Answer:
a. 2
b. x^2 + 10x + 26
c. x^2 + 2x + 2
Step-by-step explanation:
For each part, replace x with the value you are given and simplify.
f(x) = x^2 - 2x + 2
a.
f(2) = 2^2 - 2(2) + 2 = 2
b.
f(x + 6) = (x + 6)^2 - 2(x + 6) + 2
= x^2 + 12x + 36 - 2x - 12 + 2
= x^2 + 10x + 26
c.
f(-x) = (-x)^2 - 2(-x) + 2
= x^2 + 2x + 2
How many solutions does the following equation have ?
−3x+9−2x=−12−5x
[tex]\text{Solve for x:}\\\\-3x+9-2x=-12-5x\\\\\text{Combine like terms}\\\\-5x+9=-12-5x\\\\\text{Add 5x to both sides}\\\\9=-12\\\\\text{Since that's not valid, there would be no solutions}\\\\\boxed{\text{No solutions}}[/tex]
Determine whether the sequence converges or diverges. If it converges, find the limit. (If an answer does not exist, enter DNE.)
an = (−3^n)/(4n!)
Answer:
[tex]a_{i} = \frac{(-3)^{i}}{4\cdot i!}[/tex] converges.
Step-by-step explanation:
The convergence analysis of this sequence is done by Ratio Test. That is to say:
[tex]r = \frac{a_{n+1}}{a_{n}}[/tex], where sequence converges if and only if [tex]|r| < 1[/tex].
Let be [tex]a_{i} = \frac{(-3)^{i}}{4\cdot i!}[/tex], the ratio for the expression is:
[tex]r =-\frac{3}{n+1}[/tex]
[tex]|r| = \frac{3}{n+1}[/tex]
Inasmuch [tex]n[/tex] becomes bigger, then [tex]r \longrightarrow 0[/tex]. Hence, [tex]a_{i} = \frac{(-3)^{i}}{4\cdot i!}[/tex] converges.
Given a population with a mean of µ = 100 and a variance of σ2 = 1600, the central limit theorem applies when the sample size is n ≥ 25. A random sample of size n = 50 is obtained. • What are the mean and variance of the sampling distribution for the sample means? • What is the probability that ¯X > 110?
Answer:
The probability that the sample mean is more than 110 is 0.0384.
Step-by-step explanation:
According to the Central Limit Theorem if we have an unknown population with mean μ and standard deviation σ and appropriately huge random samples (n > 30) are selected from the population with replacement, then the sampling distribution of the sample mean will be approximately normally distributed.
Then, the mean of the sampling distribution of sample mean is given by:
[tex]\mu_{\bar x}=\mu[/tex]
And the variance of the sampling distribution of sample mean is given by:
[tex]\sigma^{2}_{\bar x}=\frac{\sigma^{2}}{n}[/tex]
The information provided is:
[tex]n=50\\\\\mu=100\\\\\sigma^{2}=1600[/tex]
Since n = 50 > 30, the central limit theorem can be applied to approximate the sampling distribution of sample mean by the normal distribution.
The mean variance of the sampling distribution for the sample mean are:
[tex]\mu_{\bar x}=\mu=100\\\\\sigma^{2}_{\bar x}=\frac{\sigma^{2}}{n}=\frac{1600}{50}=32[/tex]
That is, [tex]\bar X\sim N(100, 32)[/tex].
Compute the probability that the sample mean is more than 110 as follows:
[tex]P(\bar X>110)=P(\frac{\bar X-\mu_{\bar x}}{\sigma_{\bar x}}>\frac{110-100}{\sqrt{32}})[/tex]
[tex]=P(Z>1.77)\\=1-P(Z<1.77)\\=1-0.96164\\=0.03836\\\approx 0.0384[/tex]
*Use a z-table.
Thus, the probability that the sample mean is more than 110 is 0.0384.
For a given confidence level, t ? df is larger than z ? . Explain how t ∗ df being slightly larger than z ∗ affects the width of the confidence interval.
Answer:
Answer is below
Step-by-step explanation:
The width of the CI is directly proportional to critical value. When t* is greater than z value, the t value would then cause the margin of error to be larger and this will in turn cause the width of the confidence interval to be larger.
Greater t*df than z* gives us a bigger margin of error. This would in turn give bigger width of confidence interval. t distribution has greater width confidence interval compared to z distribution.
The width of confidence interval is a function of the margin of error. If the critical value of t(t*) is slightly larger than the critical value of z(z*), then the width of the confidence interval will be larger.
The margin of error is the product of the critical value and the standard error. Therefore, given the same standard error value, the value of the margin of error will increases based on the value of the critical value.
Since, t* is slightly larger than z*, then the confidence interval, t will be wider.
Learn more : https://brainly.com/question/18405415
State whether the data described below are discrete or continuous, and explain why.
The widths (in centimeters) of different paintings in an art museum
nothing
Choose the correct answer below.
A. The data are continuous because the data can only take on specific values.
B. The data are discrete because the data can only take on specific values.
C. The data are discrete because the data can take on any value in an interval.
D. The data are continuous because the data can take on any value in an interval.
2. Imagine you are one of the people who left the luncheon with a contagious disease and interacted with an average of 9 different people each day. How many people could potentially be infected in 7 days
Answer:
63 people.
Step-by-step explanation:
If you have a contagious disease and met with 9 different people each day for 7 days, that'll be 63 people that have gotten infected. 9 x 7 = 63. Hope this helps you!
Find 0.01 more than 9.154
Answer:
Hey!
Your answer is 9.164!!
Step-by-step explanation:
Adding 0.01 means just adding 1 to THE DIGIT IN THE HUNDRETH PLACE...2 SPACES RIGHT OF DECIMAL POINT!
5+1=6
SUB IN:
9.164
Solve the following equation algebraically:
3x^2=12
a.+3
b. +2
C.+3.5
d. +1.5
Answer:
Step-by-step explanation:
answer is c just took test
Rational equation of 3/x+1=2/x-3
Answer:
x = 11
Step-by-step explanation:
3/x+1=2/x-3
Solve by using cross products
2 (x+1) = 3 (x-3)
Distribute
2x+2 = 3x-9
Subtract 2x
2x+2-2x = 3x-2x-9
2 = x-9
Add 9 to each side
2+9 =x-9+9
11 =c
A racecar is traveling at a constant speed of 150 miles per hour. How many feet does it travel in 5 seconds? Remember that 1 mile is 5280 feet.
Answer:
distance covered in 5 seconds
= 1.4283 *10^10 feet
Step-by-step explanation:
A racecar is traveling at a constant speed of 150 miles per hour.
One mile = 5280 feet
150 miles= 5290*150
150 miles= 793500 feet
A racecar is traveling at a constant speed of 793500 feet per hour.
Converting 793500 feet per hour to feet per seconds .
793500 feet per hour
= 793500*60*60 feet per seconds
=2856600000 feet per second
In 5 seconds , distance covered
= 2856600000 *5
distance covered in 5 seconds
= 1.4283 *10^10 feet
The length of a rectangle is twice its width. If the perimeter of the rectangle is 30m, find its area.
Answer:
If the perimeter of the rectangle is 30cm , find its area. W=5 FOR THE WIDTH. 5*10=50 FOR THE AREA.
Step-by-step explanation:
The area of the Rectangle is 50 sq.m
What is the formula of Area of Rectangle?The area of rectangle for a rectangle of length L and width W is given by
A = L* W
It is measured in square units.
Let the length of the rectangle be L
The width of the rectangle is W
The length of a rectangle is twice its width
L = 2W
Perimeter of the Rectangle is 2( Length + Width)
30 = 2 (L +W)
15 = L + W
15 = 2W +W
15 = 3W
W = 5m
L = 10m
The area of the rectangle is Length * Width
Area = 10 *5
Area = 50 sq.m
To know more about Area of Rectangle
brainly.com/question/20693059
#SPJ2
In order to study the mean blood pressure of people in his town, Richard samples the population by dividing the residents by age and randomly selecting a proportionate number of residents from each age group. Which type of sampling is used?
a. Convenience sampling
b. Cluster sampling
c. Stratified sampling
d. Systematic sampling
Answer:
C Stratified sampling
Step-by-step explanation:
Stratified sampling : Stratified sampling is a type of sampling technique in which the total population is divided into smaller groups or strata to complete the sampling process. The strata is formed based on some common characteristics in the data of the population.
One of the advantage of stratified random sampling is that it covers important population characteristics in the sample.
Translate the statements into a confidence interval for p. Approximate the level of confidence. In a survey of 8451 U.S. adults, 31.4% said they were taking vitamin E as a supplement. The survey's margin of error is plus or minus 1%.
Answer:
The confidence interval is [tex]0.304 < p < 0.324[/tex]
Step-by-step explanation:
From the question we are told
The sample proportion [tex]\r p = 0.314[/tex]
The margin of error is [tex]E = 0.01[/tex]
The confidence interval for p is mathematically represented as
[tex]\r p - E < p < \r p + E[/tex]
=> [tex]0.314 - 0.01 < p < 0.314 + 0.01[/tex]
=> [tex]0.304 < p < 0.324[/tex]
Answer two questions about Equations A and B: A.5x=20 \ B.x=4 1) How can we get Equation B from Equation A? Choose 1 answer: (Choice A) Multiply/divide both sides by the same non-zero constant (Choice B,) Multiply/divide both sides by the same variable expression (Choice C) Add/subtract the same quantity to/from both sides (Choice D) Add/subtract a quantity to/from only one side
Answer:
Multiply/divide both sides by the same non-zero constant
Step-by-step explanation:
5x = 20
Divide each side by 5
5x/5 = 20/5
x = 4
To obtain (B) from (A) "Multiply/divide both sides by the same non-zero constant"
Given the equations :
5x = 20 ___ (A)x = 4 _____ (B)To obtain the value ; x = 4 from A
We multiply (A) by the same non-zero constantHere, the constant value which can be used is 5 in other to isolate 'x'
5x/5 = 20/5
x = 4
Therefore, to obtain (B) from (A) "Multiply/divide both sides by the same non-zero constant"
Learn more on equations :https://brainly.com/question/2972832
#SPJ6
Pablo rented a truck for one day. There was a base fee of $19.99, and there was an additional charge of 80 cents for each mile driven. Pablo had to pay
$221.59 when he returned the truck. For how many miles did he drive the truck?
Answer:
252 miles
Step-by-step explanation:
19.99 + .80x = 221.59
,80x = 201.60
x = 252
Mathematical induction is:
Answer:
The third option.
Step-by-step explanation:
Mathematical induction is a 2 step mathematical technique which is used to prove a statement, a formula or a theorem is true for every natural number.
Step 1 (Base step) - It proves that a statement is true for the initial value.
Step 2 (Inductive step) - It proves that if the statement is true for the nth iteration (or number n), then it is also true for (n + 1)th iteration (or number n + 1)
Hope this helps.
Please mark Brainliest.
Answer:
A method of improving statments
Step-by-step explanation:
"Mathematical Induction is a mathematical technique which is used to prove a statement, a formula or a theorem is true for every natural number."
Bob cycles 5.4 km every morning.how many feet are in 5.4 km, given that 1 mile=1.609 km and 1 mile=5,280 feet?
Answer:
17,720 ft
Step-by-step explanation:
5.4 km * (1 mile)/(1.609 km) * (5280 ft)/(1 mile) = 17,720 ft
What is the minimum sample size required to estimate a population mean with 90% confidence when the desired margin of error is 1.25
Complete Question
What is the minimum sample size required to estimate a population mean with 90% confidence when the desired margin of error is 1.25? The standard deviation in a pre-selected sample is 7.5
Answer:
The minimum sample size is [tex]n =97[/tex]
Step-by-step explanation:
From the question we are told that
The margin of error is [tex]E = 1.25[/tex]
The standard deviation is [tex]s = 7.5[/tex]
Given that the confidence level is 90% then the level of significance is mathematically represented as
[tex]\alpha = 100 - 90[/tex]
[tex]\alpha =10\%[/tex]
[tex]\alpha =0.10[/tex]
Next we obtain the critical value of [tex]\frac{\alpha }{2}[/tex] from the normal distribution table
The value is [tex]Z_{\frac{ \alpha }{2} } = 1.645[/tex]
The minimum sample size is mathematically evaluated as
[tex]n = \frac{Z_{\frac{\alpha }{2} * s^2 }}{E^2 }[/tex]
=> [tex]n = \frac{1.645^2 * 7.5^2 }{1.25^2 }[/tex]
=> [tex]n =97[/tex]
Which graph has an amplitude of 1/2?
Answer:
Step-by-step explanation:
The only graph shown in the question doesn't have amplitude 1/2. look for a graph of a periodic wave function that has maximum y-value 1/2 (0.5) and minimum y-value 1/2 (0.5), or if it is not oscillating around the x-axis, verifies that the distance between minimum y-value and maximum y-value is "1" (one). This is because the amplitude is half of the peak-to-peak distance.
Look at the attached image as example.
Answer:
Answer is B
Step-by-step explanation:
Did it on Edge
(II) Time intervals measured with a stopwatch typically have an uncertainty of about 0.2 s, due to human reaction time at the start and stop moments.What is the percent uncertainty of a hand-timed measurement of (a) 5.5 s, (b) 55 s, (c) 5.5 min?
Answer:
(a) 36.36%
(b) 0.36%
(c) 0.06%
Step-by-step explanation:
Given that the time intervals measured with a stopwatch have an uncertainty of about 0.2 s.
We want to know what is the percent uncertainty of a hand-timed measurement of:
(a) 5.5 s
Percentage = (0.2/5.5) × 100
≈ 36.36%
(b) 55 s
Percentage = (0.2/55)×100
≈ 0.36%
(c) 5.5 min
5.5 min = 5.5 × 60 s
= 330 s
Percentage = (0.2/330)×100
≈ 0.06%
What is the volume of a sphere, to the nearest cubic inch, if the radius is 16 inches? Use π = 3.14.
Answer:
vol = 17,148 cu. in.
Step-by-step explanation:
vol = 4 / 3 * pi * r³
vol = 4 / 3 *3.14 * 16³
vol = 17,148 cu. in.
Answer:
The answer is
17149 cubic inchesStep-by-step explanation:
Volume of a sphere is given by
[tex]V = \frac{4}{3} \pi {r}^{3} [/tex]
where r is the radius of the sphere
π = 3.14
From the question
r = 16 inches
Volume of the sphere is
[tex]V = \frac{4}{3} (3.14) {16}^{3} [/tex]
V = 17148.586
We have the final answer as
V = 17149 cubic inches to the nearest cubic inch
Hope this helps you
Take thus quote, and embed (introduce) it into a complete sentence: "TV plots
and characters tended to be simple" The author is Ostergaard.
qaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
Answer:
32.8 miles
Step-by-step explanation:
Amy is driving to Seattle. Suppose that the remaining distance to drive (in miles) is a linear function of her driving time (in minutes). When graphed, the function gives a line with a slope of -0.95. See the figure below. Amy has 48 miles remaining after 31 minutes of driving. How many miles will be remaining after 47 minutes of driving?
Answer: The general equation of a line is given as y = mx + c, where m is the slope of the line and c is the intercept on the y axis. Given that the slope is -0.95, substituting in the general equation :
y = -0.95x + c
Amy has 48 miles remaining after 31 minutes of driving, to find c, we substitute y = 48 and x = 31. Therefore:
48 = -0.95(31) + c
c = 48 + 0.95(31)
c = 48 + 29.45
c = 77.45
The equation of the line is
y = -0.95x + 77.45
After 47 minutes of driving, the miles remaining can be gotten by substituting x = 47 and finding y.
y = -0.95(47) + 77.45
y = -44.65 + 77.45
y = 32.8 miles
determine if the following side lengths create an acute,obtuse,or right triangle. a) 20, 21, 28 b) 3, 6, 4 c) 8, 12, 15
Answer:
a) 20, 21, 28 : acute
b) 3, 6, 4 : obtuse
c) 8, 12, 15 : obtuse
Step-by-step explanation:
You can see if a triangle is acute, obtuse, or right using the Pythagorean theorem as follows:
If [tex]a^2+b^2=c^2[/tex] , then the triangle is right.
If [tex]a^2+b^2>c^2[/tex] , then the triangle is acute.
If [tex]a^2+b^2<c^2[/tex] , then the triangle is obtuse.
Solve each to find if the given lengths form an acute, obtuse, or right triangle ( The biggest number is the hypotenuse length, since the hypotenuse is always the longest side in a triangle. This is represented by c):
a) 20, 21, 28
Insert numbers, using 28 as c:
[tex]20^2+21^2[/tex]_[tex]28^2[/tex]
Simplify exponents ([tex]x^2=x*x[/tex]):
[tex]400+441[/tex]_[tex]784[/tex]
Simplify addition:
[tex]841[/tex]_[tex]784[/tex]
Identify relationship:
[tex]841>784[/tex]
The sum of the squares of a and b is greater than the square of c. This triangle is acute.
b) 3, 6, 4
Insert numbers, using 6 as c:
[tex]3^2+4^2[/tex]_[tex]6^2[/tex]
Simplify exponents:
[tex]9+16[/tex]_[tex]36[/tex]
Simplify addition:
[tex]25[/tex]_[tex]36[/tex]
Identify relationship:
[tex]25<36[/tex]
The sum of the squares of a and b is less than the square of c. This triangle is obtuse.
c) 8, 12, 15
Insert numbers, using 15 as c:
[tex]8^2+12^2[/tex]_[tex]15^2[/tex]
Simplify exponents:
[tex]64+144[/tex]_[tex]225[/tex]
Simplify addition:
[tex]208[/tex]_[tex]225[/tex]
Identify relationship:
[tex]208<225[/tex]
The sum of the squares of a and b is less than the square of c. This triangle is obtuse.
:Done.
The correct values are,
a) 20, 21, 28 = Acute
b) 3, 6, 4 = Obtuse
c) 8, 12, 15 = Obtuse
What is mean by Triangle?A triangle is a three sided polygon, which has three vertices and three angles which has the sum 180 degrees.
Given that;
The sides are,
a) 20, 21, 28
b) 3, 6, 4
c) 8, 12, 15
Now,
We know that;
If three sides of a triangle are a, b and c.
Then, We get;
If a² + b² = c², then the triangle is right triangle.
If a² + b² > c², then the triangle is acute triangle.
If a² + b² < c², then the triangle is obtuse triangle.
Here, For option a;
⇒ 20, 21, 28
Clearly, a² + b² = 20² + 21²
= 400 + 441
= 841
And, c² = 28² = 784
Thus, a² + b² > c²
Hence, It shows the acute angle.
For option b;
⇒ 3, 6, 4
Clearly, a² + b² = 3² + 4²
= 9 + 16
= 25
And, c² = 6² = 36
Thus, a² + b² < c²
Hence, It shows the obtuse angle.
For option c;
⇒ 8, 12, 15
Clearly, a² + b² = 8² + 12²
= 64 + 144
= 208
And, c² = 15² = 225
Thus, a² + b² < c²
Hence, It shows the obtuse angle.
Learn more about the triangle visit:
https://brainly.com/question/17335144
#SPJ5
A particular country has total states. If the areas states are added and the sum is divided by , the result is square kilometers. Determine whether this result is a statistic or a parameter.
Answer:
Some texts are missing from the question, I found a possible match, and here it is:
A particular country has total of 45 states. If the areas of 35 states are added and the sum is divided by 35, the result is 135,600 square kilometres. Determine whether this result is a statistic or a parameter.
Answer:
The result is a statistic because the data involved are samples.
Step-by-step explanation:
A Parameter is a numerical representation of an entire population. That is they are numbers summarizing data for an entire population. In this case, if all the 45 states were measured, the result would have been a parameter.
On the other hand, statistics are numbers that are subsets (representative portions) of an entire population. Since 35 states were chosen out of 45 states, the average area of the 35 states is a statistic and not a parameter.
In this diagram, bac~edf. if the area of bac= 6 in.², what is the area of edf? PLZ HELP PLZ PLZ PLZ PLZ
Answer:
Area of ΔEDF = 2.7 in²
Step-by-step explanation:
It's given in the question,
ΔBAC ~ ΔEDF
In these similar triangles,
Scale factor of the sides = [tex]\frac{\text{Measure of one side of triangle BAC}}{\text{Measure of one side of triangle EDF}}[/tex]
[tex]=\frac{\text{BC}}{\text{EF}}[/tex]
[tex]=\frac{3}{2}[/tex]
Area scale factor = (Scale factor of the sides)²
[tex]\frac{\text{Area of triangle BAC}}{\text{Area of triangle EDF}}=(\frac{3}{2})^2[/tex]
[tex]\frac{6}{\text{Area of triangle EDF}}=(\frac{9}{4})[/tex]
Area of ΔEDF = [tex]\frac{6\times 4}{9}[/tex]
= 2.67
≈ 2.7 in²
Therefore, area of the ΔEDF is 2.7 in²
Each corner of a rectangular prism is cut off. Two (of the eight) cuts are shown. How many edges does the new figure have? Assume that the planes cutting the prism do not intersect anywhere in or on the prism. EXPLAIN PLS
Answer:
36
Step-by-step explanation:
Each cut creates a triangular face where the corner used to be. That face adds three edges to the figure. The 8 cuts add a total of 8×3 = 24 edges to the 12 edges the prism already had.
The new figure has 12+24 = 36 edges.
In a random sample of 64 people, 48 are classified as 'successful.' Determine the sample proportion of 'successful' people.
Answer:
The sample proportion of 'successful' people is [tex]\frac{3}{4}[/tex].
Step-by-step explanation:
The sample consist of 64 people and 48 of them are 'successful'. Hence, the proportion of 'successful' people is:
[tex]p = \frac{n}{N}[/tex]
Where:
[tex]N[/tex] - People that forms the sample, dimensionless.
[tex]n[/tex] - People classified as 'successful', dimensionless.
Given that [tex]n = 48[/tex] and [tex]N = 64[/tex], the sample proportion of 'successful' people is:
[tex]p = \frac{48}{64}[/tex]
[tex]p = \frac{3}{4}[/tex]
The sample proportion of 'successful' people is [tex]\frac{3}{4}[/tex].
The average value of a function f(x, y, z) over a solid region E is defined to be fave = 1 V(E) E f(x, y, z) dV where V(E) is the volume of E. For instance, if rho is a density function, then rhoave is the average density of E. Find the average value of the function f(x, y, z) = 5x2z + 5y2z over the region enclosed by the paraboloid z = 9 − x2 − y2 and the plane z = 0.
Answer:
An aluminum bar 4 feet long weighs 24 pounds
Step-by-step explanation:
An operator wants to determine the standard deviation for a machine relative to its ability to produce windshield wipers conforming within their specifications. To do this, she wants to create a p-chart. Over a month's time, she tests 100 units every day and records the number of manufacturing defects. The average proportion of non-conforming windshield wipers is found to be 0.042. What is the standard deviation of this sample
Answer:
the standard deviation of the sample is less than 0.1
Step-by-step explanation:
Given that :
The sample size n = 100 units
The average proportion of non-conforming windshield wipers is found to be 0.042 which is the defective rate P-bar
The standard deviation of the machine([tex]S_p[/tex]) can be calculated by using the formula:
[tex]S_p =\dfrac{ \sqrt{ \overline P \times (1 - \overline P)} }{n}[/tex]
[tex]S_p =\dfrac{ \sqrt{0.042 \times (1 -0.042)} }{100}[/tex]
[tex]S_p =\dfrac{ \sqrt{0.042 \times (0.958)} }{100}[/tex]
[tex]S_p =\dfrac{ \sqrt{0.040236} }{100}[/tex]
[tex]S_p =\dfrac{ 0.2005891323 }{100}[/tex]
[tex]S_p =0.002[/tex]
Thus , the standard deviation of the sample is less than 0.1