Answer:
you can use math as a banker, a doctor, a scientist, the president probably uses math, you use math to see how much less juice you gave your sibling, and you can use math to help in collage! (sorry if its wrong tell me if it is)
Answer: Isn't it because we use it daily especially with financial needs, scientific research, and the way people even use it to cook
Explanation: Therefore everything, especially in physics where you determine what density, distance, and equations following the scientific research.
In an experiment, a research collected the following informationabout a solution made from a certain
food. What can we conclude about the food?
• pH = 3.0
• Taste = Sour
A. Acid
B. Base
C. Neutral
D. Salt
Answer:
salt
Explanation:
carter found the rock shown in the picture below near a river
Answer:
there's no picture
Explanation:
and what would the question be anyways?
Answer:
what is the question
Explanation:
A baseball is thrown at an angle of 25 degrees relative to the ground at a speed of 23 m/s. If the ball was caught 42 m from the thrower:
What is the initial vertical velocity?
What is the initial horizontal velocity?
How long was it in the air?
How high did the ball travel before being caught?
Answer:
a) [tex] v_{0y} = 9.72 m/s [/tex]
b) [tex] v_{0x} = 20.85 m/s [/tex]
c) [tex] t = 2.01 s [/tex]
d) [tex] h_{max} = 4.82 m [/tex]
Explanation:
a) The initial vertical velocity is given by:
[tex] v_{0y} = v*sin(\theta) [/tex]
Where:
θ: 25°
v: is the magnitude of the speed = 23 m/s
[tex] v_{0y} = 23 m/s*sin(25) = 9.72 m/s [/tex]
b) The initial horizontal velocity can be calculated as follows:
[tex] v_{0x} = v*cos(\theta) = 23 m/s*cos(25) = 20.85 m/s [/tex]
c) The flight time can be calculated using the following equation:
[tex] v_{0x} = \frac{x}{t} [/tex]
Where:
x: is the total distance = 42 m
[tex] t = \frac{x}{v_{0x}} = \frac{42 m}{20.85 m/s} = 2.01 s [/tex]
d) The maximum height is given by:
[tex] v_{fy}^{2} = v_{0y}^{2} - 2gh_{max} [/tex]
Where:
[tex] v_{fy}[/tex]: is the final vertical velocity =0 (at the maximum heigth)
g: is the gravity = 9.81 m/s²
[tex]h_{max} = \frac{v_{0y}^{2}}{2g} = \frac{(9.72 m/s)^{2}}{2*9.81 m/s^{2}} = 4.82 m[/tex]
I hope it helps you!
Help !! I hate science
Answer:
iron nail rusting
Explanation:
a golf ball with a velocity 40 at an angle 45 degree speed of bthe ball after 2 sec
Answer:
Vertical velocity = 8.28 m/s
Horizontal velocity = 28.3 m/s
__________________________________________________________
We are Given:
Initial velocity of the ball = 40 m/s
Angle of elevation of the ball = 45°
Time interval = 2 seconds
__________________________________________________________
Vertical and Horizontal Components:
Vertical Component:
The vertical component of the ball can also be written as:
40*Sin(45°)
40*(1/√2) [since Sin(45°) = 1/√2]
40/√2 m/s
Horizontal Component:
The horizontal component of the ball can also be written as:
40*Cos(45°)
40*(1/√2) [Since Cos(45°) = 1/√2]
40/√2 m/s
__________________________________________________________
Speed of the Ball after 2 seconds:
Horizontal Velocity:
Since the horizontal velocity is not affected by any force during the flight, the horizontal velocity after 2 seconds will also be 40/√2 m/s
Since √2 = 1.41:
Horizontal velocity = 28.3 m/s
Vertical Velocity:
v = u + at [First equation of motion]
v = 40/√2 + (-10)(2)
[g is negative because it is acting against the direction of motion]
v = 40/√2 - 20
v = [tex]\frac{40-20\sqrt{2} }{\sqrt{2} }[/tex] [taking the LCM]
v = 8.28 m/s [√2 = 1.41]
A ball is thrown vertically upwards from the ground with an initial velocity of 50m/s. What is the total time by the ball to get its maximum height? (take g=10)
A. 500s
B. 50s
C. 5s
D. 0.5s
Explanation:
initial velocity (u) = 50m/s
final velocity (v) = 0m/s
i.e the ball stops for a while at its maximum height.
g = 10m/s^2
from the 1st equation of vertical upward motion:
v = u - gt
hence t = (v + u)/t
t = (0 + 50)/10
t = 50/10 = 5s.
C. 5s.
Answer:
c
Explanation:
(a) Initial velocity of ball (u)=50m/s, acceleration of ball =−g,
final velocity at the highest point (v)=0
So applying the 3rd equation of motion we get:
v
2
=u
2
−2gh
max
⇒0=50
2
−2×10×h
max
⇒h
max
=
20
2500
=125m
(b) Let the time required to reach max height be t. Then applying 1st equation of motion we get:
v=u−gt
⇒0=50−10t
⇒t=5s
(c) Let speed at half of max height be V then:
V
2
=50
2
−2g
2
125
⇒V
2
=2500−1250=1250
⇒V=
1250
=35.35m/s.
What is the density of the paint if the mass of a tin containing 5000 cm3 paint is 7 kg. If the mass of the empty tin, including the lid is 0.5 kg.
We are given:
Mass of the Paint bucket (with paint) = 7000 grams
Mass of the paint bucket (without paint) = 500 grams
Volume of Paint in the Bucket = 5000 cm³
Mass of Paint in the Bucket:
To get the mass of the paint in the bucket, we will subtract the mass of the bucket from the mass of the paint bucket (with paint)
Mass of Paint = Mass of Paint bucket (with paint) - Mass of the paint Bucket (without paint)
Mass of Paint = 7000 - 500
Mass of Paint = 6500 grams
Density of the Paint:
We know that density = Mass / Volume
Density of Paint = Mass of Paint / Volume occupied by Paint
Density of Paint = 6500/5000
Density of Paint = 1.3 grams / cm³
Rocks that do not allow water to pass through them are said to be impermeable. True or false?
Answer:
true plz mark me as the brainliest
Explanation:
Answer:
TrueSome rocks have pores in them, which are empty spaces. If these pores are linked then fluid can flow through the rock.However,if the pores are not linked,then no liquid can flow through the rocksWhen pores are not linked,the rock is permiable.n
why cant halleys comet be seen from earth only for about one year of its 76-year orbit
Answer:
Halley's comet will next appear in the night sky in the year 2062. It orbits the sun every 75-76 years, so this is the time between appearances.
How does cold water affect the speed of dissolving?
A. Cold water slows down dissolving
B. Cold water speeds up dissolving
C. Cold water has no effect on dissolving
D. Cold water completely stops dissolving
Answer:
Cold water slows down dissolving
Cold water slows down dissolving. Hence, option (A) is correct.
What is the relationship between the solubility and the temperature?The basic relationship between solubility and temperature is as follows: A solid will dissolve more readily at higher temperatures.
Likewise, a solid element dissolves more slowly at lower temperatures. This is all due to the solvent becoming more and more excited by the heat, making it easier for it to split or break apart entirely.
for while in gases The solubility of gases decreases more rapidly as temperature rises. A gas is more soluble in water when the temperature is lower.
Henry's law, which states that the gas becomes more soluble as the pressure above the liquid solution increases, summarizes another characteristic of gas solutes.
Learn more about solubility here:
https://brainly.com/question/29661360
#SPJ2
Calculate the ideal mechanical advantage of a pair of scissors where the length of the blade is 5 cm and the length of the handle is 2.5 cm.
Answer:
m = 0.5
Explanation:
Given that,
The length of the blade of scissors = 5 cm
The length of the handle = 2.5 cm
Here, effort arm is 2.5 cm and load arm is 5 cm. The mechanical advantage is the ratio of effort arm to the load arm as follows :
[tex]m=\dfrac{2.5}{5}\\\\m=0.5[/tex]
So, the ideal mechanical advantage of a pair of scissors is 0.5.
The elements of art were created by artists based on things we see in real life. For example, texture on trees or the order of colors in the rainbow.
Question 1 options:
True
False
Answer:
true
Explanation:
just took the best its true
Answer:
True
Explanation:
I took the quiz and got it correct
Lab report of experimrnt to find the series resonance of acceptor circuit and parallel resonance of rejector circuit in RLC?
Answer:
afgiknvdeyiknvxwtuinvdruincdyukn
If an object is traveling in a straight line moving East then the following is true.
A distance is equal to displacement
B distance is greater than the displacement
C distance is less than the displacement
D distance is a value and displacement is equal to 0
Answer:
A distance is equal to displacement
Explanation:
An object traveling in a straight line moving East will have its displacement value to be equal to the distance.
Displacement is the distance traveled in a specific directions.
Distance is the total length of path traveled.
The displacement of the object is the value of the distance due east.
The distance is the value of the length of path covered.
A trip is taken that passes through the following points in order
Point A 0 m
Point B 15.0 m
Point C -30.0 m
Point D -20.0 m
Point E 10.0 m
Point F 5.0 m
What is the distance from Point C to Point F?
Answer:
35, I got you bro, i got you
A solid keeps its shape due to which of the following factors?
Space between particles
Attractive forces between particles
The type of element in the solid
The container it is placed in
Answer:
c
Explanation:
because whatever elements are used like gas uses water evaporation so yeah
Answer:
(A) Space between particles!
Explanation:
Solids can hold their shape because their molecules are tightly packed together!
✞ Bye Have A Nice Day! ✞
A spring is hanging from the ceiling. When a 250 gram of mass is attached to the free end, the spring elongates by 5 cm. The spring constant (in N/m) is:
Answer:
k = 49 N/m
Explanation:
Given that,
Mass, m = 250 g = 0.25 kg
When the mass is attached to the end of the spring, it elongates 5 cm or 0.05 m. We need to find the spring constant. Let it is k.
The force due to mass is balanced by its weight as follows :
mg=kx
[tex]k=\dfrac{mg}{x}\\\\k=\dfrac{0.25\times 9.8}{0.05}\\\\k=49\ N/m[/tex]
So, the spring constant of the spring is 49 N/m.
A heavy bank-vault door is opened by the application of a force of 300 N directed perpendicular to the plane of the door at a distance of 0.80 m from the hinges. What is the torque?
Question 4 options:
1.) 120 Nm
2.) 240 Nm
3.) 375 Nm
4.) 300 Nm
Answer:
240Nm
Explanation:
Given parameters:
Force on the bank vault = 300N
Distance to the plane of the vault = 0.8m
Unknown:
Torque = ?
Solution:
Torque is the component of force that causes an object to rotate about an axis;
Torque = Fr x sinФ
Here Ф = 90°
r = distance
Torque = 300 x 0.8 x Sin 90°
Torque = 240Nm
Ken Griffey, Jr's warehouse shot in the 1933 home run derby travelled 93 feet per second for 5 seconds. How far did he hit the ball?
Answer:
465 feet because 93*5 = 465, btw that was 1993 not 1933
Explanation:
Pablo and Charles were conducting an investigation where they were measuring the energy of a glass marble as it rolled down a ramp. According to their calculations, the total energy of the marble decreased.
Which statement below is the best explanation for the decrease in total energy?
Answer:
it will be B
Explanation:
Answer:
The energy decreased because heat resulted from the friction between the marble and the ramp.
Explanation:
I think its this answer because i think is has somthing to do with friction
Which chemicals are major contributors to ozone layer destruction? Select two answer choices.
Answer:
what are the answers to select? or do you just say them
Explanation:
???
Answer:
c and d
Explanation:
When are zeros significant when found in front of (to the left) of the decimal point?
Answer:
If a zero is found between important digits, it is important. Zeros are also used as (not salient) holders to the left of digits if the number is in fact a decimal. Example from www.rpi.edu: , a mass of 42 g has two significant digits. Expressed in kilograms, the mass of 0.042kg should still have two significant digits.
Explanation:
Zeros are also used as (not salient) holders to the left of digits if the number is in fact a decimal. Example from www.rpi.edu: "A mass of 42 g has two significant digits. Expressed in kilograms, the mass of 0.042kg should still have two significant digits."
Hope this comes in handy, have a great day!
explain four contributory factors of unequal access to basic resources
Answer:
Answer. The big five factors of poverty (as a social problem) include: ignorance, disease, apathy, dishonesty and dependency. These, in turn, contribute to secondary factors such as lack of markets, poor infrastructure, poorleadership, bad governance, under-employment, lack of skills, lack of capital, and others.
A box is being pushed by two stellar science students, one on each side of the box. Delfino is pushing
the box with a force of 10 N to the left. Aleida is pushing the box with a force of 15 N to the right. Who is
the stronger individual and what is the net force and direction on the box.
Explanation:
It is given that,
Delfino is pushing the box with a force of 10 N to the left. Aleida is pushing the box with a force of 15 N to the right.
Aleida is exerting more force. He is the more stronger individual.
Net force is given by :
F = -10+15
F = 5 N
So, the net force is 5 N and it is in right direction.
How does temperature effect density and the flow of convection currents?
Answer:
Convection
Explanation:
Convection is heat transfer due to a density differential within a fluid. As water's temperature increases in the presence of a heat source, it will become less dense and rise. As it moves up and away from the heat source, it cools and becomes more dense and sinks.
5. The most dangerous place to use electrical equipment is?
A) indoors
B) outdoors
near water
D
near other electrical equipment
Answer:
c near water
Explanation:
because well let's say you were out in the rain or ur at an outdoor pool swimming and all of a sudden lighting strikes the water while ur in it...... then you would barely be living bc electric touched water
Do someone know the answer
John doe gets on the highway in his 1967 Shelby 427 Cobra starting from the dead stop at the bottom of the on ramp of it can be assumed that John accelerates at a rate of 6.7 m s2 how long does it take for John to reach the speed of 30 m s?
Answer:
It will take john 4.477 seconds
The modulus of elasticity for a ceramic material having 4.7 vol% porosity is 317 GPa. (a) Calculate the modulus of elasticity (in GPa) for the nonporous material.
Answer:
The answer is below
Explanation:
a) Given that the modulus of elasticity (E) = 317 GPa, to find the modulus of elasticity (in GPa) for the nonporous material ([tex]E_o[/tex]), we use the formula:
[tex]E_0=\frac{E}{1-1.9P+0.9P^2}\\\\where\ P=4.7\%=0.047,hence:\\\\ E_0=\frac{317}{1-1.9(0.047)+0.9(0.047)^2}\\\\E_0=347.3\ GPa[/tex]
b) If the porosity P = 11.1%, then the modulus of elasticity is:
[tex]E=E_0(1-1.9P+0.9P^2)=347.3(1-1.9(0.111)+0.9(0.111)^2)=278\ GPa[/tex]
30 points! to who helps me out