How many liters of hydrogen can be produced at a pressure of 2 atm and a temperature of 298 K?
Answers
Answer: A volume of 1.16 L hydrogen is produced at a pressure of 2 atm and a temperature of 298 K.
Explanation:
Given: Mass of Mg = 2.3 g
Pressure = 2 atm
Temperature = 298 K
The reaction equation is as follows.
[tex]Mg + 2HCl \rightarrow MgCl_{2} + H_{2}[/tex]
This shows that 1 mole of Mg gives 1 mole of [tex]H_{2}[/tex].
Hence, moles of Mg for the given mass is calculated as follows.
[tex]Moles = \frac{mass}{molar mass}\\= \frac{2.3 g}{24.30 g/mol}\\= 0.095 mol[/tex]
Hence, 0.095 moles of Mg will give 0.095 moles of [tex]H_{2}[/tex].
Formula used to calculate volume is as follows.
PV = nRT
where,
P = pressure
V = volume
n = no. of moles
R = gas constant = 0.0821 L atm/mol K
T = temperature
Substitute the values into the above formula as follows.
[tex]PV = nRT\\2 atm \times V = 0.095 mol \times 0.0821 L atm/mol K \times 298 K\\V = \frac{0.095 mol \times 0.0821 L atm/mol K \times 298 K}{2 atm}\\= 1.16 L[/tex]
Thus, we can conclude that a volume of 1.16 L hydrogen is produced at a pressure of 2 atm and a temperature of 298 K.
Related Questions
what is speed and velocity
Answers
Answer:
The distance covered by the body per unit time is called speed.
A distance travelled by the body per unit time in a fixed direction is called velocity
I hope this help u:)
Answer:
Force is an external agency that changes or tends to change the state of a body from rest to motion or from motion to rest is called force
Explanation:
The distance covered by a body in a unit time is called speed
Precipitate WILL form if Silver Nitrate reacts with Iron (III) chloride
-true or false
Answers
Answer:
yes
Explanation:
3Ag(No3) (aq) +FeCl3(aq) -->Fe(NO3)3(aq)+3AgCl(s)
1 atm is equal to
O 1 mmHg
• 14.7 mmHg
• 76 mmHg
© 760 mmHg
Answers
Answer:
C 760 mm of hg
because this is the atmospheric pressure at sea level
If the hydrogen ion concentration, (H+), in a solution is 5.39 x 10-8 M,
what is [OH-]?
A.1.86 x 1021 M
B. 1.86 x 10-7 M
Answers
Answer: 1.86*10^-7M
Explanation:
Answer:
B. 1.86 x 10^-7 M
Explanation:
What are isotopes_???
Answers
Answer:
Below!
Explanation:
Isotopes are elements with a similar chemical makeup and the same atomic number, but a different atomic mass and number of neutrons . An example of this would be carbon-12, carbon-13, and carbon-14. Three isotopes of the element carbon that have the same 6 protons but have a different neutron count. A simple way to explain isotopes would be to say that they are just different "versions" of an element.
Hope this helps ya! Best of luck <3
write the molecular formula of nitrate using criss cross method
Answers
Answer:
NO3 that is the answer to the question
what is the volume of 0.284g of carbon dioxide at STP ??
Answers
Answer:
Explanatio
NCO2= 0, 248 /44= 0 ,005636
VCO2= 0,005636* 22,4= 0 ,126254545
Plzzz help do your best to answer these questions
Answers
The empirical formula is the simplest formula of a chemical compound.
To find the empirical formula, we take the following steps;
Divide the percentage by mass of each element by its relative atomic mass.Divide the quotient of each by the lowest value obtained instep 1 aboveWrite the result of step 2 above as the subscript following each atom.1) O - 88.10/16, H - 11.190/1
O - 5.5, H - 11.19
O - 5.5/5.5, H - 11.19/5.5
O - 1, H - 2
Empirical formula = OH2
2) C - 41.368/12 H - 8.101/1, N - 32.162/14, O - 18.369/16
C - 3, H - 8, N - 2, O - 1
C - 3/1, H - 8/1 N - 2/1 O - 1/1
C - 3, H - 8, N - 2, O - 1
Empirical formula = C3H8N2O
To obtain the molecular formula where n = number of atoms of each element;
Molecular weight = 174.204 g/mol
[ 3(12) + 8(1) + 2(14) + 16]n = 174
n= 174/88
n = 2 (to the nearest whole number)
Hence, we have;
[C3H8N2O]2
The molecular formula is C6H16N4O2
3) C - 19.999/12, H - 6.713/1, N - 46.646/14, O - 26.641/16
C - 2, H - 7, N - 3, O - 2
C - 2/2, H - 7/2, N - 3/2, O - 2/2
C - 1, H - 4, N - 2, O - 1
Empirical formula - CH4N2O
https://brainly.com/question/1363167
WM "Please write the molecular formula for the following by criss cross method. 1. Calcium nitrate 2. Sodium bicarbonate 3. Magnesium nitrite 4. Sodium chloride 5. Hydrogen sulphate 6. Hydrogen chloride T-Aluminium bisulphate 8 Aluminium chloride 9. Aluminium sulphate 10. Hydrogen Nitrate
Answers
Answer:
1 Ca(NO3)2
Calcium- Ca, Valency 2
Nitrate- NO3, Valency 1
AFTER CRISS CROSS:
Ca1(NO3)2
Ca(NO3)2
2 sodium bicarbonate = NaHCO3
Na = Sodium = (Na)+
HCO3 = bicarbonate = (HCO3) -
Na HCO3
3 magnesium nitrite
+2 _ 1
Mg2(NO3)2
4 Na Cl
+1 _1
formula NaCl
5 hydrogen sulphide
H SO4
+1 _2
formula H2SO4
6 H Cl
+1 _1
HCl
7 AL2 HSO4
+2 -2
AL2(HSO4)3
8 NH4 Cl
+1 _1
NH4Cl
9 NH4 SO4
+1 _2
(NH3)2SO4
10 H NO3
+1 _1
HNO3
Which of the following is the correct Lewis structure for methane (CHA)?
O A. H-C-H
H
I-0-I
OB. H-H-C-H-H
0
H
O c. H:C:H
H
OD H-C-H
Answers
The correct lewis structure of methane(CH4)
C. H:C:H:H
state boyl"s law and Charle's law
Answers
Answer:
hey mateee
Boyle's law :- the pressure (p) of a given quantity of gas varies inversely with its volume (v) at constant temperature.
Boyle's law can also be formularized as P1V1 = P2V2
Charle's law :- the volume occupied by a fixed amount of gas is directly proportional to its absolute temperature, if the pressure remains constant.
Charle's law can also be formularized as V1/T1 = V2/T2
Water is super soluble and this solubility is incredibly helpful for life. Tell me how this solubility helps maintain different processes when it comes to life.
Answers
Answer: Water is SUPER soluble and regarded as an universal solvent because it is polar in nature and dissolves most inorganic solutes and some polar organic solutes to form aqueous solutions.
Explanation:
WATER is a substance which is composed of the elements such as hydrogen and oxygen that are combined in the ratio of 2:1. The physical properties of water include:
--> it is a colourless, odourless and tasteless liquid and
--> the boiling point of water is 100°C(this is due to the presence of hydrogen bonding).
The solubility of a solute in a solvent at a particular temperature is the maximum amount of solute in moles or grams that will saturate 1000 dm³ or grams of the solvent.
Water is regarded as a universal solvent BECAUSE it is capable of dissolving many substances. This solubility helps maintain different processes in life such as acting as the solvent which helps cells transport and use substances like oxygen or nutrients.
PLEASE HELP ME I DONT EVEN KNOW IF I CIRCLES THE RIGHT THING!!
Answers
Answer:
why are anime and cartoons awesome? wt..f
Explanation:
I dont got that are you serious or making fun?
4.1 shows a plant cell. g For Examiner's Use n. C D Fig. 4.1 (i) Name the type of plant cell shown in Fig. 4.1. [1]
Answers
Answer:
palisade cell due to presence of chloroplasts
in a galvanic cell, if a concentration of an electrolyte is added does it affect the electron potential of that electrolyte?
Answers
Answer:
Changing the concentration of one solution in the cell will increase the voltage potential of the cell because you are putting the system further out of equilibrium. Because the concentration in only one side of the cell has changed, the concentration gradient across both sides of the cell becomes steeper. In order for this experiment to work, the salt bridge must be concentrated enough to effectively separate the two electrolyte solutions, but it must also be porous enough to allow ionic flow.
Explanation:
think so you like it
How do I unscramble
kgiueneoseph
Answers
Answer:
d
Explanation:
Housekeeping is the answer :)
I hope this answer helps you out. Brainliest would be appreciated. Have a good day/night :).What happens when The vapour obtained by dropping conc. H2SO4 in a mixture of KI and MnO2 is treated with hypo solution
Answers
The reaction between H2SO4 in a mixture of KI and MnO2 yields iodine which reacts with hypo solution by titration and the iodine is decolorized.
Iodine is decolorized.
The first reaction stated in the question occurs as follows;
2 KI (aq) + 2 H2SO4 (aq) + MnO2 (s) → MnSO4 (aq) + K2SO4 (aq) + I2 (s) + 2 H2O (l)
The reaction here is the formation of iodine from MnO2 and KI in the presence of dropwise H2SO4.
Hypo is the common name of sodium thio-sulphate or sodium hypo-sulfite.
The equation of the titration reaction is;
2Na2S2O3 + I2→ Na2S4O6 + 2NaI
When this reaction takes place, iodine is decolorized due to its reduction to I^-.
For more information see https://brainly.com/question/16857360
The electron configuration for Helium (He) is shown below.
1s2
Which diagram shows the correct distribution of electrons in the electron shells of a helium atom?
Answers
how many moles of sodium are produced in 46g of substance?
Answers
Answer:
Only 2moles are produced from it
During a lab experiment performed at STP conditions, you prepare HCl by reacting 100. ml of Cl2 gas with an excess of H2 gas.
How many ml of a solution of Ba(OH)2 0.230M do you need to neutralize all the HCl produced?
Answers
Answer: 19.4 mL Ba(OH)2
Explanation:
H2(g) + Cl2(g) --> 2HCl(aq) (make sure this equation is balanced first)
At STP, 1 mol gas = 22.4 L gas. Use this conversion factor to convert the 100. mL of Cl2 to moles.
0.100 L Cl2 • (1 mol / 22.4 L) = 0.00446 mol Cl2
Use the mole ratio of 2 mol HCl for every 1 mol Cl2 to find moles of HCl produced.
0.00446 mol Cl2 • (2 mol HCl / 1 mol Cl2) = 0.00892 mol HCl
HCl is a strong acid and Ba(OH)2 is a strong base so both will completely ionize to release H+ and OH- respectively. You need 0.00892 mol OH- to neutralize all of the HCl. Note that one mole of Ba(OH)2 contains 2 moles of OH-.
0.00892 mol OH- • (1 mol Ba(OH)2 / 2 mol OH-) • (1 L Ba(OH)2 / 0.230 M Ba(OH)2) = 0.0194 L = 19.4 mL Ba(OH)2
Unknown # 41
Flame Test Color: Lilac
Addition of HCl(aq): NR (No reaction)
Addition of HCl(aq) and BaCl2(aq): NR (No reaction)
Addition of HNO3(aq) and AgNO3(aq): Yellow precipitate
What is the unknown ionic compound molecular formula?
Answers
Explanation:
Flame test colors:
Li+ = Crimson Red
Na+ = Bright Orange-Yellow
K+ = Lilac
Addition of nitric acid and silver nitrate (HNO3 and AgNO3),
Cl- = White precipitate
Br- = Creamy precipitate
I- = Yellow Precipitate
Hope this helps, brainliest would be appreciated :)
Susan said, "if I fertilize my geranium plants, they will blossom"
Choose the correct step in the scientific method
A. recognize a problem
B. from hypothesis
C. test the hypothesis with an experiment
D. draw conclusions
Answers
Answer:
This is called a hypothesis, which can be identified by the if... then... format.
So, the correct option is B. Form a hypothesis.
Let me know if this helps!
Answer:
C
Explanation:
Using your answers from part C, complete the chemical formula of each compound. If the number of ions is 1, leave that
number out of the formula.
Drag each number to the correct location. Numbers may be used more than once
Answers
Answer:
1;1, 2;1, 3;1, 1;2, 1;1, 3;2, 1;3, 2;3, 1;1.
I hope this will help.
Answer:
This is what the answer looks like
Explanation:
Heat transfer takes place when:
A. there is a temperature difference.
B. conduction or convection occurs, but not radiation.
OC. thermal energy is present.
D. None of these
Answers
Answer:
A. There is a temperature difference
Explation:
Whenever there is a temperature difference, heat transfer occurs. Heat transfer may occur rapidly, such as through a cooking pan, or slowly, such as through the walls of a picnic ice chest.
Answer:
A.) there is a temperature difference
Explanation:
I got it correct on founders edtell
please help me it's urgent
Answers
Answer:
a) NaSO4+Bacl2 -> Baso4+2Nacl
b) 4C3H3+15O2 -> 12CO2+6H2O
Explanation:
The atoms at the reactants is equal with the product.
Enolase, an enzyme that catalyzes the conversion of 2-phosphoglycerate to phosphoenolpyruvate: Group of answer choices demonstrates a base-catalysis step, where a proton is removed from the substrate. demonstrates an acid-catalysis step, where a proton is added to the substrate. requires two Mg2 cofactors and as such demonstrates metal-ion catalysis. stabilizes the intermediate and transition
Answers
Answer:
Requires two Mg²⁺ cofactors and as such demonstrates metal-ion catalysis
Explanation:
Electrostatic catalysis or metal ion catalysis is a catalytic mechanism that makes use of metalloenzymes, such as enolase along with a metal ion which is bound tightly, including, Mo⁶⁺, Ni³⁺, Co³⁺, Mn²⁺, Zn²⁺, Cu²⁺, and Fe²⁺, to undertake a catalysis
For maximal activity, enolase requires the presence of 2 equivalent metal ions in each site which is active
Therefore, the correct option is; requires two Mg²⁺ cofactors and as such demonstrates metal-ion catalysis
are standard electrode potential and standard hydrogen potential same?
Answers
Answer:
Potentials of any other electrodes are compared with that of the standard hydrogen electrode at the same temperature. Hydrogen electrode is based on the redox half cell: 2 H+(aq) + 2 e− → H2(g)..
Some animals that live in extremely cold environments protect themselves from freezing by increasing the molality of certain chemicals in their cells. Define molality and explain how it protects these animals.
Answers
[tex]\\ \sf \longmapsto m=\dfrac{Moles\:of\:solute}{Wt\:of\:solvent(in\:g)}\times 1000[/tex]
A drink that contains 4 1/2 ounces of a proof liquor… approximately how many drinks does this beverage contain?
Answers
Complete Question
A guest orders a drink that contains 4 1/2 ounces of 80-proof liquor. Approximately how many drinks does this beverage contain?
Answer:
[tex]No\ of\ drinks =3[/tex]
Explanation:
From the question we are told that:
Ordered drink 4 1/2 ounces of 80-proof liquor
Generally
80-proof liquor contains 40\% alcohol
Giving the drink a standard 1.5 ounce of distilled spirit
Therefore
[tex]No\ of\ drinks =\frac{4.5}{1.5}[/tex]
[tex]No\ of\ drinks =3[/tex]
Question 5: thanks you
Answers
Answer:
A linear molecule has a bond angle of 180°
