Answer:
Y/X = 2/3 x^2 + 16/3
Y= 2/3 x^3 + 16/3 x
Just replace y with y/X and X with x^2
Let A represent the average value of the function f(x) on the interval [0,6]. Is there a value of c for which the average value of f(x) on the interval [0,c] is greater than A?
Answer:
The average value of the Function f(x) by squeeze theorem states that no extreme or greater value will exist within the designated area for f(x)
Find the square roots of these numbers by division method.
a-6090
two triangles are similar what is x
Answer:
x = 10
Step-by-step explanation:
smaller triangle / bigger triangle = 20 / 28
hence,
3x / (4x+2) = 20/28
28(3x) = 20(4x+2)
84x = 80x + 40
4x = 40
x = 10
The angle made by the ladder with the ground is degrees, and the length of the ladder is inches.
Answer:
59.04°
58.31 inches
Step-by-step explanation:
The solution triangle is attached below :
Since we have a right angled triangle, we can apply trigonometry to obtain the angle ladder makes with the ground;
Let the angle = θ
Tanθ = opposite / Adjacent
Tanθ = 50/30
θ = tan^-1(50/30)
θ = 59.036°
θ = 59.04°
The length of ladder can be obtained using Pythagoras :
Length of ladder is the hypotenus :
Hence,
Hypotenus = √(adjacent² + opposite²)
Hypotenus = √(50² + 30²)
Hypotenus = √(2500 + 900)
Hypotenus = 58.309
Length of ladder = 58.31 inches
Answer:
59°
58.3 inches
Step-by-step explanation:
Here is the full question :
A ladder is placed 30 inches from a wall. It touches the wall at a height of 50 inches from the ground. The angle made by the ladder with the ground is degrees, and the length of the ladder is inches.
Please check the attached image for a diagram explaining this question
The angle the ladder makes with the ground is labelled x in the diagram
To find the value of x given the opposite and adjacent lengths, use tan
tan⁻¹ (opposite / adjacent)
tan⁻¹ (50 / 30)
tan⁻¹ 1.667
= 59°
the length of the ladder can be determined using Pythagoras theorem
The Pythagoras theorem : a² + b² = c²
where a = length
b = base
c = hypotenuse
√(50² + 30²)
√(2500 + 900)
√3400
= 58.3 inches
Which functions have a maximum value greater than the maximum of the function g(x) = -(x + 3)2 - 4?
Answer:
max: -4
Step-by-step explanation:
(x+3)^2 》0 mọi x
<=> -(x+3)^2 《0
<=> -(x+3)^2 -4 《 -4
one class collects 8 1/4 pounds of recyclable materials. Another class collects 1 1/2
Step-by-step explanation:
what to find then??.........
I'LL GIVE BRAINLIEST !!! FASTERR !
Answer:
Option A, 86°
Step-by-step explanation:
each diagonals of a rhombus divides the angles at half, so a+b+c+d = 360°/2 = 180°
now, a+b+c+d-94° = 180°-94° = 86°
Answer:
D 266°
Step-by-step explanation:
a+b+c+d-94°
90°+ 90°+ 90°+ 90° -94°
360°-94°
266°
Write the sum using the summation notation assuming the suggested pattern continues 2, -10, 50, -250, +…
Is this sequence arithmetic or geometric? How do you know?
Answer:
geometric
x=number of terms
∑ 2(-5)^(k-1)
k=1
Step-by-step explanation:
the sequence has a ratio of -5 (2*-5=-10, -10*-5=50)
x=number of terms
∑ 2(-5)^(k-1)
k=1
for this i don't know what the last term is since it doesn't show in the question but just find 2(-5)^x and x will be the top term
Write an equation in standard form of the line that passes through the given point and has the given slope (-8,0); m= -4 PLEASE HELP NEED DONE ASAP WILL GIVE BRAINLIEST
Answer:
4x+y=-32
Step-by-step explanation:
given,
slope (m) = -4
point: (-8,0)
as we know the slope intercept form of the line is, y=mx+b, b=y-mx, now we put x=-8, y=0 to find b [because the point is given (-8,0) so it must satisfy the equation]
so,
b = 0-(-4)×(-8) = -32
y=mx+b
or, y=-4x-32
or, 4x+y=-32
(this is the standard form of the line)
Using the equation y - y1 = m(x - x1)
y - 0 = -4(x - (-8))
y = -4(x + 8)
y = -4x - 32
what is the answer? I need help!! please and thank you
Answer:
B
Step-by-step explanation:
27%=0.27 and sqrt(2)<2.75
please help me i will give 20 points for this question
Answer:
1. a. 2
b. -½
c. y - 3 = -½(x - 8) => point-slope form
y = -½x + 7 => slope-intercept form
2. a. -1
b. 1
c. y - 5 = 1(x - 3) => point-slope form
y = x + 2 => slope-intercept form
Step-by-step explanation:
1. (8, 3) and (10, 7):
a. The gradient for the line joining the points:
Gradient = [tex] \frac{y_2 - y_1}{x_2 - x_1} [/tex]
Let,
[tex] (8, 3) = (x_1, y_1) [/tex]
[tex] (10, 7) = (x_2, y_2) [/tex]
Plug in the values
Gradient = [tex] \frac{7 - 3}{10 - 8} [/tex]
Gradient = [tex] \frac{4}{2} [/tex]
Gradient = 2
b. The gradient of the line perpendicular to this line = the negative reciprocal of 2
Negative reciprocal of 2 = -½
c. The equation of perpendicular line if it passes through the first point, (8, 3):
Equation of the perpendicular line in point-slope form can be expressed as y - b = m(x - a).
Where,
(a, b) = (8, 3)
Slope (m) = -½
Substitute (a, b) = (8, 3), and m = -½ into the point-slope equation, y - b = m(x - a).
Thus:
y - 3 = -½(x - 8) => point-slope form
We cam also express the equation of the perpendicular line in slope-intercept form by rewriting y - 3 = -½(x - 8) in the form of y = mx + b:
Thus:
y - 3 = -½(x - 8)
y - 3 = -½x + 4
y - 3 + 3 = -½x + 4 + 3
y = -½x + 7
2. (3, 5) and (4, 4):
a. The gradient for the line joining the points:
Gradient = [tex] \frac{y_2 - y_1}{x_2 - x_1} [/tex]
Let,
[tex] (3, 5) = (x_1, y_1) [/tex]
[tex] (4, 4) = (x_2, y_2) [/tex]
Plug in the values
Gradient = [tex] \frac{4 - 5}{4 - 3} [/tex]
Gradient = [tex] \frac{-1}{1} [/tex]
Gradient = -1
b. The gradient of the line perpendicular to this line = the negative reciprocal of -1
Negative reciprocal of -1 = 1
c. The equation of perpendicular line if it passes through the first point, (3, 5):
Equation of the perpendicular line in point-slope form can be expressed as y - b = m(x - a).
Where,
(a, b) = (3, 5)
Slope (m) = 1
Substitute (a, b) = (3, 5), and m = 1 into the point-slope equation, y - b = m(x - a).
Thus:
y - 5 = 1(x - 3) => point-slope form
We can also express the equation of the perpendicular line in slope-intercept form by rewriting y - 5 = 1(x - 3) in the form of y = mx + b:
Thus:
y - 5 = 1(x - 3)
y - 5 = x - 3
y - 5 + 5 = x - 3 + 5
y = x + 2
5. Which pair of equations represents parallel lines?
A. y =2x+7
Y=2x-7
B. Y=7
X=7
C. Y=2x-7
Y=-1/2-7
D. Y=2x+7
Y=x+7
Answer:
C
Step-by-step explanation:
help me please brainliest for the best answer!!
Answer:
The volume of the irregular figure would be 102 [tex]cm^3[/tex].
Step-by-step explanation:
If you wish to make the process of calculating the volume easier, you can picture the irregular figure as two rectangular prisms: the large one on the bottom, and the smaller one appearing to protrude from the prism below it. Using this method, you only need to find the volumes of the two rectangular prisms and add the values together to get the volume for the irregular figure. The formula used to find the volume of a rectangular prism is [tex]l*w*h[/tex], where [tex]l[/tex], [tex]w[/tex], and [tex]h[/tex], represents the length, width, and height of the rectangular prism respectively. Using the formula above, the volume of the larger rectangular prism would be [tex]6*3*5=30*3=90 cm^3[/tex], and the volume of the smaller rectangular prism would be [tex]3*2*2=6*2=12 cm^3[/tex]. So the volume of the entire irregular figure would be [tex]90+12=102 cm^3[/tex].
Answer:
102
Step-by-step explanation:
Large rectangle:
6 × 3 × 5 = 18 × 5 = 90
Small rectangle:
7 - 5 = 2
3 × 2 × 2 = 6 × 2 = 12
90 + 12 = 102
Hope this helped.
help! please!!!!!! look at photo :))
Hey there!
We know that Danielle earns $10 per hour, so muliply that by 3 and get 30.
Because Danielle works an extra half an hour, divide 10 by 2 and get 5.
Danielle earns $35 in 3 hours and a half.
Hope this helps! Please mark me as brainliest!
Have a wonderful day :)
Find the slope intercept form and the point slope the line perpendicular to 4x-7y=2 going through (-6,1)
Answer:
Slope-intercept form: [tex]y=-\frac{7}{4}x-\frac{19}{2}[/tex]
Point-slope-form: [tex]y-1=-\frac{7}{4}(x+6)[/tex]
Step-by-step explanation:
Hi there!
We want to find the equation of the line perpendicular to the line 4x-7y=2 that goes through (-6, 1) in slope-intercept form, as well as the point-slope form
Slope-intercept form is defined as y=mx+b, where m is the slope and b is the y intercept
Point-slope form is defined as [tex]y-y_1=m(x-x_1)[/tex], where m is the slope and [tex](x_1, y_1)[/tex] is a point
Meanwhile, perpendicular lines have slopes that are negative and reciprocal. When they are multiplied together, the result is -1
So let's find the slope of the line 4x-7y=2
The equation of the line is in standard form, which is ax+by=c, where a, b, and c are integer coefficients a is non-negative, and a and b aren't 0
So let's find the slope of the line 4x-7y=2
One way to do that is to convert the equation of the line from standard form to slope-intercept form
Our goal is to isolate y onto one side
Subtract 4x from both sides
-7y=-4x+2
Divide both sides by -7
y=[tex]\frac{4}{7}x-\frac{2}{7}[/tex]
So the slope of the line 4x-7y=2 is [tex]\frac{4}{7}[/tex]
Now, we need to find the slope of the line perpendicular to it
Use this formula: [tex]m_1*m_2=-1[/tex]
[tex]m_1[/tex] in this case is [tex]\frac{4}{7}[/tex]
[tex]\frac{4}{7}m_2=-1[/tex]
Multiply both sides by [tex]\frac{7}{4}[/tex]
m=[tex]-\frac{7}{4}[/tex]
Let's see the equation of the perpendicular line so far in slope-intercept form:
y=[tex]\frac{-7}{4}x[/tex]+b
We need to find b now
The equation of the line passes through (-6,1), so we can use it to solve for b.
Substitute -6 as x and 1 as y
[tex]1=-\frac{7}{4}*-6+b[/tex]
Now multiply
1=[tex]\frac{42}{4}+b[/tex]
Subtract 42/4 from both sides to isolate b
-19/2=b
Substitute -19/2 as b into the equation
The equation in slope-intercept form y=[tex]\frac{-7}{4}x-\frac{19}{2}[/tex]
Now, here's the equation in point-slope form
Recall that the slope is [tex]\frac{-7}{4}[/tex] , our point is (-6, 1), and point-slope form is [tex]y-y_1=m(x-x_1)[/tex]
Let's label the value of everything to avoid any confusion
[tex]m=-\frac{7}{4} \\x_1=-6\\y_1=1[/tex]
Now substitute those values into the equation
[tex]y-1=-\frac{7}{4}(x--6)[/tex]
We can simplify the x--6 to x+6
[tex]y-1=-\frac{7}{4}(x+6)[/tex]
Hope this helps!
solve the equation:
|x+3| >2x-1
Answer:
x < 4
Step-by-step explanation:
|x+3| >2x-1 [|a| is the absolute value of a]
x+3 > 2x-1
4 > x
Therefore,
x < 4
The negative case doesn't have equal RHS and LHS so, it isn't valid.
Charlene is a salesperson. Let y represent her total pay (in dollars). Let x represent the number of
items she sells. Suppose that x and y are related by the equation y=32x + 1900.
What is Charlene's total pay if she doesn't sell any items?
A. $32
B. $1,900
C. $3,200
D. $19
3. If triangle ABC has the following measurements, find the measure of angle A.
a = 17
b = 21
C = 25
9514 1404 393
Answer:
(a) 42.3°
Step-by-step explanation:
Side 'a' is the shortest of three unequal sides, so angle A will be the smallest angle in the triangle. Its measure can be found from the Law of Cosines.
a² = b² +c² -2bc·cos(A)
cos(A) = (b² +c² -a²)/(2bc) = (21² +25² -17²)/(2·21·25) = 777/1050
A = arccos(777/1050) ≈ 42.3°
The measure of angle A is about 42.3°.
_____
Additional comment
The smallest angle in a triangle can never be greater than 60°. This lets you eliminate choices that exceed that value.
Answer:
(a) 42.3°
Step-by-step explanation:
how do i find the length of VN
Answer:
30
Step-by-step explanation:
let the length of VN be x
VNB ~ VMD
VN/VM = BN/DM
x/(30+x) = 12/24
24x=12(30+x)
24x=360+12x
12x=360
x = 30
A is the point (0, 8) and R is the point (5, 6). Find the point Con the y-axis such that angle ABC is 90°
Answer:
(0, -13/2) or (0, -6.5)
Step-by-step explanation:
a point on the y-axis means x=0.
so, the solution is a point (0, y).
and I assume (5, 6) is not R but is B.
for the angle at B being 90 degrees, we are looking at a right-angled triangle, and basic Pythagoras has to be true :
c² = a² + b²
with c being the Hypotenuse (the line opposite of the angle with the 90 degrees).
in our case, this c is the connection from A to C.
and a and b are the connections AB and BC.
so,
AC² = AB² + BC²
the distance between two points is again calculated via Pythagoras, where the differences in x and y directions are the sides, and the distance itself is the Hypotenuse.
so, we get
(0-0)² + (8-y)² = (0-5)² + (8-6)² + (5-0)² + (6-y)²
(8-y)² = -5² + 2² + 5² + (6-y)²
64 - 16y + y² = 25 + 4 + 25 + 36 - 12y + y²
64 - 16y + y² = 90 - 12y + y²
64 - 16y = 90 - 12y
-26 = 4y
y = -26/4 = -13/2 = -6.5
In Exercises 1-4, determine whether the dilated figure or the original figure is closer to the center of dilation. Use the given location of the center of dilation and scale factor k.
1. Center of dilation inside the figure; k = 3
Center of ditation inside the figure, k = 1/2
3. Center of dilation outside the figure: = 120%
4. Center of dilation outside the figure; k = 0.1
When the Center of dilation is inside the figure
The original figure is closer to the center of dilationThe dilated figure is closer to the the center of dilationWhen the Center of dilation is outside the figure
3. The original figure is closer to the the center of dilation
4. The dilated figure is closer to the center of dilation
The center of dilation is the fixed point from which the distances in a dilation are measured
The scale factor is ratio of the side lengths of an original figure or preimage to the side lengths of the newly formed image
Center of dilation is inside the figure
Where the center of dilation is inside the figure, and the scale factor is larger than 1, k = 3 > 1, we have;The distance of a point on the dilated figure, including the distances from the center of dilation is 3 times the distances of points on the original image from the center of dilation
Therefore, the original figure has a shorter distance to and is therefore closer to the the center of dilation than the dilated figure
2. Where the center of dilation is inside the figure, and the scale factor is a fraction between 0 and 1 k = 1/2, we have;
The distance of a point on the dilated figure, including the distances from the center of dilation is 1/2 times the distances of points on the original image from the center of dilation
Therefore, the dilated figure has a shorter distance to and is therefore closer to the the center of dilation than the original figure
Center of dilation outside the figure
3. Given that the center of dilation is outside the figure and the scale factor is larger than 1, k = 120% = 120/100 = 1.2 > 1, we have;
The distance of the dilated figure from the center of dilation is 120% of the distance of the original figure from the center of dilation, therefore, the original figure is closer to the the center of dilation than the dilated figure
4. Where the center of dilation is outside the figure and the scale factor is a fraction between 0 and 1, k = 0.1 < 1
The distance of the dilated figure from the center of dilation is only 0.1 times the distance of the original figure from the center of dilation, and therefore, the dilated figure is closer to the center of dilation
Learn more about scale factors and center of dilation here;
https://brainly.com/question/12162455
***CAN SOMEONE HELP ME PLEASE!!***
The polygon in each pair are similar. Find the missing side length
Answer:
45 / 27 = 30 / 18 = x / 24
x = 40
Step-by-step explanation:
Hi there!
The question here states that the two polygons are similar
Polygons that are similar have similar side length ratios.
If we want to find a side length we must create a proportional relationship
We are already given a partial proportional relationship.
Which is...
45 / __ = __ / 18 = x / __
First let's fill in the blanks
The side that is corresponding to the side with a length of 45 has a length of 27. So it would be 45/27
The side that is corresponding to the side with a length of 18 has a length of 30. So it would be 30/18
The side corresponding to side labeled "x" has a length of 24. so it would be x/24
So we would have
45 / 27 = 30 / 18 = x / 24
Now let's find x
We only need 2 ratios ( the one including x of course, and the other one can either be 30/18 or 45/27)
30 / 18 = x / 24
Now let's solve for x
Cross multiply
30*24=720
18*x=18x
We now have 18x = 720
Divide both sides by 18
18x / 18 = x
720 / 18 = 40
x = 40
To check our answers we can see if the ratios are similar
If they are then we are correct
45/27 = 1.66
30/18 =1.66
40/24 = 1.66
They are all equivalent meaning that our answers are correct
Convert 75 mg into gram
Answer:
[tex]{ \tt{1 \: mg = 1 \times {10}^{ - 3} \: g}} \\ { \tt{75 \: mg = (75 \times 1 \times {10}^{ - 3} ) \: g}} \\ { \bf{ = 75 \times 10 {}^{ - 3} \: grams}} \\ { \bf{ = 0.075 \: grams}}[/tex]
Challenge: For a particular job, the Amax Employment Agency charges a fee that is equal to 15% of the first
month's pay. If the job pays X dollars annually, express the agency fee algebraically.
Answer:
0.0125x or x/80
Step-by-step explanation:
Salary: x dollars per year
To find the pay per month, we divide the annual pay by 12.
The monthly pay is x/12
15% of the first month's salary is
15% of x/12 = 0.15 * x/12 = 0.0125x = x/80
Answer: 0.0125x
y= -(x+3)^2 -5
What is the leading coefficient?
How do you find the vertex?
Answer:
To find the leading coefficient, first expand the function:
[tex]y= -(x+3)^{2} -5\\\\y=-(x^{2} +6x+9)-5\\\\y=-x^{2} -6x-9-5\\\\y=-x^{2} -6x-14[/tex]
The leading coefficient is the coefficient of the highest-order term, which, in this case, would be the -1 from -x².
To find the vertex: see image below
Vertex = (-3, -5)
Find the circumference and the area of a circle with diameter equal to 8.6 inches. Use 3.14 for pi
Please answer it will mean a lot thanks
Answer: Circumference of circle = 27.004 inches
Area of circle = 58.0586 inches²
Step-by-step explanation:
Diameter of circle = 8.6 inches
Pi ([tex]\pi[/tex]) = 3.14
Circumference of circle (With diameter) = [tex]\pi \\[/tex]d ([tex]\pi[/tex]×diameter)
= 3.14 × 8.6
= 27.004 inches
Area of circle (With diameter) = [tex]\pi[/tex][tex]d^{2}[/tex]/4
= 3.14 × 8.6 × 8.6 / 4
= 3.14 × 73.96 / 4
= 58.0586 inches²
PLEASE HELP!! Important test!! Option 1 isn't coming up so if you could try to solve others that would be great!
Answer:
4
Step-by-step explanation:
Func 2 is -2
Func 3 is 1
Func 4 is 8
Func 1 is unknown
I don’t know if I get this right so can someone correct it or check it ?
Answer:
i think thats right
Step-by-step explanation:
If Tan A=5/12 then find cot A, cos A and Sin A
Cot A=1/tan A=12/5
cos A= 12/13
sin A=5/13
Draw a right angled triangle
the hypotenuse is the longest side which is 13 using Pythagoras theorem
the side opposite the angle A is 5
the side closest to the angle A which is called the adjacent is 12
sinA =opp/hyp
cos A= adj/hyp
cotA =1/tanA=cos A/sinA
Note: Pythagoras theorem is
hyp²=opp²+adj²
Answer:
Step-by-step explanation:
[tex]tan \ A = \frac{5}{12}=\frac{opposite \ site}{adjacent \ side}[/tex]
hypotenuse² = (opposite side)² + (adjacent side)²
= 5² + 12²
= 25 + 144
= 169
hypotenuse = √169 = √13*13 = 13
[tex]Cot \ A = \frac{adjacent \ side}{opposite \ side}=\frac{12}{5}\\\\Cos \ A = \frac{adjacent \ side}{hypotenuse}=\frac{12}{13}\\\\Sin \ A = \frac{opposite \ side}{hypotenuse}=\frac{5}{13}[/tex]
What is the answer when you evaluate m + p - p2 ÷ 6; use m = 5 and p = 6 ?
Answer:
5
Step-by-step explanation:
m + p - p^2 ÷ 6
Let m = 5 and p=6
5 + 6 - 6^2 ÷ 6
Exponents first
5 + 6 - 36 ÷ 6
Then divide
5 + 6 - 6
Then add and subtract from left to right
11-6
5