Help please due today

Answer:

Aqueous layer (1 M HCI)

Explanation:

First of us I want to remind you of the cliché in chemistry that like dissolves like. In solvent extraction, a mixture is dissolved in a system consisting of two immiscible solvents. One layer is organic while the other layer is aqueous.

Polar substances partition in the aqueous layer while nonpolar substances partition in the organic layer.

Since Copper sulfate is ionic, we will find it in the aqueous layer according to the old chemistry cliche.

Answer:

When the water vapor is cooled by the ice, the water molecules slow down more than in the cup without the ice. This allows their attractions to bring more molecules together to become liquid water.

Answer:

6.75 moles of Ba(NO₃)₂.

Explanation:

The balanced equation for the reaction is given below:

3BaCl₂ + 2Al(NO₃)₃ —> 3Ba(NO₃)₂ + 2AlCl₃

From the balanced equation above,

2 moles of Al(NO₃)₃ reacted to produce 3 moles of Ba(NO₃)₂

Finally, we shall determine the number of mole of Ba(NO₃)₂ produced by the reaction of 4.25 moles of Al(NO₃)₃. This can be obtained as illustrated below:

From the balanced equation above,

2 moles of Al(NO₃)₃ reacted to produce 3 moles of Ba(NO₃)₂.

Therefore, 4.25 moles of Al(NO₃)₃ will react to produce = (4.50 × 3)/2 = 6.75 moles of Ba(NO₃)₂.

Thus, 6.75 moles of Ba(NO₃)₂ were obtained from the reaction.

Answer:

[tex]V_{O2}= 1.5m^3[/tex]

Explanation:

From the question we are told that:

Volume of H_2O consumed [tex]V_{H2O}=3.0cm^3[/tex]

Balanced equation of Reaction is

[tex]2 F_2 + 2 H_2O -> 4 HF + O_2[/tex]

Therefore

O_2 produced in Volume is

 [tex]V_{O2}= \frac{1}{2}*V_{H2O}[/tex]

 [tex]V_{O2}= \frac{1}{2}*3.0m^3[/tex]

 [tex]V_{O2}= 1.5m^3[/tex]

Answer:

The water soluble substance which absorb moisture from the air and then dissolve on the absorbed moisture to change into liquid taste are called deliquescent substances whereas the substances which absorb moisture from air but do not change their state are called hygroscopic substances.

Answer:

Hygroscopic substances absorb moisture from the air but do not dissolve in it, whereas substance that undergo deliquescence dissolves in the water vapour that is absorbed from the air, forming a liquid solution

Answer:

60 mols hydrogen

Explanation:

1 mol of glucose contains 12 mols of Hydrogen

5 mols of glucose contains 12 * 5 = 60 moles of hydrogen.

Place the gelatin powder in a chilled container and pour lukewarm water over it

Answer:

2

Explanation:

I think because the hot water would enable it to dissolve much faster as compared to cold water.its like when adding sugar to a cup of tea it would dissolve much faster in hot tea rather than cold tea

Answer:

0.080 J/g °C

General Formulas and Concepts:

Thermodynamics

Specific Heat Formula: q = mcΔT

Explanation:

Step 1: Define

[Given] q = 373 J

[Given] m = 312 g

[Given] ΔT = 15 °C

[Solve] c

Step 2: Find Specific Heat

Step 3: Check

Follow sig fig rules and round. We are given 2 sig figs as our lowest.

0.079701 J/g °C ≈ 0.080 J/g °C

Topic: AP Chemistry

Unit: Thermodynamics

Answer:

Solution given:

1:

1 mole of aluminum =26.98 gram

8 mole =26.98*8=215.84 gram

8.00 moles of aluminum =215.84grams.

2:

1 mole of aluminum chloride =133.34 grams

10.5 moles of aluminum chloride =133.34*10.5=1400.07 grams

10.5 moles of aluminum chloride =1400 grams.

#1

1mol.of Al=27g

8mol of Al=27(8)=216g

#2

Molar mass of AlCl3=133.5g/mol

1 mol of AlCl3=133.5g

10.5mol.of AlCl3=10.5(133.5)=1401.75g

Answer:

carbohydrate, 6, a carbonyl, disaccharide

Explanation:

Fructose is an example of a ketohexose. The -hexose part of the name indicates that fructose is a carbohydrate that contains 6 carbons. There are more isomers that are ketohexoses.

The keto- part of the name indicates that fructose contains a carbonyl functional group. In ketones, the carbonyl is in an inner carbon.

Fructose can combine with glucose to form sucrose. Therefore, sucrose is a disaccharide. Disaccharides are formed by the bonding of 2 monosaccharides.

Answer:

See explanation

Explanation:

a) The balanced reaction equation is;

K2S + CO(NO3)2 ------> COS + 2 KNO3

b) When we include the states of matter, we have;

K2S(aq) + CO(NO3)2(aq) ----> COS(s) + 2 KNO3(aq)

c) The complete ionic equation is;

2K^+(aq) + S^2-(aq) + Co^2+(aq) + 2NO3^-(aq) ----> CoS(s) + 2K^+(aq) + 2NO3^-(aq)

Net ionic equation;

Co^2+(aq) + S^2-(aq) ----> CoS(s)

Answer:

the energy released is to make steam to create electricity. yes you are right i just didnt feel like being super technical

In a nuclear reaction, the  direct function of the energy released from the nuclear chain reaction in a nuclear power plant is turning the blades of the turbine heating water to produce steam .

There are two types of nuclear reactions which are nuclear fusion and nuclear fission .They involve the combination and disintegration of the element's nucleus respectively.

In nuclear fission, the nucleus of the atom is bombarded with electrons of low energy which splits the nucleus in to two parts .Large amount of energy is released in the process.It is used in nuclear power reactors as it produces large amount of energy.

In nuclear fusion,on the other hand, is a reaction which occurs when two or more atoms combine to form a heavy nucleus.Large amount of energy is released in the process which is greater than that of the energy which is released in nuclear fission process.

Learn more about nuclear reactions,here:

https://brainly.com/question/12786977

#SPJ7

Answer:

0.50 g Caffeine

Explanation:

Step 1: Given data

Concentration of caffeine by weight in tea leaves: 5.0%

Mass of tea leaves: 10. g

Step 2: Calculate the maximum weight of caffeine that can be isolated

The concentration of caffeine by weight in tea leaves is 5.0%, that is, there are 5.0 g of caffeine per 100 g of tea leaves. The maximum weight of caffeine in 10. g of tea leaves is:

10. g Tea leaves × 5.0 g Caffeine/100 g Tea leaves = 0.50 g Caffeine

Answer:

Partial Pressure = 0.630atm

Explanation:

The total pressure of a mixture of gases is equal to the partial pressure of those gases. The partial pressure of a gas is defined as:

Partial pressure = Mole Fraction * Total pressure

The mole fraction of a gas is the ratio between the moles of the gas and the total moles.

To solve this question we need to find the mole fraction of nitrogen to find its partial pressure:

Mole Fraction nitrogen:

7.00 moles Nitrogen / (7.00moles N2 + 2.50moles O2 + 0.500moles He) = 0.700 = Mole fraction.

Partial Pressure = 0.700* 0.900atm

Answer:

The options are

A) Glycosaminoglycans

B) Gangliosides

C) Peptidoglycans

D) Proteoglycans

E) Selectins

The answer is A) Glycosaminoglycans

Glycosaminoglycans are polysaccharides which comprises of repetitive disaccharides. They are negatively charged as a result of the strong anions present. They are present in some cells of the body and they help in transmission of signals between cells etc.

They also comprise of carboxylate and sulfate groups in its structure.

Answer: A gradual increase in the overall temperature of the earth's atmosphere generally attributed to the greenhouse effect caused by increased levels of carbon dioxide, chlorofluorocarbons, and other pollutants.

Explanation:

Answer:

welcome to mobile legends

Explanation:

ml ka muna maya kana mag module

Answer:

A and b are the both the answers

Answer:

1569 torr

Explanation:

Assuming ideal behaviour and constant temperature, we can solve this problem by using Boyle's law, which states:

Where in this case:

We input the data given by the problem:

And solve for P₂:

Answer:

aluminum forms a complex ion with excess hydroxide

Explanation:

Complex formation accounts for the dissolution of certain compounds. For instance,reaction of aluminum and sodium hydroxide yields insoluble aluminum hydroxide as follows;

Al(s) + 3NaOH(aq) -----> Al(OH)3(s) +Na(s)

However, in excess NaOH, the solid aluminum hydroxide dissolves as due to the formation of a complex Al(OH)4^- in the solution.

Answer:

B. Gravity

Explanation:

Gravity is a force, not a gas :)

Answer:

B: Gravity

Explanation:

gravity pulls on the gad

Answer:

0.418 g of CO₂ will be produced

Explanation:

Equation of the reaction is given below:

CaCO₃ (s) + 2HCl (aq) ----> CaCl₂(aq) + CO₂ (g) + H₂O (l)

From the equation of reaction , 1 mole of CaCO₃ reacts with 2 molemolesmof HCl to produce 1 mole of CO₂

Number of moles of HCl in 25.7 ml of a 0.738 M solution of HCl is obtained using the formula below:

Number of moles = molarity × volume (Litres)

Number of moles of HCl = 0.738 M × 25.7 mL × 1 L/1000 mL = 0.0190 moles

Since the antacid, Tums will be excess, the limiting reactant is HCl

2 moles of HCl produces 1 mole of CO₂

0.0190 moles of HCl will produce 0.0190 moles ÷ 2 = 0.0095 molesof CO₂

Mass of 0.0095 moles of CO₂ = Numbe of moles × molar mass of CO₂

Molar mass of CO₂ = 44.0 g/mol

Mass of CO₂ produced = 0.00950 moles × 44.0 g/mol = 0.418 g of CO₂

Therefore, 0.418 g of CO₂ will be produced if Tums is added to 25.7 mL of a 0.738 M HCl solution

Answer:

C₂H₃O₂

Explanation:

To determine the empirical formula of succinic acid, we need to follow a series of steps.

Step 1: Divide each mass percent by the atomic mass of the element

C: 40.68/12.01 = 3.39

H: 5.12/1.01 = 5.07

O: 54.19/16.00 = 3.39

Step 2: Divide all the numbers by the smallest one, i.e. 3.39

C: 3.39/3.39 = 1

H: 5.07/3.39 ≈ 1.5

O: 3.39/3.39 = 1

Step 3: Multiply all the numbers by a factor that makes them all integers, i.e.  2

C: 1 × 2 = 2

H: 1.5 × 2 = 3

O: 1 × 2 = 2

The empirical formula of succinic acid is C₂H₃O₂.

Answer:

C8H17N

Explanation:

Number of moles of c

13.90 × 10^-3/44 g/mol × 1 = 0.000316 moles

Mass of C= 0.000316 moles × 12 = 0.00379 g

Number of moles of H

6.048 × 10^-3/18 × 2 = 0.000672 moles

Mass of H

0.000672 moles × 1 = 0.000672 g

Mass of N

0.005024 - [0.00379 g + 0.000672 g]

= 0.000562 g

Number of moles of N

0.000562 g/14 = 0.00004 moles

Divide through by the lowest ratio;

C= 0.000316/0.00004, H= 0.000672 /0.00004, N= 0.00004/0.00004

C= 8, H = 17, N = 1

Hence the empirical formula is;

C8H17N

Answer:

a. F

b. O

c. N

d. Be

Explanation:

Electronegative is a periodic table for the elements which is stated by the Pauling number. EN helps us to state the type of bond which it can be covalent or ionic.

Fluroine is the most electronegative number of the periodic table.

In option A, F (4) is more EN than Cl (3.2)

EN is decreased from right to left in the periodic table (if we see periods) and increases, from bottom to top if we look at the groups

In option B, O (3.4) is more EN than P (2.2)

In option C, N (3) is more EN than C (2.6)

In Option D, Be (1.5) is more EN than Li (1)

Explanation:

The given set of options are:

a) difluoroacetic acid: _______ fluoroacetic acid: _______ trifluoroacetic acid: _______

b) 2-chlorobutanoic acid: _______ 4-chlorobutanoic acid: _______ 3-chlorobutanoic acid: _______

c)cyclohexanol: _______ phenol: _______ benzoic acid:

A strong acid is one whose conjugate base is stabilized either by resonance or -I effect.

a) If -I groups are present on the carboxylic acid group then they stabilize the carboxylate anion (the conjugate base of the carboxylic acid) and give more strength to the carboxylic acid group. More the number of -I groups then more will be the strength of the carboxylic acid.

Among the given options,

Trifluoroacetic acid has three fluorine atoms in its structure thus it is a strong acid.

Fluoroacetic acid has only one fluorine atom in its structure. Hence it is the weak acid among the given options.

b) The -I groups should be nearer to the carboxylic acid group then it attains more stability.

If the distance of the -I group increases from the -COOH group then, the strength of the carboxylic acid group decreases.

So, the strongest acid is 2-chlorobutanoic acid.

The weak acid among them is 4-chlorobutanoic acid.

c) Among the given options benzoic acid is the strongest acid because due to resonance benzoate anion is stabilized more.

Here resonance exists in both phenyl group and [tex]-COO^-[/tex] group.

The weak acid is cyclohexanol.

Because cyclohexanolate anion is not stabilized by resonance.

Answer:

water

Explanation:

because its molecular formula is H2O which clarify that, their is the two hydrogen element used in water meanwhile,

mixture of hydrogen and oxygen contain just one hydrogen element and only one oxygen element.

Answer:

.032 M .

Explanation:

Molecular weight of ammonium nitrate is 80  .

3.2 g = 3.2 / 80 moles

= .04 moles

volume = 100 mL = 0.1 L

Molarity of 100 mL solution = .04 moles / 0.1 L

= 0.4 M solution.

Now 2 mL solution of 0.4 M is diluted to a volume of 25 mL .

Using the formula S₁ V₁ = S₂V₂

0.4 M x 2 mL = S₂ x 25 mL

S₂ = .4 x 2 / 25

= .032 M

Hence required concentration is .032 M .

Answer:

Lewis base/electron pair donors

Explanation:

Ligands are ions or neutral molecules which bond together with a central ion. They act as election pair donors, also known as Lewis bases, while the central ion they are connected to acts as the acceptor.

Therefore, a ligand is a molecule or ion that acts as a Lewis base/electron pair donors

Answer:

Because sucrose is a complex disaccharide, it is not classified as either an aldose or a ketone. Instead, it is a compound that contains both. glucose is aldose sugar and fructose is a ketose sugar.