Answers
Related Questions
3. A sample of neon gas has a volume of 1.2 L at 28.5°C. What will the volume be at 125°C it the
pressure remains constant?
Answers
Answer:
1.58L
Explanation:
Given parameters:
Initial volume = 1.2L
Initial temperature = 28.5°C = 28.5 + 273 = 301.5K
Final temperature = 125°C = 125 + 273 = 398K
Unknown:
New volume = ?
Solution:
Volume and temperature relationship is resolved using the Charles's law.
The law states that "the volume of a fixed mass of a gas varies directly as its absolute temperature if the the pressure is constant".
So;
[tex]\frac{V1}{T1}[/tex] = [tex]\frac{V2}{T2}[/tex]
V1 is the initial volume
T1 is the initial temperature
V2 is the new volume
T2 is the new temperature
[tex]\frac{1.2}{301.5}[/tex] = [tex]\frac{V2}{398}[/tex]
301.5V2 = 477.6
V2 = 1.58L
Is water a reactant or product?
Answers
Answer: Reactant
Explanation:
In simple wording, Water act as a reactant and it broke or we can say split the larger molecule in the smaller ones, The H and OH bonds are attached to the two products that are formed after the reaction. Another process in which water is used as an important reactant is photosynthesis.
A student increases the temperature of a 673 cm^3 balloon from 275 K to 460 K.
Assuming constant pressure, what should the new volume of the balloon be?
Round your answer to one decimal place.
Answers
Answer:
1125.75 cm³
Explanation:
We are given;
Initial volume; V1 = 673 cm³
Initial temperature; T1 = 275 K
Final temperature; T2 = 460 K
From Charles law, we can find the new volume from;
V1/T1 = V2/T2
V2 = (V1 × T2)/T1
V2 = (673 × 460)/275
V2 = 1125.75 cm³
C3Hg + 02 → CO2 + H2O
This chemical equation represents the combustion of propane. When correctly balanced, the coefficient for water
is
16.
2.
8.
4.
Answers
Answer:
4
Explanation:
The following equation, which depicts the combustion of propane, is given in this question as follows:
C3H8 + 02 → CO2 + H2O
However, this equation is not yet BALANCED because the number of atoms of each element is not the same on the reactant and product side. To balance the equation, we make use of COEFFICIENT to ensure that the number of atoms of each element on both side correlates.
The balanced equation is as follows:
C3H8 + 502 → 3CO2 + 4H2O
Therefore, the coefficient for water (H2O) after balancing the equation is 4.
The study of chemicals is called chemistry.
The correct answer is D.
The equation is not yet BALANCED because the number of atoms of each element is not the same on the reactant and product sides.
To balance the equation, we make use of COEFFICIENT to ensure that the number of atoms of each element on both sides correlates.
After balancing the equation is as follows:
[tex]C_3H_8 + 50_2 → 3CO_2 + 4H_2O[/tex]
Hence, the correct answer is 4 which shows the balanced water.
For more information, refer to the link:-
https://brainly.com/question/12985618
How to calculate the number of molecules in 18g of H2O
Answers
We, know molecular mass of water is, M = 16 g/mol .
Given mass of water, m = 18 g.
We know, number of moles is given by :
[tex]n = \dfrac{18\ g}{16 \ g/mol}\\\\n = 1.125\ moles[/tex]
Now, 1 mole of any compound contains 6.022 × 10²³ molecules.
So, number of moles in 1.125 moles of water is 1.125 × 6.022 × 10²³ =
6.77 × 10²³ molecules.
Hence, this is the required solution.
Which technique helps you become more resoureful
Answers
Answer:
There is an abundance of technology to help students become more resourceful and productive. For example, mind mapping can help kids better understand problems and devise plans by visualizing connections, outlining different sides of issues, and determining next steps.
Explanation:
Set concrete goals. To become successful faster, you first need a road map for your career. ...
Establish a routine, and stick to it. ...
Find a mentor. ...
Streamline your routine. ...
Learn how to say no. ...
Be smart about money. ...
Learn from your mistakes.
1. A dry, empty bottle is placed in an ice bath. After the air inside the bottle is cooled off, a balloon is placed
over the opening. The bottle with the balloon is then placed in very hot water and the balloon inflated. Why
did the balloon inflate?
Answers
Answer:
hot air rises and expanded the balloon
Explanation:
thats it.
6. A father rabbit had long ears while the mother rabbit had short ears. Which of these statements
explains why one of the baby bunnies could have long ears?
a
The baby bunny inherited its copies of the gene for ear length from its father and not from
its mother. Those genes connect together to make its ears long.
b
The baby bunny inherited its copies of the gene for ear length from its father and not from
its mother. Just like its father's genes, those genes instruct for proteins that connect in
ways that make its ears long.
С
The baby bunny inherited one copy of the gene for ear length from its father and one copy
from its mother. That gene combination instructs for proteins that connect in ways that
make long ears.
d
The baby bunny inherited one copy of the gene for ear length from its father and one copy
from its mother. Those genes connect together to make its long ears.
Answers
Answer:
D if I’m correct
Explanation:
why do astronauts on the moon seem like they're "Walking on springs" while on earth we are firmly attached to the ground
Answers
Our muscles a built to carry us on the earth. The astronauts are used to walking on earth so when they push forward with their legs they tend to use the same amount of energy which is 4 times more than needed. That push causes them to rise, Newton's second law
Determine the number of valence electrons for each of the following:
O
Cs
Ca
Se2-
Na+
C
N
Al
He
Answers
Cs has 8
Ca has 2
Se2 has 18
Na+ has 1
C has 4
N has 5
AI has 3
He has 2
There those are the answers!!!
The proton number of barium (Ba) is 56. It is in Group II of the periidic table how many electrons would you expect a barium atom to contain in its outer energy level?
Answers
Answer:
A barium atom would be expected to contain 2 electrons in its outer energy level.
Explanation:
The columns of the periodic table are called groups. There are eighteen groups, numbered from 1 to 18.
The elements of each group have the same number of electrons in their last atomic shell, which is why they have similar chemical properties, because the chemical properties of chemical elements are strongly related to the electrons located in the last atomic shell.
That is, in a group, the chemical properties are very similar, because all the elements of the group have the same number of electrons in their last or last shells.
A barium atom would be expected to contain 2 electrons in its outer energy level.
Energy of motion is called ________energy *
Answers
.............
Answer:
Kinetic - Kinetic energy is the energy of motion
Explanation:
Thermal energy - heat energy
Potential energy - energy that is stored
Hope this helped!
Have a supercalifragilisticexpialidocious day!
Please help with this
Answers
Which ion forms the strongest ionic bond with a given anion?
Answers
Answer:
Explanation:
A cation with a 2+ charge will make a stronger ionic bond than a cation with a 1+ charge. A larger ion makes a weaker ionic bond because of the greater distance between its electrons and the nucleus of the oppositely charged ion.
An object has a volume of 825 cm3 and a density of 13.6 g/cm3. Find its
mass
Answers
step by step explanation:
D= M/V
M= DV
M= (13.6 g/cm^3) (825cm^3)
M= 11,200 g
The mass of an object is the product of its volume and density. The mass of a the object with a volume of 825 cm³ and a density of 13.6 g/cm³ is 11220 g.
What is density ?Density of substance is the measure of its mass per unit volume. It describes how closely its particles are packed. Density depends on the bond type, temperature and pressure.
Volume of the object is the space occupied by its particles. Volume can be expressed in L, ml, cm³, dm³ etc. Only solids and liquids has a definite volume and the volume of gases is that of the container.
Give that, volume of the object = 825 cm³
density = 13.6 g/cm³
Mass = volume × density
m = 825 cm³ × 13.6 g/cm³ = 11220 g
Therefore, the mass of the object is 11220 g.
Find more on density:
https://brainly.com/question/15164682
#SPJ2
Low, gray, layered clouds that cover the sky and bring steady rain are O A. cumulus O B. cirrus O C. cumulonimbus OD. nimbostratus
Answers
Answer:
D Nimbostratus
Explanation:
The complete combustion of acetic acid, HC2H3O2(I) to form water, H2O(I), and CO2(g), at constant pressure releases 871.7 kJ of heat per mol of acetic acid.
Write a balanced thermochemical equation if 5.0g of acetic acid will be used in the reaction.
HC2H3O2(I) + O2 --- H2O(I) + CO2(g) H= -871.7 kJ
Answers
Answer:
HC2H3O2(I) + O2(g) ---> H2O(I) + CO2(g) ΔH= -72.35 kJ
Explanation:
We know that 5.0 g of acetic acid will contain, 5.0g/60 g/mol = 0.083 moles of acetic acid
Now from the reaction equation;
1 mole of acetic acid evolved -871.7 KJ of heat
0.083 moles of acetic acid will evolve 0.083 * -871.7 = -72.35 KJ
For 5.0 g of acetic acid, we can write;
HC2H3O2(I) + O2(g) ---> H2O(I) + CO2(g) ΔH= -72.35 kJ
The Aufbau Principle describes that
O electrons with the same spin cannot occupy the same orbital.
electrons will occupy single orbitals within and energy level before doubling up
electrons fill lower energy levels first before occupying higher energy levels.
O electrons in the same level have the same amount of energy
Answers
Answer:
electrons fill lower energy levels first before occupying higher energy levels.
Explanation:
The Aufbau's principle describes that electrons fill lower energy levels first before occupying higher energy levels.
In writing the electronic configuration of atoms, the Aufbau's principle is one of the most important principles to consider.
It states that "sublevels with with lower energies are filled up before those with higher energies".
Sublevels do not fill up in numerical order.
How many grams of NH3 are needed to make 2.50 moles of (NH4)2SO4?
2 NH3(g) + H2SO4(aq) --> (NH4)2SO4(aq)
Answers
Answer:
85.155g NH3
Explanation:
show how to work out...Calculate the mass in grams of 3.50 x 1025 atoms of lithium. Answer: 404g Li
Answers
_____ are bits and pieces of material that end up in a body of water.
Answers
Answer:
sediments
Explanation:
how does the concentration of sodium thiosulphate affect the rate of reaction in between hydrochloric acid and sodium thiosulphate
Answers
Answer: C
Explanation:
I know because i did it.
Which of the following is not a unit of volume?
A
L
B
mL
C
m^3
3
D
cm^2
2
PLEASE ANSWER ASAP !! NEED THIS HANDED IN TN
Answers
Answer:
The orest one is possible D
Explanation:
What does microbiome do to your cells?
Answers
would using a strainer be filtration?
Answers
Answer:
To some extent, yes
Explanation:
Complete the following sentence: In a reaction containing two reactants, if one of the reactants is in excess, the other reactant is known as the ______ reactant.
Answers
Answer:
excess reactant
Explanation:
The excess reactant is the reactant in a chemical reaction with a greater amount than necessary to react completely with the limiting reactant. It is the reactant(s) that remain after a chemical reaction has reached equilibrium.
In a reaction containing two reactants, if one of the reactants is in excess, the other reactant is known as the limiting reactant which decides the yield of the reaction.
What is limiting reactant ?In a reaction, all the reactants have to be in correct stoichiometry to complete the reaction. To achieve the mole ratio of the reactants is very much important for the completion of a reaction.
If a reactant is insufficient in amount, then the reaction will stop as soon as this reactant is consumed. Hence, this reactant determine the yield of the product. This reactant which is not in correct stoichiometry for the complete reaction is called the limiting reactant.
The reactant which is excess in quantity thus does not have a role in the yield of the reaction is called the excess reactant. Whatever, the concentration of this reactant in extra, the reaction does not proceed after the consumption of limiting reactant.
Find more on limiting reactant :
https://brainly.com/question/14225536
#SPJ2
Some students believe that teachers are full of hot air. If I inhale 2.1 liters of gas at a temperature of 200 C and it heats to a temperature of 370 C in my lungs, what is the new volume of the gas?
Answers
Answer:
2.86L
Explanation:
Given parameters:
V1 = 2.1L
T1 = 200°C = 200 + 273 = 473K
T 2 = 370°C = 370 + 273 = 643K
Unknown:
V2 = ?
Solution:
Since pressure is constant, we apply the Charles's law;
[tex]\frac{V1}{T1}[/tex] = [tex]\frac{V2}{T2}[/tex]
V is volume
T is the temperature
1 is the initial state
2 is the new state
[tex]\frac{2.1}{473}[/tex] = [tex]\frac{V2}{643}[/tex]
V2 = 2.86L
5. Solve the following crossword puzzle.
a. Maximum energy generation in India is done using ........ energy.
b. energy is a renewablesource of
energy.
c.Solar energy can be called.... energy.
e. ......... energy of water in dams is used for generation of electricity.
Answers
Answer:
I think it is b
Explanation:
Which job title describes a person with a career in green energy?
Answers
Answer:
Natural resource professional
Explanation:
The job title that describes a person with a career in green energy is a hydroelectric technician. The correct option is c.
What is green energy?Green energy is renewable energy and these energies are produced by renewable resources. Renewable resources are the resources that will not be reduced, and these natural resources are present, and these energies can reproduce again by these resources.
The hydroelectric technician is the person who checks the technical problems of a hydroelectric power plant. Hydroelectricity is produced by water.
This is a renewable resource, and it does not produce any kind of pollution, So a hydroelectric technician will be a job title that describes a person with a career in green energy.
Therefore, the correct option is c., hydroelectric technician.
To learn more about renewable energy, refer to the link:
https://brainly.com/question/17373437
#SPJ2
The question is incomplete. Your most probably complete question is given below:
Elevator installer
sewing machine operator
hydroelectric technician
animal trainer
Ionic bonds form between _____ which form positively charged ions and _____ which form negatively charged ions.
Answers
ionic bonds form between metals which form positively charged ions and nonmetals which form negatively charged ions.
