Give the products (if any) expected from the treatment of each of the following compounds with ozone followed by dimethyl sulfide.

A compound that is defined by its ability to produce hydroxide ions when dissolved in water is known as a base.

Bases are compounds that dissolve in water to form hydroxide ions (OH-). They are hydroxide ion donors, to be precise. Bases have a pH value greater than 7. The OH- ions are released when bases are dissolved in water. Sodium hydroxide (NaOH) is a good example of a base.

When NaOH is dissolved in water, it produces hydroxide ions (OH-) and sodium ions (Na+). As a result, the solution is more basic, and the pH is greater than 7. The following are some examples of bases:

Bases are commonly utilized in several chemical reactions. They're utilized as pH modifiers, reagents, and buffer solutions, among other things. They are also used in industries like cosmetics, detergents, and food. Furthermore, they are utilized in water treatment plants to control acidity levels and remove impurities.

Therefore, a compound that is defined by its ability to produce hydroxide ions when dissolved in water is known as a base.

To know more about hydroxide ions click here:

https://brainly.com/question/14619642

#SPJ11

At pH-7.4, Arginine (Arg or R) is classified as a charged polar amino acid, as it contains a positively charged side chain.

The positively charged side chain is formed by the guanidinium group of the amino acid. Lysine (Lys or K) is classified as a nonpolar amino acid, as it contains a hydrocarbon side chain with no charged polar group.

Threonine (Thr or T) is classified as an uncharged polar amino acid, as it contains a polar OH group. Histidine (His or H) is classified as a charged polar amino acid, as it contains a positively charged imidazole side chain.

Lastly, 4-Hydroxyproline (unnatural) is classified as an uncharged polar amino acid, as it contains a polar OH group.

Polarity plays an important role in proteins and the structure of amino acids. The charged polar amino acids contain a side chain that consists of an electrically charged group.

These amino acids are hydrophilic and will form hydrogen bonds with other amino acids in the protein. Nonpolar amino acids contain a side chain that is composed of only carbon and hydrogen atoms, which have no charge.

These amino acids are hydrophobic, meaning that they tend to repel water, and form hydrophobic interactions with other amino acids in the protein.

Uncharged polar amino acids have side chains that contain polar molecules that have no charge, but they are still hydrophilic and can form hydrogen bonds with other amino acids in the protein.

Amino acid polarity is an important factor that affects protein structure and how amino acids interact with each other.

By understanding the polarity of an amino acid, researchers can better understand how an amino acid fits into the protein structure and what interactions it can form with other amino acids.

to know more about Arginine refer here:

https://brainly.com/question/13589467#

#SPJ11

Answer: 16

Explanation: Hence, the mass number of an oxygen atom = 8 + 8 = 16.

The given statement that "the rate of a second order reaction can depend on the concentrations of more than one reactant" is true because the rate of the reaction is proportional to the concentration of both reactants.

The second-order reaction is a chemical reaction in which two reactants interact and the rate of the reaction is proportional to the concentration of both reactants or to the square of the concentration of a single reactant. The equation is as follows:

k = k[reactant1] [reactant2] or k = k[reactant1]²

The reaction rate constant (k) for a second-order reaction is proportional to the concentration of one or two reactants. The concentration of the reactants has an impact on the reaction rate, as indicated by the order of the reaction.

Therefore, the statement that "the rate of a second order reaction can depend on the concentrations of more than one reactant" is true.

Learn more about second-order reaction here: https://brainly.com/question/14520581.

#SPJ11

The chemical formula of 4- ethyl is C19H40.   This  patch is composed of an ethyl group( C2H5) attached to the fourth carbon  snippet( counting from one end) of a direct carbon chain.

It also has a propyl group( C3H7) attached to the fifth carbon  snippet of the same chain. The chain itself has 12 carbon  tittles and three methyl groups(- CH3) attached to the 3rd, 4th, and 7th carbon  tittles. thus, the complete name of the  emulsion is 4- ethyl, where" dodecane" refers to the 12- carbon chain.

This  patch belongs to the class of alkanes, which are hydrocarbons that only contain single bonds between carbon  tittles. The presence of the ethyl and propyl groups creates branching in the carbon chain, which can affect its physical and chemical  parcels compared to a direct alkane with the same number of carbon  tittles. The three methyl groups contribute to the  patch's overall shape and may also affect its reactivity.

Learn more about chemical formula at

https://brainly.com/question/12484831

#SPJ4

The question in english language is as follows:

What is the formula of 4-ethyl-5-propyl-3,4,7-trimethyldecane?

The statement "enzymes reduce entropy of their substrates in reactions with multiple reactants" is possible because enzymes lower the activation energy of chemical reactions.

Enzymes are biocatalysts that are produced by living organisms. They can increase the rate of chemical reactions without being consumed during the process. Enzymes are proteins made up of chains of amino acids, and their function is determined by their three-dimensional shape.

Enzymes reduce the entropy of their substrates in reactions with multiple reactants. This is possible because they lower the activation energy of chemical reactions. By lowering the activation energy, enzymes make it easier for the reactants to react with one another. Enzymes make chemical reactions more efficient and faster than they would be without the enzyme.

The Arrhenius equation shows the dependence of the rate constant of a chemical reaction on the temperature, activation energy, and frequency factor. The frequency factor represents the frequency at which reactant molecules collide and produce products. When enzymes are present, the activation energy required for the chemical reaction is lowered, making the frequency factor and the rate constant of the reaction higher. This leads to an increase in the rate of the chemical reaction.

The equation is given as; k = Ae-Ea/RT,

Where

Learn more about enzymes: https://brainly.com/question/1596855

#SPJ11

A Bronsted-Lowry base is a proton acceptor. A Bronsted-Lowry base must contain an available lone pair of electrons in its formula in order to form a covalent bond to the H+. This bond forms when the base accepts the proton (H+) from the

For more similar questions on topic acid. The acid donates a proton and becomes a conjugate base while the base accepts a proton and becomes a conjugate acid. Bronsted-Lowry bases are very important in acid-base chemistry as they react with acids to form salts and water. These reactions are called acid-base neutralization reactions and they form the basis of many chemical processes.

The Bronsted-Lowry theory is one of the most widely used acid-base theories in chemistry. According to this theory, an acid is a proton donor while a base is a proton acceptor. This definition is more general than the Arrhenius definition which defines an acid as a compound that produces hydrogen ions (H+) in solution and a base as a compound that produces hydroxide ions (OH-) in solution. The Bronsted-Lowry theory can also explain reactions involving molecules that do not contain hydroxide ions. For example, ammonia (NH3) is a Bronsted-Lowry base because it can accept a proton from an acid.

A Bronsted-Lowry base must contain an available lone pair of electrons in its formula. This lone pair of electrons is essential for the base to form a covalent bond to the H+ ion. The H+ ion is a proton that is donated by the acid. When the base accepts the proton, it becomes a conjugate acid. For example, NH3 accepts a proton from HCl to form NH4+ and Cl-. NH3 is the base while HCl is the acid. NH4+ is the conjugate acid of NH3 while Cl- is the conjugate base of HCl.

A Bronsted-Lowry base is a proton acceptor. A Bronsted-Lowry base must contain an available lone pair of electrons in its formula to form a(n) covalent bond to the H+.

Let's understand this in detail:

Bronsted-Lowry theory defines an acid as a substance that donates a proton (H+ ion) and a base as a substance that accepts a proton. Thus, a Bronsted-Lowry base is a proton acceptor.

For example, in the reaction between ammonia and water:

NH3 + H2O ↔ NH4+ + OH-

Ammonia is the base as it accepts the proton from the water molecule to form ammonium ion (NH4+).

A Bronsted-Lowry base must contain an available lone pair of electrons in its formula to form a covalent bond to the H+. This is because the H+ ion (proton) is attracted to the electrons in the base, forming a covalent bond.

The base needs to have a pair of electrons available to form this bond.

Learn more about Bronsted-Lowry base: In the Bronsted-Lowry Theory of acids and bases, an acid is this. https://brainly.com/question/15516010

#SPJ11

Answer:

Explanation:

A lever is a simple machine that can be used to increase the force or distance of an applied effort. The three main parts of a lever are the fulcrum, resistance arm, and effort arm.

The mechanical advantage of a lever depends on the ratio of the length of the effort arm to the length of the resistance arm. A longer effort arm will require less force to lift a load, but will require more distance to be moved. Conversely, a shorter effort arm will require more force to lift a load, but will require less distance to be moved.

The correct order of species based on their ability to act as an oxidizing agent is Au3+ > Fe2+ > Ni2+ > Na+.

The ability to act as an oxidizing agent varies among different species. In the given set of species, the order of their ability to act as an oxidizing agent from the best to the poorest is as follows:

Au3+ > Fe2+ > Ni2+ > Na+

Au3+ is the best oxidizing agent as it has the maximum tendency to accept electrons and undergo reduction.

Fe2+ is a better oxidizing agent than Ni2+ and Na+ because it can accept two electrons easily and undergoes reduction. Ni2+ is a weaker oxidizing agent than Fe2+ and Na+ as it can only accept electrons and undergoes reduction. Na+ is the poorest oxidizing agent as it has the least tendency to accept electrons and undergo reduction. It is the best reducing agent as it readily donates an electron to become Na.

For more such questions on oxidizing agent, click on:

https://brainly.com/question/14041413

#SPJ11

Methanol, or CH3OH, is a Brnsted-Lowry base in this reaction because it can receive a proton from the hydroxide ion, or OH-, to generate CH3O- (methoxide ion).

The Brnsted-Lowry base OH- (hydroxide ion), on the other hand, may transfer a proton (H+) to[tex]CH3OH[/tex]to create H2O. (water).So the reactants are CH3OH (base) and OH- (base), and the products are CH3O- (conjugate base of CH3OH) and H2O (conjugate acid of OH-).I apologize for the mistake in my previous response. You are correct that methanol, or CH3OH, is a Brønsted-Lowry acid in this reaction because it donates a proton (H+) to the hydroxide ion (OH-) to form CH3O- (methoxide ion). The hydroxide ion (OH-) is a Brønsted-Lowry base because it accepts a proton (H+) from CH3OH to form H2O (water). Therefore, the reactants are [tex]CH3OH[/tex]  (acid) and OH- (base), and the products are CH3O- (conjugate base of CH3OH) and H2O (conjugate acid of OH-).

learn more about Methanol, or CH3OH here:

https://brainly.com/question/14278895

#SPJ4

The volume of the dry gas at STP when a 32.0 mL sample of hydrogen is collected over water at 20.0 degrees Celsius and 750.0 torr is 31.1 mL.

There is a formula used to calculate the volume of dry gas at STP given a sample of hydrogen gas collected over water at a specific temperature and pressure, which is as follows:

Vd = Vw - Vh2o

Vd = volume of the dry gas, Vw = volume of the wet gas, Vh2o = vapor pressure of water at a given temperature

The next thing is to calculate Vw which is the volume of the wet gas.

Vw = Vtotal - Vh2o

Vtotal = total volume of the gas collected, Vh2o = volume of the water collected

In the question, the volume of the hydrogen gas collected over water at 20.0 degrees Celsius and 750.0 torr is 32.0 mL.

Vh2o = P × V / R × T

where, P = pressure = 17.5 torr, V = volume of the water collected = 0.0 mL (not given)

Vh2o = 0.0 torr × mL / 62.36 (L•torr/K•mol) × (293.15 K) = 0.0 mL

The total volume of the gas collected, Vtotal = Vh2o + Vw + Vh2 = 0.0 mL + 32.0 mL + 0.0 mL = 32.0 mL

Now we can calculate Vw as follows: Vw = Vtotal - Vh2o = 32.0 mL - 0.0 mL = 32.0 mL

Finally, we can calculate the volume of the dry gas at STP: Vd = Vw - Vh2o

Vd = 32.0 mL - 0.9 mL ≈ 31.1 mL

Therefore, the volume of the dry gas at STP when a 32.0 mL sample of hydrogen is collected over water at 20.0 degrees Celsius and 750.0 torr is 31.1 mL.

Learn more about Volume of gas here:

https://brainly.com/question/24189159

#SPJ11

Explanation:

An element is a pure substance that cannot be separated into simpler substances by chemical or physical means.

The symbol "en" in this context is not related to the chemical reaction given in the question. "en" is actually an abbreviation for ethylenediamine, which is a type of ligand commonly used in coordination chemistry.

When water is added to anhydrous copper(II) sulfate, two observations are made:

The blue color of anhydrous copper(II) sulfate turns into a deep blue color as the water is added. This is because the anhydrous copper(II) sulfate is undergoing an exothermic reaction with the water to form hydrated copper(II) sulfate, which is blue in color.

As more water is added, the color becomes lighter and eventually the solution becomes clear. This indicates that all of the anhydrous copper(II) sulfate has reacted with water to form hydrated copper(II) sulfate.

Cobalt chloride can be used as a test for the presence of water because it is a hydrate that changes color when it loses its water of hydration. Anhydrous cobalt chloride is blue in color, while hydrated cobalt chloride is pink. When water is added to anhydrous cobalt chloride, it reacts with the water to form hydrated cobalt chloride, which is pink in color. This color change can be used to test for the presence of water in a sample.

To know more about the Anhydrous, here

https://brainly.com/question/14745510

#SPJ4

The concentration of the cyanide ion, CN-(aq) would be 0.440 mol/L (assuming the stoichiometry of the reaction).

The stoichiometry of the reaction is 1:2, meaning that for every 1 mole of NaAu(CN)2(aq) consumed, 2 moles of CN-(aq) are produced.

Assuming the stoichiometry of the reaction, the concentration of Au+(aq) would be 0.550 mol/L.

Since NaAu(CN)2 dissociates to form one Au(CN)2- ion and two CN- ions, the concentration of CN- ions would be double the concentration of NaAu(CN)2. Therefore, the concentration of CN-(aq) would be 0.220 mol/L x 2 = 0.440 mol/L.

Learn more about cyanide ion here:

https://brainly.com/question/29643748

#SPJ1

The pKa will be higher in the unknown acid solution. The pH of the unknown acids would not be affected by several drops of NaOH solution.

The pKa of the unknown acid would be higher if the pH meter was incorrectly calibrated to read lower than the actual pH. This is because if the pH meter reads lower than the actual pH, the measured pH would be lower than the actual pH.

As pKa is the negative logarithm of the acid dissociation constant, Ka, which is directly proportional to the hydrogen ion concentration, [H⁺], a decrease in the measured pH would lead to a decrease in the measured [H⁺]. Since:

pKa = -log Ka = -log [H⁺] + log [HA], a decrease in [H⁺] would lead to an increase in pKa.

The pKa of the unknown acid would not be affected if several drops of NaOH missed the reaction beaker and fell onto the bench top. This is because the number of moles of NaOH that react with the unknown acid is not affected by the drops that miss the beaker.

The number of moles of NaOH that react with the unknown acid is determined by the volume and the concentration of NaOH added to the beaker and the volume and the concentration of the unknown acid in the beaker. Therefore, the pKa would remain the same.

The pKa of the unknown acid would not be affected if acid was dissolved in 75 mL of distilled water rather than 50 mL of distilled water. This is because the pKa of an acid is an intrinsic property that is independent of the amount of the acid. The pKa is determined by the acid itself, not by the amount of acid. Therefore, the pKa would remain the same.

Learn more about pH here:

https://brainly.com/question/31035487

#SPJ11

Answer:

Explanation:

Magnesium chloride is a compound composed of magnesium and chlorine ions. When it is dissolved in water, it dissociates into its constituent ions, which are surrounded by water molecules.

The color of the solution depends on the presence of any other ions that may be present. In the case of magnesium chloride, it is colorless in its pure form, and the color of the solution is determined by the presence of the chloride ions.

When the solution is dilute, it appears colorless. As the concentration of chloride ions increases, the color of the solution changes from light green to deep green, and finally to brownish-red. The intensity of the color is proportional to the concentration of chloride ions present.

The color change is due to the interaction between the chloride ions and the water molecules surrounding them, which absorb specific wavelengths of light. This absorption causes the solution to appear colored to the human eye. Therefore, the different colors observed in the solution of magnesium chloride and water are due to the presence of chloride ions and the concentration of these ions.

Answer:

Magnesium chloride dissolves in water to give a faintly acidic solution (pH = approximately 6).

The appearance of this reaction or solution is a bright white powder (in the picture)

The ion which makes this white powdery figure for magnesium chloride are salts that are highly soluble in water, for example: sodium ion (Na+).

High electron affinity implies more easily accepts electrons because the increase in atomic size decrease the effective nuclear charge.

   O < I < Ar <  Na < Ne

The term Electron affinity is also designated as EA. It is defined as the change in energy of a neutral atom that is in the gaseous phase when an electron is added to the atom to form a negative ion. We can say the the neutral atom's likelihood of gaining an electron. It is the amount of energy released when an electron attaches to a neutral atom or molecule in the gaseous state to form an anion. We can simply say when an electron is added to the isolated gaseous atom energy is released that is more precisely known as the electron affinity. It is the energy required for the isolation of an electron from the singly charged gaseous negative ion.

To learn more about Electron Affinity

https://brainly.com/question/977718

#SPJ4

the change in regioselectivity of the addition of HBr to an alkrne or alkyne in the presence of a peroxide

Answer:

Explanation:

The change in regioselectivity of the addition of HBr to an alkene or alkyne in the presence of a peroxide.

The value of Kp for the reaction with equilibrium pressure of A is given as PA = 0.20 atm and the initial pressure of A is 0.0190.

To find the value of Kp for the reaction, we will use the expression for the equilibrium constant in terms of the partial pressures of the reactants and the products.

Kp = (PB)²/PA

where, PB is the equilibrium pressure of B.

Initially, there is no B in the reaction vessel, so the change in pressure of B is equal to its equilibrium pressure. Using the law of conservation of mass, we can write:

PV = nRT

where, P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature.

Since there is no change in volume or temperature, we can write:

PV = constant or P₁V₁ = P₂V₂

where, P₁ and P₂ are the initial and equilibrium pressures of A, respectively. Since A is the only gas initially present in the reaction vessel, we can write:

P₁ = PA = 1.19 atm, P₂ = 0.20 atm V₁ = V₂

Therefore, P₁V₁ = P₂V₂ = PAV₁ = PBV₂

Since, the number of moles of A and B are related by the balanced chemical equation, we can write:

2(PB) = nB

Substituting, PB in terms of PA and V1, we get:

Kp = (PB)²/PA = (nB/2V₂)²/PA

Kp= (nB/2PAV₁)²/PA= (nB)²/(4P²AV₁)

where, nB is the number of moles of B.

To find the number of moles of B, we use the balanced chemical equation. 2 moles of B are produced for every mole of A that reacts. Since, the initial pressure of A was 1.19 atm and the equilibrium pressure of A was 0.20 atm, 0.99 atm of A has reacted.

Therefore, the number of moles of A that has reacted is:

nB = (0.99/1.19) = 0.8327 mol

The total number of moles of the system is the sum of the moles of A and B initially present in the reaction vessel.

nTotal = nA + nB

Initially, only A is present, so nTotal = nA = 1 mol. The number of moles of B is therefore:

nB = nTotal - nA = 1 - 0.8327 = 0.1673 mol

Substituting the values of PA, nB, and V1, we get:

Kp = (nB)²/(4P²AV1) = (0.1673)²/(4 × 1.19² × 1) = 0.0190

Therefore, the value of Kp for the reaction is 0.0190.

Learn more about Kp here:

https://brainly.com/question/30550192

#SPJ11

The option for which we can directly compare the Ksp values to determine their relative solubilities are Ag₂CrO₄ and AgBr. Thus, the correct option is A.

Relative solubilities can be directly compared with Ksp values to determine the relative solubilities of Ag₂CrO₄ and AgBr. Solubility Product Constant (Ksp) is the term which is used to describe the equilibrium constant that exists between a solid and its ions in a solution.

In addition to Ag₂CrO₄ and AgBr, the solubilities of the other given compounds cannot be determined using their Ksp values since they are not in the same class of compounds. Ksp can be defined as the product of the concentrations of its ions to a specific power, which is known as the solubility product. For every solute, the Ksp has a unique value. The Ksp is not reliant on the concentration of the solute.

Therefore, the correct option is A.

Learn more about Relative solubilities here:

https://brainly.com/question/26802361

#SPJ11

Answer:

The only difference is that ozone is made up of three oxygen atoms, while the stuff we breathe (molecular oxygen) is made up of only two atoms. Solar rays high in the atmosphere convert O2 to O3. In the upper atmosphere, rays from the Sun break a normal oxygen molecule into two separate oxygen atoms.

Fermentation functions in anaerobic (oxygen-free) conditions.

Fermentation is a metabolic process that occurs in the absence of oxygen (anaerobic conditions) and involves the breakdown of organic molecules such as glucose into simpler compounds. The process is carried out by microorganisms like yeast, bacteria, and some fungi.

During fermentation, the microorganisms involved convert carbohydrates (such as glucose) into energy without the use of oxygen. This process is called anaerobic respiration. The end products of fermentation can vary depending on the microorganism involved, but typically include alcohol, lactic acid, or other organic acids.

Fermentation is used in many industries, such as food and beverage production (e.g. beer, wine, bread, yogurt, and cheese), pharmaceuticals, and biofuels. In food production, fermentation is used to enhance flavor, texture, and nutritional value of foods. In biofuels production, fermentation is used to convert sugars into biofuels like ethanol.

Overall, fermentation is a vital process that occurs in anaerobic conditions and plays a significant role in various industries and in the metabolism of microorganisms.

Learn more about fermentation here:

https://brainly.com/question/490148

#SPJ1

The coefficient that goes in front of the ECA in the chemical reaction given above is 2.

It has been indicated that coefficient in a chemical reaction is a number that goes in front of an element or compound in a balanced equation. The unbalanced chemical equation for the given reaction is:

[tex]E_{3} BC_{4} D(CA)_{2}[/tex]  → [tex]D_{3} (BC_{4} ) ECA[/tex]

The balanced equation of the chemical reaction above is:

[tex]2E_{3} BC_{4} D(CA)_{2}[/tex]  → [tex]D_{3} (BC_{4} )_{2} ECA[/tex]

We can see that 2 comes before ECA in the balanced chemical equation above. Therefore, the coefficient that goes in front of the ECA in the chemical reaction given above is 2.

More on chemical reaction coefficient: https://brainly.com/question/31143822

#SPJ11

In this process, 149 g of Fe should theoretically be produced.

The balanced chemical equation shows that one mole of Fe2O3 reacts with three moles of C to produce two moles of Fe and three moles of CO. Therefore, the mole ratio of Fe2O3 to Fe is 1:1.

Using the given information, we know that 2.00 mol of Fe2O3 is reacted with 4.00 mol of C. We can determine the limiting reactant by comparing the mole ratios of Fe2O3 and C required for the reaction. Since Fe2O3 and C have a mole ratio of 1:3 in the balanced equation, we can see that only 1.33 mol of C (4.00 mol/3) is required to react with 2.00 mol of Fe2O3. Therefore, C is the limiting reactant.

To determine the theoretical yield of Fe, we need to first calculate the amount of Fe that can be produced from 4.00 mol of C. Using the mole ratio of Fe to C in the balanced equation, we can see that 4.00 mol of C can produce:

2 mol Fe / 3 mol C x 4.00 mol C = 2.67 mol Fe

Finally, we can calculate the theoretical yield of Fe by multiplying the amount of Fe that can be produced (2.67 mol) by its molar mass (55.85 g/mol):

Theoretical yield of Fe = 2.67 mol x 55.85 g/mol = 149 g

Therefore, the theoretical yield of Fe in this reaction is 149 g.

To learn more about  balanced equation  refer to:

brainly.com/question/30313275

#SPJ4

Answer:

The organism that provides energy to all other organisms in an ecosystem is usually a primary producer, which is an organism that produces its own food through photosynthesis or chemosynthesis. In this ecosystem, the primary producer is likely the prairie grass, as it converts sunlight into energy through photosynthesis and is the basis of the food chain. The other organisms listed (coyote, vulture, prairie dog) are consumers and obtain their energy by eating other organisms, either directly or indirectly.

(please could you kindly mark my answer as brainliest )

Answer :  A. Propagation step requires more energy : Chlorination reaction, B. Enthalpy of the reaction is endothermic :  Bromination reaction, C. Halogenation yields more than one major product : Chlorination reaction, D) Carbon-halogen bond dissociation energy is higher : Bromination reaction, E. The enthalpy of the reaction is exothermic : Bromination reaction, F. The halogenation is selective : Chlorination reaction

Propagation step requires more energy - This statement is describing a chlorination reaction because in a chlorination reaction, the propagation step (adding a chlorine atom to the reactant) requires more energy than the initiation step. B. Enthalpy of the reaction is endothermic - This statement is describing a bromination reaction because in a bromination reaction, the reaction enthalpy is endothermic.

This statement is describing a chlorination reaction. This statement is describing a bromination reaction because in a bromination reaction, the carbon-halogen bond dissociation energy is higher than in a chlorination reaction. This statement is describing a bromination reaction because in a bromination reaction, the reaction enthalpy is exothermic.

Know more about endothermic here:

https://brainly.com/question/23184814

#SPJ11

Answer:

To prepare a 1.00 mol dm^-3 sodium chloride solution, we need to dissolve one mole of sodium chloride in one liter of solution (1000 cm^3).

However, we only need to prepare 100 cm^3 of the solution, which is 1/10 of a liter. So we need to dissolve:

1/10 * 1.00 mol = 0.100 mol

of sodium chloride in 100 cm^3 of solution.

The molar mass of sodium chloride is 58.5 g/mol. So to calculate the mass of sodium chloride required, we can use:

mass = number of moles x molar mass

mass = 0.100 mol x 58.5 g/mol

mass = 5.85 g

Therefore, we need 5.85 g of sodium chloride to prepare 100 cm^3 of 1.00 mol dm^-3 sodium chloride solution.

a) difluoroacetic acid: most acidic fluoroacetic acid: least acidic  trifluoroacetic acid : middle acidity. b) cyclohexanol: least acidic phenol: middle acidity benzoic acid: most acidic. c) oxalic acid: most acidic acetic acid: middle acidity formic acid: least acidic. Thus, the most acidic and least acidic compound in each set is identified as given above.

In the given question, we are given sets of compounds and we have to identify the most and the least acidic compound in each set. The acidic character of the compound depends upon its tendency to donate hydrogen ion. The compound that easily donates hydrogen ion is acidic in nature, while the compound that does not donate hydrogen ion easily is basic in nature.

The compound that donates hydrogen ion in a moderate way is neutral in nature.a) difluoroacetic acid: most acidic fluoroacetic acid: least acidic trifluoroacetic acid: middle acidity b) cyclohexanol: least acidic phenol: middle aciditybenzoic acid: most acidic.

Know more about cyclohexanol here:

https://brainly.com/question/7141113

#SPJ11

Testing more samples from each location would improve the reliability of the engineers' measurements.

The correct option is D

By increasing the number of samples tested, the engineers can obtain a more accurate representation of the porosity of the material in question. This can help to account for any variation or outliers in the data, which can improve the reliability of the results. Using a different liquid or different containers may affect the results but may not necessarily improve reliability. Testing single samples from more than three locations may provide more information but may not necessarily improve reliability if the samples are not representative of the overall population.

To know more about reliability click here:

brainly.com/question/30154360

#SPJ4

The maximum temperature change for a solution of the salicylic acid compound in ethanol is about 0.002292°C.

To calculate the maximum temperature change for a solution of salicylic acid in ethanol, you need to use the boiling point elevation equation:

ΔT = Kb × m

where, Kb is the molal boiling point elevation constant, and m is the molality of the solution. The molality of the solution can be calculated using the following equation:

m = (mass of solute (g))/(1000 × molal mass (g/mol)*density of the solvent (g/mL))

Therefore, for the given equation:

m = (0.370 g)/(1000 × 137.1 g/mol × 0.789 g/mL) = 0.002181 mol/kg

ΔT = Kb × m = 1.07 c/m × 0.002181 mol/kg = 0.002292°C

Therefore, the maximum temperature change for a solution of salicylic acid in ethanol is 0.002292°C.

Learn more about Salicylic acid here:

https://brainly.com/question/14635153

#SPJ11