How many equivalent resonance structures can be drawn for the molecule of SO3 without having to violate the octet rule on the sulfur atom

Answer:

-2, -2 and 0.

- Respiration is a process in which energy is produced and photosynthesis is a process in which energy is used.

Explanation:

Hello,

In this case, oxygen is a substance that is used for animals and us to acquire the energy necessary for several functions by the cellular respiration (we also need glucose), besides, it is a product of the photosynthesis carried out by vegetable cells (plants). Moreover, carbon dioxide and water are used by the plants to produce oxygen we need as well as glucose via the aforementioned photosynthesis, thus, both chemical reactions are shown below:

[tex]C_6H_{12}O_6+6O_2\rightarrow 6CO_2+6H_2O\ \ \ respiration\\\\6CO_2+6H_2O\rightarrow C_6H_{12}O_6+6O_2\ \ \ photosynthesis[/tex]

In such a way, since the oxygen in carbon dioxide and water has an oxidation state of -2 (reduced form) we can say that the respiration is a process in which energy is produced and since the oxygen yielded during the photosynthesis has an oxydation state of 0, we can say that photosynthesis is a process in which energy is used.

Best regards.

Answer:

The answer is "[tex]\bold{\log \frac{[0] mole}{[R]mole}}[/tex]"

Explanation:

[tex]E_{cell} =E_{cell}^{\circ} - \frac{0.0591}{n}= \log\frac{[0]}{[R]}\\[/tex]

In the above-given equation, we can see from [tex]E_{ceu}[/tex], of both oxidant [tex]conc^n[/tex]as well as the reactant were connected. however, weight decreases oxidant and reduction component concentration only with volume and the both of the half cells by the very same factor  and each other suspend

[tex]\to \log \frac{\frac{\text{oxidating moles}}{25 \ ml}}{\frac{\text{moles of reduction}}{25 ml}} \ \ = \ \ \log \frac{\frac{\text{oxidating moles}}{30 \ ml}}{\frac{\text{moles of reduction}}{30 ml}} \\\\\\[/tex]

[tex]\to {\log \frac{[0] mole}{[R]mole}}[/tex]

The cell potential of the electrochemical reaction has been the same when the volume has been reduced from 30 mL to 25 mL in each half cells.

The cell potential has been given as the difference in the potential of the two half cells in the electrochemical reaction.

The two cells has been set with the concentration of solutions in the oxidation and reduction half cells.

The cell potential has been changed when there has been a change in the potential of the half cells.

The volume of 30 mL to the solution has been, resulting in the cell potential difference of x.

With the volume of 25 mL, there has been the difference in the potential being similar to the 30 mL solution, i.e. x.

Thus, the cell potential of the electrochemical reaction has been the same when the volume has been reduced from 30 mL to 25 mL in each half cells.

Learn more about cell potential, here:

https://brainly.com/question/1313684

Answer:

I would say c) a closed circuit.

Hope I was right.

Answer:

Chemistry is one of the causes for global warming, and in some cases it can even cause certain illnesses.

Answer:

Chemists have both hurt the environment and helped the environment by their actions.

Explanation:

<3

Answer:

The edge length of a face-centered cubic unit cell is 435.6 pm.

Explanation:

In a face-centered cubic unit cell, each of the eight corners is occupied by one atom and each of the six faces is occupied by a single atom.

Hence, the number of atoms in an FCC unit cell is:

[tex] 8*\frac{1}{8} + 6*\frac{1}{2} = 4 atoms [/tex]

In a face-centered cubic unit cell, to find the edge length we need to use Pythagorean Theorem:

[tex] a^{2} + a^{2} = (4R)^{2} [/tex]     (1)

Where:

a: is the edge length

R: is the radius of each atom = 154 pm      

By solving equation (1) for "a" we have:

[tex] a = 2R\sqrt{2} = 2*154 pm*\sqrt{2} = 435.6 pm [/tex]    

Therefore, the edge length of a face-centered cubic unit cell is 435.6 pm.   

I hope it helps you!

Answer:

Explanation:

In all calorimetric experiment , the calorimeter must be isolated from the surrounding . Otherwise the heat change in the experiment can not be determined with precision .

The reaction is endothermic . Hence, there is lowering of temperature due to absorption of heat in the reaction equal to ΔH°. The value of ΔH° can be calculated by measuring fall in the temperature of the content . The fall in the temperature will be less when heat is allowed to come from the surrounding . Less fall of temperature will result in less ΔH° to be calculated .

Hence in the given experiment , if the student neglects to put lid on the cup , the experiment will give less value of ΔH°.

Answer:

0.423 m.

Explanation:

The following data were obtained from the question:

Mass of glycine (NH2CH2COOH) = 141.5 g

Mass of water = 4.456 kg

Molality =.?

Next, we shall determine the number of mole in 141.5 g of glycine (NH2CH2COOH.

This is illustrated below:

Mass of glycine (NH2CH2COOH) = 141.5 g

Molar mass of glycine (NH2CH2COOH) = 14 + (2x1) + 12 + (2x1) + 12 + 16 + 16 + 1 = 75 g/mol

Mole of glycine (NH2CH2COOH) =.?

Mole = mass /Molar mass

Mole of glycine (NH2CH2COOH) = 141.5/75

Mole of glycine (NH2CH2COOH) = 1.887 moles

Finally, we shall determine the molality of the solution as follow:

Molality is simply defined as the mole of solute per kilogram of water. Mathematically it is expressed as:

Molality = mole / mass (kg) of water

With the above formula, we can obtain the molality of the solution as follow:

Mole of glycine (NH2CH2COOH) = 1.887 moles

Mass of water = 4.456 kg

Molality =.?

Molality = mole /mass (kg) of water

Molality =1.887/4.456

Molality = 0.423 m

Therefore, the molality of the solution is 0.423 m

Answer:

105/22*(1.251-0.620)

105/22*0.631

4.772*0.631

3.011132

Hope it helps

Answer:

3.0

Explanation:

First, complete the operations inside the parenthesis according to the normal rules for significant figures. Because there are subsequent calculations, keep at least one extra significant figure when possible: (4.7727) × (0.631).

The final product will be rounded to two significant figures because it can’t be more precise than the least precise number in the problem, 22. The final product is 3.0.

Answer:

condensation

Explanation:

What led to the formation of oceans after the water on the Earth's surface evaporated is a condensation reaction of water vapour.

The water present on the surface of the earth was able to evaporate as a result of the hot condition of the primitive earth. As the earth cools down the water vapour present in the atmosphere began to condense, gradually forming puddles of water and eventually leading to the formation of various oceans as we currently have it on the earth.

Answer:

as earth cooled, water in the atmosphere condensed.

Explanation:

Answer:

[tex][N_2]_{eq}=[H_2]_{eq}=0.09899M[/tex]

[tex][NO]_{eq}=0.00202M[/tex]

Explanation:

Hello,

In this case, for the given chemical reaction:

[tex]2NO\rightleftharpoons N_2+O_2[/tex]

We know the equilibrium constant and equilibrium expression:

[tex]Kc=2.4x10^3=\frac{[N_2][O_2]}{[NO]^2}[/tex]

That in terms of the reaction extent [tex]x[/tex] (ICE procedure) we can write:

[tex]2.4x10^3=\frac{x*x}{(0.2M-2*x)^2}[/tex]

In such a way, solving for [tex]x[/tex] by using a quadratic equation or solver, we obtain:

[tex]x_1=0.09899M\\x_2=0.1010M[/tex]

Clearly the solution is 0.09899M since the other value will result in a negative equilibrium concentration of NO. In such a way, the equilibrium concentrations of all the species are:

[tex][N_2]_{eq}=[H_2]_{eq}=x=0.09899M[/tex]

[tex][NO]_{eq}=0.2M-2*0.09899M=0.00202M[/tex]

Regards.

Answer:

AgI I the limiting reactant.

Explanation:

The balanced equation for the reaction is given below:

2AgI + HgI2 → Ag2HgI4

Next, we shall determine masses AgI and HgI2 that reacted from the balanced equation.

This is illustrated below:

Molar mass of Agl = 108 + 127 = 235 g/mol

Mass of AgI from the balanced equation = 2 x 235 = 470 g

Molar mass of HgI2 = 201 + (2x127) = 455 g/mol

Mass of HgI2 from the balanced equation = 1 x 455 = 455 g

From the balanced equation above,

470 g of AgI reacted with 455 g of HgI2.

Finally, we shall determine the limiting reactant as follow:

From the balanced equation above,

470 g of AgI reacted with 455 g of HgI2.

Therefore, 2 g of AgI will react with

= (2 x 455)/470 = 1.94 g of HgI2.

From the calculations made above, we can see that only 1.94 g out of 3.50 g of HgI2 given is needed to react completely with 2 g of AgI.

Therefore, AgI I the limiting reactant.

Answer:

466 torr

Explanation:

Step 1: Given data

Step 2: Calculate the final pressure

Since we have a gas changing at a constant temperature, we can calculate the final pressure using Boyle's law.

P₁ × V₁ = P₂ × V₂

P₂ = P₁ × V₁ / V₂

P₂ = 626 torr × 5.00 L / 6.72 L

P₂ = 466 torr

Answer:

Kindly check the explanation section.

Explanation:

PS: kindly check the attachment below for the required diagram that is the diagram showing solid sodium chloride looks like at the atomic level.

The chemical compound known as sodium chloride, NaCl has Molar mass: 58.44 g/mol, Melting point: 801 °C and

Boiling point: 1,465 °C. The structure of the solid sodium chloride is FACE CENTRED CUBIC STRUCTURE. Also, solid sodium chloride has a coordination number of 6: 6.

In the diagram below, the positive sign shows the sodium ion while the thick full stop sign represent the chlorine ion.

The NaCl has been the ionic structure with an equal number of sodium and chlorine ions bonded.

In the structure, there has been each Na ion bonded with the Cl ions. There has been the transfer of electrons between the structure in order to attain a stable configuration.

The expected structure of the NaCl would be the image attached below.

The image has been the cubic structure of NaCl. With the presence of Na ions at the vertex of the structure, there has been the presence of the Cl ion with every Na ion for the electron transfer.

For more information about the structure of NaCl, refer to the link:

https://brainly.com/question/2729718

Answer:

2,2,3,3-tetrapropyloxirane

Explanation:

In this case, we have to know first the alkene that will react with the peroxyacid. So:

What do we know about the unknown alkene?

We know the product of the ozonolysis reaction (see figure 1). This reaction is an oxidative rupture reaction. Therefore, the double bond will be broken and we have to replace the carbons on each side of the double bond by oxygens. If [tex](CH_3CH_2CH_2)_2C=O[/tex] is the only product we will have a symmetric molecule in this case 4,5-dipropyloct-4-ene.

What is the product with the peroxyacid?

This compound in the presence of alkenes will produce peroxides. Therefore we have to put a peroxide group in the carbons where the double bond was placed. So, we will have as product 2,2,3,3-tetrapropyloxirane. (see figure 2)

Answer:

[tex]\rho _{oil}<\rho _{plastic}<\rho _{water}[/tex]

Explanation:

Hello,

In this case, since water and oil are immiscible due to the oil's nonpolarity and water's polarity, when mixed, the oil remains on the water since it is less dense than water. In such a way, for a plastic sunk in the oil and floating on the water (in middle of them) we can conclude that the plastic have a mid density, therefore, the required organization is:

[tex]\rho _{oil}<\rho _{plastic}<\rho _{water}[/tex]

Best regards.

Answer:

All chemical reactions involve energy. Energy is used to break bonds in reactants, and energy is released when new bonds form in products. Endothermic reactions absorb energy, and exothermic reactions release energy. The law of conservation of energy states that matter cannot be created or destroyed.

Answer:

Explanation:

Given that:

The argon atoms are excited into an excited state before emitting the 488.0 nm laser.

the energy of the first ionization energy of argon is 1520 kJ mol-1.

SInce 1 eV = 96.49 kJ/mol

Therefore, the energy of the first ionization energy of argon in eV is = ( 1520/ 96.49) eV

=  15.75 eV

To find where  the energy level of the excited state lies below the vacuum energy level, let's first determine, the energy liberated by using planck expression.

[tex]E = \dfrac{hc}{\lambda}[/tex]

[tex]E = \dfrac{6.6 \times 10^{-34} \times 3 \times 10^8}{488 \times 10^{-9}}[/tex]

[tex]E = \dfrac{1.98 \times 10^{-25}}{488 \times 10^{-9}}[/tex]

[tex]E = \dfrac{1.98 \times 10^{-25}}{488 \times 10^{-9}}[/tex]

[tex]E =4.057 \times 10^{-19} \ J[/tex]

Converting Joules (J) to eV ; we get,

[tex]E =\dfrac{4.057 \times 10^{-19}}{1.6 \times 10^{-19}}[/tex]

E = 2.53 eV

The energy levels of the first exited state = -13.223 eV

The question is incomplete,the complete question is as follows:

A piece of solid Fe metal is put into an aqueous solution of Cu(NO3)2. Write the net ionic equation for any single-replacement redox reaction that may be predicted. Assume that the oxidation state of in the resulted solution is 2 . (Use the lowest possible coefficients for the reaction. Use the pull-down boxes to specify states such as (aq) or (s). If a box is not needed, leave it blank. If no reaction occurs, leave all boxes blank and click on Submit.)

Answer:

Fe(s) + Cu^2+(aq) => Fe^2+(aq) + Cu(s)

Explanation:

An ionic equation is a chemical equation which shows clear image of reactions of the electrolytes in aqueous solution.

Molecular reaction equation for the reaction between iron and copper II nitrate is as follows:

Fe(s) + Cu(NO3)2(aq) => Fe(NO3)2(aq) +Cu(s)

The net ionic equation for any single-replacement redox reaction is as follows:

Fe(s) + Cu^2+(aq) => Fe^2+(aq) + Cu(s)

Answer:

C. 0.191 M

Explanation:

Our goal for this question, is to calculate the concentration of the HCl solution. For this, in the experiment, a solution of NaOH was used to find the moles of HCl. Therefore, our first step is to know the reaction between HCl and NaOH:

[tex]HCl~+~NaOH~->~NaCl~+~H_2O[/tex]

The "titrant" in this case is the NaOH solution. If we know the concentration of NaOH (0.100M) and the volume of NaOH (38.2 mL=0.0382 L), we can calculate the moles using the molarity equation:

[tex]M=\frac{mol}{L}[/tex]

[tex]0.100~M=\frac{mol}{0.0382~L}[/tex]

[tex]mol=0.100~M*0.0382~L=0.0382~mol~of~NaOH[/tex]

Now, in the reaction, we have a 1:1 molar ratio between HCl and NaOH (1 mol of HCl is consumed for each mole of NaOH added). Therefore we will have the same amount of moles of HCl in the solution:

[tex]0.0382~mol~of~NaOH\frac{1~mol~HCl}{1~mol~NaOH}=0.0382~mol~HCl[/tex]

If we want to calculate the molarity of the HCl solution we have to divide by the litters of HCl used in the experiment (20 mL= 0.02 L):

[tex]\frac{0.0382~mol~HCl}{0.02~L}~=~0.191~M[/tex]

The concentration of the HCl solution is 0.191 M

I hope it helps!

Answer:

(a) [tex]M=0.257M[/tex]

(b) [tex]M=0.0510M[/tex]

(c) [tex]M =0.500M[/tex]

(d) [tex]M= 0.391M[/tex]

Explanation:

Hello,

In this case, since the molarity or molar concentration of a solution is computed by dividing the moles of solute by the volume of solution in liters, we proceed as follows:

(a) The molar mass of sodium chloride is 58.45 g/mol and the volume in liters is 0.100 L, therefore, the molarity is:

[tex]M=\frac{1.50gNaCl}{0.100L} *\frac{1molNaCl}{58.45gNaCl} =0.257M[/tex]

(b) The molar of potassium dichromate is 294.2 g/mol and the volume in liters is 0.100 L, therefore, the molarity is:

[tex]M=\frac{1.50gK_2Cr_2O_7}{0.100L} *\frac{1molK_2Cr_2O_7}{294.2gK_2Cr_2O_7} =0.0510M[/tex]

(c) The molar of calcium chloride is 111 g/mol and the volume in liters is 0.125 L, therefore, the molarity is:

[tex]M=\frac{5.55gCaCl_2}{0.100L} *\frac{1molCaCl_2}{111gCaCl_2} =0.500M[/tex]

(d) The molar of sodium sulfate is 142 g/mol and the volume in liters is 0.125 L, therefore, the molarity is:

[tex]M=\frac{5.55gNa_2SO_4}{0.100L} *\frac{1molNa_2SO_4}{142gNa_2SO_4} = 0.391M[/tex]

Best regards.

Answer:

A) CH3CH2CH2CH2CH2CH2OH

Explanation:

For this question, we have the following answer options:

A) CH3CH2CH2CH2CH2CH2OH

B) (CH3CH2)2CH(OH)CH2CH3

C) (CH3CH2)2CHOHCH3

D) (CH3CH2)3COH

E) (CH3CH2)2C(CH3)OH

We have to remember the reaction mechanism of the substitution reaction with [tex]PBr_3[/tex]. The idea is to generate a better leaving group in order to add a "Br" atom.

The [tex]PBr_3[/tex] attacks the "OH" generation new a bond to P (O-P bonds are very strong), due to this new bond we will have a better leaving group that can remove the oxygen an allow the attack of the Br atom to generating a new C-Br bond. This is made by an Sn2 reaction. Therefore we will have a faster reaction with primary substrates. In this case, the only primary substrate is molecule A. So, "CH3CH2CH2CH2CH2CH2OH" will react faster.

See figure 1

I hope it helps!

The given question is incomplete, the complete question is:

An atom of 122In has a mass of 121.910280 amu. Calculate the binding energy in MeV per atom. Use the masses: mass of 1H atom = 1.007825 amu mass of a neutron = 1.008665 amu 1 amu = 931.5 MeV

Answer:

The correct answer is 1029.95 MeV.

Explanation:

Based on the given information,  

The mass of proton is 1.007825, the mass of neutron is 1.008665.  

The atomic number of Indium is 49, therefore, the number of neutrons will be, 122-49 = 73.  

Now the calculated mass will be,  

= 49 * 1.007825 + 73 * 1.008665

= 49.383425 + 73.632545

= 123.01597

The mass defect is calculated by subtracting the actual mas from calculated mass,  

Mass defect = Actual mass - Calculated mass

= 121.910280 - 123.01597

= -1.10569 amu

Now the binding energy will be,  

Binding energy = 1.10569 * 931.5 MeV

= 1029.95 MeV

Answer:

That means that if you are calculating entropy change, you must multiply the enthalpy change value by 1000. So if, say, you have an enthalpy change of -92.2 kJ mol-1, the value you must put into the equation is -92200 J mol-1

The entropy change in the surroundings associated with this reaction occurring at 25 degree C is calculated as ΔS = -ΔH/T J/K.

Entropy is a quantity which gives idea about the randomness or arrangement of atoms or molecules present in any sample.

Entropy change will be calculated as:
ΔS = -ΔH/T, where

ΔH = chnage in enthalpy (J/mole)

T = temperature (K)

So to calculate the entropy change first we have to know about the value of enthalpy in joules and then divide it by the temperature.

Hence the unit of entropy is joule per kelvin.

To know more about entropy, visit the below link:
https://brainly.com/question/6364271

Answer:

4.46 mol of NH3

Explanation:

The equation of he reaction is given as;

2N + 3H2 --> 2NH3

From the stochiometry of the reaction, 1 mol of Nitrogen produces 2 mol of Ammonia.

Mass of Nitrogen = 31.2g

Molar mass of Nitrogen = 14g/mol

Number of moles = Mass / Molar mass = 31.2 / 14 = 2.23 mol

Since 1 mol of N = 2 mol of NH3;

2.23 mol of N2 would produce x

x = 2.23 * 2 = 4.46 mol of NH3

Answer:

PLEASE LOOK INN TO THE FILE YOU WILL GET ANSWER AND ALSO SUMMARY THANKS FOR ASKING QUESTION.

Explanation:

Answer:

A (Atomic mass number or Nucleon number)

Explanation:

The mass number is the total number of protons and nucleons in an atomic nucleus.

Hope this helps.

Please mark Brainliest...

Answer:

A. mm,cm,m,Km

B. mg, g, Kg

C. mL,L

D. ms, s, min, h

Explanation:

Answer:

HBr, CH3C(OH)2 and CH3COOH, Br-

Explanation:

The conjugate acid-base pairs acid reacts with base to form a conjugate acid and conjugate base.

Conjugate acid is formed when a bases receives a proton  (H+) and a conjugate base is formed when an acid losses a proton (H+).

From the given equation:

HBr, CH3C(OH)2 and CH3COOH, Br- are conjugate acid-base pair, where HBr is an acid and CH3C(OH)2 is a conjugate acid while CH3COOH and Br- is the conjugate base.