract is an agreement between two parties, and it is legally binding. When discharging contracts involving services, 'substantial performance' is required. For example, if I tell a painter to paint my house blue except for the kitchen and storeroom which should be painted white, and he does accordingly but failed in painting the kitchen white, he has performed substantially even though there was a minor breach. The consequences of which would be borne by him.

'Strict performance' is required in contracts where the terms are stated in express terms and the standards are very high. A 'deed' is such a contract because it is a document specifying the legal rights of a person or the ownership of a property. It requires the signatures of the two parties. Therefore, strict performance and adherence to the contractual deed are required.

Answer: $7,000

Explanation:

From the question, we are informed that IP Company has a preliminary cash balance of $25,000 and an agreement with the bank that it will keep a minimum balance of $20,000 and that IP Company has a beginning loan balance of $12,000.

The ending loan balance will be:

= $20,000 + $12,000 - $25,000

= $32,000 - $25,000

= $7,000

Answer:

Explanation:

Given that:

A mail-order house uses 18,000 boxes a year.

Carrying costs are 60 cents per box a year =$0.60

and ordering costs are $96.

Determine:

A. The optimal order quantity.

The optimal order quantity can be calculated by using the formula:

[tex]Q_o = \sqrt{\dfrac{2DS}{H}}[/tex]

[tex]Q_o = \sqrt{\dfrac{2*18000*96}{0.60}}[/tex]

[tex]Q_o = \sqrt{\dfrac{3456000}{0.60}}[/tex]

[tex]Q_o = \sqrt{5760000}[/tex]

[tex]Q_o = 2400 \ boxes[/tex]

B. The number of orders per year.

of boxes: 1,000-1,999 Price per box: $1.25

of boxes: 2,000- 4,999 Price per box: $1.20

of boxes: 5,000- 9,999 Price per box : $1.15

of boxes: 10,000 or more Price per box : $1.10

SInce 2400 boxes lies within ''of boxes: 2,000- 4,999 Price per box: $1.20 ''

Total cost = Carrying cost + ordering cost + Purchasing cost

[tex]Total \ cost =(\dfrac{Q}{2} )H +(\dfrac{D}{Q}) S+PD[/tex]

[tex]Total \ cost =(\dfrac{2400}{2} )0.60 +(\dfrac{18000}{2400}) 96+1.20*18000[/tex]

Total cost  = ( 1200) 0.60 + 7.5(96) + 1.20(18000)

Total cost  = 720 + 720 + 21600

Total cost  =  $ 23040

If the order size is 5000, the price per box will be 1.15

[tex]Total \ cost =(\dfrac{Q}{2} )H +(\dfrac{D}{Q}) S+PD[/tex]

[tex]Total \ cost =(\dfrac{5000}{2} )0.60 +(\dfrac{18000}{5000}) 96+1.15*18000[/tex]

Total cost = 2500 (0.60) + 3.6 (96) + 20700

Total cost = 1500 + 345.6 + 20700

Total cost = $22545.6

If the order size is 10000 , the price per box will be 1.10

[tex]Total \ cost =(\dfrac{Q}{2} )H +(\dfrac{D}{Q}) S+PD[/tex]

[tex]Total \ cost =(\dfrac{10000}{2} )0.60 +(\dfrac{18000}{10000}) 96+1.10*18000[/tex]

Total cost = 5000 (0.60) + 1.8(96)  + 19800

Total cost =  3000 + 172.8 + 19800

Total cost = $22972.8

From the three total cost, the least minimum cost of ordering is: 5000

So; the number of orders per year = total number of boxes per year/ boxes per order

the number of orders per year = 18000/5000

the number of orders per year = 3.6 orders per year

Answer:

c. By using the Select Data button and the Select Data Source option

Explanation:

A scatter plot is a plot which is used to plot the points of the data on the horizontal and the vertical axis also it depicts how one variable is affected by the another.

After preparing the scatter plot to enter the data in the scatter plot we need to use the data button and then data source option so that the data could be entered in the scatter plot

hence, option c is correct

Answer:

In a situation where the company established in a region or country is experiencing a labor shortage, the best action to be taken would be to employ labourers from other regions or countries and moved them towards their location. This approach is adopted mostly by construction and hospitality industries.

Explanation:

Answer:

Explanation:

To learn more about IT careers or just carriers in general, one can contact the Career counselor at school. Their job is to help students find out more abut careers so that they know which path they would like to follow.

One can also attend information sessions where they can listen to people speak on IT careers and ask questions they would like answers to as well.

A practical way to find out about IT careers is to intern at an IT firm. This way you get to see first hand what the job entails and if it is the kind of thing you would like to do.

There are also professional organizations that offer certifications in IT such as CompTIA. As they are well versed in the area, they can provide more information on IT careers including the educational background required.

Answer:

1. Scheduling an appointment with a career counselor at school.

2. Attending an informational session.

3. Applying for an internship

5. Contacting a professional organization, such as CompTIA.

Explanation: This is the correct answer on Edge 2021, just did the assignment. Hope this helps ^-^.

Answer:

When the Fed raises the federal funds rate, the inflation rate decreases about two years later.

Explanation:

When trying to stimulate the economy either by increasing or decreasing, policymakers have to take into consideration how it would effect interest rate, amount of money available in the economy, loans that would be acquired by banks and the behavior of interest rate.

Interest rate can be impacted quickly even though the period of time it would take for such action to have a reflection on what quantity of money is available in the economy. Then also a period of 2 years would be taken for this action to take effect on inflation.

Therefore

When the Fed raises the federal funds rate, the inflation rate decreases about two years later.

Answer:

Hello some parts of your question is missing attached below is the missing part

Answer : value added times : 30 minutes , 30 minutes

               non-value added times: 1210 minutes, 130 minutes

               Total lead times : 1240 minutes,  160 minutes

               value added time as a ratio: 2.4%, 18.8%

Explanation:

Given data:

production batch sizes = 40 units

process step 1 = 6 minutes

process step 2 = 10 minutes

process step 3 = 6 minutes

process step 4 = 8 minutes

Determining : The value added, non-value added , total lead times and value added ratio under the present and proposed production approaches

UNDER PRESENT PRODUCTION APPROACH

Th value added time:

= summation of all process times = (6+10+6+8) = 30 minutes

Non-value added time:

=  Value added time *(Batch size -1) + move time between each step

= 30*39+8*5

= 1170 +40 = 1210 minutes

total lead time :

= value added time + non-value added time

= 30 + 1210 = 1240 minutes

value added time as a percentage/ratio

(value added time / total lead time) * 100

= 30 / 1240 * 100 = 2.4%

UNDER PROPOSED PRODUCTION APPROACH

value added time :

= summation of all process times = (6+10+6+8) = 30 minutes

Non-value added time :

=  Value added time *(Batch size -1) +  time between each step

= 30*4+2*5 = 120 + 10 = 130 mins

total lead time :

= value added time + non-value added time  = 30 +130 = 160 mins

value added time as a percentage/ratio:

(value added time / total lead time ) * 100

= (30 / 160) * 100 = 18.8%

Answer:

a) Defects Per Million Opportunity

Explanation:

DPMO is an acronym which stands for Defects Per Million Opportunity. Defects per Million Opportunities refers to a standard metric which represents the number of defects in a process per one million opportunities.

In order to calculate the DPMO, we divide the number of defects by the number of opportunities and then multiply by a million.

Additionally, when a quality characteristics or properties do not tally with a standard or specifications it is generally referred to as a defect.

Hence, in a six sigma approach to quality or level of performance, the defects per million opportunities (DPMO) is 3.4.