How to distinguish between ethanol and 2 -methyl-2-propanol

Answers

Answer 1

Answer:

There are many reagents.

1. Use acidified potassium permanganate solution

2. Use acidified potassium dichromate solution

3. Fehling solution.

4. Silver/ oxygen at 500°C

5. Copper/ oxygen at 300°C

6. Lucas reagent ( anhydrous zinc and conc. hydrochloric acid)

Explanation:

Observations:

[with acidified potassium permanganate solution]

» Ethanol : The purple solution turns colourless.

» 2-methyl-2-propanol : no observable change.

[with acidified potassium dichromate solution]

» Ethanol : orange solution turns green

» 2-methyl-2-propanol : no observable change.

[Fehling solution]

» Ethanol : a white precipitate is formed

» 2-methyl-2-propanol : no observable change


Related Questions

When equal moles of an acid and a base are mixed, after reaction the two are compounds are said to be at the _______________. Select one: Indicator point Stoichiometric point Equilibrium point End point

Answers

Answer:

when equal moles of an acid and base are mixed,after reaction the two are compounds are said to be at the Equivalent point.

If the balance were not tared prior to weighing out the KHP.... how would you expect this to affect the molarity of NaOH calculated? What type of error is this?

Answers

Answer:

Following are the response to the given question:

Explanation:

In the given scenario, When the balance has never been tainted before the KHP is weighted, which can affect the molar concentration of NaOH because its molarity is directly proportional to the weight including its substance. In this question it is the mistake is systemic because it may be corrected by modifying balancing parameters.

A/An is a type of blood cell that's also called a red blood cell. a) Jeukocyte O b) thrombocyte c) plasma d) erythrocyte

Answers

Answer:

option a

Explanation:

pls mark me as brainliest

In the reoxidation of QH2 by purified ubiquinone-cytochrome c reductase (Complex III) from heart muscle, the overall stoichiometry of the reaction requires 2 mol of cytochrome c per mole of QH2 because:

Answers

Answer: Options related to your question is missing below are the missing options

a. cytochrome c is a one-electron acceptor, whereas QH2 is a two-electron donor.

b. cytochrome c is a two-electron acceptor, whereas QH2 is a one-electron donor.

c. cytochrome c is water soluble and operates between the inner and outer mitochondrial membranes

d. heart muscle has a high rate of oxidative metabolism, and therefore requires twice as much cytochrome c as QH2 for electron transfer to proceed normally.

e. two molecules of cytochrome c must first combine physically before they are catalytically active.

answer:

cytochrome c is a one-electron acceptor, whereas QH2 is a two-electron donor. ( A )

Explanation:

The overall stoichiometry of the reaction requires 2 mol of cytochrome per mole of QH2 because a cytochrome is simply a one-electron acceptor while QH2 is not a one-electron donor ( i.e. it is a two-electron donor )

An electron donor in a reaction is considered a reducing agent because it donates its electrons to another compound thereby self oxidizing itself in the process.

To prepare a standard (calibration) curve for a spectroscopy experiment, start by preparing ___________ with ______________ Then, measure the ______________ of each solution at _____________ and create a plot of ____________ for the measured values. Finally, find the best-fit line of the data set.

Answers

Answer: See explanation

Explanation:

The calibration curve is the method used for the determination of the concentration of a substance such that the unknown sample will be compared to some standard samples of the known concentration.

To prepare a standard (calibration) curve for a spectroscopy experiment, start by preparing (multiple solutions) with (different known concentrations). Then, measure the (absorbance) of each solution at (thesame wavelength) and create a plot of (absorbance vs. concentration) for the measured values. Finally, find the best-fit line of the data set.

At what velocity (m/s) must a 20.0g object be moving in order to possess a kinetic energy of 1.00J

Answers

Answer:

10 ms-1

Explanation:

Kinetic energy = 1/2 × m × v^2

1 = 1/2× 20 ×10^ -3 × v^2

v ^ 2 = 100

v = 10 ms-1

note : convert grams in to kg before substitution as above

The velocity will be "10 m/s".

Given:

Kinetic energy,

K.E = 1.00 J

Mass,

m = 20.0 g

We know the formula,

→ [tex]K.E = \frac{1}{2} mv^2[/tex]

By putting the values, we get

       [tex]1 = \frac{1}{2}\times 20\times 10^{-3}\times (v)^2[/tex]

     [tex]v^2 = 100[/tex]

       [tex]v = \sqrt{100}[/tex]

       [tex]v = 10 \ m/s[/tex]

Thus the above response is correct.

Learn more about K.E here:

https://brainly.com/question/24997625

The shape of a molecule is determined by:
A. All of these
B. The number of electron clouds around the atom.
C. The number of bonds.
D. Mutual repulsion between electrons.

Answers

By the electron pairs around the central atom. So it’s A

A capsule containing 0.500 L of air at 1.00 atm is compressed to 3.25 atm. At that point, what is the volume of the gas in the capsule?

Answers

Answer:

V₂ = 0.154 Liters

Explanation:

Pressure => P

Volume   => V

Temperature => T

mass (moles) => n

This problem...

P₁ = 1.00 ATM     P₂ = 3.25 ATM

V₁ = 0.500L       V₂ = ?

T₁ =  constant    T₂ = T₁ = constant

n₁ =  constant     n₂= n₁ = constant

P₁V₁/n₁T₁ = P₂V₂/n₂T₂  => V₂ = V₁(P₁/P₂) = 0.500L (1.00ATM/3.25ATM) = 0.154 Liters

The sample concentration was measured at 50mg/ml. The loading concentration needs to be 10mg/ml. The final volume needs to be 25ul. What is the volume of sample needed and the amount of buffer needed to reach 25ul

Answers

Answer:

a)  [tex]V_1=5ul[/tex]

b)  [tex]v=20ul[/tex]

Explanation:

From the question we are told that:

initial Concentration [tex]C_1=50mg/ml[/tex]

Final Concentration [tex]C_2=10mg/ml[/tex]

Final volume needs [tex]V_2 =25ul[/tex]

Generally the equation for Volume is mathematically given by

[tex]C_1V_1=C_2V_2[/tex]

[tex]V_1=\frac{C_1V_1}{C_2}[/tex]

[tex]V_1=\frac{10*25}{50}[/tex]

[tex]V_1=5ul[/tex]

Therefore

The volume of buffer needed is

[tex]v=V_2-V_1\\\\v=25-5[/tex]

[tex]v=20ul[/tex]

What would be the name of this compound?

Answers

Answer:

2,3 Dimethyl hexane

Explanation:

First, start the count from which side is given the CH3 smallest number

first; the longest carbon chain in this compound is 6

and you don't have any double and triple bonds or functional groups so it is Hexane

you start to count from the right side to give the branch molecules the smallest number ..

CH3 = methyl

and you have 2 methyl in this compound ..

and 2 mean you must write ( Di )

you write the name in this way

2,3 Dimethyl hexane

hope this helps you.

stay safe ...

which of the following is is a chemical property of pure water

Answers

Answer:

Pure water has an acidity of about 7 on the pH scale. -is a chemical property of pure water. Pure water has an acidity of about 7 on the pH scale

Answer: không màu , không mùi không vị

Explanation:

GM 2 all ,What is an atom define it .Good Day​

Answers

Answer:

An atom is the smallest particle of an element that can take part in chemical reaction.

Explanation:

hope it will help u Amri

A sample of Kr gas is observed to effuse through a pourous barrier in 8.15 minutes. Under the same conditions, the same number of moles of an unknown gas requires 4.53 minutes to effuse through the same barrier. The molar mass of the unknown gas is ____________ g/mol.

Answers

Answer:

25.88 g/mol

Explanation:

Graham's law is a famous law which states that the diffusion rate or the effusion rate of any gas varies inversely to the square root of the molecular weight the gas.

So from Graham's law, we have,

[tex]$\frac{\text{time}}{M^{1/2}}=\text{constant}$[/tex]

Using the sample of Kr gas having M = 83.8

[tex]$\frac{8.15}{(83.8)^{0.5}}= \frac{4.53}{M^{0.5}}$[/tex]

[tex]$M^{0.5}= 5.088$[/tex]

M = 25.88 g/mol

ort
Which is a primary alcohol?
0 3-pentanol
2-propanol
1-ethanol
4-octanol
urvey
Lig A Moving to another question will save this response.

Answers

Answer:

1 ethanol is right answer

Explanation:

CH3- CH2-OH

does anyone know how to solve this and what the answer would be?

Answers

Dynamic equilibrium is showed at the point at which solid liquid and gas intersect.

At the point at which solid liquid and gas intersect represents a system that shows dynamic equilibrium. There is equal amount of reactants and products at the point of dynamic equilibrium because the transition of substances occur between the reactants and products at equal rates, means that there is no net change. Reactants and products are formed at the rate that no change occur in their concentration.

https://brainly.com/question/24310467

Nitric acid can be formed in two steps from the atmospheric gases nitrogen and oxygen, plus hydrogen prepared by reforming natural gas. In the first step, nitrogen and hydrogen react to form ammonia: N2 (g) + 3H2 (g) â 2NH3 (g) =ÎHâ92.kJ In the second step, ammonia and oxygen react to form nitric acid and water:

NH3 (g) + 2O2 (g) â HNO3 (g) + H2O (g) =ÎHâ330.kJ

Required:
Calculate the net change in enthalpy for the formation of one mole of nitric acid from nitrogen, hydrogen and oxygen from these reactions.

Answers

Answer:

-376 kJ

Explanation:

The first step equation:

[tex]\mathsf{N_{2(g)} + 3H_2{(g)} \to 2NH_3{(g)} \ \ \ \Delta H = -92\ kJ}[/tex]    ---- (1)

The second step equation:

[tex]\mathsf{NH_{3(g)} + 2O_2{(g)} \to HNO_3{(g)} +H_2O_{(g)} \ \ \ \Delta H = -330\ kJ}[/tex]      ---- (2)

To determine the enthalpy of formation for 1 mole of HNO₃ (nitric acid), we have the following.

From the above equations; let multiply equation (1) by 1 and equation (2) by 2.

[tex]\mathsf{N_{2(g)} + 3H_2{(g)} \to 2NH_3{(g)} \ \ \ \Delta H = -92\ kJ}[/tex]     ---- (3)

[tex]\mathsf{2NH_{3(g)} + 4O_2{(g)} \to 2HNO_3{(g)} +2H_2O_{(g)} \ \ \ \Delta H = 2(-330)\ kJ}[/tex]      ----- (4)

adding the above two equations, we have:

[tex]\mathsf{N_{2(g)} + 3H_2{(g)}+ 2NH_{3(g)} + 4O_{2(g)} \to 2HNO_{3(g)} + 2NH_3{(g)} +2H_2O_{(g)} \ \ \ \Delta H = (-660 \ kJ -92\ kJ)}[/tex][tex]\mathsf{N_{2(g)} + 3H_2{(g)} + 4O_{2(g)} \to 2HNO_{3(g)} +2H_2O_{(g)} \ \ \ \Delta H = (-752 \ kJ)}[/tex]

Now, from the recent equation, we have:

2 moles of nitric acid = -752 kJ

1 mole of nitric acid will be: = (1 mole × (-752 kJ)) ÷ 2 moles

1 mole of nitric acid will be: = -376 kJ

The Nernst equation at 20oC is:
Eion= 58 millvolts/z. [log10 (ion)out/(ion)in]

Calculate the equilibrium potential for Cl- if the concentration of Cl- outside of the cell is 100 and the concentration inside of the cell is 10 mmol/liter.

a. 58 millivolts
b. +58 millivolts
c. -116 millivolts
d. 0

Answers

Answer:

a. -58 millivolts

Explanation:

The given Nernst equation is:

[tex]E_{ion} = 58 millivolts /z \Big[ log_{10} \Big( \dfrac{[ion]_{out}}{[ion]_{in}}\Big) \Big]}[/tex]

The equilibrium potential given by the Nernst equation can be determined by using the formula:

[tex]E_{Cl^-} = \dfrac{2.303*R*T}{ZF} \times log \dfrac{[Cl^-]_{out}} {[Cl^-]_{in}}[/tex]

where:

gas constant(R) = 8.314 J/K/mol

Temperature (T) = (20+273)K

= 298K

Faraday constant F = 96485 C/mol

Number of electron on Cl = -1

[tex]E_{Cl^-} = \dfrac{2.303*8.314*298} {(-1)*(96845)} \times log \dfrac{100} {10}[/tex]

[tex]E_{Cl^-} = - 0.05814 \ volts[/tex]

[tex]\mathsf{E_{Cl^-} = - 0.05814 \times 1000 \ milli volts}[/tex]

[tex]\mathsf{E_{Cl^-} \simeq - 58\ milli volts}[/tex]

Tech A says that hydrocarbons are a result of complete combustion. Tech B says that a catalytic converter creates a chemical reaction, changing carbon monoxide and hydrocarbons to water and carbon dioxide. Who is correct

Answers

Answer:

Neither Tech A nor B is correct

Explanation:

Combustion is a chemical reaction that occurs when a chemical molecule(s) interacts quickly with oxygen and produces heat.

When hydrocarbon undergoes a complete combustion reaction, they produce water and CO2.

Tech B is also incorrect because the main purpose of a catalytic converter is to accelerate and speed up the chemical reaction rates, Hence, they are not involved in chemical reaction formation. Catalytic converters are utilized as a control device in exhaust emission to lessen the effect of toxic gas fumes.

The functional groups in an organic compound can frequently be deduced from its infrared absorption spectrum.

a. True
b. False

Answers

Answer:

a. True

Explanation:

The main information that gives an infrared absorption spectrum is the type of functional groups that are present in an organic compound. The infrared (IR) spectroscopy is based on the fact that functional groups absorb light in the IR region of the electromagnetic spectrum (approximately at 2,500-16,000 nm) and induces a vibrational excitation of the covalently bonded atoms in the group. The vibration of the atoms can be of different types, such as stretching, bending, etc. Each functional group (such as the carbonyl group) in an organic compound absorbs at a specific IR frequency so they can be distinguished from an IR spectrum.

The freezing point of a substance is -20°C. Its boiling point is 120°C.
a. At 80°C the substance is in the state
b. At -50°C the substance is in the state.
C. At 140°C the substance is in the state.

Answers

Answer:

a. liquid

b. solid

c. gas, (should be at it's boiling point)

Explanation: If the normal melting point of a substance is below room temperature, the substance is a liquid at room temperature. Benzene melts at 6°C and boils at 80°C; it is a liquid at room temperature. If both the normal melting point and the normal boiling point are above room temperature, the substance is a solid.

if you need an explanation to each lmk

Which of the following best describes physical science?
0...
OA.
the study of motion
OB.
the study of matter and energy
O C.
the study of Earth's structure and processes
OD.
the study of reactions
O E.
the study of living things
Reset
Ne

Answers

B. The study of matter and energy.

Because physical science is everything that doesn't include organic things.

The  study of matter and energy among the following  best describes physical science.

What is matter?

Matter in chemistry, is defined as any kind of substance that has mass and occupies space that means it possess volume .Matter is composed up of atoms which may or not be of same type.

Atoms are further made up of sub atomic particles which are the protons ,neutrons and the electrons .The matter can exist in various states  of substances such as solids, liquids and gases depending on the conditions of  the temperature and  the pressure.

The states of matter are inter convertible into each other by changing the parameters of temperature and pressure.Matter is always conserved by law of conservation of matter.The law was proposed by Antoine Lavoisier.

Learn more about matter,here:

https://brainly.com/question/9477180

#SPJ7

Lead of mass 0.75kg is heated from 21°c to its melting point and continues to be heated unit it has all melted. Calculate how much energy is supplied to the lead. [Melting point of lead 372.5°c specific latent heat of fusion of lead = 23000 Jkg 'k '] ​

Answers

Answer:

65.5J

Explanation:

ML=Q

ML=MC(change in temperature)

0.75 X 23000 =0.75 X 351 X C

C= 65.5J

The energy supplied to the lead to melt from 21°c to its melting point is 51521 Joules.

What is the specific heat capacity?

Specific heat is the amount of heat energy supplied to change the temperature of one unit mass of a substance by 1 °C. The SI unit of the specific heat capacity of a substance is J/Kg.

The mathematical expression for the specific heat capacity can be written as:

Q = mCΔT      Where C is the specific heat of the substance.

The specific heat capacity depends upon the starting temperature and is an intensive characteristic of the material.

Given, the melting point of the lead T₂ = 327.5° C

The initial temperature of the lead, T₁ = 21° C

The latent heat of the lead given, L = 230000 J/Kg K

The specific heat of the lead, C = 130 J/Kg K

The heat required to melt the lead from 12°C to 327.5 °C is :

Q = m× [C × (T₂ - T₁) + L ]

Q = 0.75 × [0.130 (327.5 - 21)  + 23000]

Q = 51521 J

Learn more about specific heat, here:

brainly.com/question/11297584

#SPJ5

Determine which choice is an example of an endothermic process.
O A. Lighting a match
B. Respiration
C. Running a gas engine
D. Baking bread

Answers

Answer:

D. Baking bread

Explanation:

In this process, energy is absorbed and in an endothermic process energy is absorbed too.

Baking bread is an example of an endothermic process, therefore option (d) is correct .

What do you mean by endothermic process ?

Endothermic reactions are chemical processes in which the reactants absorb heat from the environment to produce products.

An endothermic reaction is  accompanied by an absorption of heat.

Endothermic  reactions cause a cooling effect by lowering the temperature of the surrounding environment.

A decrease in temperature can be observed with the progression of the reaction. The reaction is non-spontaneous in endothermic reactions .

Baking bread is an example of an endothermic process, hence  option (d) is correct .

Learn more about endothermic process ,here:

https://brainly.com/question/23184814

#SPJ5

HELP ASAS 15 POINTS

When using the process of evaporation to separate a mixture, what is left behind in the evaporating dish?

A. None of these.
B. The liquid evaporates and the solid is left in the dish.
C. The mixture does not separate, and the entire mixture evaporates.
D. The mixture does not separate, and the entire mixture remains in the dish.

Answers

Answer:

liquid will be evaporated while solid remains

P.1 is a variant of SARS-CoV2. This is the so-called "Brazil variant". It has the amino acid the substitution N501Y in the spike protein on the virus surface. In cellular fluids at ~pH 7 the wild type spike protein has a net negative charge. This substitution will make the spike protein

more negative

less hydrophobic

able to absorb move UV light

less negative

Answers

There are various variants of Cov id virus. The Brazilian variant P also known as Gamma variant is the third variant of the original SARS-CoV2.

The correct answer is more negative

This variant has raised concerns since it has ability to spread more quickly then previous variants and this is more negative variant.

It is assumed that Cov id variant Gamma and Delta has ability to absorb move UV light but this is not proved yet and research is underway.

Learn more at https://brainly.com/question/24319270

How many grams of H₂SO₄ are contained in 2.00 L of 6.0 M H₂SO₄?

Please explain and show work.

Answers

Answer:

1176 grams

Explanation:

nH2SO4 =2*6=12 mol

mH2SO4=12*98=1176 grams

Answer:

solution given:

molarity of H₂SO₄=6 M

volume=2L

no of mole =6M*2=12mole

we have

mass =mole* actual mass=12*98=1176g

the mass is 1176g.

How many neutrons does Carbon- 14 and Carbon -15 have? *

Answers

Answer: 8 for both

Explanation:

If 50.0 g of sulfuric acid and 40.0 grams of barium chloride are mixed, how many grams of sulfuric acid and how many grams of barium chloride remain after the double replacement reaction is complete?

Answers

After the double replacement reaction is complete 0 grams of BaCl₂ and 31.16 grams of H₂SO₄ will remain.

First, we will write the balanced equation for the reaction

H₂SO₄ + BaCl₂  → BaSO₄ + 2HCl

This means 1 mole of BaCl₂ is needed to react completely with 1 mole of H₂SO₄ to give 1 mole of BaSO₄ and 2 moles of HCl

From the question, 50.0g of sulfuric acid is mixed with 40.0 grams of barium chloride. To determine the quantity of each substance remaining after the complete reaction, we will first determine the number of moles present in each of the reactant.

For H₂SO₄

mass = 50.0g

Molar mass = 98.079 g/mol

From the formula

Number of moles = Mass / Molar mass

∴ Number of moles of H₂SO₄ = 50.0g / 98.079 g/mol

Number of moles of H₂SO₄ = 0.5098 mol

For BaCl₂

mass = 40.0 g

Molar mass = 208.23 g/mol

∴ Number of moles of BaCl₂ = 40.0g / 208.23 g/mol

Number of moles of BaCl₂ = 0.1921 mol

Since the number of moles of H₂SO₄ is more than that of BaCl₂, then H₂SO₄ is the excess reagent and BaCl₂ is the limiting reagent (that is, it will be used up completely during the reaction)

From the equation, 1 mole of H₂SO₄ is needed to completely react with 1 mole of BaCl₂

∴ 0.1921 mol of H₂SO₄ will be needed to completely react with 0.1921 mol of BaCl₂.

Therefore, after the reaction is complete, 0 mole (i.e 0 grams) of BaCl₂ will remain and (0.5098 mole - 0.1921 mole) of H₂SO₄ will remain.

Number of moles H₂SO₄ that will remain = 0.5098 mole - 0.1921 mole = 0.3177 moles

Now, we will convert this to grams

From the formula

Mass = Number of moles × Molar mass

Mass of H₂SO₄ that will remain = 0.3177 moles × 98.079 g/mol

Mass of H₂SO₄ that will remain = 31.1597 g

Mass of H₂SO₄ that will remain31.16 g

Hence, after the double replacement reaction is complete 0 grams of BaCl₂ and 31.16 grams of H₂SO₄ will remain.

Learn more here: https://brainly.com/question/6857557

In practice, the second law of thermodynamics means that:

a. Systems move from ordered behavior to more random behavior.
b. Systems move from random behavior to more ordered behavior.
c. Systems move between ordered and random behavior patterns based on temperature.
d. Systems are constantly striving to reach equilibrium.

Answers

Answer:

Systems move from ordered behavior to more random behavior.

Explanation:

Entropy refers to the degree of disorderliness in a system. The second law of thermodynamics can be restated in terms of entropy as follows; “any spontaneous process in any isolated system always results in an increase in the entropy of that system.''(science direct)

According to this law, systems tend towards a more disorderly behaviour (increase in entropy) hence the answer given above.

I need to know what is the median of the data

Answers

Answer:

The median is also the number that is halfway into the set. To find the median, the data should be arranged in order from least to greatest. If there is an even number of items in the data set, then the median is found by taking the mean (average) of the two middlemost numbers.

I hope it helps

Other Questions
If you were a president what things would you change with society If In a = 2, In b = 3, and Inc = 5, evaluate the following:(a) In(b) In V63c4a-2(c)In(a+b-3)In(be)"3(d) [tex]4 - \frac{2}{3}x = \frac{x - 6}{5} [/tex]x=? Please tell 11. Find the 5th term of the sequence defined by the given rule. (1/2 point)f(n) = 6n + 4 Is 9/72 rational or irrational Think about the benefits that trade and interconnectedness can bring you as a consumer. Also consider the drawbacks, if any, to this increasing globalization. Should the government care about how much trade the United States undertakes with other countries? When should the government seek to promote trade? When should the government seek to limit trade? helphelphelphelphelphelp they ruined the car through poor driving If I start a road trip with 10,425 miles on my auto meter and I end it with 23,840 miles showing how many miles was my trip What is a district ? Ten tiles numbered 1 through 10 are turned face down. One tile is turned up at random, and a die is rolled and the number is square. What is the probability, written as a percent, that the product of the numbers on the tile and the die will be a perfect cube? - 18 = -3x + 6Plz help Help anyone can help me do the question,I will mark brainlest. what is the difference between logo, crest, badges and insignia For there is always light, if only were brave enough to see it. If only were brave enough to be it. How many protons does Tin have?A. 50B. 68C. 118 What is the equation of the line that passes through (-3,-1) and has a slope of 2/5? Put your answer in slope-intercept form A: y= 2/5x -1/5B: y= 2/5x +1/5C: y= -2/5x -1/5 write the balanced chemical equation for the following word equation. sodium+sulphate Acidsodium sulphate +hydrogen 22.Do you have rooms available? (A). some (B). sometime (C). sometimes (D). any What would you characterize Mrs.Dubose as