How is the interaction of electrons with the nucleus of an atom similar to the interaction of two magnets?

Answers

Answer 1

Answer:

One of the harder ideas to grasp in fusion is that nuclei, which, because of their electric charge, strongly repel at long range

(compared to the size of a nucleus), can strongly attract at short range. This activity allows students to explore a similar situation in

which

the magnetic interaction provides the repulsion (similar to the electric interaction within

the nucleus) and Velcro provides an attractive force at short range (similar to the nuclear

strong interaction).

Explanation:

Brainliest Answer pls


Related Questions

which terrestrial planets have diameters that are nearly equal in size?

Answers

Answer:

Venus and Earth have the diameter nearly equal in size

What are the 4 classes of Platyhelmintheses and how are they different.

Answers

Answer: Platyhelminthes are divided into four classes: Turbellaria, free-living marine species; Monogenea, ectoparasites of fish; Trematoda, internal parasites of humans and other species; and Cestoda (tapeworms), which are internal parasites of many vertebrates.Mar 5, 2021

Explanation:

why is the cooling system in a nuclear power station important? what will happen if the system malfunction?

Answers

Cooling is needed to condense the after-turbine steam in the internal circuit and recycle it. As the steam condenses back to water, the surplus heat must be discharged to the air or a body of water.

Cooling Power Plants

The amount of cooling required by any steam-cycle power plant (of a given size) is determined by its thermal efficiency. It has essentially nothing to do with whether it is fuelled by coal, gas or uranium.
However, currently operating nuclear plants often do have slightly lower thermal efficiency than coal counterparts of similar age, and coal plants discharge some waste heat with combustion gases, whereas nuclear plants rely on water.
Nuclear power plants have greater flexibility in location than coal-fired plants due to fuel logistics, giving them more potential for their siting to be determined by cooling considerations.
The most common types of nuclear power plants use water for cooling in two ways:
To convey heat from the reactor core to the steam turbines.
To remove and dump surplus heat from this steam circuit. (In any steam/ Rankine cycle plant such as present-day coal and nuclear plants there is a loss of about two-thirds of the energy due to the intrinsic limitations of turning heat into mechanical energy.)

You place a small sphere with a net charge of 5 space x space 10 to the power of negative 6 end exponent space C at one corner of a square that measures 5 m on each side. What is the magnitude of the electric field at the opposite corner of the square?

900 N/C


9,000 N/C


450 N/C


4,500 N/C​

Answers

450n/c

(Sorry if this didn’t help)

in general, what happens to the density and temperature of a gas as it expands?

Answers

The temperature of a gas will increase and the density will decrease as it

expands.

The expansion of gas  happens as a result of an increase in the elastic

collision of the atoms. This is as a result of the increase in temperature which causes the atoms to be more spatially arranged.

The density of gas also reduces as a result of the same number of gas

molecules occupying more volume.

Read more on https://brainly.com/question/1433426

Determine the force required to move a block if the coefficient of static friction of one block and the floor is 0.35 and the coefficient of the static friction between 2 boxes is 0.25

Answers

Answer:

32.5

Explanation:

Choose the normal force acting between the object and the ground. Let's assume a normal force of 250 N .

Determine the friction coefficient. ...

Multiply these values by each other: (250 N) * 0.13 = 32.5 N .

You just found the force of friction!

Q3.
Name the type of relationship shown in the graph below?
<<<<

A.Linear
B.Non-linear
C.Quadratic
D.Non-quadratic


Answers

Answer:

Linear

Explanation:

The slope is constant.

Answer:

A. Linear

Explanation:

hope I help you

How are particles in liquids, solids, and gases the same? How are they different?

Answers

Answer:

Gases, liquids and solids are all made up of atoms, molecules, and/or ions, but the behaviors of these particles differ in the three phases. ... gas are well separated with no regular arrangement. liquid are close together with no regular arrangement. solid are tightly packed, usually in a regular pattern.

Explanation:

#CARRYONLEARNING

Which statement describes how the atoms in a conducting wire are organized?(1 point)

Negatively charged valence electrons are packed in a repeating pattern, and positively charged nuclei flow freely.
Negatively charged valence electrons are packed in , , a repeating, , pattern, and positively charged nuclei flow freely, .

The positively and negatively charged particles in the atoms are randomly organized and move freely.
The positively and negatively charged particles in the atoms are randomly organized and move freely, .

Both the positively and negatively charged particles in the atoms move freely.
Both the positively and negatively charged particles in the atoms move freely, .

Positively charged nuclei are packed in an organized pattern, and the negatively charged valence electrons flow freely.

Answers

Answer:

Positively charged nuclei are packed in an organized pattern, and the negatively charged valence electrons flow freely.

Explanation:

The atoms in a conducting wire are organized by the Positively charged

nuclei being packed in an organized pattern, and the negatively charged

valence electrons flow freely.

A conducting wire involves the flow of electric current between the

atoms.The electric current excites the electrons thereby resulting in their flow .

The valence electrons are affected because they haven't achieved an

octet configuration and aren't stable which gives rise to their free flow

within the wire.

Read more on https://brainly.com/question/25447886

an unbalanced force of 965 N causes an object to accelerate at 54.5 m/s^2. what is the mass of the object

Answers

Answer:

[tex]F=ma \\ 965 = m(54.5) \\ m = \frac{965}{54.5} \\ m = 17.7kg[/tex]

1. The two images below show the area swept out by the same planet during two separate time spans. If the first picture represents the area swept out during a time
of 'A' days and the second represents the area swept out during a time of "B* days, which of the following statements is true about A and B? Pls help

Answers

Answer:

its A

Explanation:

took the test

In essence, this means that planets do not travel along their orbits at a constant speed. Instead, they move at different speeds so that the line connecting the centres of the Sun and the planet covers the same amount of ground in equal amounts of time. Thus, option A is correct.

What planet during two separate time spans?

The law of areas is Kepler's second law of planetary motion. A line drawn between a planet and the Sun is said to cover equal areas in an equivalent amount of time according to this law.  

The velocity of a planet as it travels along its elliptical course is described by Kepler's Second Law. An elliptical object will cover equal amounts of space in a same amount of time if a line is drawn from the sun to the planet. This implies that the planet moves more slowly away from the sun and faster toward it.

Therefore, at equal times, the planet must cover a wider arc when it is nearer the Sun than when it is farther away.

Learn more about spans here:

https://brainly.com/question/28970090

3SPJ2

Which example shows an endothermic reaction?


reactants + thermal energy --> products

products + thermal energy --> reactants

products --> reactants + thermal energy

reactants --> products + thermal energy

please help

Answers

Answer:

reactants --> products + thermal energy

Explanation:

Heat is absorbed in endothermic reaction.

6. A squirrel performs 20 J of work climbing a tree in 5 seconds. What
was the squirrel's power?

Answers

18j-19 plus the 2nd equation is 18. Or you could rewrite it as 18-19=j. Hope this helped! :)

which gravitational pull has the greatest effect on tides?

Answers

Answer: The pull of the Moon's gravity on Earth is the primarily cause of tides and the pull of the Sun's gravity on Earth is the secondary cause. The Moon has a greater effect because, although it is much smaller than the Sun, it is much closer. The Moon's pull is about twice that of the Sun's.

7. Sally's mass on Earth is 50 kg. What is her weight on the moon?
The acceleration due to gravity she experiences on the moon is 1.652
a. 490 N
b. 8.3 kg
c. 50 kg
d. 82.6 N

Answers

Answer:

82.6

Explanation:

a wave is recalling with a speed of 5m/s for 7 seconds. How far has the wave travelled?

Answers

Answer:

35m

Explanation:

Take the speed of 5m/s and multiply that by 7 seconds. You get 35m

What is Flexibility ?​

Answers

ANSWER

=> Flexibility is the ability of a joint or series of joints to move through an unrestricted, pain free range of motion.

A roller is pushed with a force of 100 N along its handle, which is at an angle of 60 degrees with the horizontal. Find the work done in moving it through 20 m?

Answers

Answer:

1 kJ

Explanation:

By definition of work, [tex]W = \vec F \cdot \vec x = |\vec F| |\vec x| cos\angle Fx[/tex]. Let's replace the values: [tex]W = 100N\cdot 20m \cdot cos 60 = 1000 J[/tex]

ONE QUESTION :)

please answer only if you truly know!!

Answers

Answer:

Option F is the correct answer.

Explanation:

2 + x = 5

=> x = 3 m/s down the hill

Option F is correct.

Based on the chemical equation, use the drop-down menu to choose the coefficients that will balance the chemical equation:

Answers

Answer:

its in this order 2,1,1

Explanation:

trust me bro

Answer:

221 is the actual answer

Explanation:

dont trust the person above me

What is the correct description for an element?

A. Elements are made of two or more different types of atoms, chemically joined together

B. Elements are made up of one type of atom only

C. Elements are made of two or more types of atoms, not chemically joined

Answers

Answer:

B

Explanation:

Elements are made up of one type of atom only

The tiny planet Mercury has a radius of 2400 km and a mass of 3.3 times 10^23 kg.
a) What would be the gravitational acceleration of an astronaut standing on
the surface of Mercury? b) Compare the motion of a ball dropped on the
surface of Mercury to that of a ball dropped on Earth.

Answers

Answer:

I think that you need the gravitational acceleration of mercury

so we will use Newton's gravitational law :

gravitational acceleration = G*m/2

G is the gravitational constant = G = 6.673×10^-11 N m^2 kg^-2

after substitution : m^7x r67 / 11

6.673×10^-11 * 3.2x10^23 / (2.43x10^6)^2

using calculator : 2.00007899999

gravitational acceleration of mercury = 3.61625 m/s^2

pls give me brainliest

Explanation:

I need help! Use your observations to support or reject this claim "If the samples are at the same temperature, the amount of thermal energy in a sample depends on the type of material and the amount of the material" Its the Phet Lab

Answers

Answer:

i cannot see the the claim

Explanation:

A train travels 9 meters in the first second of travel, 9 meters again during the second second of travel, and 9 meters again during the third second. What is its acceleration?

Answers

Answer:

Zero

Explanation:

Acceleration is defined as the rate of change in speed. The speed during the first second is 9m/1s = 9m/s. During the second second is again 9m/1s = 9m/s and again 9m/s for the third second. Being the speed the same, the acceleration is 0

A group of students is investigating whether wheels affect the force of friction. The students push two boxes each with the same force on a table. One box has wheels and the
other does not have wheels. The distance traveled by each box is shown.
Experimental Observations
Student 1 Student 2 Student 3 Student 4
Distance traveled by box with wheels
24 cm
22 cm
20 cm
23 cm
Distance traveled by box without wheels
12 cm
14 cm
15 cm
13 cm
Which step should the students take next?
Make a hypothesis
Test another variable
Analyze the results
Share their conclusion

Answers

C. analyze the results....

Mechanical waves form when a source of energy causes a medium to what

Answers

Answer:

Ripple in water is a surface wave. A mechanical wave is a wave that is an oscillation of matter, and therefore transfers energy through a medium. While waves can move over long distances, the movement of the medium of transmission —the material—is limited.

Convert 9/4 hours into minutes

Answers

Am guessing;

9/4 × 60/1 =135

Watch the video and make a ninja star. Once you have made a ninja star, 5 Point Ninja Star. Explain the energy transfer in the ninja star once it has been assembled.
PLEASE HELP​

Answers

There is no video attached lol maybe put the transcript in the comments if there is a person explaining it

Answer:

kinetic energy because it is movement

Explanation:

Which type of electromagnetic radiation is useful in communications technology?
A. X-rays
B. visible light
C. radio waves
D. ultraviolet radiation

Answers

Radio waves: they are present in radios and also walkie-talkies

A plane is flying through the sky at a constant speed. The thrust of the aeroplane (making it go forwards) is 100N. Air resistance is also acting on the plane. What must the resultant (overall) force be on the plane?

A: 0N
B: 50N
C: 100N
D: 150N

Answers

Answer: 0N

Explanation: Hope this helps :)

last time i wrote the wrong answer for the wrong problem :)

For the constant speed, the resultant force on the plane is 0N. So, the correct option is A.

What is Force?

A force is defined as the parameter that can change the momentum of an object that can cause an object with mass to change its velocity, i.e., to accelerate. Force can also be described intuitively as a push or pull where force has both magnitude and direction, making it a vector quantity.

For above given information, the plane is moving at a constant speed. According to Newton's first law, the net external force on the aircraft due to the thrust generated by the propeller must be zero and air resistance is equal and in opposite directions to produce zero net force.

Thus, for the constant speed, the resultant force on the plane is 0N. So, the correct option is A.

Learn more about Force, here:

https://brainly.com/question/26115859

#SPJ2

Other Questions
What type of work is growing fastest in the United States?teachingagricultureheavy manufacturinginformation-related Connect and ReflectReflect on the events during the Progressive Era and the reforms that resulted. How have the events changed ornot changed your understanding of the United States today? 1) Which of these accurately reflects a WEAKNESS in the Articles of Confederation?A) Congress taxed citizens too much.B) There was no separation of powers.C) The document was too easily amended by the states.D) The central government held too much power over the states. Look at the diagram. Name organ 4. Which relation is a function? what is a good use of 385 protocol in English That's the woman ___________Jim used to be married to. *A. himB. whoC. whomD. when what are two things that you can do to increase the kinetic energy of an object 7. a) Find the value of x. (3 pts)b) Find mBc) Find mX380x + 2Mathits.comcoloso What happens to the value of y in the following equation as the value of x increases, where x is a whole number?y = x 2 + 4 You may receive a ticket for driving at the posted speed limit: Find the values for a, b, and c for this quadratic equation. -3x^2 - 5x = 1 write on the mechanism of hearing and balancing of the ear Martha, Jose y yo ___ unos tacos Measuring the current flow required by a horn requires that the ammeter be connected to the circuit_____ and the horn button be depressed by an assistant. plz help i need someone PLS HELP!!! WILL GIVE BRAINLIEST 1. Underline the complete subject and circle the complete predicate.The football team lost the game. ill give brainlestWhat are three influences that led to the development of amusement parks and theme parks? Evaluate and describe some of the ways that these influences helped shape modern amusement and theme parks. Make u the subject of formula in M=m(v-u).u