How did Jesseca Kusher create her new material?

Answer:

b. the amount of heat given off or absorbed

Explanation:

Hello,

In this case, we should take into account a formal definition of enthalpy change such as an energetic change that occurs in a system when matter is transformed by a given chemical reaction from reactants to products. Thus, such energetic change is macroscopically exhibited and it is related with either a temperature increase or decrease; it means that if a reaction exhibits a temperature increase, we say that heat was given off and if the temperature exhibits a decrease, we say that heat is absorbed. For that reason, answer is b. the amount of heat given off or absorbed.

Regards.

Answer:

False

Explanation:

The reaction rate increases if the temperature also increases, as does the concentration of ractives or the presence of catalysts.

The reaction rate talks about how reagents are converted into products as a function of time, this process can take less or more depending on the factors to which the reaction is exposed.

The increasing temperature generates an increase in the kinetic energy of the particles, promoting their proximity and their reaction between them to be able to give the final product, so a faster reaction occurs, which is why it has promoted when the particles collide.

Answer:

6.93

Explanation:

Step 1: Given data

Step 2: Convert the temperature to the Kelvin scale

We will use the following expression.

K = °C + 273.15

K = 50°C + 273.15

K = 323 K

Step 3: Calculate K

We will use the following expression.

∆G° = -R × T × ln K

-5.20 × 10³ J = -(8.314 J/mol.K) × 323 K × ln K

K = 6.93

Answer:

[tex]1.242 \times 10^{25}\text{ atoms H}[/tex]

Explanation:

You must convert the mass of B₄H₁₀ to moles of B₄H₁₀, then to molecules of B₄H₁₀, and finally to atoms of H.

1. Moles of B₄H₁₀

[tex]\text{Moles of B$_{4}$H}_{10} = \text{110.0 g B$_{4}$H}_{10} \times \dfrac{\text{1 mol B$_{4}$H}_{10}}{\text{53.32 g B$_{4}$H}_{10}} = \text{2.063 mol B$_{4}$H}_{10}[/tex]

2. Molecules of B₄H₁₀

[tex]\text{No. of molecules} = \text{2.063 mol B$_{4}$H}_{10} \times \dfrac{6.022 \times 10^{23}\text{ molecules B$_{4}$H}_{10}}{\text{1 mol B$_{4}$H}_{10}}\\\\=1.242 \times 10^{24}\text{ molecules B$_{4}$H}_{10}[/tex]

3. Atoms of H

[tex]\text{Atoms of H} = 1.242 \times 10^{24}\text{ molecules B$_{4}$H}_{10} \times \dfrac{\text{10 atoms H}}{\text{1 molecule B$_{4}$H}_{10}}\\\\= \mathbf{1.242 \times 10^{25}}\textbf{ atoms H}[/tex]

Answer: C) [tex]CO^{2-}_{3}[/tex]

Explanation: The Valence Shell Electron Pair Repulsion Model (VSEPR Model) shows bonding and nonbonding electron pairs present in the valence, outermost, shell of an atom connecting to other atoms. It also gives the molecular geometric shape of a molecule.

To determine molecular geometry:

1) Draw Lewis Structure, i.e., a simplified representation of the valence shell electrons;

2) Count the number of electron pairs (count multiple bonds as 1 pair);

3) Arrange electron pairs to minimise repulsion;

4) Position the atoms to minimise the lone pair;

5) Name the molecular geometry from the atom position;

Trigonal planar molecular geometry is a model which molecule's shape is triangular and in one plane. Such molecule has three regions of electron density extending out from the central atom and the repulsion will be at minimum when angle between any two is 120°.

The Lewis structure of each molecule is shown in the attachment.

Analysing each one, it can be concluded that molecule with trigonal planar geometry is [tex]CO^{2-}_{3}[/tex]

The given question is incomplete. The complete question is:

Compound X has a molar mass of 153.05 g/mol and the following composition:

element mass %

carbon 47.09%

hydrogen 6.59%

chlorine 46.33%

Write the molecular formula of X.

Answer: The molecular formula of X is [tex]C_6H_{10}Cl_2[/tex]

Explanation:

If percentage are given then we are taking total mass is 100 grams.

So, the mass of each element is equal to the percentage given.

Mass of C= 47.09 g

Mass of H = 6.59 g

Mass of Cl = 46.33 g

Step 1 : convert given masses into moles.

Moles of C =[tex]\frac{\text{ given mass of C}}{\text{ molar mass of C}}= \frac{47.09g}{12g/mole}=3.92moles[/tex]

Moles of H =[tex]\frac{\text{ given mass of H}}{\text{ molar mass of H}}= \frac{6.59g}{1g/mole}=6.59moles[/tex]

Moles of Cl =[tex]\frac{\text{ given mass of Cl}}{\text{ molar mass of Cl}}= \frac{46.33g}{35.5g/mole}=1.30moles[/tex]

Step 2 : For the mole ratio, divide each value of moles by the smallest number of moles calculated.

For C = [tex]\frac{3.92}{1.30}=3[/tex]

For H = [tex]\frac{6.59}{1.30}=5[/tex]

For Cl =[tex]\frac{1.30}{1.30}=1[/tex]

The ratio of C : H: Cl= 3: 5 :1

Hence the empirical formula is [tex]C_3H_5Cl[/tex]

The empirical weight of [tex]C_3H_5Cl[/tex] = 3(12)+5(1)+1(35.5)= 76.5g.

The molecular weight = 153.05 g/mole

Now we have to calculate the molecular formula.

[tex]n=\frac{\text{Molecular weight }}{\text{Equivalent weight}}=\frac{153.05}{76.5}=2[/tex]

The molecular formula will be=[tex]2\times C_3H_5Cl=C_6H_{10}Cl_2[/tex]

Answer:

Yes

Explanation:

The balanced equation of the reaction is;

FeBr2 (aq) + Cl2 (g) → FeCl2 (aq) + Br2 (aq)

This reaction is possible because chlorine is more electronegative than bromine and can displace it from its salt.

In group seventeen, electro negativity decreases down the group. Hence as we move down the group, elements become less electronegative and can be displaced from their salt by more electronegative elements found earlier in the group.

Hence chlorine can displace bromine in FeBr2 to form FeCl2.

Answer:

Yes, because Cl2 has higher activity than Br2

Explanation:

Answer:

[tex]M_{acid}=0.141M[/tex]

Explanation:

Hello,

In this case, the reaction between sulfuric acid and hydroxide is:

[tex]H_2SO_4+2NaOH\rightarrow Na_2SO_4+2H_2O[/tex]

We can notice a 1:2 molar ratio between the acid and the base respectively, therefore, at the equivalence point we have:

[tex]2*n_{acid}=n_{base}[/tex]

And in terms of volumes and concentrations:

[tex]2*M_{acid}V_{acid}=M_{base}V_{base}[/tex]

So we compute the molarity of sulfuric acid as shown below:

[tex]M_{acid}=\frac{M_{base}V_{base}}{2*V_{acid}} =\frac{0.100M*28.15mL}{2*10.0mL}\\ \\M_{acid}=0.141M[/tex]

Best regards.

Answer:

Mass = 11.688g

Explanation:

Volume = 2.00L

Molar concentration = 0.100M

Mass = ?

These quantities are relatted by the following equation;

Conc = Number of moles / volume

Number of moles = Conc * Volume = 2 * 0.100 = 0.2 mol

Number of moles = Mass / Molar mass

Mass = Number of moles * Molar mass

Mass = 0.2mol * 58.44g/mol

Mass = 11.688g

Answer:

C) 237.96682 amu

Explanation:

The symbol for neptunium-236 is given as;

²³⁶₉₃Np

This element has 93 protons and (236 - 93 = 143) neutrons.

Mass Number =Total mass of Protons + Total mass of neutrons

Total Mass pf protons = 93 * 1.007825 amu, = 93.727725 amu

Total mass of Neutrons = 143 * 1.008665 amu = 144.239095 amu

Mass = 144.239095 + 93.727725  = 237.96682 amu

Correct option is option C.

Answer:

The empirical formula of the compound is NO2.

Explanation:

The following data were obtained from the question:

Mass of compound = 30.5 g

Mass of nitrogen (N) = 9.29 g

Empirical formula of compound =?

Next, we shall determine the mass of oxygen in the compound. This can be obtained as follow:

Mass of compound = 30.5 g

Mass of nitrogen (N) = 9.29 g

Mass of oxygen (O) =?

Mass of O = mass of compound – mass of N.

Mass of O = 30.5 – 9.29

Mass of O = 21.21 g

Finally, we shall determine the empirical formula of the compound as follow:

Mass of nitrogen (N) = 9.29 g

Mass of oxygen (O) = 21.21 g

Divide by their molar mass.

N = 9.29 / 14 = 0.664

O = 21.21 / 16 = 1.326

Divide by the smallest

N = 0.664/ 0.664 = 1

O = 1.326/ 0.664 = 2

Therefore the empirical formula of the compound is NO2.

Answer:

-2, -2 and 0.

- Respiration is a process in which energy is produced and photosynthesis is a process in which energy is used.

Explanation:

Hello,

In this case, oxygen is a substance that is used for animals and us to acquire the energy necessary for several functions by the cellular respiration (we also need glucose), besides, it is a product of the photosynthesis carried out by vegetable cells (plants). Moreover, carbon dioxide and water are used by the plants to produce oxygen we need as well as glucose via the aforementioned photosynthesis, thus, both chemical reactions are shown below:

[tex]C_6H_{12}O_6+6O_2\rightarrow 6CO_2+6H_2O\ \ \ respiration\\\\6CO_2+6H_2O\rightarrow C_6H_{12}O_6+6O_2\ \ \ photosynthesis[/tex]

In such a way, since the oxygen in carbon dioxide and water has an oxidation state of -2 (reduced form) we can say that the respiration is a process in which energy is produced and since the oxygen yielded during the photosynthesis has an oxydation state of 0, we can say that photosynthesis is a process in which energy is used.

Best regards.

The advantage of a resource person would be that it will provide a hands-on activity that will allow the students to experience spacing between organs and on the body of the person.

It will also allow them to identify challenges when doing this and will engage them more in the activity and lesson.

Answer:A resource person add knowledge to the course

Explanation:

Answer:

Oxidation half equation;

3Cd(s) -------> 3Cd^2+(aq) + 6e

Reduction half equation;

2In^3+(aq) + 6e -----> 2In(s)

Explanation:

Since the reduction potentials of Indium and Cadmium are -0.34 V and - 0.40 V respectively, we can see that cadmium will be oxidized while indium will the reduced.

We arrived at this conclusion by examining the reduction potential of both species. The specie with more negative reduction potential is oxidized in the process.

Oxidation half equation;

3Cd(s) -------> 3Cd^2+(aq) + 6e

Reduction half equation;

2In^3+(aq) + 6e -----> 2In(s)

Answer:

The rms speed of its molecules becomes. (T) has become four times. Therefore, v_(rms) will become two times,...

Answer:

Major product does not undergo oxidation since it is a tertiary alcohol whereas minor product undergoes oxidation to ketone as it is  secondary alcohol.

Explanation:

Hello,

In this case, given the attached picture, the hydration of the 1 methylcyclohexene yields to alcohols; 1-methylcyclohexan-1-ol and 1-methylcyclohexan-2-ol. Thus, since the OH in the 1-methylcyclohexan-1-ol (major product) is bonded to a tertiary carbon (bonded with other three carbon atoms) it is not able to increase the number of oxygen bonds (oxidation) as it already attained the octet whereas the 1-methylcyclohexan-2-ol (minor product) is able to undergo oxidation to ketone as the carbon bonded to it is secondary (bonded with other two carbon atoms), so one extra bond the oxygen is allowed to be formed to carbonyl.

Best regards.

Answer:

hbchbjH j jas a aa  a s ds d as das

Explanation:

Answer:

[tex]Cd(s)|Cd^{2+}(aq) || Cu^{2+}(aq)|Cu(s)[/tex]

Explanation:

A galvanic cell is composed of two electrodes immersed in a suitable electrolyte and connected via a salt bridge. One of the electrodes serves as a cathode where reduction or gain of electrons takes place. The other half cell functions as an anode where oxidation or loss of electrons occurs.

The representation is given by writing the anode on left hand side followed by its ion with its molar concentration. It is followed by a salt bridge. Then the cathodic ion with its molar concentration is written and then the cathode.

As it is given that cadmium acts as anode, it must be on the left hand side and copper must be on right hand side.

[tex]Cd(s)|Cd^{2+}(aq) || Cu^{2+}(aq)|Cu(s)[/tex]

Answer:

[tex]\huge\boxed{Density}[/tex]

Explanation:

This is because of density. Since Ice is less dense than water, the ice even formed inside the pond then starts floating on the surface of water. Because of this density, Ice floats on water and thus the water freezes at the surface.

Answer:

Density

Explanation:

Water is less dense as a solid than as a liquid, so as ponds freeze, the ice floats at the top and the pond freezes from the top-down.

Answer:

1.543 pounds = 700 grams

Answer:

C) SO3

Explanation:

Lewis formula shows the bonding between atoms of a molecule and expresses the lone pair present in the atoms.

SO3 or Sulfur trioxide cannot be adequately described by a single Lewis formula because it has majorly 3 resonance structures because Sulfur does not follow the octet rule and can expand electrons in its outer shell.

Hence, the correct answer is C) SO3

Answer:

D) 65.7%

Explanation:

Based on the reaction:

2H2(g)+O2(g)⟶2H2O(l)

2 moles of hydrogen produce 2 moles of water assuming an excess of oxygen.

To find percent yield of the reaction we need to find theoretical yield (The yield assuming all hydrogen reacts producing water). With theoretical yield and actual yield (32.8g H₂O) we can determine percent yield as 100 times the ratio between actual yield and theoretical yield.

Theoretical yield:

Moles of 5.58g H₂:

5.58g H₂ ₓ (1 mol / 2.016g) = 2.768 moles H₂

As 2 moles of H₂ produce 2 moles of H₂O, if all hydrogen reacts will produce 2.768 moles H₂O. In grams:

2.768 moles H₂O ₓ (18.015g / mol) =

49.86g H₂O is theoretical yield

Percent yield:

Percent yield = Actual yield / Theoretical yield ₓ 100

32.8g H₂O / 49.86g ₓ 100 =

65.7% is percent yield of the reaction

Answer:

That means that if you are calculating entropy change, you must multiply the enthalpy change value by 1000. So if, say, you have an enthalpy change of -92.2 kJ mol-1, the value you must put into the equation is -92200 J mol-1

The entropy change in the surroundings associated with this reaction occurring at 25 degree C is calculated as ΔS = -ΔH/T J/K.

Entropy is a quantity which gives idea about the randomness or arrangement of atoms or molecules present in any sample.

Entropy change will be calculated as:
ΔS = -ΔH/T, where

ΔH = chnage in enthalpy (J/mole)

T = temperature (K)

So to calculate the entropy change first we have to know about the value of enthalpy in joules and then divide it by the temperature.

Hence the unit of entropy is joule per kelvin.

To know more about entropy, visit the below link:
https://brainly.com/question/6364271

The correct answer is 3 liters

Explanation:

If a substance has a solubility of [tex]12 \frac{grams}{liter}[/tex], this means in 1 liter, the grams that can be dissolved are 12 grams. Now, considering Justin and Ellie need to dissolve 36 grams to calculate the number of liters just divide the total of grams into 12 as each liter dissolves only 12 grams. The process is shown below:

36 grams (the amount that will be dissolved) ÷ 12 (grames dissolved per liter) = 3 liters (liters to dissolved 36 grams)

Answer:

It would be 3 liters

Explanation:

Answer:

mol LiCl = 4.83 m

Explanation:

GIven:

Solution of LiCl in water XLiCl = 0.0800

Mol of water in kg = 55.55 mole

Find:

Molality

Computation:

mole fraction = mol LiCl / (mol water + mol LiCl)

0.0800 = mol LiCl / (55.55 mol + mol LiCl)

0.0800 mol LiCl + 4.444 mol = mol LiCl

mol LiCl - 0.0800 mol LiCl = 4.444 mol

0.92 mol LiCl = 4.444 mol

mol LiCl = 4.83 m

Answer:

b.) Put on protective gloves

Answer:

2020 Put on protective gloves.

Explanation:

Answer:

B. pOH = 14 - pH and D. pH = 14 - pOH.

Explanation:

Hello,

In this case, we must remember that pH and pOH are referred to a measure of acidity and basicity  respectively, since pH accounts for the concentration of H⁺ and pOH for the concentration of OH⁻ in a solution. In such a way, since the maximum scale is 14, we say that the addition between the pH and pOH must be 14:

[tex]pH+pOH=14[/tex]

Therefore, the correct answers are B. pOH = 14 - pH and D. pH = 14 - pOH since the both of them are derived from the previous definition.

Best regards.

Answer:

D: by subtracting the pOH from 14.

Explanation:

Answer:

CHC12

Explanation:

i am not really sure i am onna do a quick research 4 u tho