Answer:01
When you describe nature, and you need standard, useful units for everything you will see that these units are linked. So you start with defining base units that are simple:
kg, meter, second, Kelvin, …
Now other units will be automatically derived:
speed = distancetime , so the unit is ms
acceleration = speedincreasetime , so the unit is ms2
Force = Mass x acceleration, so the unit is kg.ms2
Pressure is Force/surface, so the unit is kgm.s2
You can define new simple units for this, but they are still derived from the base units:
Force: 1N=1kg.ms2
Pressure: 1Pa=1kgm.s2
2 Answer
In mechanics, work is defined as “force x distance”. Since energy can be measured as work, we can write energy = force x distance. Thus SI derived unit of energy has the units of newtons x meter or kg m2/s
What are characteristics of all protests?
Answer:
Explanation:
Una manifestación, protesta o marcha es la exhibición pública de la opinión de un grupo activista (económica, política o social), mediante una congregación en las calles, a menudo en un lugar o una fecha simbólicos y asociados con esa opinión.
Help ASAP Iill mark you as brainlister
C. Yes, if each sample contains 6.02 x 10²³ atoms.
What is the percent yield of either if 1.11L(d=0.7134 g/mL) is isolated from the reaction of 1.500L of C2H5OH
Answer:
Percent yield of ether = 83.18%
Explanation:
Equation of the synthesis reaction of ether from ethanol is given as follows :
2 C₂H₅OH -----> C₂H₅OC₂H₅ + H₂0
Density = mass / volume
Therefore mass = density × volume
Density of ether = 0.7134 g/mL; volume of ether produced = 1.11 L = 1110 mL; Molar mass of ether = 74 g/mol
Mass of ether produced = 0.7134 g/mL × 1110 mL = 791.874 g
Density of ethanol = 0.789 g/mL; volume of ethanol = 1.50 L = 1500 mL; molar mass of ethanol = 46 g/mol
Mass of ethanol reacted = 0.789 g/mL × 1500 mL = 1183.5 g
From the equation of reaction, 2 mole of ethanol produces 1 mole of ether
Mass of 2 moles of ethanol = 2 × 46 = 92 g
Therefore, 92 g of ethanol produces 74 g of ether
1183.5 g of ethanol will produce 1183.5 × 74/92 grams of ether = 951.945 g of ether
Percent yield of ether = actual yield/theoretical yield × 100%
Actual yield of ether = 791.874 g; theoretical yield of ether = 951.945 g
Percent yield of ether = (791.874 g × 951.945 g) × 100 %
Percent yield of ether = 83.18%
Which of the following numbers is equal to the value snow
notation below?
4.8 x 10^-4
A. 0.0048
ОО
B. 0.00048
C. 0.048
D. 0.000048
Answer:
B
Explanation:
4.8×10^-4
10^-4 = 0.0001
4.8×0.0001 = 0.00048
8. Acetylene is the common name for (a) ethene (b) ethyne (c) propene (d) propyne
Answer:
ethene
Explanation:
The chemical compound acetylene (systematic name: ethyne) has the formula C2H2. It's a hydrocarbon and the most basic alkyne. Because its two carbon atoms are linked together in a triple bond, acetylene is unsaturated as an alkyne.And the ending of acetylene has ene which indicates that it's an alkene .And the ending of acetylene has ene which indicates that it's an alkene.
Answer: i think it is Ethyne
Explanation: because another name for Acetylene is Ethyne which is commonly known
Which of the following is a base? (3 points)
AgO
Ca(OH)2
HF
NaCl
Answer:
Ca(OH)2 is base
is answer of this question
hope this will help you more
Answer:
Ca(OH)2
Explanation:
Got it right on the test
A UV wave has a smaller___
than visible light.
Answer:
wavelength
Explanation:
Si un carabinero está controlando velocidad en la carretera y pistolea mi vehículo, está midiendo mi rapidez media
Answer:
Si.
Explicación:
Si un oficial de policía está controlando la velocidad en la carretera y dispara al vehículo con una pistola de radar. El policía mide la velocidad media del coche con esta pistola de radar. Una pistola de radar es un dispositivo que se utiliza para medir la velocidad de los objetos en movimiento que fue inventado por Bryce K. Brown en el año de 1954. La pistola de radar se utiliza con fines policiales para calcular la velocidad de los vehículos en movimiento.
i need to know soon. HELP
PLEASE
Answer:
D..
carbonate and sulphate
Will Mark Brainlest ( all the disaster are hazard but all the hazard are not disaster) give reason
Answer:
Explanation to the following question is as follows;
Explanation:
Any phenomenon that would have the potential to cause severe death or property damage is considered a danger. When the potential for devastation is realised, a hazard becomes a disaster. All catastrophes are risks, but not all risks are catastrophes. Hazards do not always result in devastation.
Answer:
I hope this will help you.
If you were given a mixture that contains rice and sand, can you separate them using filtration method? Why?
Answer:
Yes
Explanation:
A rice and sand combination can be separated using the filtering process.
First, we'll employ filtration, which involves filtering rice grains with sand.
RICE Particles that are heavy and large will stay in place, while light and tiny sand particles will fill in the gaps.
Below are descriptions of different center voids of a solid fuel. Which design
shape will generate the most thrust?
A. A heart
OB. A circle
C. A triangle
O D. A tree with branches
B. A circle.
The center void shape that generates the most thrust in a solid fuel rocket is a circle.
What is Fuel?
Fuel is a substance that is used to produce heat or energy through combustion or other chemical reactions. It can be in the form of a solid, liquid, or gas and is typically used to power engines, generators, or heating systems. Examples of fuels include gasoline, diesel, natural gas, coal, wood, and propane. The choice of fuel depends on factors such as availability, cost, energy content, and environmental impact.
This is because a circular shape allows for the most efficient burning of the fuel, with the flame front moving evenly in all directions. Other shapes, such as a heart, triangle, or tree with branches, can cause uneven burning and may result in less thrust.
Learn more about Fuel from the given link
https://brainly.com/question/10172005
#SPJ1
Answer:
Explanation:
D.
tree with branches
The weight of an object _____.
a) is always the same
b) depends on its location
c) is not affected by gravity
d) is the same as its mass
Answer:
c
Explanation:
and that's bc it will not share stay the same
Which is a possible consequence of decreasing air quality resulting from global warming? drying out of fertile lands flooding of low-lying coastal areas melting of glaciers and polar ice caps decrease in population due to health threats The correct answer is decrease in population due to health threats.
Answer: A decrease in population due to health threats is a possible consequence of decreasing air quality resulting from global warming.
Explanation:
When average temperature of Earth keeps on increasing for a longer period of time due to greenhouse gases, increased level of carbon dioxide and other gases etc then it is called global warming.
As humans use oxygen to sustain which is present in the air. So, when there will occur decrease in air quality that results from global warming then it means more illness or diseases will be there.
Hence, people will tend to die more often because of decrease in the air quality their health is getting affected.
Thus, we can conclude that a decrease in population due to health threats is a possible consequence of decreasing air quality resulting from global warming.
Answer:
A decrease in population due to health threats is a possible consequence of decreasing air quality resulting from global warming.
Explanation:
Hope this helps.
 Help ASAP only right answers only no spam don’t answer if you don’t know
Explain Garri industry
Answer:
In West Africa, garri refers to the creamy granular flour obtained by processing the starchy tuberous roots of freshly harvested cassava. ... Flour foodstuffs mixed with cold or boiled water are a major part of the diet amongst the various ethnicities of Nigeria, Benin Republic, Togo, Ghana, Guinea, Cameroon and Liberia.
Explanation:
What is the most important criteria for using chromatography to separate components from a mixture
Answer:
this is your answer i hope it will help you if this answer is right then folow meChromatography can be quantitatively found by the retention factor. Therefore, the important criterion to use chromatography for separating components of a mixture is the difference in solubility of the liquids.
Cuando aumenta la temperatura dentro de un recipiente cerrado que contiene un gas este se expande/comprime por que las partículas la forman se alejan/acercan
Tachar lo que no corresponda
Answer:
expande
forman se alejan
Explanation:
Según las leyes de los gases ideales;
La ley de Charles establece que el volumen de una masa dada de gas ideal es directamente proporcional a su temperatura a la presión simultánea.
Esto significa que cuando se calienta una masa dada de gas ideal, el gas se expande y las moléculas de gas se alejan unas de otras de acuerdo con la ley de Charles.
What is octyne?
O A. An alkane
B. An alkyne
C. A polymer
D. An alkene
SUBMIT
Answer:
B. An alkyne
Explanation:
Octynes are alkynes with one triple bond
Suggest two reasons why carbon dioxide emissions from electricity production decreased from 2012 to 2015
Answer:
global warming
Explanation:
Applying smart electric grid technologies can potentially reduce CO2 emissions.
In many halocarbons, among them chloroethane (CH3CH2Cl), a halogen is attached to an aliphatic carbon chain. These halocarbons are called _____.
1.carboxylic acids
2.alkyl halides
3.aryl halides
4.phenyl halides
In the periodic table, identify the element X on its average atomic mass
Answer:
Potassium
Explanation:
To solve this question we need to find, as first, the average atomic mass of the element knowing that is defined as the sum of the masses of each isotope times their abundances. For the element X:
Average atomic mass:
38*0.0967 + 39*0.7868 + 40*0.1134 + 41*0.0031
= 39.02g/mol
The atom that has the average atomic mass closest to 39.02g/mol is Potassium, K = 39.10g/mol.
Using the diluted solution from the 100-mL volumetric flask, rinse a 1-mL vol. pipet with a few drops and then pipet exactly 1.00-mL into a 50-mL volumetric flask. (Take care not to pipet any solids.) Fill the 50-mL volumetric flask to the mark with acidic FeCl3 solution. Cap and invert to mix the solution. What color is the solution
Answer:
The color of the solution turned a clear brown sort of a copper color
Explanation:
The color of the solution turned a clear brown sort of a copper color.
This is because ASA and the FeCl3 are reacting in a manner that it is resulting in the creation of a metal.
3. According to the Arrhenius theory, which list of compounds includes only acids?
A) HF, H2CO3, and HNO3
B) LiOH, HNO3, and CH3OH
C) H2PO4, HCO3, and NH4Cl
D) HNO3, H2SO4, and C6H12O6
Answer:
C) H2PO4, HCO3, NH4Cl
Explanation:
Because all of the above compounds on reaction with water liberate H+ ion which is the identification of an acid acc to Arhenius Theory
can someone help me?
Answer:
1: because phosphate contain oxide ions so that is base character
name a food that contain an acid
Answer:
name a food that contain an acid
1. nuts
2. dairy
3. grains
3. meat
these are the foods which contains acids.
hope its helps you
have a great day keep smiling be happy stay safe.
cuantas moléculas de oxigeno se producen por la descomposición de 28.5 g de H2O2 (masa molecular = 34.0g/mol) de acuerdo a la ecuación
2H2O2(l) → 2H2O(l)+O2(g)
The question is as follows: How many oxygen molecules are produced by the decomposition of 28.5 g of H2O2 (molecular mass = 34.0g / mol) according to the equation
2H2O2 (l) → 2H2O (l) + O2 (g)
Answer: There are [tex]2.52 \times 10^{23}[/tex] molecules are produced by the decomposition of 28.5 g of [tex]H_{2}O_{2}[/tex] according to the equation [tex]2H_{2}O(l) \rightarrow 2H_{2}O(l) + O_{2}(g)[/tex].
Explanation:
Given: Mass of [tex]H_{2}O_{2}[/tex] = 28.5 g
As moles is the mass of a substance divided by its molar mass. Hence, moles of [tex]H_{2}O_{2}[/tex] is calculated as follow.
[tex]Moles = \frac{mass}{molarmass}\\= \frac{28.5 g}{34.0 g/mol}\\= 0.838 mol[/tex]
According to the given equation, 2 moles of [tex]H_{2}O_{2}[/tex] gives 1 mole of [tex]O_{2}[/tex]. So, moles of [tex]O_{2}[/tex] produced by 0.838 moles of [tex]H_{2}O_{2}[/tex] will be calculated as follows.
[tex]Moles of O_{2} = \frac{0.838 mol}{2}\\= 0.419 mol[/tex]
This means that moles of [tex]O_{2}[/tex] produced is 0.419 mol.
As per the mole concept, 1 mole of every substance has [tex]6.022 \times 10^{23}[/tex] molecules.
So, molecules of [tex]O_{2}[/tex] present in 0.419 mole are as follows.
[tex]0.419 \times 6.022 \times 10^{23}\\= 2.52 \times 10^{23}[/tex]
Thus, we can conclude that there are [tex]2.52 \times 10^{23}[/tex] molecules are produced by the decomposition of 28.5 g of [tex]H_{2}O_{2}[/tex] according to the equation [tex]2H_{2}O(l) \rightarrow 2H_{2}O(l) + O_{2}(g)[/tex].
Which redox reaction would most likely occur if silver and zinc metal were added to a solution that contained silver and zinc ions?
Answer:
D. Zn²⁺ + 2Ag → Zn + 2Ag⁺
Explanation:
On the reduction potential chart, we have that silver ion Ag⁺ is a stronger oxidizing agent than, zinc, Zn, which is a reducing reducing agent the compared to silver
Therefore, the redox reaction that will occur is that the zinc, Zn, will be oxidized to Zn²⁺ ion, while the silver, Ag²⁺ ion will be reduced to silver deposits Ag, therefore, the zinc will displace the silver in the solution containing silver and zinc ions because zinc is higher than silver in the reactivity series
The reduction potential Zn → Zn²⁺ + 2e⁻ = +0.76
The reduction potential for Ag⁺ + e⁻ → Ag = +0.8
Therefore, given that redox reactions are reversible, we get the following likely redux reaction;
Zn(s) + 2Ag⁺(aq) ⇄ 2Ag(s) + Zn²⁺(aq)
Therefore, from the given options;
Zn²⁺(aq) + 2Ag(s) → Zn(s) + 2Ag⁺(aq) is the reaction most likely to occur.
You react 25.0 grams of aluminum with iron (II) chloride. How many grams of iron will you
make? 2A1 + 3FeCl2 --> 2AlCl3 + 3Fe
(PLS HELP ASAP)
Explanation:
hope the picture above helps you to understand:)
an organic compound on analysis yielded 2.04g carbon, 0.34g hydrogen, 2.73g oxygen. calculate the empirical formula
Answer:
CH2O
Explanation:
According to this question:
C = 2.04g
H = 0.34g
O = 2.73g
First, we divide the mass value of each element by its atomic mass to convert to moles.
C = 2.04g ÷ 12 = 0.17mol
H = 0.34g ÷ 1 = 0.34mol
O = 2.73g ÷ 16 = 0.17mol
Next, we divide by the smallest mole value (0.17):
C = 0.17mol = 0.17 = 1
H = 0.34mol ÷ 0.17 = 2
O = 0.17mol ÷ 0.17 = 1
The whole number ratio of C,H,O is 1:2:1, hence, the empirical formula is CH2O.
