How would you describe what would happen to methane if the primary bonds were to break?

Answers

Answer 1

Answer:

All the bonds in methane (CH4CH4) are equivalent, and all have the same dissociation energy.

The product of the dissociation is methyl radical (CH3CH3). All the bonds in methyl radical are equivalent, and all have the same dissociation energy.

The product of that dissociation is methylene (CH2CH2). All the bonds in methylene are equivalent, and all have the same dissociation energy.

The product of that dissociation is methyne (CHCH) .

The C-H bonds in methane do not have the same dissociation energy as C-H bonds in methyl radical, which in turn do not have the same dissociation energy as the C-H bonds in methylene, which are again different from the C-H bond in methyne.

If (by some miracle) you were able to get all four bonds in methane to dissociate absolutely simultaneously, they would all show the same dissociation energy… but that energy, per bond broken, would be different than the energy required to break just one C-H bond in methane, because the products are different.

(In this case, it’s CH4→C+4HCH4→C+4H versus CH4→CH3+HCH4→CH3+H.)

To alter hydrocarbons you add enough energy to break a C-H bond. Why does only one bond break? What concentrates the energy on one C-H bond?

the weakest CH bond is the one that breaks. in plain alkanes it has to do with the molecular orbital interactions between neighboring carbon atoms. look at propane for example. the middle carbon has two C-C bonds, and each of those C-C bonds is strengthened by slight electron delocalization from the C-H bonds overlapping with the antibonding orbitals of the adjacent carbons.

since the C-H bonds on the middle carbon donate electron density to both of its neighbors, those two are weakest.

one of them will break preferentially.

which one actually breaks depends on the reaction conditions (kinetics). frankly it's whichever one ramdomly approaches a nucleophile first. when the nucleophile pulls of one of the H's, the other C-H bonds start to share (delocalize) the negative charge across the whole molecule. so while the middle C feels the majority of the negative charge character, the other two C's take on a fair amount as well...

by the way, alkanes don't really like to break and form anions like that.

a better example would be something like isopropyl iodide, where the C-I bond breaks and the I carries away the electron pair, forming a carbocation (also not particularly stable, but more so than the carbanion).


Related Questions

A O.1m³ rigid tank contains steam initially as 500k pa and 200°C. The steam is now allowed to cool until the temperature drops to 50°C. Determine the amount of heat transfer during the process and the final pressure in the tank​

Answers

Answer:

Check it out here

Explanation:

True or false: You can create a network with two computers.



Answer
True

Answers

To create a computer network, you must have at least two computers. ... A protocol is a standard set of rules and procedures for the control of communications in a network. TRUE. Two computers using TCP/IP can communicate even if they are based on different hardware and software platforms. So your right :)

Hope this helps :)
True u must use two computers

anxiety: a. is never normal. b. is common of many psychological disorders c. is identical to fear d. is a modern development, unlikely to have roots in human history

Answers

Answer:

B

Explanation:

Anxiety is very common especially nowadays but it's especially common in psychological disorders

Work to be performed can come from the work package level of the work breakdown structure as well as other sources. Which of these is NOT a source of authorized work to be performed?

a. Scope creep
b. Defect repairs
c. Preventive actions
d. Corrective actions

Answers

A project is meant to achieve clearly defined goals within present constraints

The correct option for the source of work in a project which is NOT a source of authorized work to be performed is option (a)

a. Scope creep

The reason for the selecting the above option is as follows;

In project management, alongside work planned in a work package, authorized work to be performed can come from;

The repairing of defects found in completed work and which is a requirement for the project to be approvePreventive actions, that are meant to mitigate factors that affect the project timeline and costCorrective actions which include actions meant to rectify parts of the project that produce an error outcome

A scope creep, however, is generally is due to the inclusion of the end

users of the project at a time that is behind schedule, insufficient analysis of

the requirements, and project complexity underestimation. and consists of

changes made after a project has commenced

A scope creep therefore, changes the amount of work to be done which

therefore alters the project timeline, and due to project, budgetary, and

end user constraints, CANNOT be a source of authorized work to be

performed

The correct option for the source that is NOT a authorized work to be performed is option a. Scope creep

Learn more about scope creep here:

https://brainly.com/question/14061926

Which of the following conditions were present in over 80% of paddling fatalities from 1995-2000?

Answers

Answer:

80% of the people that were killed weren't wearing a safety flotation device ( in correct terminology Personal Flotation Device, or PFD )

Explanation:

Hence they drowned due to the lack of safety.

The condition present in over 80% of paddling fatalities is that the victims were said to be not wearing a personal flotation device (PFD).

What is paddling in the sea?

The act of paddling is known to be a sport or something one can do for fun or for games.

Conclusively, a lot of paddling fatalities 1995-2000 was due to the fact that the people who were engage in the sport or act were not putting on  a personal flotation device (PFD) and this can lead to death or drowning.

Learn more about  paddling fatalities from

https://brainly.com/question/3787626

A steam turbine generator unit is used to produce electricity, where steam enters the turbine with a velocity of 30 m/s and enthalpy (internal energy) of 3348 kJ/kg. The 1 steam leaves the turbine as a mixture of vapor and liquid having a velocity of 60 m/s and an enthalpy of 2550 kJ/kg. The flow through the turbine is adiabatic, and changes in elevation are negligible. Determine the work output from the turbine, if the mass flow rate is 5kg/s.

Answers

Answer:

3.983 MW

Explanation:

Given that:

At the inlet:

Velocity (v₁) = 30 m/s

Enthalpy (h₁) = 3348 kJ/kg

At the outlet:

Velocity (v₂) = 60 m/s

Enthalpy (h₂) = 2550 kJ/kg

Mass flow rate (m) = m₁ = m₂ = 5kg/s

According to the steady flow energy equation:

[tex]Q+ m_1 (h_1 + \dfrac{v_1^2}{2000}+ \dfrac{gz_1}{1000} )= m_2(h_2+\dfrac{v_2^2}{2000}+\dfrac{gz_2}{1000})+W_{shaft}[/tex]

Since the elevation (z) is negligible and flow via the turbine is adiabatic:

Then,

Q = 0 and z₁ = z₂

[tex]W_{shaft} = (mh_1-mh_2) + (\dfrac{mv_1^2-mv_2^2}{2000})[/tex]

[tex]W_{shaft} = ((5*3348) -(5*2550)) + (\dfrac{(5*(30)^2)-(5*(60)^2)}{2000})[/tex]

[tex]W_{shaft} = (16740-12750) + (\dfrac{4500-18000}{2000})[/tex]

[tex]W_{shaft} = (16740-12750) + (-6.75)[/tex]

[tex]W_{shaft} = 3983.25 \ kW[/tex]

[tex]\mathbf{W_{shaft} = 3.983 \ MW}[/tex]

số bit của pic 16f887

Answers

Answer:

what does it mean

Explanation:

sorry

plz write in English

Suppose we have 999 records of employees Emp1, Emp2, Emp5, Emp6 and so on up to Emp998 and Emp999 stored in a sequence. Hence, records are nothing but a row in the table. In the employee table, we want to insert new records Emp3 and Emp4 in the sequence, and once we have done insertion we need to update and retrieve the record efficiently to optimize the performance of a database by minimizing the access time when query is being executed.

Answers

The records in the table represents the employee ID of each employee. Assume the table name is EMPLOYEES and the field name of employee IDs is ID, the following SQL query inserts Emp3 and Emp4 into the employees table.

INSERT INTO EMPLOYEES (ID) values (Emp3), (Emp4)

The complete question requires that we list the pros and cons of solving the problem using Index sequential access method (ISAM).

The advantage of using ISAM is that priorities are given to the indices of the records being inserted. So, Emp3 and Emp4 will be inserted immediately after Emp2.

However, a major disadvantage of using ISAM is that it is very expensive to keep the indices in a sequential order;

See attachment for the illustration of Index sequential access method (ISAM).

Read more about Index sequential access method (ISAM) at:

https://brainly.com/question/4692093

Magnetic particle testing can be done only on metals that can be magnetized.
True or false

Answers

the answer to this it true

Why is logging done during drilling?

Answers

Answer:

Logging while drilling (LWD) is a technique of conveying well logging tools into the well borehole downhole as part of the bottom hole assembly (BHA). ... In these situations, the LWD measurement ensures that some measurement of the subsurface is captured in the event that wireline operations are not possible

There are some sections of the SDS that are not mandatory

True or false

Answers

Answer:

True

Explanation:

There are 16 in all and 4 are not mandatory

There are some sections of the SDS that are not mandatory. Thus, option A is correct.

What is SDS?

A Safety Data Sheet, previously known as a Material Safety Data Sheet, is a thorough instructional report written by a dangerous product's producer or exporter. It gives a description of something like the product's chemical and physical characteristics.

Sections 1 through 11 and 16 must be used; sections 12 through 15 are optional but could be included. the section which will are not compulsory are:

Section 12: Environmental data

Section 13: Guidelines for Recycling

Section 14: Documentation regarding mobility

Section 15: Relevant data about regulations

In Safety Data Sheet, all the sections are not compulsory or mandatory. this statement is true. Therefore, option A is the correct option.

Learn more about Safety Data Sheet, here:

https://brainly.com/question/1442958

#SPJ2

prove that Sin^6 ϴ-cos^6ϴ=(2Sin^2ϴ-1)(cos^2ϴ+sin^4ϴ) please sove step by step with language it is opt maths question guys i willl give you 100 point and mark as brainlest answer​

Answers

By using basic trigonometric identity.....

what does mean setbacks with MRT station?

Answers

The term “setback” refers to the distance (measured in feet) a house or structure must be from the front, side and rear property lines. Setbacks allow for access to underground utilities and distance between properties.

If a corporation is socially responsible, it will develop and implement a sustainability plan and communicate it to stakeholders.

True
False

Answers

Answer:

True

Explanation:

All big companies are pretty much required in today's day and ages to complete these reports whether they truly believe it.

if a person is injured at the hospital during a natural disaster a correct action to take is ​

Answers

first check that you and the casualty aren't in any danger. If you are, make the situation safe. When it's safe to do so, assess the casualty and, if necessary, dial 999 or 112 for an ambulance. You can then carry out basic first aid and shift to another hospital




That’s what I learnt sooo..

Troy must keep track of the amount of refrigerant he uses from a 50-pound cylinder to ensure that accurate
records are kept. He used 13 pounds on a systein for Ms. Jones and 9 pounds on a system for a commercial
client. How many pounds should he have left in the cylinder?
tof
Troy should have
pounds of refrigerant left in the cylinder.
baon naid Thamar basic
محمود احمد مجد
12
اهداء ما در

Answers

Answer:

Amount of gas still in cylinder = 28 pound

Explanation:

Given:

Amount of gas in cylinder = 50 pound

Amount of gas used in Ms. Jones system = 13 pound

Amount of gas used in client system = 9 pound

Find:

Amount of gas still in cylinder

Computation:

Amount of gas still in cylinder = Amount of gas in cylinder - Amount of gas used in Ms. Jones system - Amount of gas used in client system

Amount of gas still in cylinder = 50 - 13 - 9

Amount of gas still in cylinder = 28 pound

Side milling cutter is an example of ______ milling cutter.

Answers

Answer:

special type

Explanation:

As per the classification of milling cutters. This cutter can handle deep and long open slots in a more comfortable manner, which increase the productivity.

A mechanic claims to have developed a car engine that runs on water instead of gasoline. What is your response to this claim?​

Answers

The claim will be impractical. The reason behind this is provided below throughout the explanation segment.

Inside the same combustion chamber, fresh water can't be pressurized even more than fuel as well as air. Consequently, the cylinder does not burn due to a problem with the compressor.To accomplish the development processes, a machine requires any sort of combustible which might cause combustion as well as create a tremendous quantity of power.

Thus, the idea of using water instead of petroleum appears unworkable throughout traditional engines.

Learn more:

https://brainly.com/question/4067583

You are given a pot of hot tea (350 mL) at a temperature of 85°C and a quantity of ice at -12°C. Determine the absolute minimum amount of ice you can add to the hot tea so that at equilibrium you have iced tea (ie. a very, very small amount of ice and some water). You can assume tea has the same density (1.00 g/mL) and specific heat (4190 J/kgK) as liquid water. The heat of fusion of H2O is 3.33x10^5 J/kg. The specific heat of ice is 2090 J/kgK.

Answers

Answer:

348 g

Explanation:

The heat gained by the ice equals the heat lost by the hot tea.

Also, since we require a very, very small amount of ice and some water, to still have some ice, the temperature of the hot tea has to decrease to the melting point of ice which is 0°C. So, the final temperature of the mixture is 0 °C.

So, mc(T - T') + mL = -MC(T - T") where m = mass of ice, c =  specific heat of ice = 2090 J/kgK., T = final temperature of mixture = 0 °C, T' = initial temperature of ice = -12 °C, L = heat of fusion of H2O = 3.33 × 10⁵ J/kg, M = mass of hot tea = ρV where ρ = density of tea = 1.00 g/mL and V = volume of hot tea = 350 mL. So, M = ρV = 1.00 g/mL × 350 mL = 350 g = 0.350 kg, C = specific heat of tea = 4190 J/kgK and T" = initial temperature of tea = 85 °C.

Making m subject of the formula, we have

mc(T - T') + mL = -MC(T - T")

m[c(T - T') + L] = -MC(T - T")  

m = -MC(T - T")/[c(T - T') + L]

substituting the values of the variables into the equation, we have

m = -MC(T - T")/[c(T - T') + L]

m = -0.350 kg × 4190 J/kgK(0 °C - 85 °C.)/[2090 J/kgK(0 °C. - (-12 °C)) + 3.33 × 10⁵ J/kg]

m = -1466.5 J/kK(- 85 °C)/[2090 J/kgK(0 °C + 12 °C)) + 3.33 × 10⁵ J/kg]

m = 124652.5 J/[2090 J/kgK(12 °C) + 3.33 × 10⁵ J/kg]

m = 124652.5 J/[25080 J/kg + 3.33 × 10⁵ J/kg]

m = 124652.5 J/358080 J/kg

m = 0.3481 kg

m = 348.1 g

m ≅ 348 g

So, the minimum amount of ice to be added is 348 g.

What is the following diagram called?

Answers

Answer:

flow chart

Explanation:

it's a flow chart right ? don't know the explanation cause I am not even sure I am right

Hydraulic fracturing is: Select one: a. a first step in storage of high-level radioactive waste b. a way of extracting natural gas shale formations c. a step in oil refining where oil is separated into different viscosities d. none of the above

Answers

The answer is B - a way of extracting natural gas shale formations.

Hydraulic fracturing is “a way of extracting natural gas shale formations.”

Shale and other types of "tight" rock, or impermeable rock formations that lock in oil and gas and complicate the production of fossil fuels, can be extracted of their natural gas or oil using the modern high-volume hydraulic fracturing process. Thus, option B is correct.

What are the factor involving in Hydraulic fracturing?

Shale gas is extracted through a procedure called hydraulic fracturing, also referred to as “fracking.” Due to the fact that shale reserves are often dispersed horizontally rather than vertically, deep holes are first drilled into the shale rock, then horizontal drilling is used to reach more of the gas.

A mixture of sand, chemicals, and water is pushed at high pressure down a borehole during hydraulic fracturing. The released gas can flow out of the rocks and back up the borehole because the water pressure causes cracks in the rock to widen, and the sand particles settle into the openings to keep them open.

Therefore, a way of extracting natural gas shale formations.

Learn more about Hydraulic fracturing here:

https://brainly.com/question/28559289

#SPJ2

Uses of P-N junction

Answers

Answer:

Explanation:

Two that come to mind:

a semiconductor diode is essentially a PN junctiona transistor is made of two pn junctions.

Which tool is used to measure movement automotive

Answers

Answer:

Speedometer

It shows our speed, or how fast we're moving.

answer this qustion plz

Answers

Answer:

click here and I'm so happy I have been doing this weekend I can see the same way you could come back in a bit and then we are all of you to know you do for a bit of time with me or

. Bơm kiểu piston tác dụng đơn có áp suất p=0,64 Mpa và lưu lượng Q=3,5 l/s. Xác định tốc độ quay của trục bơm và công suất của bơm nếu biết đường kính piston D=150 mm; bán kính tay quay R=60 mm; hiệu suất thể tích của bơm là 0=0,94; hiệu suất chung của bơm b=0,80.

Answers

Answer:

not understand language

there are many different values associated with an AC sine wave which one of the following continually changes throughout the cycle?

A. instantaneous value
b. effective value
c. peak value
d. average value​

Answers

A. The instantaneous value (of voltage for sure and also possibly of current) continually changes thought the cycle.

Sine waves are by far the most common type of alternating current waveform employed in electrical engineering. The correct option is A.

What are Sine Waves?

Sine waves are by far the most common type of alternating current waveform employed in electrical engineering. An AC Waveform is the shape formed by charting the instantaneous ordinate values of either voltage or current against time.

There are many different values associated with an AC sine wave but the one that continually changes throughout the cycle is the instantaneous value.

Hence, the correct option is A.

Learn more about Sine Wave:

https://brainly.com/question/14979785

#SPJ2

hỗ trợ mình với được không các bạn

Answers

Answer:

Explanation:

Be bop

Rafel knows that lessons learned is a valuable aid to future projects. When should he and his team address
lessons learned on a project?
Select an answer:
Add lessons learned as a topic in status meetings
Review past lessons learned so a new one does not have to be created,
Create lessons learned at the end of the project.
Brainstorm lessons learned at the beginning of a project

Answers

Answer: Create lessons learned at the end of the project.

Explanation:

Lessons learned are the experiences that are gotten from a project which should be taken into account for the future projects. Lesson learned are created at the end of the project.

The main objective of the lessons learned is that they show both the positive experience and the negative experience of a project and this will help the future projects that will be undertaken.

What is the following diagram called?

Answers

Answer:

business

Explanation:

because shopping has great income

Answer:

is ur question right

Explanation:

is ur question right

is ur question right

an atom that gained an electron is called​

Answers

Answer:

Hey mate......

Explanation:

This is ur answer.....

When an atom gains/loses an electron, the atom becomes charged, and is called an ion.

Hope it helps!

Brainliest pls!

Follow me :)

An atom that gained an electron is called an ION.
Other Questions
Help me, pleaseHelp me, please Which was the first American military unit dedicated to aviation? A cab company changes a 3$ flat rate addition to $1.50 per mile what is the y Intercept? Why does Edwards use the word provoked instead of the word angered in this passage?The word provoked suggests that Gods anger is fierce and irrational.The word provoked suggests that sinners bear responsibility for Gods anger.The word provoked suggests that Gods anger is sharp and deadly.The word provoked suggests that sinners do not want to change their ways. A gas sample containing a constant number of gas molecules has a volume of 2.70 L at a constant pressure and a temperature of 25.0o C. What would be the volume (in Liters) of this gas sample at 75.0o C? Round your answer to 3 sig fig How many crores are there in 20 million? please answer the question below! first to answer correctly, I will mark as brainliest. A salesman, after deducting his commission of6%, remits $2491 to his company. The grossamount of the sale amounted to(A)$2809(B) $2650(C) $2640(D) $2341.54 I need help with this what is 11/12 divide 1/3 no simplify please help i need to pass summer school PLEASE HELPP!!!PLEASE HELP!!!Write the sentences in your copybook and draw a line through one of the words inbold to complete each of these sentences about alkali metals correctly. Alkali metals generally become more / less dense going down the group. The melting and boiling points of alkali metals increase / decrease down the group. The softness of alkali metals increases / decreases going down the group. The speed with which alkali metals react with oxygen increases / decreases goingdown the group. Briefly describe any two ways in which time affects soil formation what happens when transitioning between photosynthesis and cellular respiration? What is the final step in the fourth stage of technological design, after a product has been improved abs approved PLEASE HELP!!!The distance d of a particle moving in a straight line is given by d(t) = 2t^3 + 5t 2, where t is given in seconds and d is measured in meters.Find the velocity of the particle for t = 7 seconds.A) 152 m/sB) 47 m/sC) 733 m/sD) 299 m/s Write a paragraph on 'What you would expect as help if it happens that you are in serious trouble' Find BD , given that line AB is the angle bisector of Using a deck of 52 playing cards, what are the odds in favor of drawing a Jack or 10? solve the equation r-4s+s=8r+2s=28 Para que se emplean los subproductos de las cosechas?