I think the number 2, not sure
PLEASE HELP!!!!
1. Suppose a planet orbits a star at the same distance
as Earth (1 AU) but with a period of roughly 200
Earth days. The mass of the central star is:
a. less than the mass of our sun.
b. the same as the mass of our sun.
c.greater than the mass of our sun.
d. impossible to determine without
knowing the mass of the planet.
Since the period of the supposed planet is less than the period of the earth orbiting the sun, That means the mass of the central star is greater than the mass of the sun. The answer is option C
According to Kepler's third law of planetary motion for planets and satellites, he described circular orbit about the same center body stating that:
The squared of the period is directly proportional to the cube of the radius. That is,
[tex]T^{2} \alpha r^{3}[/tex]
The orbital period formula is expressed as :
[tex]T^{2}[/tex] = 4[tex]\pi ^{2}[/tex] [tex]r^{3}[/tex] ÷ GM
Suppose a planet orbits a star at the same distance as Earth (1 AU) but with a period of roughly 200 Earth days. The mass of the central star will be greater than the mass of our sun based on the formula given above.
In a geostationary orbit, whatever the mass of the satellite may be, they will travel at the same speed in a particular orbit. mass M in the above formula becomes the mass of the sun or the center mass.
Since the period of the supposed planet is less than the period of the earth orbiting the sun, That means the mass of the central star is greater than the mass of the sun.
Therefore, the correct answer is option C
Learn more here: https://brainly.com/question/19680441
©
Question 4 of 5
Which pair of objects would repel each other?
O A. A positively charged particle and a neutral particle
OB. A negatively charged particle and a neutral particle
O C. Two positively charged particles
OD. A positively charged particle and a negatively charged particle
Answer:
Two positively charged particles
Explanation:
I said two positively charged particles because if I say c or d what ever it is for you guy it can be wrong so just pick the one that says Two positively charged particles
Answer: C Two positively charged particles.
Explanation:
just trust me on it, i've done the same quiz.
A 9.0V battery is connected across a 2.2kilo ohms and 6.8kilo omhs resistors connected in series. what is the potential differences across 2.2kilo ohms resistor.
Answer:
[tex]V_{2.2} =2.2V[/tex]
Fast and loose: that's a classic voltage divider. the drop from the i-th resistor is [tex]R_i \over {\sum R}[/tex] of the drop across the whole series. In our situation, it's [tex]2.2\cdot 10^3 \over {2.2\cdot10^3 + 6.8\cdot 10^3[/tex] of 9 V. By plugging numbers in a calculator, it's 22/90 of 9V, or 2.2V
With Ohm's Law
The series is equivalent of a single resistor of Resistance [tex]2.2\cdot 10^3+6.8\cdot 10^3 \Omega = 9.0 k\Omega[/tex]. By Ohm's first Law ([tex]V=Ri[/tex]) the current flowing through the resistor is [tex]9V = 9*10^3\Omega i \rightarrow i=1mA[/tex]. At this point, the drop across the first resistor is, again by Ohm's law[tex]V = 2.2 \cdot 10^3 \Omega \cdot 1\cdot 10^{-3} A = 2.2V[/tex]
Which layer is the igneous rock type?
options:
A
B
C
D
an amusement park ride has two identical carriages that revolve around the center of the ride’s axle, as shown in the figure. both carts travel at a constant tangential speed at all points along the circular path. at what position is the total mechanical energy of the cart-cart-earth system at its maximum value?
The principle of conservation of energy allows to find the result for the mechanical energy of the system is:
Mechanical energy is conserved at all points, therefore at all points it has the same value.
Mechanical energy is defined by the sum of the kinetic energy and the potential energies.
Em = K + U
In the principle of energy conservation, it establishes that energy cannot be created or destroyed, it is only transformed, in the case of no friction, mechanized energy is conserved at all points.
They indicate that the system is rotating, which is why it is subjected to a force that expends its energy in changing the direction of the speed to keep the system in rotation, so the speed of the system remains constant.
Em = K = ½ I w²
Consequently, using the principle of conservation of energy we can find the result for the mechanical energy of the system is:
Mechanical energy is conserved at all points, therefore at all points it has the same value.
Learn more here: brainly.com/question/1517221
Select the correct answer.
Planet A Planet B
Distance from Sun 0.72 AU 9.54 AU
Planet composition rocky mantle, iron core hydrogen, helium
Gases in atmosphere very dense atmosphere that is 96.5% poisonous carbon dioxide and 3.5% nitrogen mostly hydrogen and helium
Number of moons 0 62
Rings no rings visible rings
Which planet is planet A?
A.
Mars
B.
Saturn
C.
Uranus
D.
Venus
Answer:
D, Venus
Explanation:
Using the facts
A person travels from C to D. One third of the time travels at v1 = 42km/h, the rest of the time travels at v2 = 36km/h. Find his average speed as he travels from C to D.
Answer:39km/h
Explanation:we know V=(u+v)/2. Here is u=42 and v=36
A roller is pushed with a force of 100 N along its handle, which is at an angle of 60 degrees with the horizontal. Find the work done in moving it through 20 m?
Answer:
1 kJ
Explanation:
By definition of work, [tex]W = \vec F \cdot \vec x = |\vec F| |\vec x| cos\angle Fx[/tex]. Let's replace the values: [tex]W = 100N\cdot 20m \cdot cos 60 = 1000 J[/tex]
You need low pressure to walk on
snow and ice. True or faulse
Answer:
True
Explanation:
Answer: false please give brainliest
Explanation: Reducing air pressure will not give you more traction and your tires could become seriously underinflated, affecting steering.
How are particles in liquids, solids, and gases the same? How are they different?
Answer:
Gases, liquids and solids are all made up of atoms, molecules, and/or ions, but the behaviors of these particles differ in the three phases. ... gas are well separated with no regular arrangement. liquid are close together with no regular arrangement. solid are tightly packed, usually in a regular pattern.
Explanation:
#CARRYONLEARNING
An object on Earth weighs 600 N and on Mars 100 N. If its mass on Earth is approximately 60 kg what is the mass of the object on Mars?
Answer:
I think its
10 kg
plzz plzz plzz. mark as brainliest
If the mass of an object is approximately 60 kg on earth then its mass remains the same on Mars which is 60 kg because mass does not change from place to place.
What is mass?Mass in physics is a numerical representation of inertia, a fundamental property of all matter. What a body of matter is fundamentally is the resistance it offers to a change in its speed or location brought on by the application of a force. The more mass a body has, the less of a change a force exerts results. The kilogram is the unit of mass in the International System of Units, and it is defined by Planck's constant as being equal to 6.62607015 × 10⁻³⁴ joules second (SI).
According to the question, the weight of an object depends on gravity which is different from place to place so weight also varies from place to place but the mass is constant everywhere it does not change. So, if the mass of an object is 60 kg on earth then it remains the same on mars also.
To get more information about Mass :
https://brainly.com/question/19694949
#SPJ5
most of the waves in the electromagnetic spectrum are
Answer:
The entire electromagnetic spectrum, from the lowest to the highest frequency (longest to shortest wavelength), includes all radio waves (e.g., commercial radio and television, microwaves, radar), infrared radiation, visible light, ultraviolet radiation, X-rays, and gamma rays.
Determine the force required to move a block if the coefficient of static friction of one block and the floor is 0.35 and the coefficient of the static friction between 2 boxes is 0.25
Answer:
32.5
Explanation:
Choose the normal force acting between the object and the ground. Let's assume a normal force of 250 N .
Determine the friction coefficient. ...
Multiply these values by each other: (250 N) * 0.13 = 32.5 N .
You just found the force of friction!
Which statement identifies the chemical property of iron that results in the formation of rust?
A. It is nonflammable.
B. It reacts with oxygen to form a new substance.
C. It has a very high melting point.
D. It conducts electricity.
Answer:
B, It reacts with oxygen to form a new substance
Explanation:
B
A Rocket took 5 minutes to travel the 185 km. How fast did the Rocket travel in kilometers per minute (km/min)?
Answer:
The rocket travelled 37km per minute
Explanation:
185÷5=37
Please help me thank you
Fr+Cl=FeCl3
What is the Scientific name for Ectoparasites?
Ectoparasites are a taxonomically diverse group of organisms that infest the skin of human beings and other animals. Ectoparasitic arthropods and nematodes are similar in that an individual organism can produce skin lesions that are large enough to see with the unaided eye. Ectoparasitic infestations are often intensely itchy, causing considerable annoyance and discomfort. These conditions are often focally hyperendemic in impoverished communities, with a particularly high prevalence in vulnerable families, households, and neighborhoods.
Pediculosis (infestation by head and body lice) and scabies are found to some degree in all human populations, but myiasis (fly larva infestation), tungiasis (sand flea disease), and cutaneous larva migrans occur mainly in tropical and subtropical environments. Except for body lice, the organisms discussed in this article are not vectors of pathogenic microorganisms. In other words, most ectoparasites do not carry disease-causing agents; they are, instead, the direct cause of disease. Mortality is low, but the cumulative morbidity from the direct discomfort, secondary bacterial infections, and sequelae of those infestations and infections is considerable.
Despite the abundant presence of ectoparasitic infestations across human populations, biomedical science lacks firm evidence-based practices to reliably control these organisms. In addition, head lice and scabies are developing resistance to some chemical compounds employed to treat infested individuals, prevent spread, and control outbreaks.
Please mark me brainliest.
What distance does a police car travel if it is going 3.0 m/s for 20 seconds
Answer:
60 meters
Explanation:
If you are going 3 meters in a second, and you are traveling for 20 seconds, you have to multiply
3meters/second*20seconds
cross out the seconds and you have
3 meters*20
60 meters
Who is most likely to be offered a higher auto loan rate based on their credit-
to-debt ratio?
A. Juan has $10,000 in credit and owes $6,000.
B. Chester has $5,000 in credit and owes $750
C. Jalissa has $5000 in credit and owes $500.
credjtar
D. Nancy has $10,000 in credit and owes $2,000.
SUBMIT
HELP ME PLEASE
Answer:
A - Juan
Explanation:
I took the test!
Please help...
Describe energy transformations in your own words.
Consider the following arrangement with a frictionless/massless pulley. Determine the force F required to move block A if the coefficient of static friction between block A and the floor is 0.35 and the coefficient of static friction between block A and block B is 0.25
Answer: The free - body diagrams for blocks A and B. frictionless surface by a constant horizontal force F = 100 N. Find the tension in the cord between the 5 kg and 10 kg blocks. The string that attaches it to the block of mass M2 passes over a frictionless pulley of negligible mass. The coefficient of kinetic friction Hk between M.
Explanation: Hope this helped :)
You place a small sphere with a net charge of 5 space x space 10 to the power of negative 6 end exponent space C at one corner of a square that measures 5 m on each side. What is the magnitude of the electric field at the opposite corner of the square?
900 N/C
9,000 N/C
450 N/C
4,500 N/C
Watch the video and make a ninja star. Once you have made a ninja star, 5 Point Ninja Star. Explain the energy transfer in the ninja star once it has been assembled.
PLEASE HELP
Answer:
kinetic energy because it is movement
Explanation:
The position-time graph for two drivers (A and B) are shown in the figure below. Which of the following statements is correct?
a. The two drivers are for sure moving in parallel directions
b. Driver B is moving faster than driver A.
c. Driver A is moving faster than driver B.
d. The two drivers are moving at the same speed
Answer:
A
Explanation:
