Answers
Answer:
3 > 2> 1
Explanation:
Aromatic compounds undergo electrophilic substitution reaction which passes through a positively charged intermediate to yield the product.
Substituted benzenes may be more or less reactive towards electrophilic aromatic substitution than benzene molecule depending on the nature of the substituent.
Certain substituents increase the ease of reaction of benzene towards aromatic substitution.
If we look at the compounds closely, we will notice that toluene reacts readily with CH3Cl / AlCl3. This is because, the methyl group is electron donating hence it stabilizes the positively charged intermediate produced in the reaction.
Carbonyl compounds are electron withdrawing substituents hence they decrease the magnitude of the positive charge and hence decrease the rate of electrophilic aromatic substitution.
Related Questions
Answer the following questions: (Questions about titration)
a. Why is it important to keep the NaOH solution covered at all times?
b. How will the molarity of NaOH solution be affected by its continued exposure to the atmosphere?
c. The pale pink color of the titration solution at the end point will fade to colorless after several minutes when exposed to the atmosphere. Account for this color change.
d. What volume (in mL) of 0.293 M Ba(OH)2 is required to neutralize 25.00 mL of 0.200M HNO3?
Answers
Answer:
Following are the solution to the given question:
Explanation:
For question a:
It is prevented that the atmospheric [tex]CO_2[/tex] through dissolving in the solution and make carbonic acid [tex](H_2CO_3)[/tex] which reacts with the [tex]NaOH:[/tex]
[tex]CO_2+ H_20\to H_2CO_3\\\\H_2CO_3 + NaOH \to NaHCO_3 +H_2O\\\\H_2CO_3 + 2 NaOH \to Na_2CO_3 + 2H_2O\\\\[/tex]
For question b:
For this, the [tex]NaOH[/tex] reacts with the dissolved [tex]CO_2[/tex] so, the molarity of the [tex]NaOH[/tex] will be decreased.
For question C:
In this, the Phenolphthalein is pink in the basic solution[tex](high \ pH)[/tex] and colorless throughout the acidic solution[tex](low\ pH)[/tex].
if the solution is exposed from the atmosphere, the [tex]CO_2[/tex] is from the air dissolving in the solution, and making the [tex]H_2CO_3[/tex] that gives the [tex]H^{+}\ ions[/tex]
[tex]\to[/tex] lower pH.
[tex]\to[/tex] colorless phenolphthalein
For question D:
[tex]Ba(OH)_2 + 2 HNO_3 \to Ba(NO_3)_2+ 2H_2O\\\\[/tex]
Calculating the moles of[tex]HNO_3 = volume \times \text{concentration of} HNO_3\\\\[/tex]
[tex]= \frac{25}{1000} \times 0.200\\\\= 0.005\ mol\\\\[/tex]
Calculating the moles of [tex]Ba(OH)_2= \frac{1}{2} \times\text{moles of}\ HNO_3\\\\[/tex]
[tex]=\frac{1}{2} \times 0.005\\\\= 0.0025 \ mol\\\\[/tex]
Calculating the volume of [tex]Ba(OH)_2=\frac{moles}{concentration\ of\ Ba(OH)_2}[/tex]
[tex]=\frac{0.0025}{0.0293}\\\\=0.08532\ L\\\\= 85.32 \ mL\\\\= 85.3\ mL[/tex]
Nitrogen and hydrogen react to form ammonia, like this:N2(g)+3H2(g)→2NH3(g)Use this chemical equation to answer the questions below.Suppose 135, mmol of N₂ and 405, mmol of H₂ are added to an empty flask, How much N₂ will be in the flask at equilibrium? a. Noneb. Some, but less than 135, mmol.c. 135,mmold. More than 135, mmol.Suppose 235, mmol of NH₃ are added to an empty flask, How much N₂ will be in the flask at equilibrium? a. Noneb. Some, but less than 118, mmol.c. 118,mmold. More than 118, mmol.
Answers
Answer:
Option A is correct, there will be no N2 left in the flask
Explanation:
Step 1 : Data given
Number of moles of N2 = 135 mmol = 0.135 mol
Number of moles of H2 = 405 mmol = 0.405 mol
Step 2: The reaction
N2(g)+3H2(g)→2NH3(g)
Step 3:
For 1 mol N2 we need 3 moles H2 to produce 2 moles NH3
Both will completely react. There is no limiting reactant.
There will be produce 0.270 moles NH3.
Option A is correct, there will be no N2 left in the flask
Classify each of the following as a strong acid or a weak acid and indicate how each should be written in aqueous solution. Classify ... In solution this acid should be written as: weak 1. hydrocyanic acid H3O CN- _______ 2. hydrobromic acid
Answers
Answer:
HCN, weak acid
H⁺, Br⁻, strong acid
Explanation:
Hydrocyanic acid is a weak acid, according to the following equation.
HCN(aq) ⇄ H⁺(aq) + CN⁻(aq)
Thus, it should be written in the undissociated form (HCN).
Hydrobromic acid is a strong acid, according to the following equation.
HBr(aq) ⇒ H⁺(aq) + Br⁻(aq)
Thus, it should be written in the ionic form (H⁺, Br⁻).
Identify the type of reaction in the chemical reaction below:
2 P205 - 4P + 5 02
single replacement
synthesis
decomposition
combustion
double replacement
Answers
Complete question is;
Identify the type of reaction in the chemical reaction below:
2P205 ➡️ 4P + 502
single replacement
synthesis
decomposition
combustion
double replacement
Answer:
Decomposition
Explanation:
We. An see in the question that the compound 2P205 is broken down into simpler substances which are phosphorus (P) and oxygen (O).
Now, this is a decomposition reaction because a decomposition reaction is one in which a compound is broken down into simpler substances
1. A positive value for AH for a chemical reaction is an indication of which of the following?
A. Reactants have higher potential energy and the reaction is endothermic.
B. Reactants have higher potential energy, and the reaction is exothermic.
C. Products have higher potential energy, and the reaction is endothermic.
D. Products have higher potential energy, and the reaction is exothermic.
Answers
Answer:
C. Products have higher potential energy, and the reaction is endothermic.
Vocabulary: dipole, dipole-dipole force, dipole-induced dipole force, electronegativity, intermolecular force, ionic bond, London dispersion force, molecule, nonpolar, nonpolar covalent bond, partial charges, polar, polar covalent bond, valence electron Prior Knowledge Questions (Do these BEFORE using the Gizmo.) 1. A big bully is having a tug-of-war with a small child. There is a ball attached to the middle of the rope. Toward whom will the ball move
Answers
Answer:
Towards the big bully
Explanation:
If a big bully and a small child are involved in a thug of war, it is clear that the bully is stronger than the child and he/she will pull the rope used in the thug of war with a greater force.
By so doing, the ball attached at the centre of the rope will naturally be drawn towards the stronger bully.
In a closed system, If a gas is transported to a container with double the volume of the previous container, the gas was held in, what is the gases' new volume?
The volume of the gas is fixed and will not change.
The volume of the gas will be half the original volume.
The volume of the gas will be the original volume squared.
The volume of the gas will be double the original volume.
Answers
Answer:
The volume of the gas is fixed and will not change.
Explanation:
The volume of the gas will not change because there is no change in temperature. Temperature increases the volume of gases enclosed in a container.
Question 2: Functional Groups (6 points)
A. Methanoic acid is the simplest carboxylic acid molecule. It has one carbon atom. Draw the structural model for methanoic acid (using C and H). (3 points)
B. Methanal is the simplest aldehyde, with one carbon atom. Draw the structural model for methanal (using C and H). (3 points)
Answers
name this organic compound
I don't need explaination just give the name
Answers
Answer:
Toluene
Explanation:
This compound is called toluene.
It is a phenyl group where it is bonded a methyl.
It is an aromatic compound.
IUPAC name can be, Methylbenzene.
As an organic compound it can not be dissolved in water.
This can be a reaction of synthesis:
C₆H₅H + CH₃Cl → C₆H₅CH₃ + HCl
Cis-4-tertButylcyclohexyl bromide (compound 1) and Trans-4 tert Butylcyclohexylbromide (compound 2) are reacted with Potassium Tertiary butoxide in Tertiary butanol to produce 4-tertbutylcyclohexene. The following statement is completely true?A. In compound 1 the Tert butyl group occupies the equatorial position and the Bromine occupies the axial position and in compound 2 both the Tert butyl and the bromine occupy equatorial positions. Compound 1 reacts faster than compound 2.
B. In compound 1 the Tert butyl group occupies the axial position and the Bromine occupies the axial position and in compound 2 both the Tert butyl and the bromine occupy equatorial positions. Compound 1 reacts faster than compound 2.
C. In compound 1 the Tert butyl group occupies the equatorial position and the Bromine occupies the equatorial position and in compound 2 both the Tert butyl and the bromine occupy equatorial positions. Compound 1 reacts faster than compound 2.
D. In compound 1 the Tert butyl group occupies the equatorial position and the Bromine occupies the axial position and in compound 2 the Tert butyl occupies the axial and the bromine occupies equatorial positions. Compound 1 reacts faster than compound 2.
E. In compound 1 the Tert butyl group occupies the equatorial position and the Bromine occupies the axial position and in compound 2 both the Tert butyl occupies the equatorial and the bromine occupies axial position. Compound 1 reacts faster than compound 2.
F. In compound 1 the Tert butyl group occupies the equatorial position and the Bromine occupies the axial position and in compound 2 both the Tert butyl and the bromine occupy equatorial positions. Compond 2 reacts faster than compound 1.
Answers
Answer:
In compound 1 the Tert butyl group occupies the equatorial position and the Bromine occupies the axial position and in compound 2 the Tert butyl occupies the axial and the bromine occupies equatorial positions. Compound 1 reacts faster than compound 2.
Explanation:
In cyclic organic compounds, substituents may occupy the axial or equatorial positions. The axial positions are aligned parallel to the symmetry axis of the ring while the equatorial positions are around the plane of the ring.
Bulky substituents have more room in the equatorial than in the axial position. This means that compound 1 is more stable than compound 2.
This is clear on the basis of stability of the molecules because compound 1 will react faster than compound 2 since the bulky tertiary butyl group in compound 1 occupy equatorial and not axial positions.
3. A 3.455-g sample of a mixture was analyzed for barium ion by adding a small excess of sulfuric acid to an aqueous solution of the sample. The resultant reaction produced a precipitate of barium sulfate, which was collected by filtration, washed, dried, and weighed. If 0.2815 g of barium sulfate was obtained, what was the mass percentage of barium in the sample
Answers
Answer:
[tex]Ba\ percentage\ in\ Mass=4.8\%[/tex]
Explanation:
From the question we are told that:
Mass of mixture [tex]m=3.455g[/tex]
Mass of Barium [tex]m_b=0.2815g[/tex]
Equation of Reaction is given as
[tex]Ba2+ + H2SO4 => BaSO4 + 2 H+[/tex]
Generally the equation for Moles of Barium is mathematically given by
Since
[tex]Moles of Ba^{2+} = Moles of BaSO_4[/tex]
Therefore
[tex]Moles of Ba^{2+} = \frac{mass}{molar mass of BaSO4}[/tex]
[tex]Moles of Ba^{2+} = \frac{0.2815}{233.39}= 0.0012061 mol[/tex]
Generally the equation for Mass of Barium is mathematically given by
[tex]Mass\ of\ Ba^{2+} = Moles * Molar mass of Ba^{2+}[/tex]
[tex]Mass\ of\ Ba^{2+} = 0.0012061 * 137.33 = 0.1656 g[/tex]
Therefore
[tex]Ba\ percentage\ in\ Mass = mass of Ba^{2+}/mass of sample * 100%[/tex]
[tex]Ba\ percentage\ in\ Mass= \frac{0.1656}{ 3.455 }* 100%[/tex]
[tex]Ba\ percentage\ in\ Mass=4.8\%[/tex]
How do forces between particles in gases compare to forces in the other states of matter?
Answers
The forces in gases are weaker than forces in solids and liquids.
Because they have more kinetic energy that overcomes the force of attraction.
In the reactionpyruvate lactatethat is catalyzed by the enzyme lactate dehydrogenase, the compound on which the enzyme works, pyruvate, is called the _______.
Answers
Answer:
Substrate
Explanation:
In biochemical sciences, a substrate is a substance that is acted upon by an enzyme to yield a product. Enzymes are known for catalyzing biochemical reactions. The substances that are usually worked with during this catalytic process are termed as SUBSTRATES.
Substrates, which are usually changed during the process, binds to the active site on the enzyme and form an enzyme-substrate complex.
According to this question, pyruvate is converted to lactate in a reaction that is catalyzed by the enzyme lactate dehydrogenase. This means that the compound on which the enzyme works, pyruvate, is called the SUBSTRATE.
My question today is : The reaction of 11.9g go CHCl3 with excess chlorine produced 10.2g of CCl4, carbon tetrachloride. What is the percent yield
Answers
Answer:
66.7%
Explanation:
Step 1: Write the balanced equation
CHCl₃ + Cl₂ ⇒ CCl₄ + HCl
Step 2: Calculate the theoretical yield of CCl₄ from 11.9 g of CHCl₃
According to the balanced equation, the mass ratio of CHCl₃ to CCl₄ is 119.38:153.82.
11.9 g CHCl₃ × 153.82 g CCl₄/119.38 g CHCl₃ = 15.3 g CCl₄
Step 3: Calculate the percent yield of CCl₄
Given the experimental yield of CCl₄ is 10.2 g, we can calculate the percent yield using the following expression.
%yield = (exp yield/theo yield) × 100%
%yield = (10.2 g/15.3 g) × 100% = 66.7%
20. What intermolecular forces would affect the interactions of water molecules? Explain why.
Answers
Answer:
Water has strong hydrogen bond dipole-dipole intermolecular forces that give water a high surface tension and a high heat of vaporization and that make it a strong solvent
g Elimination reaction simulation, Kim had tried to prepare cyclohexene from cyclohexanol using HCl as a catalyst, but he got a weird side product cyclohexyl chloride. Cyclohexyl chloride is formed possibly from the side reaction called A. SN1 substitution reaction B. E2 reaction C. E1 reaction D. SN2 substitution reaction
Answers
Answer:
SN1 substitution reaction
Explanation:
cyclohexanol is a secondary alkanol. The mechanism of acid catalysed dehydration of cyclohexanol involves the protonation of the -OH group.
This is followed by loss of water which is a good leaving group. At this stage, a proton could be abstracted to yield cyclohexene by E1 mechanism or an SN1 substitution reaction may occur to yield Cyclohexyl chloride.
The both reactions are equally likely.
4. Draw conclusions: How is the periodic table organized?
Answers
Answer:
.
Elements are arranged from left to right and top to bottom in the order of their increasing atomic numbers. Thus,
Elements in the same group will have the same valence electron configuration and hence, similar chemical properties.
Whereas, elements in the same period will have an increasing order of valence electrons. Therefore, as the energy level of the atom increases, the number of energy sub-levels per energy level increases.
The first 94 elements of the periodic table are naturally occurring, while the rest from 95 to 118 have only been synthesized in laboratories or nuclear reactors.
The modern periodic table, the one we use now, is a new and improved version of certain models put forth by scientists in the 19th and 20th century. Dimitri Mendeleev put forward his periodic table based on the findings of some scientists before him like John Newlands and Antoine-Laurent de Lavoisier. However, Mendeleev is given sole credit for his development of the periodic table.
Para formar bronce, se mezclan 150g de cobre a 1100°C y 35g de estaño a 560°C. Determine la temperatura final del sistema.
Dato: Ce Cu: 0,093 cal/gºC; Ce Sn: 0,060 cal/gºC
URGENTEEEE
Answers
Answer:
La temperatura final del sistema es 1029,346 °C.
Explanation:
Asumamos que el sistema conformado por el cobre y el estaño no tiene interacciones con sus alrededores. Por la Primera Ley de la Termodinámica, el cobre cede calor al estaño con tal de alcanzar el equilibrio térmico. El cobre se encuentra inicialmente en su punto de fusión, mientras que el estaño está por encima de ese punto, de modo que la transferencia de calor es esencialmente sensible:
[tex]m_{Cu}\cdot c_{Cu}\cdot (T-T_{Cu}) = m_{Sn}\cdot c_{Sn}\cdot (T_{Sn}-T)[/tex]
[tex](m_{Cu}\cdot c_{Cu} + m_{Sn}\cdot c_{Sn})\cdot T = m_{Sn}\cdot c_{Sn}\cdot T_{Sn} + m_{Cu}\cdot c_{Cu}\cdot T_{Cu}[/tex]
[tex]T = \frac{m_{Sn}\cdot c_{Sn}\cdot T_{Sn}+m_{Cu}\cdot c_{Cu}\cdot T_{Cu}}{m_{Cu}\cdot c_{Cu}+m_{Sn}\cdot c_{Sn}}[/tex] (1)
Donde:
[tex]m_{Sn}[/tex] - Masa del estaño, en gramos.
[tex]m_{Cu}[/tex] - Masa del cobre, en gramos.
[tex]c_{Sn}[/tex] - Calor específico del estaño, en calorías por gramo-grados Celsius.
[tex]c_{Cu}[/tex] - Calor específico del cobre, en calorías por gramo-grados Celsius.
[tex]T_{Sn}[/tex] - Temperatura inicial del estaño, en grados Celsius.
[tex]T_{Cu}[/tex] - Temperatura inicial del cobre, en grados Celsius.
Si sabemos que [tex]m_{Cu} = 150\,g[/tex], [tex]m_{Sn} = 35\,g[/tex], [tex]c_{Cu} = 0,093\,\frac{cal}{g\cdot ^{\circ}C}[/tex], [tex]c_{Sn} = 0,060\,\frac{cal}{g\cdot ^{\circ}C}[/tex], [tex]T_{Sn} = 560\,^{\circ}C[/tex] y [tex]T_{Cu} = 1100\,^{\circ}C[/tex], entonces la temperatura final del sistema es:
[tex]T = \frac{(35\,g)\cdot \left(0,060\,\frac{cal}{g\cdot ^{\circ}C} \right)\cdot (560\,^{\circ}C)+(150\,g)\cdot \left(0,093\,\frac{cal}{g\cdot ^{\circ}C} \right)\cdot (1100\,^{\circ}C)}{(35\,g)\cdot \left(0,060\,\frac{cal}{g\cdot ^{\circ}C} \right)+(150\,g)\cdot \left(0,093\,\frac{cal}{g\cdot ^{\circ}C} \right)}[/tex]
[tex]T = 1029,346\,^{\circ}C[/tex]
La temperatura final del sistema es 1029,346 °C.
Zn-64 = 48.63%
Zn-66 = 27.90%
Zn-67 = 4.10%
Zn-68 = 18.75%
Zn-70 = .62%
Calculate the average atomic mass/given their percent abundance
Answers
Answer:
A = 65.46 u
Explanation:
Given that,
The composition of zinc is as follows :
Zn-64 = 48.63%
Zn-66 = 27.90%
Zn-67 = 4.10%
Zn-68 = 18.75%
Zn-70 = .62%
We need to find the average atomic mass of the given element. It can be solved as follows :
[tex]A=\dfrac{48.63\times 64+27.90\times 66+4.1\times 67+18.75\times 68+0.62\times 70}{100}\\A=65.46\ u[/tex]
So, the average atomic mass of zinc is 65.46 u.
Fill in the blanks with each titration term with its definition.
a. Solution of an unknown concentration that has another solution slowly added to it ________________
b. Process of slowly adding a solution to react with another solution and determine the concentration of one of the solutions based on the reaction between them ______________
c. A reagent added to the analyte solution that changes color when the reaction is complete ______________
d. Glassware that allows a solution to be precisely and slowly added to another solution _____________
e. Solution of known concentration that is slowly added to a solution of unknown concentration ________________
f. When the required amount of one solution has been added to the second solution to complete the reaction ____________
Answers
Answer:
Fill in the blanks with each titration term with its definition.
a. Solution of an unknown concentration that has another solution slowly added to it ________________
b. Process of slowly adding a solution to react with another solution and determine the concentration of one of the solutions based on the reaction between them ______________
c. A reagent added to the analyte solution that changes color when the reaction is complete ______________
d. Glassware that allows a solution to be precisely and slowly added to another solution _____________
e. Solution of known concentration that is slowly added to a solution of unknown concentration ________________
f. When the required amount of one solution has been added to the second solution to complete the reaction ____________
Explanation:
a. Solution of an unknown concentration that has another solution slowly added to it is called analyte.
b. Process of slowly adding a solution to react with another solution and determine the concentration of one of the solutions based on the reaction between them is called titration.
c. A reagent added to the analyte solution that changes color when the reaction is complete is called an indicator.
d. Glassware that allows a solution to be precisely and slowly added to another solution is called a pipette.
e. Solution of known concentration that is slowly added to a solution of unknown concentration is called titrant.
f. When the required amount of one solution has been added to the second solution to complete the reaction is called neutralization.
Question 4 of 30
Scientific research shows that Earth's climate is changing due to human
activities. How can scientific research on climate change help society?
A. It can help us stop storms before they occur.
B. It can help us find a new way to make more water.
C. It can help us track how quickly elements of the climate are
changing
D. It can help us reverse the effects of climate change.
th
Answers
C. It can help us track how quickly element of the climate are changing
2. What is the conductivity of lead as compared to silver?
O A. 7
OB. 15
O C. 30
O D. 61
Answers
Many home barbeques are fueled with propane gas (C3H8)(C3H8). Part A What mass of carbon dioxide is produced upon the complete combustion of 27.9 LL of propane (the approximate contents of one 5-gallon tank)
Answers
Answer:
41264 g of CO₂
Explanation:
Combustion reaction is:
C₃H₈ + 5O₂ → 3CO₂ + 4H₂O
1 mol of propane react to 5 moles of oxygen in order to proudce 3 moles of carbon dioxide and 4 moles of water.
In a combustion reaction, our reactant reacts to oxygen and the products are always CO₂ and water.
We have the volume of propane but we need moles of it, so we need to apply density.
Density = mass / volume so mass = density . volume.
Density of propane is: 493 g/L
Mass of propane is 493 g/L . 27.9L = 13754.7 g
We convert mass to moles: 13754.7 g . 1 mol/ 44g = 312.6 moles
According to reaction, 1 mol of propane can produce 3 moles of CO₂
Our 312.6 moles will produce 312.6 . 3 = 937.8 moles
We convert moles to mass: 937.8 mol . 44 g/mol = 41264 g
Draw bond-line formulas of all monochloro derivatives that might be formed when 1,1-dimethylcyclobutane is allowed to react with Cl2 under UV irradiation. For each structure, indicate, with an asterisk, any stereocenters that might be present.
Answers
Answer:
Attached below
Explanation:
Diagram of Bond-line formulas of all monochloro derivatives formed when 1,1-dimethylcyclobutane is allowed to react with c12 under UV
attached below
Explain how Green Chemistry Principles can be applied to one of these five topics:
Radioactive Waste
Peak Power: Demand
Safety
Security (Weapons Proliferation and Physical Protection)
High Power-Plant Costs
You may use the "Online Librarian" to assist in your research.
This assignment must be a minimum of 500 words double spaced. Once you’ve completed your paper you will turn it into a Brainfuse Writing to critique it and then to me for final grading.
Answers
Answer:
Principles of green chemistry:
• Prevent wastes rather than treat them.
• Incorporates all raw materials into the final product.
• Use of synthetic methods.
• To design chemical products to reduce toxicity.
• Use of energy-efficient processes.
• Use of renewable raw materials.
• Reuse chemical intermediates to reduce waste.
• Improve health and safety for staff and customers.
• Cleaner production technologies.
Green chemistry principles can be applied to radioactive wastes by:
• We should choose reagents and procedures that lessen the toxicity and volume of all the wastes. We need to design experiments that radioactive wastes that are produced separately from biologically or chemically hazardous wastes if flexible.
• Substitutes with short-lived radionuclides were feasible.
• Reduce the activity and volumes of wastes generated.
• Limit the number of users of radioactive materials.
• Replace hazardous or mixed wastes.
• Non-radioactive wastes will not be mixed with radioactive wastes. If it is not done then the volume of wastes increases.
determine the number of moles of Cl in 1.9 mol of CaCl2
Answers
Explanation:
In the formula of [tex]CaCl_2[/tex] we can see that there are 2mol Cl in 1 molecule of CaCl2. So, now we can do some math to find out how many mol of Cl there are in 1.9mol CaCl2!
[tex]1.9molCaCl_2*\frac{2molCl}{1molCaCl_2}[/tex]
So, there are 3.8mol Cl
Describe how you would prepare your assigned ester from a carboxylic acid and an alcohol. You do not need to include a detailed procedure, but you should include any necessary reagents or catalyst (solvents are not needed).
Answers
Answer:
The general preparation of esters( for example ethyl ethanoate) is through a process known as ESTERIFICATION.
Explanation:
The formation of an ester by the reaction between an alkanol and an acid is known as esterification. This reaction is extremely slow and reversible at room temperature, and is catalyzed by a high concentration of hydrogen ions.
In the preparation of one of the simpler esters known as ETHYL ETHANOATE the reactants include ethanol(an alcohol) and glacial ethanoic acid(a carboxylic acid) in the presence of concentrated tetraoxosulphate VI acid as a CATALYST. Note that, a catalyst is any substance that is able to increase the rate of a chemical reaction.
The mixture is warmed in a water bath( hot but not boiling) for about 25 minutes. The mixture is poured into a beaker partially filled with a sodium or calcium chloride to remove interacted ethanol. The ethyl ETHANOATE floats on the mixture as oily globules.
A soluble unknown has contaminated your sample. It absorbs the same wavelength as your analyte, Allura Red dye. How will this affect your results, and what type of error is introduced
Answers
Answer:
The explanation as per the given query is presented in the following paragraph.
Explanation:
The Allura Reds Pigment or coloring increases the absorption by absorbing at around a very similar wavelength as that of the analysis.Therefore, the approximated analysis concentration or its intensity seemed substantially higher than that of the authentic one. Some positive mistake is going to exist.Thus the above is the correct explanation.
The measured absorbance will be higher, thereby creating systematic error.
Absorbance can be defined as the value or quantity of light absorbed by a given sample.The presence of impurity with a similar absorption wavelength will increase the absorbance. Moreover, systematic error is a type of error that is repeated along with different processes of measurement.In conclusion, the measured absorbance will be higher, thereby creating systematic error.
Learn more in:
https://brainly.com/question/14919298
How do I solve this?
Answers
Explanation:
a) Since this is a double displacement reaction, we write the balanced equation as
[tex]2AgNO_3(aq) + CaCl_2(aq) \\ \rightarrow 2AgCl(s) + Ca(NO_3)_2(aq)[/tex]
b) Next we find the number of moles of AgNO3 in the solution.
[tex](0.005\:\text{L})(0.500\:M\:AgNO_3) \\ = 0.0025\:\text{mol}\:AgNO_3[/tex]
Next, use the molar ratio to find the necessary amount of CaCl2 to react with the AgNO3:
[tex]0.0025\:\text{mol}\:AgNO_3× \left(\dfrac{1\:\text{mol}\:CaCl_2}{2\:\text{mol}\:AgNO_3} \right)[/tex]
[tex]= 0.00125\:\text{mol}\:CaCl_2[/tex]
The volume of 0.500 M solution of CaCl2 necessary to react all of the given AgNO_3 is then
[tex]V = \dfrac{0.00125\:\text{mol}\:CaCl_2}{0.500\:\text{M}\:CaCl_2}[/tex]
[tex]= 0.0025\:\text{L} = 2.5\:\text{mL}\:CaCl_2[/tex]
c) The theoretical yield can then be calculated as
[tex]0.0025\:\text{mol}\:AgNO_3 × \left(\dfrac{2\:\text{mol}\:AgCl}{2\:\text{mol}\:AgNO_3} \right)[/tex]
[tex]= 0.0025\:\text{mol}\:AgCl[/tex]
Converting this amount of AgCl into grams, we get
[tex]0.0025\:\text{mol}\:AgCl × \left(\dfrac{143.32\:\text{g}\:AgCl}{1\:\text{mol}\:AgCl} \right)[/tex]
[tex]= 0.358\:\text{g}\:AgCl[/tex]
1. Calculate the percent recovery of benzoic acid, naphthalene and 3-nitroaniline if you were able to collect 10.75 g of benzoic acid, 5.41 g of naphthalene, and 7.81 g of 3-nitroaniline from a set of extractions. The starting mass of the mixture was 25.04 g. (0.6 pt) 2. Describe why it is important to use sodium hydroxide and hydrochloride acid in this experiment. Why was it necessary to initially start off with a 5% solution of the acid or base for this experiment
Answers
Explanation:
1.)
mass = 25.04
percentage recovery
[tex]benzoic acid = \frac{10.75}{25.04} = 0.4293*100 = 42.93%\\[/tex]
[tex]naphtalene =\frac{5.41}{25.04} = 0.2160*100 = 21.60\\3-nitroaniline=\frac{7.81}{25.04} =0.3119*100=31.19[/tex]
2. This experiment has these compounds, benzoic acid (which is an acid), naphthalene (this is neutral) and 3-nitroaniline (this is a base).
to extract, 5 percent of NaOH has to be used in order for benzoic acid to become with sodium hydroxide. the salt would then dissolve in H2O, the other two remaining are going to dissolve in organic layer. and this would make benzoic acid to leave the mix.
we make use of 5 percent of HCl so that the 3-nitroaniline will turn into ammonium salt with the hcl, then the ammonium salt would dissolve in water and naphtalene would become soluble in organic layer. when this happens we would then have the three compounds separated.
