Answer:
the elements are listed in order of increasing atomic number. The atomic number is the number of protons in the nucleus of an atom.In a periodic table arranged in order of increasing atomic number, elements having similar chemical properties naturally line up in the same column.
The elements on the periodic table are arranged on the basis of highlighting similarities between elements. Thus, the correct option for this question is A.
How elements are arranged on the periodic table?The elements on the periodic table are basically arranged on the basis of increasing their atomic number. These atomic number is represented by the number of protons in the nucleus of an element.
According to the question, the elements possessing identical chemical properties are arranged in the same group. For example, group 17 is known as the halogen group. Among this group, the elements bear one electron short to fulfill their octet.
The whole periodic table comprises of 18 groups and 7 periods.
Therefore, the elements on the periodic table are arranged on the basis of highlighting similarities between elements. Thus, the correct option for this question is A.
To learn more about the Periodic table, refer to the link:
https://brainly.com/question/15987580
#SPJ2
The periodic table below shows major regions in different colors. Which answer choice describes the noble gases?
A. All of the elements of Period 1 in orange boxes
B. The two separate rows of elements in dark and light blue boxes at the bottom
C. All of the elements in green boxes
D. All of the elements of Group 18 in orange boxes
Answer:
D. all of the elements of Group 18 in orange boxes
Freezing water cracking limestone
a
Chemical Change
b
Physical Change
Answer:
Freezing water and cracking limestone are physical changes.
sound travels at 331m/s. How long would it take for sound to travel across lake tahoe, which is 21.6 miles long
Answer:
It would take sound 104.998 seconds to travel across lake tahoe.
Explanation:
First let's convert the miles to meters, so, 21.6 miles = 34754.4 meters
Now, we will divide this number in meters by 331. So, 34754.4 / 331 = 104.998
And what will the unit be? Seconds will be the unit for time here so 104.998 seconds.
What effect does fermented sugar have in beer brewing
Answer:
If the sugar concentration level of the must becomes too high at any given point--either at the beginning or during the fermentation--it starts to have an inhibiting effect on the yeast's ability to produce alcohol. In other words, the higher sugar concentration starts to act as a preservative effecting the fermentation in a negative way.
Explanation:
Fermentation is the process by which yeast converts the glucose in the wort to ethyl alcohol and carbon dioxide gas -- giving the beer both its alcohol content and its carbonation.
What can we say about
protons?
A. They are in the nucleus and never
leave.
B. They move around outside the nucleus.
C. They move in and out of the nucleus.
Answer:
A. They are in the nucleus and never leave.
Explanation:
Protons as well as neutrons are located in the nucleus of the atom.
hope this helps!
(Physical Science)
Which group of metals includes elements with one valence electron? (1 point)
A. alkaline earth metals
B. rare earth metals
C. alkali metals
D. transition metals
Answer:
C
Explanation:
alkali metals are the Group I elements, which have 1 electron in their valence shells
Answer:
Alkali metals are the elements which have only one valence electron in their outermost or ultimate shell.
Explanation:
Alkaline Earth metals have 2 valence electron in their outermost shell and readily give up their 2 electron to achieve stability.
Rare Earth Metals have 3 valence electron in their outermost shell and they have high magnetic moments and divert range of magnetic structure.
Alkali Earth metals have 1 valence electron.
Transition metals generally have 2 valence electron .
Learn more on:
https://brainly.com/question/3062525
what is the concentration of hydrogen ion, H+, present in a water sample if 100. ml of the sample requires 7.2 ml of 2.5 x 10 -3 M NaOH to be neutralized
Answer: 1.8x10^-4 M H+
Explanation: The number of moles of NaOH added to the 100 ml soultion will be equal to the number of moles of H+ present in that solution.
Moles NaOH in 7.2 ml of 2.5x10^-3 M NaOH
(2.5x10^-3 M NaOH) is the same as 2.5x10^-3 moles NaOH/liter
(2.5x10^-3 moles NaOH/liter)*(7.2 ml)*(1 liter/1000ml) = 1.8x10^-4 moles NaOH used to titrate 100 ml of the acid. That means there was 1.8x10^-4 moles of H^+ in 100 ml.
Concentration of H^+ = (1.8x10^-4 moles H)/0.100 l) = 1.8x10^-4 M H+
(pH of 3.74)
what is force ?write its effects.
Answer:A force is a push or pull upon an object resulting from the object's interaction with another object.
A force acting on an object causes the object to change its shape or size, to start moving, to stop moving, to accelerate or decelerate
SURELY SOMEONE HELP it’s urgent plllss I’ll brainlist u/5 star!!! answer the ones u know. :)
Answer:
3 exothermic reaction. only that much
Hi,
These are the answers.
• Question 2. C , Substance dissolves
• Question 3. D , Exothermic reaction
• Question 4. C , Endothermic reaction takes place
• Question 5. A , the products formed has more energy than reactants
Hope it helps you... pls mark brainliest if it helped you
underline and identify the parts of the text on this page that use examples of how the flow of the matter through a system is driven by energy and can do the work.
The parts of the text on the page that use examples of how the flow of matter through a system is energy driven and has the capacity to do work are;
1) The flow of water down rivers passing through hydro power dams to perform the following works;
River bank particle erosionElectric power generation2) The flow of electrons that corresponds to the flow of electricity (in the reverse direction) to perform the following works;
Light bulbs turn onTelevisions are powered3) The lifting of the hammer by the cam which gains gravitational potential energy that is converted to kinetic energy as the hammer drops
The hammer is repeatedly lifted and dropped by the cam to do the following work
Hammering a metal piece into shape4) The chemical potential energy stored in bonds by virtue of the relative atomic distances which produces kinetic energy from the chemical potential energy
Lear more about energy conversion here:
https://brainly.com/question/15105485
Calculate the no. of moles in 25gm of calcium phosphate
PLz Fast
answer/
1 grams Calcium Phosphate to mol = 0.00322 mol
no. of moles= 0.00322×25
no. of moles = 0.0805
Nhiệt phân hoàn toàn 1,88g Cu(NO3)2.Khí bay ra cho hấp thụ vào H2O tạo thành 2 l dd A. Dd A có pH= ?
Answer: theo mình thì mình làm như sau
cu(no3)2 nhiệt phân hết
\Rightarrow nNO2= 0,02mol
nO2=0,005mol
khi hấp thụ O2 và NO2 vào nước ta có
2NO2 + 1/2 O2\Rightarrow 2HNO3
phản ứng là vừa đủ nên
nHNo3= 0,02 mol
pH HNO3=2
khi cho 0,001mol NaOH vào thì phản ứng trung hòa
H+ + OH- \Rightarrow H20
nHNO3=0,02/20=0,001
nhận thấy nH+ =nOH- nên phản ứng vừa đủ
pH của dd Y=7
theo mình giải là như vậy
Explanation:
EASY 30 POINTS! PLS HELP ME T-T
1. True or false? All atoms in an element contain an identical number of neutrons.
2. An atom with a _______ charge has the same number of protons and electrons.
3. An atom that has a different number of electrons and protons is called a(n) _______.
Answer:
1.false
2.neutron
3.neutron
Answer:
1. false
2. zero
3. isotopes
hope it helps
Sorry for the spamming, but this question is URGENT here,
Which of the following is
property of metals?
A. brittle
B. good conductivity."
C. poor conductivity
(Btw here’s a picture :O)
Option B, Metals have good conductivity.
Hope it helps you.. pls mark brainliest if it helps you
please answer quick...................
Answer:
3). C
Explanation:
When inter-nuclear distance [ atomic radius ] is smaller, the nuclear attraction has a greater magnitude.
[tex].[/tex]
Express 0.021 in scientific
notation.
[ ? ]10
Answer:
0.021 in scientific notation is 2.1 x 10^-2
Explanation:
Since there are two zeros before the non-zero digits, 10 should be raised to -2.
hope this helps
Using scientific notation, one can express extremely big or extremely small values. When a number between 1 and 10 is multiplied by a power of 10, the result is represented in scientific notation. 0.021 in scientific notation is 2.1 x 10⁻².
A way to express numbers that are either too large or too little to be conveniently stated in decimal form is through scientific notation. It is also known as "scientific form" in Britain, because scientists, mathematicians, and engineers frequently use it for intricate calculations involving large numbers.
A condensed manner of writing numbers is known as scientific notation (also known as standard form). A number is represented by a number from 1 to less than 10, multiplied by a power of 10, when it is written in scientific notation.
To know more about scientific notation, visit;
https://brainly.com/question/16936662
#SPJ6
Plzzzzzz help me Write electronic configuratof sodium and chlorine in the term of subshell ?
Answer:
ans:Ne=2,8,1
ans:2,8,7
state two application of chemistry on each of the following:-
1.forensic
2.agriculture
3.industrial
4.millitary
5.space science
All the following process produces hematite except
A roasting of siderite
B oxidation of iron
C oxidation of magnetite
D drying of limonite
E no correct answer
Answer:
D)driying of limonite these is the answer
Compare and contrast the three types of mixtures (solutions, colloids, and suspensions).
Answer:
solutions is a homogenous mixture while colloids and suspensions are heterogeneous mixtures made up of 3 or more substances
Explanation:
homogeneous- made up of one thing
heterogeneous- made up of 2 or more things
If you burn a citronella candle near your picnic will it keep mosquitoes away
Answer:
Thanks!!!
Explanation:
Answer:
true
Explanation:
What is the control in the experiment?
Answer:
C. the amount of drug x given to mice
Multiple Choice Questions 1. Which of the following statement best describes an atom? A. Protons and electrons are grouped together in a random pattern. B. Protons and electrons are grouped together in an alternating pattern C. A core of protons and neutrons surrounded by electrons. D. A core of electrons and neutrons surrounded by protons. 2. Table 5.10 shows the atomic mass of four stable isotopes of an element X. 119
Answer:
C is Correct
Explanation:
Protons and Neutrons make up the Nucleus while Electrons surround the nucleus in circular orbits with continuous rotation.
Which of these are PHYSICAL changes?
А.
cutting, tearing, freezing, thawing, folding.
mixing without chemical changes
B.
burning, rusting, forming a new substance from
two different substances, exploding, cooking
Answer:
the answer to this problem is a
Chemical changes can change which properties of a substance?
Group of answer choices
Reactivity
Color
Malleability
All of the above
Answer:
» Reactivity and color
Explanation:
though color is very minor answer because it also relates to a physical property.
[tex].[/tex]
surely help:) I’ll brainlist!
Answer:
A. The product formed have more energy than the reactants.
This is because it is an endothermic reaction.
[tex].[/tex]
chất có ở đâu ? nước tự nhiên là chất hay hỗn hợp
Answer:
Water, H2O, is a pure substance, a compound made of hydrogen and oxygen. Although water is the most abundant substance on earth, it is rarely found naturally in its pure form. Most of the time, pure water has to be created. Pure water is called distilled water or deionized water.
What is the mass of six of these marbles? What is the volume? What is the
density?
Answer:
All right. So let's calculate the density of a glass marble. Remember that the formula for density is mass over volume. So if I know that the masses 18.5 g. And I know that the um volume is 6.45 cubic centimeters. I can go ahead and answer this to three significant figures. So it's going to be 2.87 grams per cubic centimeter. Okay, that's our density. Now, density is an intensive process. Okay. We're an intensive property. I really should say. It doesn't depend on how much you have. Mhm. If I have one marble, its density is going to be 2.87 g per cubic centimeter. If I have two marbles, the density will be the same because I'll double the mass and I'll also double the volume. So when I divide them I'll get the same number. Okay, that's what makes it an intensive property. No matter how many marbles I have, they'll have the same density. Mass though is not an intensive property. So if I have six marbles and I want to know what the massive six marbles is. Well, I know the mass of each marble is 18.5 g. So the mass of six marbles Is going to be 100 11 g. Because mass is an extensive property. It depends on how much you have. If I change the number of marbles, I'm going to change the mass. That's an extensive property. All right. So we've calculated the density. We've calculated the mass and then what happens to the density of one marble compared to six marbles as we mentioned before. Since densities and intensive property, the densities will be the same, no matter how may.
Explanation:
PLZ HELP MEEE
A tire company wants to determine what kind of rubber will last the longest for their tires. What are some variables that the researchers will want to make controlled variables?
In an experiment, we can define 3 types of variables.
Independent variables: Are these ones that the scientist can control and modify, in this case, would be the kind of rubber for the tires.
Dependent variables: Are the variables that react to the changes in the independent variables. In this case, would be "how much lasts each type of rubber".
Controlled variables: Are all of these variables that also have an impact on the dependent variable, so we need to control them (fix them) so they do not affect the study of the independent variable.
So, for this particular experiment, to find controlled variables we need to think on what things do affect the durability of tires.
Some examples can be:
The material of the ground where the tires are being tested.The temperature of the ground where the tires are being tested.The type of car where the tires are being tested.The speed at which the tires are being tested.The internal pressure at which the tires are being tested.If you want to learn more, you can read:
https://brainly.com/question/17687509
Revision has a atoMic number of 37 and a mass number of 85. HIW many protons, neutrons and electrons does an ion of rubidium with a 1+ charge have
Answer: 37 protons, 48 neutrons, and 36 electrons.
Explanation: I assume "Revision" is Rubidium. It is atomic number 37, so it has 37 protons. It's atomic mass is 85, so it has an average of (85-37) = 48 neutrons. It has a charge of +1, so one electron of the original 37 has left.
