I need to summarize each type of radioactive decay.

Answer:

The concentration of the acid, HCl is 0.013 M

Explanation:

We'll begin by writing the balanced equation for the reaction. This is illustrated below:

2HCl + Ca(OH)₂ —> CaCl₂ + 2H₂O

From the balanced equation above,

The mole ratio of the acid, HCl (nₐ) = 2

The mole ratio of base, Ca(OH)₂ (n₆) = 1

Finally, we shall determine the molarity of the HCl. This can be obtained as follow:

Volume of acid, HCl (Vₐ) = 250 mL

Molarity of base, Ca(OH)₂ (M₆) = 0.118 M

Volume of base, Ca(OH)₂ (V₆) = 13.7 mL

Molarity of acid, HCl (Mₐ) =?

MₐVₐ / M₆V₆ = nₐ/n₆

Mₐ × 250 / 0.118 × 13.7 = 2/1

Mₐ × 250 / 1.6166 = 2

Cross multiply

Mₐ × 250 = 1.6166 × 2

Mₐ × 250 = 3.2332

Divide both side by side 250

Mₐ = 3.2332 / 250

Mₐ = 0.013 M

Thus, the concentration of the acid, HCl is 0.013 M

Answer:

The cation affects the intensity of the color more than the color of the solution.

Explanation:

According to Beer Lambert law, the intensity of the colour of the solution depends on the concentration of the specie responsible for the colour in the solution.

Let us recall that transition metal compounds are coloured in solution due to electronic transitions.

Therefore, the cation affects the intensity of the color more than the color of the solution.

Answer:

1 Mole = 84.007 g/mol

Explanation:

Sodium bicarbonate (IUPAC name: sodium hydrogen carbonate), commonly known as baking soda or bicarbonate of soda, is a chemical compound with the formula NaHCO3

Answer:

a. Na₃PO₄

b. NH₄Cl

c. FeCl₃

d. KClO₃

Explanation:

a. Sodium tetraoxophosphate(V) Na₃PO₄

3Na⁺ + PO₄³⁻ → Na₃PO₄

b. Ammonium Chloride NH₄Cl

NH₄⁺ + Cl⁻ → NH₄Cl

c. Iron(III)chloride

Fe³⁺ + Cl⁻ → FeCl₃

d. Potassium trioxochlorate(V) KClO₃

K⁺ + ClO₃⁻ → KClO₃

Answer:

B porque si :) y eso Jsksjs

Answer:A

Because it's an amino acid and all amino acids are key to any part of your body.

Answer:

[tex]V_{Na_2S}=368mL[/tex]

[tex]m_{Al_2S_3}=67.3gAl_2S_3[/tex]

Explanation:

Hello there!

In this case, according to the given information, it is possible to realize that the only way for us to calculate the required volume of sodium sulfide, is by calculating the moles of this substance consumed 163 mL of 2.75 mol/L aluminum sulfate by using the definition of molar concentration and the 1:3 mole ratio between these two:

[tex]n_{Na_2S}=0.163L*2.75\frac{molAl_2(SO_4)_3}{L}*\frac{3molNa_2S}{1molAl_2(SO_4)_3} =1.34molNa_2S[/tex]

Now, we divide these moles by the molar concentration of sodium sulfide to obtain the required volume:

[tex]V_{Na_2S}=\frac{1.34molNa_2S}{3.65mol/L} =0.368L=368mL[/tex]

For the last part, we now use the 1:1 mole ratio of aluminum sulfate to aluminum sulfide and the molar mass of the latter (150.158 g/mol) in order to calculate the required mass:

[tex]m_{Al_2S_3}=0.163L*2.75\frac{molAl_2(SO_4)_3}{L}*\frac{1molAl_2S_3}{1molAl_2(SO_4)_3} *\frac{150.158gAl_2S_3}{1molAl_2S_3} \\\\m_{Al_2S_3}=67.3gAl_2S_3[/tex]

Regards!

For exothermic reactions, ΔH is always negative, energy is considered a product, and energy is released in the reaction.

An exothermic reaction is one in which energy, usually in the form of heat, is released to the environment from the reaction. In other words, the final temperature of an exothermic reaction would always be more than the initial temperature.

This also means that heat energy is a product of exothermic reactions and this heat is released to the environment from the reaction.

More on exothermic reactions can be found here: https://brainly.com/question/10373907?referrer=searchResults

Answer:

a, d, and e is correct on edge of the nuity

Explanation:

have a good day

Answer:

pOH = - log[OH-]

[OH-] = 0.6M

[tex]pOH \: = - log(0.6) \\ = 0.2218487496 \\ pH \: + pOH \: = 14 \\ pH \: + 0.221848749 = 14 \\ pH = 14 - 0.221848749 \\ = 13.77815125 \\ 13.8[/tex]

Answer:

A wave character exhibited by all particles

Explanation:

The central idea in quantum mechanics is the paradox of wave-particle duality. In quantum mechanics, all particles are believed to also exhibit wavelike characters.

The electron is assumed to behave as a wave hence its position can not be precisely determined according the Heisenberg's uncertainty principle.

These are the underlying postulates that informed Erwin Schrödinger's wave mechanical model of the atom.

Hence, the basic postulate of quantum mechanics is that a wave character is exhibited by all particles.

Answer:

Chlorine gas reacts with potassium bromide to form potassium chloride in solution and liquid bromine.

Explanation:

The balanced equation of the chemical reaction is given below:

Cl2(g) + 2KBr(aq) → 2KCl(aq)+ Br2(l)

According to the above equation, it can be said that chlorine in its gaseous form (Cl2) reacts with pottasium bromide (reactants) to form pottasium chloride (KCl) and bromine, which is a liquid at room temperature.

Answer:

D: Chlorine gas reacts with potassium bromide to form potassium chloride in solution and liquid bromine.

Answer:

pH = 13.1

Basic

Explanation:

Step 1: Given data

Hydrogen ion concentration ([H⁺]): 6.7 × 10⁻¹⁴ M

Step 2: Calculate the pH of the solution

We will use the definition of pH.

pH = -log [H⁺]

pH = -log 6.7 × 10⁻¹⁴ = 13.1

Since pH > 7, the solution is basic.

Answer:

plastic

........................

Answer:

The correct answer is 0.020 M.

Explanation:

To solve this problem, we can use the equation M1V1 = M2V2, where M represents the molarity of the solution and V represents the volume of solution.  Since we are given that the original solution is 50 mL and 0.40 M, these values are V1 and M1, respectively.  The solution after dilution has a volume of 1000 mL, so this value is V2.  We are solving for the molarity after dilution, which represents M2.

If we plug in the values specified above, we get the following:

M1V1 = M2V2

(0.40 M)(50.0 mL) = (M2)(1000.0 mL)

Solving for M2, we get:

M2 = 0.020 M

Notice that our answer has 2 significant figures because 0.40 has 2 significant figures, the least of any values given in the problem.

Therefore, the answer is 0.020 M.

Hope this helps!

Answer:

I dont no ma men

Explanation:

Sorry cause a dont no

Answer: The number of milliliters of 654 mL for 0.587 M NaOH required to precipitate all of the [tex]Fe^{3+}[/tex] ions in 197 mL of 0.654 M [tex]FeCl_{3}[/tex] solution as [tex]Fe(OH)_{3}[/tex].

Explanation:

The reaction equation is as follows.

[tex]FeCl_{3}(aq) + 3NaOH(aq) \rightarrow Fe(OH)_{3}(s) + 3NaCl(aq)[/tex]

Therefore, moles of [tex]Fe(OH)_{3}[/tex] are calculated as follows.

Moles = Molarity of [tex]Fe(OH)_{3}[/tex]  [tex]\times[/tex] Volume (in L)

= 0.654 M [tex]\times[/tex] 0.197 L  

= 0.128 mol

Now, according to the given balanced equation 1 mole of [tex]FeCl_{3}(aq)[/tex] reacts with 3 moles of NaOH(aq). Hence, moles of [tex]Fe(OH)_{3}[/tex]  reacted are calculated as follows.

3 [tex]\times[/tex] 0.128 mol = 0.384 moles of NaOH

As moles of NaOH present are as follows.

Moles of NaOH = Molarity of NaOH [tex]\times[/tex] Volume (in L)

0.384 mol = 0.587 M [tex]\times[/tex] Volume (in L)

Volume (in L) = 0.654 L (1 L = 1000 mL) = 654 mL

Thus, we can conclude that the number of milliliters of 654 mL for 0.587 M NaOH required to precipitate all of the [tex]Fe^{3+}[/tex] ions in 197 mL of 0.654 M [tex]FeCl_{3}[/tex] solution as [tex]Fe(OH)_{3}[/tex].

Answer:

1st structure - Meso

2nd structure - Chiral

3rd structure - achiral

Explanation:

In the 1st structure there is nitrogen atom bonded with 4 different groups. It is Meso compound. In the second structure a carbon atom is attached with hydroxide molecule OH and has four different environment. It is Chiral compound. In the third structure no atom have different atom or group surrounding it. Therefore it is Achiral compound.

Answer:

d. none of the above

Explanation:

An electrochemical cell consists of two half-cells, with each cell containing an electrode.

The potential of a single electrode in a half-cell is called the Single electrode potential.

The emf of a cell that consists of two half-cells can be determined by connecting them to a voltmeter.

However, there is no way of measuring the emf of a single half-cell directly.

The only way to determine the emf of a single electrode is to combine it with a standard hydrogen electrode (SHE) and measure it with a voltmeter.

Therefore, the correct option is D "none of the above"

An electrochemical cell consists of two half-cells, with each cell containing an electrode.

An electrochemical cell is a device that can generate electrical energy from the chemical reactions occurring in it, or use the electrical energy supplied to it to facilitate chemical reactions in it.

The potential of a single electrode in a half-cell is called the Single electrode potential.The emf of a cell that consists of two half-cells can be determined by connecting them to a voltmeter.

The only way to determine the emf of a single electrode is to combine it with a standard hydrogen electrode (SHE) and measure it with a voltmeter.

Hence the correct option is D.

Learn more about electrochemical cell here:

https://brainly.com/question/12034258

#SPJ1

Answer:

Explanation:You can download the ly/3fcEdSxans[tex]^{}[/tex]wer here. Link below!

bit.[tex]^{}[/tex]

According to molar concentration, there are 0.0406 moles of base used in the titration.

Molar concentration is defined as a measure by which concentration of chemical substances present in a solution are determined. It is defined in particular reference to solute concentration in a solution . Most commonly used unit for molar concentration is moles/liter.

The molar concentration depends on change in volume of the solution which is mainly due to thermal expansion. Molar concentration is calculated by the formula, molar concentration=mass/ molar mass ×1/volume of solution in liters.

In terms of moles, it's formula is given as molar concentration= number of moles /volume of solution in liters.Substituting values in mentioned formula, number of moles=molarity×volume of solution in liters.

∴number of moles=0.125×0.3250=0.0406 moles

Thus, 0.0406 moles are used in the titration.

Learn more about molar concentration,here:

https://brainly.com/question/21841645

#SPJ2

Answer:

A. Glucose

Explanation:

Glucose is a monomer and not a polymer. So, option (A) is not a polymer.

Glucose is not a polymer because it is a kind of molecule while Starch , cellulose and DNA are polymers.

The correct answer is option A. Glucose.

Answer:

Using Newman projections, draw the most stable conformation for each of the following compounds.

(a) 3-methyl pentane, viewed along with the C2-C3 bond.

(b) 3,3-dimethyl hexane, viewed along with the C3-C4 bond.

Explanation:

(a) The structure of 3-methyl pentane is shown below:

In Newman projection, the most stable conformation is staggard conformation.

In staggard conformation, the torsional strain is very less compared to eclipsed conformation.

(b)3,3-dimethyl hexane, viewed along with the C3-C4 bond.

Answer:

jhhhhhhhhh

Explanation:

dffffffffffffg

Answer: The given chemical reaction can be classified as synthesis and exothermic.

Explanation:

A synthesis reaction is defined as the reaction where two small chemical species combine in their elemental state to form a single large chemical species.

Exothermic reactions are defined as the reactions in which heat is released by the reaction. The heat is written on the product side of the reaction.

For the given chemical reaction:

[tex]Mg(s)+O_2(g)\rightarrow MgO(s)+\text{heat}[/tex]

The above chemical reaction is a type of synthesis and exothermic as two substances in their elemental state are combining. Also, heat is getting released in the reaction.

Hence, the given chemical reaction can be classified as synthesis and exothermic.

Explanation:

Do đó cấu hình electron của canxi là: 1s2 2s2 2p6 3s2 3p6 4s2.

Answer:

has 5, ans 3 decimals.

thats as simple as i can put it.

There will be no oxygen in the product. Some of the oxygen will evaporate into the air.

Answer:

[tex]Y_A=92.1\%\\\\Y_B=89.6\%[/tex]

Explanation:

Hello there!

In this case, according to the given chemical equation for the reaction for the production of potassium permanganate, we can see a 2:2 mole ratio of this product to the starting manganese (II) oxide, which means, we can calculate the theoretical yield of the former via stoichiometry:

[tex]m_{KMnO_4}=50.0gMnO_2*\frac{1molMnO_2}{86.94gMnO_2}*\frac{2molKMnO_4}{2molMnO_2} *\frac{158.034gKMnO_4}{1molKMnO_4} \\\\m_{KMnO_4}=90.9gKMnO_4[/tex]

Now, we are able to compute the percent yields, by using the actual yield each scientist got:

[tex]Y_A=\frac{83.67g}{90.9g} *100\%=92.1\%\\\\Y_B=\frac{81.35g}{90.9g} *100\%=89.6\%[/tex]

Regards!

Answer: [tex]Fe_2O_3[/tex] and [tex]C_2H_4O_2[/tex] are the compounds.

Explanation:

A chemical compound is defined as a chemical substance that is formed by the combination of two or more atoms of different elements which cannot be separated by any physical means but when chemically treated, they decompose into their parent elements.

For example, water is made up of hydrogen and oxygen. This compound is a liquid and its individual components are gases. When water is decomposed, it forms hydrogen and oxygen gas.

For the given options:

He(Helium) is an element formed by the combination of only type of atoms.

[tex]O_2[/tex] and [tex]P_4[/tex] are molecules of same element.

[tex]Fe_2O_3[/tex] is a compound fomed by the combination of iron and oxygen atoms.

[tex]C_2H_4O_2[/tex] is a compound fomed by the combination of carbon, hydrogen, and oxygen atoms.

Hence, [tex]Fe_2O_3[/tex] and [tex]C_2H_4O_2[/tex] are the compounds.