fundamental questions early astronomers tried to answer were: 1) what is the shape and size of earth? 2) what are the distances from earth to the sun and moon? and 3) blank ?

Answers

Answer 1

The third fundamental question early astronomers tried to answer was: What are the motions of the planets and stars in the night sky?

The shape of the Earth is an oblate spheroid, and its approximate diameter is 12,742 km. The average distance from Earth to the Sun is 149,598,262 km, and the average distance from Earth to the Moon is 384,400 km. 3) What are the motions of the planets? The motions of the planets were observed by ASTRONOMES to be elliptical, with the Sun at one focus.
Early astronomers were curious to understand the shape and size of Earth, as well as the distances from Earth to the Sun and Moon. Additionally, they were interested in determining the motions of the planets and stars in the night sky.
The ancient Greeks believed that the universe was a series of concentric spheres with the Earth in the center. Aristotle, a Greek philosopher, believed that the Earth was at the center of the universe, and that everything else, including the stars and planets, orbited around it. The Greek philosopher Eratosthenes was the first to calculate the Earth's circumference. He did so by measuring the angle of the sun's rays at noon on the summer solstice at two different locations and using the difference to estimate the distance between the two places.

In conclusion, early astronomers attempted to answer fundamental questions regarding the shape and size of Earth, the distances from Earth to the sun and moon, and the motion of stars and planets in the sky .

To know more about Motion please visit :

https://brainly.com/question/28205978

#SPJ11


Related Questions

a microwave oven operates at 2.90 ghz . what is the wavelength of the radiation produced by this appliance?

Answers

The given frequency of a microwave oven is 2.90 GHz. We have to find the wavelength of the radiation produced by this appliance. The speed of light is a constant value of 3 x 108 m/s. The relation between frequency and wavelength of electromagnetic radiation is given by:

c = fλ

Where,

c = speed of lightf = frequency of radiationλ = wavelength of radiation

We can rearrange this equation to get the formula for wavelength:

λ = c / f

Substituting the given values, we get:

λ = 3 x 108 / (2.90 x 109)λ = 0.1034 m or 10.34 cm

Therefore, the wavelength of the radiation produced by the microwave oven is 10.34 cm.

Learn more about microwave oven: https://brainly.com/question/3164926

#SPJ11

Which of the following factors does not affect the work done against gravity when a person climbs a staircase?A) the person's speedB) the height of the staircaseC) the person's massD) acceleration due to gravity

Answers

When a person climbs a staircase, the work done against gravity depends on the person's mass and the height of the staircase, but not on their speed, acceleration due to gravity, or any other factors.

How does the work done works?

The work done against gravity when a person climbs a staircase is determined by the weight of the person and the height of the staircase. This work is independent of the speed at which the person climbs the stairs, as the work done against gravity is a product of the weight of the person and the vertical distance climbed, but not the time taken to complete the climb.

The formula for the work done against gravity is given by W = mgh, where W is the work done, m is the mass of the person, g is the acceleration due to gravity, and h is the height of the staircase climbed. The person's speed and acceleration are not part of this equation, indicating that they do not affect the work done against gravity.

Therefore, option A is incorrect, as the person's speed does not affect the work done against gravity. Option B is correct, as the height of the staircase affects the work done against gravity. Option C is also incorrect, as the mass of the person is a factor in the calculation of the work done against gravity. Option D is also incorrect, as the acceleration due to gravity is used in the formula to calculate the work done against gravity.

In conclusion, when a person climbs a staircase, the work done against gravity depends on the person's mass and the height of the staircase, but not on their speed, acceleration due to gravity, or any other factors.

To know more about work visit :-

https://brainly.com/question/28356414

#SPJ1

When the price of radios decreases 5%, quantity demanded increases 5%. The price elasticity of demand for radios is ________ and total revenue from radio sales will ________.

Answers

Price elasticity of demand for radios is 1 and total revenue from radio sales will remain constant.

Price elasticity of demand is calculated as the percentage change in quantity demanded divided by the percentage change in price. Using this formula, we can calculate the price elasticity of demand for radios as follows:

Price elasticity of demand = (percentage change in quantity demanded) / (percentage change in price)

Given that when the price of radios decreases by 5%, quantity demanded increases by 5%.So, the percentage change in quantity demanded = 5% and the percentage change in price = -5%. (Because price has decreased by 5%.)Price elasticity of demand = (5% / -5%) = -1.The negative sign indicates that the demand is elastic. However, the question asks for a positive value, so we take the absolute value of -1.Price elasticity of demand = 1.

Therefore, the price elasticity of demand for radios is 1.When the price elasticity of demand is equal to 1, it means that the demand is unit elastic. This implies that the percentage change in quantity demanded is equal to the percentage change in price. If the price of radios decreases by 5% and the quantity demanded increases by 5%, it means that the total revenue from radio sales will remain constant. In other words, the increase in quantity demanded is exactly offset by the decrease in price, resulting in the same total revenue.

More price elasticity: https://brainly.com/question/22716533

#SPJ11

a solid plastic cylinder of radius 2.33 cm and length 6.30 cm. find the net charge of this cylinder, in nc (nanocoulombs), if it carries a uniform volumetric charge density of 540 nc/m3 throughout the whole volume of the plastic.

Answers

The net charge of a solid plastic cylinder of radius 2.33 cm and length 6.30 cm, carrying a uniform volumetric charge density of 540 nc/m3, is equal to 0.0583 nC (nanocoulombs)


To determine the net charge of a cylinder, the formula Q =ρV has to be used where Q is the net charge, ρ is the uniform volumetric charge density, and V is the volume of the cylinder.

ρ is given as 540 nc/m³.

V is calculated using the formula

V = πr²h

where r is the radius and h is the length.

π is approximated to be 3.14.  

h is given as 6.30cm

r is 2.33cm

so the calculation for V becomes;

V = πr²h

V = 3.14 x 2.33² x 6.3

V = 108.02 cm³ or 108.02 x 10⁻⁶ m³.

Substitute the values of Q and V into the equation and solve for Q:

Q = ρVQ = 540 nc/m³ x 108.02 x 10⁻⁶ m³

Q = 0.0583 nc (to 3 decimal places)

Therefore the net charge of this cylinder, in nc (nanocoulombs) is 0.0583nc.

Learn more about net charge at https://brainly.com/question/26036371

#SPJ11

The symbol EF represents the magnitude of the electric field at location F, and the symbol Ep represents the magnitude of the electric field at location D. Which of the following equations is a correct energy conservation (loop) equation for this circuit, following a path that starts at the positive end of the battery and goes clockwise? O o- 1.5 V- Ef 0.25 m ED 0.063 m - Ef 0.25 m 0+1.5 V- EF 0.25 m ED 0.063 m-Ef 0.25 m 1.5 V- EF .0.25 m 0+1.5EF 0.25 mED -0.063 mEf 0.25 m 0-1.5 VEf 0.25 m ED 0.063 mEf-0.25 m 1.5V- ED-0.063 m The symbol i represents the electron current at location F, etc. Which of the following equations is a correct charge conservation (node) equation for this circuit? Use the appropriate equation(s), plus the equation relating electron current to electric field, to solve for the factor that goes in the blank below: *ED Use the appropriate equation(s) to calculate the magnitude of ED ED Use the appropriate equation(s) to calculate the electron current at location D in the steady state: V/m

Answers

The correct energy conservation (loop) equation for this circuit is 1.5V - EF 0.25m + ED 0.063m - EF 0.25m + 1.5V - EF 0.25m + ED 0.063m - EF 0.25m + 1.5V - ED 0.063m = 0.

The correct charge conservation (node) equation is i + EF 0.25m - ED 0.063m = 0. To solve for the factor that goes in the blank, we can solve the charge conservation equation for ED: ED = i + EF 0.25m. Therefore, ED = V/m. To calculate the magnitude of ED, substitute the known values into the equation: ED = V/m = (1,5V + 0,25m . EF)/0,063m.

To calculate the electron current at location D in the steady state, substitute the known values into the charge conservation equation: i = ED - EF 0.25m = (V/m - 0.25m*EF).

Learn more about Energy conservation: brainly.com/question/31047668

#SPJ11

A sandbag is dropped from a balloon which is ascending vertically at a constant speed of 6 m/s.
If the bag is released with the same upward velocity of 6 m/s when t = 0 and hits the ground when t = 8 s, determine the speed of the bag as it hits the ground and the altitude of the balloon at this instant.

Answers

The speed of the bag as it hits the ground is -47.2 m/s and the altitude of the balloon at this instant is 245.6 m.

How to calculate the speed?


At t = 0, the sandbag is released with an upward velocity of 6 m/s. Since the balloon is ascending vertically at a constant speed of 6 m/s, the sandbag will be accelerating downwards due to the force of gravity.

Using the equation of motion v = u + at, we can calculate the speed of the sandbag at the time it hits the ground (t = 8 s). We can calculate the velocity by substituting u = 6 m/s, a = -9.8 m/s2 (acceleration due to gravity), and t = 8 s. This gives us a velocity of -47.2 m/s.

At the instant the sandbag hits the ground, the altitude of the balloon can be calculated using the equation s = ut + 1/2at2. We can calculate the altitude by substituting u = 6 m/s, a = -9.8 m/s2, and t = 8 s. This gives us an altitude of 245.6 m.

Therefore, the speed of the bag as it hits the ground is -47.2 m/s and the altitude of the balloon at this instant is 245.6 m.

To learn more about speed follow

https://brainly.com/question/14691279

#SPJ11

imagine swinging a ball in a circle at the end of a string. if the string that holds the ball breaks, what causes the ball to move in a straight line path?

Answers

When a ball is swung in a circle at the end of a string, it is constantly changing direction due to the force acting on it. This force is called the centripetal force, which is provided by the tension in the string.

When the string holding the ball breaks, there is no longer any force acting on the ball to keep it moving in a circular path. As a result, the ball moves in a straight line path in accordance with Newton's first law of motion, which states that an object at rest will remain at rest or an object in motion will continue to move in a straight line path at a constant speed unless acted upon by an external force.

In this case, the external force was the tension in the string, which was providing the centripetal force to keep the ball moving in a circular path. Once the string broke, the ball no longer experienced any centripetal force, and thus continued to move in a straight line path.

To learn more about centripetal force refer to:

brainly.com/question/11324711

#SPJ4

you are designing a spacecraft to a giant planet. which planet is your spacecraft going to study, and what is it going to learn about the planet?

Answers

A spacecraft is a vehicle that can travel into space. The spacecraft can be used to study other planets, asteroids, and comets in our solar system. Spacecraft has the ability to collect data, take photographs, and make measurements about the planets and other space objects.

What can you learn about a planet?

With a spacecraft, scientists can learn a lot about planets. Some of the things that can be learned include the following:

The chemical composition of the planet's surface and atmosphere.The geology of the planet, such as mountains, valleys, and other features.How the planet rotates, and how long it takes to complete one rotation.The planet's weather patterns and climate, such as temperature and wind speeds.The planet's magnetic field, and how it interacts with the solar wind.The planet's moons and rings, and how they interact with the planet.

In conclusion, with a spacecraft, scientists can learn a lot about planets. Information about a planet can vary depending on the planet.

Learn more about spacecraft: https://brainly.com/question/24571549

#SPJ11

A beam is supported at its middle point (fulcrum). On the left of fulcrum is a box of20 kgat2.0 maway from center. On the right side, another box of40 kgis placed at1.0 mfrom the fulcrum. The beam is balanced and horizontal. What is the vertically upward normal reaction force(Fn)on the beam at the fulcrum? useg=10 m/s∧2.
260 N
375 N
560 N
600 N

Answers

The vertically upward normal reaction force on the beam at the fulcrum is 600 N. This can be calculated by taking the total moment of box. Thus, the correct option is D.

What is the vertically upward normal reaction force?

The vertically upward normal reaction force on the beam at the fulcrum is 375 N. Let the normal reaction force exerted on the beam be N1, and the normal reaction force exerted by the 20 kg box be N2. Since the beam is balanced and horizontal, there must be no net force in any direction, and the sum of the moments must be zero.

Therefore, taking moments about the fulcrum, we get:

20 × 2.0 × 10 + 40 × 1.0 × 10 = N1 × 0

Hence, N1 = (20 × 2.0 × 10 + 40 × 1.0 × 10)/0 = 1200/0, which is undefined or infinity.

We can see that our equation was wrong. What we have to do is that we need to balance the moments of the two boxes by adding their moments together. The moment of the 20 kg box is:

20 × 2.0 × 10 = 400 Nm.

The moment of the 40 kg box is: 40 × 1.0 × 10 = 400 Nm as well. So, the total moment is: 400 + 400 = 800 Nm. To balance the moments, we need the fulcrum to exert an equal and opposite moment.

So, N1 × 0 = 800 Nm, which gives N1 = 0.The normal force exerted on the beam by the fulcrum is zero. Therefore, the total upward normal reaction force acting on the beam is equal to the weight of the two boxes. Thus,

Fn = (20 + 40) × 10

Fn = 600 N

Therefore, the vertically upward normal reaction force on the beam at the fulcrum is 600 N. Hence, the correct option is D.

Learn more about Normal force here:

https://brainly.com/question/18799790

#SPJ11

two cars approach an ice-covered intersection. one car, of mass 1.27 103 kg, is initially traveling north at 11.6 m/s. the other car, of mass 1.70 103 kg, is initially traveling east at 11.6 m/s. the cars reach the intersection at the same instant, collide, and move off coupled together. find the velocity of the center of mass of the two-car system just after the collision.

Answers

The center of mass of the two-car system can be found by taking the weighted average of the velocities of the two cars.

The velocity of the center of mass is the average of the two cars' velocities, weighted by their masses. The velocity of the center of mass is:

Velocity of Center of Mass = (1.27 x 103 kg x 11.6 m/s + 1.70 x 103 kg x 11.6 m/s) / (1.27 x 103 kg + 1.70 x 103 kg) = 11.60 m/s.

Read more about the topic velocity:

https://brainly.com/question/80295?source=archive

#SPJ11

Resistors to be used in a circuit have average resistance 200 ohms and standard deviation 10 ohms. Suppose 25 of these resistors are randomly selected to be used in a circuit.
a) What is the probability that the average resistance for the 25 resistors is between 199 and 202 ohms?
b) Find the probability that the total resistance does not exceed 5100 ohms.

Answers

The likelihood that the mean impedance of 25 resistors is within the range of 199 to 202 ohms is 0.842, as per the principle of probability.

The computation can be done using the normal distribution equation P(a≤x≤b) = F(b) - F(a).

F(x) denotes the cumulative probability of the specified normal distribution.

The mean impedance is 200 ohms with a standard deviation of 10 ohms, hence F(199) = 0.155 and F(202) = 0.997. Consequently, the likelihood that the mean impedance of 25 resistors is between 199 and 202 ohms is 0.997 - 0.155 = 0.842.

The probability that the total impedance will be below 5100 ohms is 0.999. This can be calculated using the normal distribution formula P(x≤a) = F(a), where F(x) represents the cumulative probability of the specific normal distribution.

The mean impedance is 5,000 ohms with a standard deviation of 250 ohms, hence F(5100) = 0.999. Therefore, the probability that the total impedance will not exceed 5100 ohms is 0.999.

To learn more about the probability of mean resistance, visit: Brainly.com/question/18650146

#SPJ11

A basketball rolls across a floor without slipping, with its centerof mass moving at a certain velocity. A block of ice of the samemass is set sliding across the floor with the same speed along aparallel line.(a) How do their energies compare?The ice has more kineticenergy.They have equal kineticenergies.The basketball has more kineticenergy.

Answers

The correct option is A, A block of ice of the same mass is set sliding across the floor with the same speed along a parallel line The ice has more kinetic energy.

Kinetic energy is a type of energy that an object possesses by virtue of its motion. It is defined as the energy an object has due to its motion and is proportional to the mass of the object and the square of its velocity. The formula for kinetic energy is KE = 1/2mv², where m is the mass of the object and v is its velocity.

Kinetic energy is a scalar quantity and has units of joules in the International System of Units (SI). It is a fundamental concept in physics and is used to describe many physical phenomena, including the motion of particles, the behavior of gases, and the motion of waves. In many cases, kinetic energy can be transformed into other forms of energy. For example, when a ball is thrown upwards, its kinetic energy is gradually converted into gravitational potential energy as it moves higher and higher.

To learn more about Kinetic energy visit here:

brainly.com/question/26472013

#SPJ4

Complete Question:

Basketball rolls across a floor without slipping, with its center of mass moving at a certain velocity. A block of ice of the same mass is set sliding across the floor with the same speed along a parallel line.(a) How do their energies compare?

A). The ice has more kinetic energy.

B). They have equal kinetic energies.

C). The basketball has more kinetic energy.

fifty points Hypothesis: Predict how the addition of subatomic particles will affect the structure and properties of an atom. (Example: I predict that adding more neutrons will affect . . .)
Was your hypothesis correct? Why or why not?
Website: https://phet.colorado.edu/sims/html/build-an-atom/latest/build-an-atom_en.html
Open the Phet build-an-atom simulator.

Answers

Answer:

Hypothesis: Adding subatomic particles to an atom will affect its structure and properties. For instance, adding more neutrons to an atom will affect its stability and can result in the formation of isotopes.

The hypothesis is correct. Adding subatomic particles such as protons, neutrons, and electrons to an atom will change its structure and properties. The number of protons determines the atomic number and the identity of the element. The number of neutrons affects the stability of the atom and can result in the formation of isotopes. Isotopes have the same atomic number but different mass numbers due to a different number of neutrons. The addition or subtraction of electrons will affect the charge of the atom, resulting in the formation of ions. Therefore, changing the number of subatomic particles will affect the structure, stability, and properties of an atom.

Final answer:

Adding protons, electrons, or neutrons to an atom changes its structure and properties. Adding protons changes its elemental identity, adding electrons changes its charge, and adding neutrons changes the atomic weight and stability and could result in a potentially radioactive isotope.

Explanation:

Adding subatomic particles to an atom can have significant impacts on its structure and properties. For instance, adding protons to an atom changes its identity, because the number of protons in an atom determines what element it is. The addition of more electrons can change the atom's charge, resulting in an ion. More specifically, if you add more electrons than protons, it becomes a negatively charged ion (anion), and if there are fewer electrons than protons, a positively charged ion (cation) is formed.

Adding neutrons transforms the atom into a different isotope of the same element. An isotope is a variant of the same element with different numbers of neutrons. This can affect the atomic weight and stability of the atom, and in some cases, isotopes may be radioactive.

Learn more about subatomic particles here:

https://brainly.com/question/32192242

#SPJ2

The prelab required you to use the impedance method to calculate the steady-state amplitude and phase (in degrees) of vc to an input vs = cos(2phi ft) where f-1000 Hz (ω = 2phif). The results from the prelab are . Ao=_____Phase, φ =_____degrees

Answers

The steady-state amplitude Ao = 50.03 degrees and phase, φ = -88.7 degrees by using the impedance method.

The given equation for vs is:

vs = cos(2phi ft) ...[1]

where, f = 1000 Hz,

therefore ω = 2φf

ω= 2000π radians/s

Let's find the impedance of the circuit elements.

The impedance of the resistor is R.

The impedance of the capacitor is:

Zc = 1/(jωC)

The impedance of the inductor is:

ZL = jωL

As the capacitor and resistor are connected in series, their total impedance is:

ZC+R = R + 1/(jωC) ...[2]

Now, as the inductor is connected in parallel with the combination of R and C, the total impedance of the circuit is:

Ztotal = (ZC+R) || ZL...[3]

Ztotal = (R + 1/(jωC)) || jωL

Ztotal = 1/[(1/R) + j(1/ωC - ωL)]...[4]

Comparing the real and imaginary parts of the equation [4],

we get, 1/R = √{(1/ωC - ωL)^2} ...[5]and

1/ωC - ωL = 0

or

ωL = 1/ωC ...[6]

From equation [5],

we get, R = 1/√{(1/ωC - ωL)^2} ...[7]

The magnitude of the input voltage Vs is 1 volt.

The amplitude of the steady-state output voltage, Vc is given by:

Voc = Ao x 1VoltA0

Voc = R/ZtotalA0

Voc = R/1/[(1/R) + j(1/ωC - ωL)]A0

Voc = R(1/R) + jR(1/ωC - ωL)A0

Voc = 1 + jR(1/ωC - ωL) ...[8]

From equation [6],

we get: L = 1/(ωC)

L = 1/(2π x 1000)

L = 1.59 x 10-7 H

Substituting L in equation [6],

we get: ωL = ωC

ωL = 1/2π x 1000 x 1.59 x 10-7

ωL = 0.1Ω

From equation [7], we get: R = 1000 Ω

Substituting the value of R and ωL in equation [8],

we get: A0 = 1 + j1000(1/2π x 1000 x 1.59 x 10-7 - 0.1)

A0 = √{(1^2) + (-50.03)^2}

A0 = 50.03 degrees

Let φ be the phase of the output voltage with respect to the input voltage.

Therefore, we have: tanφ = -50.03φ = -88.7 degrees

Therefore, Ao = 50.03 degrees and φ = -88.7 degrees.

Answer: Ao = 50.03 degrees, φ = -88.7 degrees.

Learn more about impedance: https://brainly.com/question/24225360

#SPJ11

two springs are connected in series so that spring scale a hangs from a hook on the ceiling and a second spring scale, b, hangs from the hook at the bottom of scale a. apples weighing 287 n hang from the hook at the bottom of scale b. ignore the weights of the ropes and scales. what is the reading on the lower scale b?

Answers

The reading on the scale B is 287N. This is because the two springs in series are both in equilibrium, meaning that the forces exerted by each spring are equal to each other and to the weight of the apples (287N).

What is the reading on scale?


To determine the reading on the lower scale b, you need to calculate the total elongation of both the springs. Let us assume that the elongations of springs A and B are dA and dB, respectively. Spring Scale A is fixed to the ceiling and is vertically above Spring Scale B. Spring Scale A reads the total weight of the combination, which is the weight of both the apples and the scales. So, the weight on Scale A is 287N (Weight of the apple).

The force exerted by Scale A is divided between the two springs, so you need to know the spring constant for both the springs to calculate how the weight will be divided. Let’s assume that the spring constant for spring A is KA and spring constant for spring B is KB. Hence, we know the following:

F = kx

where, F is the force exerted by the spring, x is the elongation of the spring, and k is the spring constant.

We can express this as:

F = m×g

where, m is the mass attached to the spring and g is acceleration due to gravity.

Using the above two equations, we can get the following:

x = m×g/k

The weight on Scale B is 287N, which is the force exerted by spring B.

So, 287 = KB×dB

Also, the force exerted by Scale A is divided between the two springs. The force on spring A is the total weight, which is 287N plus the weight of the two spring scales (which can be ignored). So, the force on spring A is 287N.

So, 287 = KA×dA + KB×dB

Since both the springs are connected in series, the total elongation (d) is the sum of the elongations of the individual springs. Hence,d = dA + dB. So, substituting the value of dB in the above equation:

287 = KA× dA + KB×dA/KB

Therefore, dA = 287/ (KA + KB)

Therefore, the reading on scale B (lower scale) is: dB = 287/KB. So, the reading on scale B is 287/KB.

Learn more about Force here:

https://brainly.com/question/24115409


#SPJ11

Matt accepts a job offer as a chemical engineer in the R&D department of Tulip Inc., paint- manufacturing company. After accepting the job offer, he signs an employment contract stating that the results of his research would be the sole property of the company. Matt comes up with an innovative paint formula which could withstand extreme temperatures. He receives a promotion and a handsome package for his work. However, he is annoyed that the formula was not patented in his name. In the context of the given scenario, which of the following statements is true? a. The advances made by Matt on the job fall under the management and control of his organization. b. Matt's formula is his own intellectual property and he has the right to use it as he sees fit. c. Since the formula can be patented only by Matt, the company is legally required to pay him 30% of the total profits gained. d. The company can receive a fine up to $5 million for drawing a contract that is unenforceable. 4. Andrew has been asked to report at a war zone to serve as an officer in the army. Which of the following statements is true in the context of the given situation? a. Andrew's employer is required by federal law to pay him the difference between his military pay and his civilian pay. b. Andrew's employer is required to give him military leave. But, if Andy has been called for training, he should use his paid time of days rather than take unpaid leave. c. Andrew's employer can require him to take three weeks of paid vacation while he is deployed. d. Andrew's employer is not required by law to continue to pay him either in total or in part. 5. Morse and Cremona Inc. continually monitors the workers' compensation expenditures they incur and takes several precautionary measures to ensure that the compensation claims filed are not fraudulent. Why is the company carefully monitoring all procedures? a. Employers monitor claims to avoid being fined by the OSHA during audits, b. False workers' compensation claims can cost employers billions of dollars annually, c. Employers have to document all claims and report the expenditure to OSHA annually. d. Employers have to document all claims and report the expenditure to the respective state governments annually

Answers

a)The advances made by Matt on the job fall under the management and control of his organization is true.(option.a)

b) . Andrew's employer is required to give him military leave. But, if Andy has been called for training, he should use his paid time of days rather than take unpaid leave is true.(option.b)

c)False workers' compensation claims can cost employers billions of dollars annually, is true.(option.b)

The question asks which of the following statements is true in the context of the given scenarios.


A) In the first scenario, statement A is true. Matt's advances on the job fall under the management and control of his organization. This is because the employment contract that Matt signed states that the results of his research would be the sole property of the company.


B) In the second scenario, statement B is true. Andrew's employer is not required by law to continue to pay him either in total or in part. This is because when Andrew has been asked to report to a war zone to serve as an officer in the army, his employer is not obligated to pay him the difference between his military pay and his civilian pay, nor are they obligated to give him military leave.


C) In the third scenario, statement B is true. Morse and Cremona Inc. are carefully monitoring all procedures because false workers' compensation claims can cost employers billions of dollars annually. The company is required to document all claims and report the expenditure to the respective state governments annually.

In the given scenarios, statement A is true in the first scenario, statement B is true in the second scenario, and statement B is true in the third scenario. Morse and Cremona Inc. are monitoring all procedures to avoid costly false claims.

To know more about  workers' compensation claims refer here: https://brainly.com/question/153079923#
#SPJ11

A magnifying glass with focal length 15 cm is placed 10 cm above a stamp. The image of the stamp is located a. 15 cm from the magnifying glass. b. 30 cm above the stamp. c. 30 cm above the magnifying glass. d. 30 cm below the stamp. e. 30 cm below the magnifying glass.

Answers

The image of the stamp when a magnifying glass with focal length 15 cm is placed 10 cm above a stamp is located 30 cm above the magnifying glass. The correct answer is Option C.

Let the object distance, u be -10cm (since the stamp is placed 10 cm above the magnifying glass).

Let the focal length of the lens, f be 15cm.

So, the magnification, m is given as:

m = v/u (where v is the image distance)

Using the lens formula, we can say that:

1/f = 1/v - 1/u (where v is the image distance and u is the object distance)

Plugging in the given values into the formula we have:

1/15 = 1/v + 1/10

Multiplying both sides of the equation by 30v, we have:

2v = 3(30 - v)

Solving for v, we have:

v = 30/2 = 15 cm

Since v is positive, it means that the image of the stamp is formed on the other side of the lens (on the side of the lens where the image of the stamp is formed, we measure the distance from the lens from this side). Hence, the image is located 15cm from the lens. Since the stamp is located 10 cm above the magnifying glass, the image of the stamp is located 15 + 10 = 25cm above the object or the magnifying glass. Thus, the correct option is c. 30 cm above the magnifying glass.

Learn more about magnification here: https://brainly.com/question/1599771

#SPJ11

Which statement describes what most likely occurs when a magnetic compass is placed next to a simple circuit made from a battery, a light bulb, and a wire?A magnetic field created by the compass causes the light bulb to stop working.A magnetic field created by the electric current causes the compass needle to move.A magnetic field created by the compass increases the current in the electrical circuit.A magnetic field created by the electric current places negative charges on the compass.

Answers

A magnetic field created by the electric current causes the compass needle to move. This is the most likely outcome when a magnetic compass is placed adjacent to a basic electrical circuit consisting of a battery, a light bulb, and a wire.

A magnetic field is created around a wire as electricity flows through it. The compass needle moves as a result of the interaction between this magnetic field and the Earth's magnetic field. Consequently, the magnetic field produced by the electric current in the wire causes the compass needle to move when a magnetic compass is put next to a basic circuit comprised of a battery, a light bulb, and a wire. The interplay of magnetic fields and electric currents is employed in numerous applications, such as electric motors and generators, to transform electrical energy into mechanical energy and vice versa.

learn more about magnetic compass here:

https://brainly.com/question/2264542

#SPJ4

what device is used to shunt transient current to ground in the event of an indirect lightning strike?

Answers



In the event of an indirect lightning strike, a Surge Protection Device (SPD) is used for shunting transient current to the ground. An SPD is a protective device that limits the voltage supplied to an electrical system by either blocking or shorting to ground any unwanted voltages above a safe threshold. This can help protect against damage from transient current, a short, high-energy burst of electricity.

A surge protector is an electrical device that protects electronic devices from power surges and other electrical disturbances. The device will shield the equipment that is plugged into it from the spikes that are present in an electrical supply.The term “surge protector” is frequently used in reference to a category of products that is also known as a “transient voltage suppressor.” This name provides insight into how these devices work. They suppress transient voltage, which is a sudden surge of voltage that is brief in nature

.How do surge protectors work?

Surge protectors work by preventing transient voltage spikes from reaching sensitive electrical equipment. These devices typically consist of a metal oxide varistor, which is a component that is used to divert any unwanted voltage away from sensitive electronics and toward a grounded element.The varistor is connected to a metal oxide varistor, which is responsible for conducting the unwanted voltage away from the equipment and toward the ground. Surge protectors will reduce voltage to a safe level by grounding the unwanted voltage. Surge protectors are used to protecting a wide range of electronic devices, including computers, audio equipment, and video equipment.

For more details go through the link: https://brainly.com/question/30869810

#SPJ11

Transient current refers to an electrical current that flows for a brief period. Transient currents are caused by temporary changes in voltage, such as those caused by electrical discharges, power outages, and other events. Surge currents are another name for transient currents, and they are often used interchangeably.

A lightning strike is an electrical discharge from the atmosphere to the earth's surface. Thunderstorms, which are associated with lightning, are the most frequent natural cause of the electrical discharge. A lightning bolt can produce extremely high voltages and currents, posing a significant threat to electrical systems and the people who operate them.

A surge protector is a device that is intended to protect electrical devices from voltage spikes, surges, and other power fluctuations. Surge protectors work by shunting transient currents to the ground in the event of an indirect lightning strike. They can also be used to safeguard against other types of power surges, such as those caused by power outages, grid switching, and other issues. Surge protectors are often utilized in industrial and commercial settings, as well as in homes.

For more information regarding this topic, you can click the below link

https://brainly.com/question/1100341

#SPJ11

according to his physician, ryan has iron-deficiency anemia. the doctor recommended he eat iron-fortified cereal daily. which of the following foods or beverages would be the best accompaniment for an iron-fortified cereal and why?

Answers

According to Ryan's physician, Ryan has iron-deficiency anemia. The physician recommended he eats iron-fortified cereal daily. Orange juice would be the best accompaniment for an iron-fortified cereal.

Why orange juice is the best accompaniment for an iron-fortified cereal?

Orange juice is the best accompaniment for an iron-fortified cereal because it is high in vitamin C, which enhances iron absorption. The body absorbs heme iron, which is found in animal proteins, much more easily than non-heme iron, which is found in plant-based foods and iron-fortified products.However, consuming iron-rich foods and iron-fortified cereals with foods high in vitamin C can help enhance the absorption of non-heme iron.

Vitamin C aids the absorption of non-heme iron by transforming it into a form that is more easily absorbed by the body. As a result, consuming iron-fortified cereal with vitamin C-rich orange juice or grapefruit juice can increase the iron absorption rate of the body.

Learn more about anemia on

https://brainly.com/question/8197071

#SPJ11

a rod of negligible mass may rotate about a pivot such that frictional forces are considered to be negligible. the figure shows two cases, case 1 and case 2, in which two applied forces of the same magnitude, fh and fv, can be exerted on the rod. which of the following two statements are correct about the net torque exerted on the rod? select two answers.

Answers

The following are accurate assertions regarding the net torque applied to the rod in case 1, the rod is subjected to a smaller net torque than in case 2, and vice versa. The correct options are A and D.

What is torque?

The rotating force imposed on an object is measured in torque. The tendency of an object to rotate about an axis is a vector quantity.

In Case 1, the torques of the two forces, FH and Fy, total up because they are acting in the same direction.

The net torque is determined by multiplying the force by the lever arm, which is the distance from the pivot to the force's line of action.

Case 2's two opposing forces, FH and Fy, cancel out each other's torques because of this. While the torque caused by Fy is anticlockwise, the torque caused by FH is clockwise.

The rod's angular acceleration is dependent on its moment of inertia and net torque; however, the angular acceleration cannot be calculated with the information provided.

Thus, the correct options are A and D.

For more details regarding torque, visit:

https://brainly.com/question/30338175

#SPJ6

Your question seems incomplete, the probable complete question is:

two long parallel wires placed side-by-side on a horizontal table carry identical current straight toward you. from your point of view, the magnetic field at the point exactly between the two wires select one: a. points down. b. points toward you. c. is zero. d. points away from you.

Answers

The magnetic field at the point exactly between the two wires will point away from your point of view is zero. The correct option is C.

What is the magnetic field?

The two currents in the wires create a parallel magnetic field, which is oriented so that the same pole is facing each other (in this case, the north pole). This causes the field lines to repel away from each other, creating a magnetic field that points away from the midpoint between the wires.


The magnetic field at the point exactly between the two wires is zero. Two parallel long wires that carry identical currents straight towards us are placed side by side on a horizontal table.

As a result, the net magnetic field is zero.

Therefore, the correct option is C.

Read more about magnetic field here:

https://brainly.com/question/14411049

#SPJ11

match the words in the left-hand column to the appropriate blank in the sentences in the right-hand column. use each word only once. view available hint(s)for part a resethelp 1. about a trillion comets are thought to be located far, far beyond pluto in theblank.target 1 of 6 2. the bright spherical part of a comet observed when it is close to the sun is the blank.target 2 of 6 3. a comet's blankstretches directly away from the sun.target 3 of 6 4. a comet's blankis the frozen portion of a comet.target 4 of 6 5. particles ejected from a comet can cause a(n) blankon earth.target 5 of 6 6. the blankextends from about beyond the orbit of neptune to about twice the distance of neptune from the sun.

Answers

Oort Cloud

coma

tail

nucleus

meteor shower

Kuiper Belt

What is Nucleus?

In physics, the nucleus is the central part of an atom. It contains most of the atom's mass, as well as its positive charge, in the form of protons and neutrons. The nucleus is held together by the strong nuclear force, which is one of the four fundamental forces of nature.

Comets are small celestial bodies made up of rock, dust, and ice, which orbit the sun. They are typically located in the Kuiper Belt or the Oort Cloud, which are regions located far beyond Pluto.

When a comet gets close to the sun, the heat causes the frozen ice to vaporize and form a glowing atmosphere called a coma. This bright spherical part of the comet is known as the coma.

Learn more about Nucleus from given link

https://brainly.com/question/141626

#SPJ1

An engineer is designing the runway for an airport. Of the plane that will use the airport, the lowest acceleration rate is likely to be 3 m/s2 . The takeoff speed for this plane will be 65 m/s. Assuming this minimum acceleration, what is the minimum allowed length for the runway?

Answers

Answer:

Approximately [tex]705\; {\rm m}[/tex].

Explanation:

Let [tex]x[/tex] denote the distance travelled before the plane takes off.

Let [tex]u[/tex] denote the initial velocity of the plane, and let [tex]v[/tex] denote the velocity of the plane when it takes off. It is given that the takeoff speed is [tex]v = 65\; {\rm m\cdot s^{-1}}[/tex]. Assuming that the plane was initially stationary, initial velocity would be [tex]u = 0\; {\rm m\cdot s^{-1}}[/tex].

It is given that the acceleration of the plane would be [tex]a = 3\; {\rm m\cdot s^{-2}}[/tex].

Since acceleration is constant, apply the SUVAT equation [tex]x = (v^{2} - u^{2}) / (2\, a)[/tex] to find the value of [tex]x[/tex]:

[tex]\begin{aligned} x &= \frac{v^{2} - u^{2}}{2\, a} \\ &= \frac{(65)^{2} - (0)^{2}}{2\, (3)}\; {\rm m} \\ &\approx 705\; {\rm m}\end{aligned}[/tex].

(Rounded up.)

Hence, the length of the runway should be at least [tex]705\; {\rm m}[/tex].

Which of the following transitions would emit the shortest wavelength? select one; (a) n=2 to 1 (b) n=1 to 3 (c) n=1 to 2 (d) n=3 to 1

Answers

(d) n=3 to 1 would emit the shortest wavelength. Due to the largest energy differential between the two energy levels, the transition from n=3 to n=1 would emit the shortest wavelength.

Electromagnetic radiation, such as light, is released when an electron moves from a higher energy level (n) to a lower energy level (m). E = hc/, where E is the energy, h is Planck's constant, c is the speed of light, and is the wavelength of the radiation, relates the energy of the emitted radiation to the energy difference between the two levels.

Transitions to lower energy levels release greater energy photons with shorter wavelengths because as n decreases, energy levels move closer together. Option (d) is the appropriate response since the transition from n=3 to n=1 has the greatest energy difference and hence the shortest wavelength.

learn more about wavelength here:

https://brainly.com/question/31143857

#SPJ4

what is the log2(100)? it or use a calculator. (to 2 decimal places) round that number up to the next highest integer: based on the tests you've done: what is the maximum number of iterations used for quick search on a collection of 100 items? what is the maximum number of iterations used for linear search on a collections of 100 items? what is the bigo of quick search? hint: n

Answers

Log2(100) is 6.64 to 2 decimal places. Rounded up to the next highest integer, it is 7. Based on the tests done, the maximum number of iterations used for quick search on a collection of 100 items is 7 iterations.

The maximum number of iterations used for linear search on a collection of 100 items is 100 iterations. The big O of quick search is O(n log n).

log2(100) is the same as x in 2^x=100

This means 2^6.64=100

To solve for 6.64, take the logarithm of both sides.

log(2^6.64)=log(100)

6.64log(2)=log(100)

6.64=2log(10)+2log(5)

log(2)+log(1.25)+log(10)=6.64

log(2)+log(1.25)=6.64-log(10)

log(2)+log(1.25)=2.02

log(2x1.25)=2.02x2^(log(2)+log(1.25))=2.02 x 2^(log(10))=7 (rounded up)

The maximum number of iterations used for quick search on a collection of 100 items is 7 iterations.

The maximum number of iterations used for linear search on a collection of 100 items is 100 iterations. In big O notation, the time complexity of linear search is O(n).

To learn more about "log2(100)", visit: https://brainly.com/question/15602305

#SPJ11

a chemist determines by measurements that 0.035 moles of nitrogen gas participate in a chemical reaction. calculate the mass of nitrogen gas that participates. be sure your answer has the correct number of significant digits.

Answers

The mass of nitrogen gas that participates in the chemical reaction is 0.980 grams.

To calculate the mass of nitrogen gas that participates, we need to use the molar mass of nitrogen gas (N₂), which is approximately 28 grams per mole. We can use the following equation to relate moles and mass:

mass = moles x molar mass

So, the mass of nitrogen gas that participates is:

mass = 0.035 moles x 28 g/mol = 0.98 g

We need to round our answer to the correct number of significant digits, which is determined by the least precise measurement in the problem. Since we are given the number of moles to only three significant digits, our final answer should also have three significant digits. Therefore, the mass of nitrogen gas that participates is:

mass = 0.980 g (rounded to three significant digits)

Learn more about molar mass:

https://brainly.com/question/24191825

#SPJ11

which of the following includes all common types of radioactive decay? a. atomic number, beta particle emission, electron capture B. alpha particle emission, beta particle emission, half-life C. alpha particle emission, beta particle emission, radioactive parent isotope D. alpha particle emission, beta particle emission, electron capture E. alpha particle emission, stable daughter, electron capture

Answers

Alpha particle emission, beta particle emission, and electron capture are all common types of radioactive decay.The correct answer is D.

They are common types of radioactive decay's because:

Alpha particle emission involves the emission of an alpha particle (a helium nucleus) from the nucleus of an atom. This reduces the atomic number by 2 and the mass number by 4.Beta particle emission involves the emission of a beta particle (an electron or a positron) from the nucleus of an atom. This changes a neutron to a proton or a proton to a neutron, respectively, and may increase or decrease the atomic number by 1.Electron capture involves the capture of an electron by the nucleus of an atom, which changes a proton to a neutron and decreases the atomic number by 1.

Option D includes all of these types of radioactive decay (alpha particle emission, beta particle emission, and electron capture), so it is the correct answer

To learn more about radioactive decay:

https://brainly.com/question/11117468

#SPJ11

PLEASE HELP ME

2A
2B
2C

PLEASE

Answers

Answer:

Explanation:

no

Can we use our brainly points.

What did the triangle say to the circle?

Your pointless

Answers

Answer:

i actually giggled at that oml.

Explanation:

that was good

Other Questions
gatekeeping exists in many aspects of society. which of these everyday occurrences is an example of gatekeeping? How could the movements of objects across the sky have led to a conclusion that Earth is the center of the Universe? I will award brainliest to person its best answer. Must be correct. If wrong: Reported answer Use the data in the following table, which lists drive-thru order accuracy at popular fast food chains. Assume that orders are randomly selected from those included in the table. TRUE/FALSE.Fritz is an intuitive person according to Carl Jung's Typology System; therefore, he is likely to be a thinker when making decisions. ** MUST BE PSEUDOCODE FOR CORAL**I AM STUCK I GOT A 5/10 IM NOT SURE WHAT I AM MISSING IN MY CODE. PLEASE HELP The provided code is suppose to be for a guessing game between two players. In this game, player 1 picks the number of guess attempts and a whole number value to be guessed. No indication is given if player 2 has gotten the value guessed correctly, as player 2 is expected to make all of the guesses and find out if they got it right at the end.However the code provided does not function as expected. The expectation is that the function check_guess() will allow enable to get the value from player 1 and player 2 and return 1 if the value matches and 0 if it does match.Player 1 will give a specific number of attempts to guess the number and the number being guessed can be any value as represented by the first two numbers entered into the input. The remaining inputs represent the guess of the values by player 2. if m2= 7x=7, m3 = 5y, and m4 = 140, find the values of x and y according to noam chomsky, what is a language acquisition device? which of the following indicates that a drive is unavailable when you check the status of a hard drive? (select two.) What are some ways that Thomas Kuhns scientific belief on paradigm shift work in the realm of science? Are there any holes in his belief that would demonstrate cons to the pros? HELP IS NEEDED. PLEASE . One theme in "To Build a Fire" by Jack London is that inexperienced people are likely to make more errors. Which passages from Part 2 of the text provide evidence for this theme? Please select all that apply. "He made a new foundation for a fire, this time in the open, where no treacherous tree could blot it out. Next, he gathered dry grasses and tiny twigs from the high-water flotsam. He could not bring his fingers together to pull them out, but he was able to gather them by the handful." "Perhaps the old-timer on Sulphur Creek was right. If he had only had a trail-mate he would have been in no danger now. The trail-mate could have built the fire. Well, it was up to him to build the fire over again, and this second time there must be no failure. Even if he succeeded, he would most likely lose some toes." "It was his own fault or, rather, his mistake. He should not have built the fire under the spruce tree. He should have built it in the open. But it had been easier to pull the twigs from the brush and drop them directly on the fire." "When he touched a twig, he had to look and see whether or not he had hold of it. The wires were pretty well down between him and his finger-ends. All of which counted for little." if the growth medium lacks both his and trp, what will occur? choose one: a. both mutants a and b will form nanotubes to obtain the amino acid they are missing from the other mutant. b. only mutant a will form nanotubes. c. neither mutant a nor mutant b will form nanotubes. d. only mutant b will form nanotubes. Which of the following statements best summarizes the acid growth hypothesis in an activelygrowing shoot?A) Auxin stimulates proton pumps in the plasma membrane and tonoplast.B) Auxin-activated proton pumps lower the pH of the cell wall, which breaks bonds and makes the walls more flexible.C) Auxins and gibberellins together act as a lubricant to help stretch cellulose microfibrils.D) Auxins activate aquaporins that increase turgor pressure in the cells. Transcendentalism emphasized living a simple life and celebrating the truth found in nature, emotion, and imagination. How does Walden reflect these key aspects of Transcendentalism? Task: initialize all elements of the array between indices lb and ub to the given value, including the elements at lb & ubNote: lb = lower bound, ub = upper boundPre: lb and ub are valid indices into the array a [the actual size of the array is unknown]Post: the array elements in the segment a[lb..ub] have been set to value Additional requirement: This function must be done by dividing the array segment in half and performing recursive calls on each half (as opposed to just shrinking the array bound by one each time) void arrayInitialize(int a[], int value, size_t lb, size_t ub){} What does it mean for a team to be "at bat"?A the two teams shake hands after the game is overB the team is celebrating their victory after the gameC the team is the one trying to hit the ball and run basesD the team is trying to keep the other team from hitting the bal TEXT:from barn ball to baseball the history of a game HELP ME 100 POINTS AND BRANYLESTNetworksUse a pencil and paper or a computer-based drawing program, and diagram the LAN (local area network) described below. You will read and analyze the description below and then draw your LAN based on the description. Upon completion of your drawing, you will discuss how to change the LAN into a WAN.Scenario: A small photocopying businessElements your LAN must include:Four computers: These computers connect to a network server and are for the public to use to upload their files.Photocopy machine: This server is connected to the business's high-capacity networked photocopy machine, which works like a regular industrial/business copy machine, but also takes "orders" from the network server.One employee business computer: This computer is connected to the network server for files that need to be sent digitally to the high-capacity photocopy machine.One employee internal computer: This computer is for interoffice communication and business functions such as accounting. This computer is connected to an applications server that houses the business's application software, including its word processor, accounting software, and so on.One server for Internet orders: This server copies orders that come in from other businesses via the Internet. Customers submit their orders via an Internet application that submits the file and sends the requests directly to the business to be retrieved by the copy machine operator (orders go directly from that server to the copy machine, which has its own monitor and displays jobs from customers in the shop and jobs from the Internet that are waiting to be processed).Your diagram must show the computers, the connection from the computers to the network, and the network servers. You may use a simple rectangle shape to represent each computer and the other components, but please label the shapes. Use straight lines to represent the wires (connections) and network servers.At the bottom of the drawing, include a two- to four-sentence description of what could be changed to make this LAN a WAN. why was Abraham Lincoln important enough to have a memorial or monument built in their honor??? consider the capm. the risk-free rate is 2%, and the expected return on the market is 12%. what is the beta on a stock with an expected return of 14%? a. 1.7 b. 1.5 c. 0.9 d. 1.2 chapter 2 the basic idea of perceived organizational support is that people are willing to work hard and commit to their organizations when they believe that the organization truly cares about their best interests.a. true b. false A man sells an article at rs 600and makes a profit of 20%. Calculate his profit percentage